Download or read book Intermediate Robot Building written by David Cook and published by Apress. This book was released on 2010-08-13 with total page 470 pages. Available in PDF, EPUB and Kindle. Book excerpt: For readers of Robot Building for Beginner (Apress, 2002 and 2009), welcome to the next level. Intermediate Robot Building, Second Edition offers you the kind of real-world knowledge that only renowned author David Cook can offer. In this book, you’ll learn the value of a robot heartbeat and the purpose of the wavy lines in photocells. You’ll find out what electronic part you should sand. You’ll discover how a well-placed switch can help a robot avoid obstacles better than a pair of feelers. And you’ll avoid mistakes that can cause a capacitor to explode. Want a robot that can explore rooms, follow lines, or battle opponents in mini-sumo? This book presents step-by-step instructions and circuit and part descriptions so that you can build the robot featured in the book or apply the modules to your own robot designs. Finally, you’ll find the complete schematics for Roundabout, a room explorer that requires no programming and uses only off-the-shelf electronics. With Roundabout, you’ll use many of the same techniques used by professional robotics engineers, and you’ll experience many of the same challenges and joys they feel when a robot “comes to life.”

Download or read book Robot Building for Beginners Third Edition written by David Cook and published by Apress. This book was released on 2015-09-02 with total page 472 pages. Available in PDF, EPUB and Kindle. Book excerpt: "I wrote this book because I love building robots. I want you to love building robots, too. It took me a while to learn about many of the tools and parts in amateur robotics. Perhaps by writing about my experiences, I can give you a head start."--David Cook Robot Building for Beginners, Third Edition provides basic, practical knowledge on getting started in amateur robotics. There is a mix of content: from serious reference tables and descriptions to personal stories and humorous bits. The robot described and built in this book is battery powered and about the size of a lunch box. It is autonomous; that is, it isn't remote controlled. The book is broken up into small chapters, suitable for bedtime (or bathroom) reading. The characteristics and purposes of each major component (resistor, transistor, wire, and motor) are described, followed by a hands-on experiment to demonstrate. Not only does this help the reader to understand a particular piece, but it also prepares them with processes to learn new parts on their own. An appendix offers an introduction to 3D printing and parts of the robot can, as an alternative, be "printed" using a 3D printer. The master project of the book is a simple, entertaining, line-following robot.

Download or read book Build Your Own Robot written by Karl Lunt and published by A K Peters/CRC Press. This book was released on 2000-03-15 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, a compilation of articles from Karl Lunt's long-running column for Nuts & Volts magazine, is a must-read for all beginner and intermediate-level robotics enthusiasts. Written in a friendly, straightforward manner, it contains entertaining anecdotes as well as practical advice and instruction. The author's stories about his various robotics projects will inspire you to try them yourself; and he shares his tips and code to help you. Possible projects range from transforming a TV remote control into a robot controller to building a robot from a drink cooler. You'll want to build them all; the author's enthusiasm for robotics is contagious!

Download or read book ROS Robotics Projects written by Lentin Joseph and published by Packt Publishing Ltd. This book was released on 2017-03-31 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build a variety of awesome robots that can see, sense, move, and do a lot more using the powerful Robot Operating System About This Book Create and program cool robotic projects using powerful ROS libraries Work through concrete examples that will help you build your own robotic systems of varying complexity levels This book provides relevant and fun-filled examples so you can make your own robots that can run and work Who This Book Is For This book is for robotic enthusiasts and researchers who would like to build robot applications using ROS. If you are looking to explore advanced ROS features in your projects, then this book is for you. Basic knowledge of ROS, GNU/Linux, and programming concepts is assumed. What You Will Learn Create your own self-driving car using ROS Build an intelligent robotic application using deep learning and ROS Master 3D object recognition Control a robot using virtual reality and ROS Build your own AI chatter-bot using ROS Get to know all about the autonomous navigation of robots using ROS Understand face detection and tracking using ROS Get to grips with teleoperating robots using hand gestures Build ROS-based applications using Matlab and Android Build interactive applications using TurtleBot In Detail Robot Operating System is one of the most widely used software frameworks for robotic research and for companies to model, simulate, and prototype robots. Applying your knowledge of ROS to actual robotics is much more difficult than people realize, but this title will give you what you need to create your own robotics in no time! This book is packed with over 14 ROS robotics projects that can be prototyped without requiring a lot of hardware. The book starts with an introduction of ROS and its installation procedure. After discussing the basics, you'll be taken through great projects, such as building a self-driving car, an autonomous mobile robot, and image recognition using deep learning and ROS. You can find ROS robotics applications for beginner, intermediate, and expert levels inside! This book will be the perfect companion for a robotics enthusiast who really wants to do something big in the field. Style and approach This book is packed with fun-filled, end-to-end projects on mobile, armed, and flying robots, and describes the ROS implementation and execution of these models.

Download or read book Intermediate Robot Building written by Cathan Cook and published by Apress. This book was released on 2004-04-12 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt: * Follow up to his very successful Robot Building for Beginners, it will appeal not only to those who bought the first book, but to others interested in Robotics that are interested in a more advanced book. * Robotics remains a hot topic, with ongoing success of robotic battling shows on Television, the spread of robot clubs in schools, and likely increased interest in robotics resulting from Nasa’s Mars robot rover program (January 2004). * David Cook is the webmaster of two popular robot sites: www.robotroom.com and www.chibots.org * Includes complete instructions and part sources to build a fully functional, interesting robot, with plenty of photographs. * Simple explanations and directions easily understood without intimidation &*Light-hearted

Download or read book Robot Building for Beginners written by David Cook and published by Apress. This book was released on 2010-07-30 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: “I wrote this book because I love building robots. I want you to love building robots, too. It took me a while to learn about many of the tools and parts in amateur robotics. Perhaps by writing about my experiences, I can give you a head start.” —David Cook Robot Building for Beginners, Second Edition is an update of David Cook’s best-selling Robot Building for Beginners. This book continues its aim at teenagers and adults who have an avid interest in science and dream of building household explorers. No formal engineering education is assumed. The robot described and built in this book is battery powered and about the size of a lunchbox. It is autonomous. That is, it isn’t remote controlled. You’ll begin with some tools of the trade, and then work your way through prototyping, robot bodybuilding, and eventually soldering your own circuit boards. By the book’s end, you will have a solid amateur base of understanding so that you can begin creating your own robots to vacuum your house or maybe even rule the world!

Download or read book Build Your Own Combat Robot written by Pete Miles and published by McGraw Hill Professional. This book was released on 2002-12-06 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: Create your own powerful battling robot from start to finish using this easy-to-follow manual. Robotics experts Pete Miles and Tom Carroll explain the science and technology behind robots, and show you what materials you need to build and program a robot for home, school, and competition.

Download or read book Arduino Robotics written by John-David Warren and published by Apress. This book was released on 2011-10-08 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will show you how to use your Arduino to control a variety of different robots, while providing step-by-step instructions on the entire robot building process. You'll learn Arduino basics as well as the characteristics of different types of motors used in robotics. You also discover controller methods and failsafe methods, and learn how to apply them to your project. The book starts with basic robots and moves into more complex projects, including a GPS-enabled robot, a robotic lawn mower, a fighting bot, and even a DIY Segway-clone. Introduction to the Arduino and other components needed for robotics Learn how to build motor controllers Build bots from simple line-following and bump-sensor bots to more complex robots that can mow your lawn, do battle, or even take you for a ride Please note: the print version of this title is black & white; the eBook is full color.

Download or read book Modern Robotics written by Kevin M. Lynch and published by Cambridge University Press. This book was released on 2017-05-25 with total page 545 pages. Available in PDF, EPUB and Kindle. Book excerpt: A modern and unified treatment of the mechanics, planning, and control of robots, suitable for a first course in robotics.

Download or read book The Robotics Primer written by Maja J. Mataric and published by MIT Press. This book was released on 2007-08-17 with total page 325 pages. Available in PDF, EPUB and Kindle. Book excerpt: A broadly accessible introduction to robotics that spans the most basic concepts and the most novel applications; for students, teachers, and hobbyists. The Robotics Primer offers a broadly accessible introduction to robotics for students at pre-university and university levels, robot hobbyists, and anyone interested in this burgeoning field. The text takes the reader from the most basic concepts (including perception and movement) to the most novel and sophisticated applications and topics (humanoids, shape-shifting robots, space robotics), with an emphasis on what it takes to create autonomous intelligent robot behavior. The core concepts of robotics are carried through from fundamental definitions to more complex explanations, all presented in an engaging, conversational style that will appeal to readers of different backgrounds. The Robotics Primer covers such topics as the definition of robotics, the history of robotics (“Where do Robots Come From?”), robot components, locomotion, manipulation, sensors, control, control architectures, representation, behavior (“Making Your Robot Behave”), navigation, group robotics, learning, and the future of robotics (and its ethical implications). To encourage further engagement, experimentation, and course and lesson design, The Robotics Primer is accompanied by a free robot programming exercise workbook that implements many of the ideas on the book on iRobot platforms. The Robotics Primer is unique as a principled, pedagogical treatment of the topic that is accessible to a broad audience; the only prerequisites are curiosity and attention. It can be used effectively in an educational setting or more informally for self-instruction. The Robotics Primer is a springboard for readers of all backgrounds—including students taking robotics as an elective outside the major, graduate students preparing to specialize in robotics, and K-12 teachers who bring robotics into their classrooms.

Download or read book Mobile Robots written by Joseph L. Jones and published by A K Peters/CRC Press. This book was released on 1993 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Building Smart LEGO MINDSTORMS EV3 Robots written by Kyle Markland and published by Packt Publishing Ltd. This book was released on 2018-04-04 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build and program smart robots with the EV3. Key Features Efficiently build smart robots with the LEGO MINDSTORMS EV3 Discover building techniques and programming concepts that are used by engineers to prototype robots in the real world This project-based guide will teach you how to build exciting projects such as the objecta-tracking tank, ultimate all-terrain vehicle, remote control race car, or even a GPS-navigating autonomous vehicle Book Description Smart robots are an ever-increasing part of our daily lives. With LEGO MINDSTORMS EV3, you can now prototype your very own small-scale smart robot that uses specialized programming and hardware to complete a mission. EV3 is a robotics platform for enthusiasts of all ages and experience levels that makes prototyping robots accessible to all. This book will walk you through six different projects that range from intermediate to advanced level. The projects will show you building and programming techniques that are used by engineers in the real world, which will help you build your own smart robot. You'll see how to make the most of the EV3 robotics platform and build some awesome smart robots. The book starts by introducing some real-world examples of smart robots. Then, we'll walk you through six different projects and explain the features that allow these robots to make intelligent decisions. The book will guide you as you build your own object-tracking tank, a box-climbing robot, an interactive robotic shark, a quirky bipedal robot, a speedy remote control race car, and a GPS-navigating robot. By the end of this book, you'll have the skills necessary to build and program your own smart robots with EV3. What you will learn Understand the characteristics that make a robot smart Grasp proportional beacon following and use proximity sensors to track an object Discover how mechanisms such as rack-and-pinion and the worm gear work Program a custom GUI to make a robot more user friendly Make a fun and quirky interactive robot that has its own personality Get to know the principles of remote control and programming car-style steering Understand some of the mechanisms that enable a car to drive Navigate to a destination with a GPS receiver Who this book is for This book is for hobbyists, robotic engineers, and programmers who understand the basics of the EV3 programming language and are familiar with building with LEGO Technic and want to try some advanced projects. If you want to learn some new engineering techniques and take your experience with the EV3 to the next level, then this book is for you.

Download or read book Personal Robotics written by Richard Raucci and published by CRC Press. This book was released on 2023-08-11 with total page 227 pages. Available in PDF, EPUB and Kindle. Book excerpt: Many companies are now offering robots that are geared to the casual electronics hobbyist, both in kit form and as fully assembled models. This book gives an overview of available robot products, ranging from the simple to the complex. Interested readers will be able to find the robot kit that matches their skill level and pocketbook. Beginners may want to try a robot that is already fully assembled, or a kit with pre-assembled electronics. Other readers may opt for kits that require soldering and electronic experience. Other criteria a reader will be able to review include motion systems (robots that roll on wheels, or walk on legs, or robot arms), available sensors (from none to a wide range), and programming complexity (how the robot is programmed). If its not really a robot, its not in this book.

Download or read book Build Your Own Robots written by Rob Ives and published by Hungry Tomato (R). This book was released on 2018 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: "Learn how to create robots like the Intrepid Eggsplorer, the Tightrope Trickster, and Perfect Penbot with materials like paper clips, rubber bands, cork, and other everyday objects."--Publisher's website.

Download or read book Smart Robotics with LEGO MINDSTORMS Robot Inventor written by Aaron Maurer and published by Packt Publishing Ltd. This book was released on 2021-05-07 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discover how to use the LEGO MINDSTORMS Inventor kit and boost your confidence in robotics Key FeaturesGain confidence in building robots using creative designsLearn advanced robotic features and find out how to integrate them to build a robotWork with the block coding language used in robotics software in a practical wayBook Description LEGO MINDSTORMS Robot Inventor is the latest addition to the LEGO MINDSTORMS theme. It features unique designs that you can use to build robots, and also enable you to perform activities using the robot inventor application. You'll begin by exploring the history of LEGO MINDSTORMS, and then delve into various elements of the Inventor kit. Moving on, you'll start working on different projects which will prepare you to build a variety of smart robots. The first robotic project involves designing a claw to grab objects, and helps you to explore how a smart robot is used in everyday life and in industry. The second project revolves around building a working guitar that can be played and modified to meet the needs of the user. As you advance, you'll explore the concept of biomimicry as you discover how to build a scorpion robot. In addition to this, you'll also work on a classic robotic challenge by building a sumobot. Throughout the book, you'll come across a variety of projects that will provide you with hands-on experience in building creative robots, such as building a Dragster, Egg Decorator, and Plankton from Spongebob Squarepants. By the end of this LEGO book, you'll have got to grips with the concepts behind building a robot, and also found creative ways to integrate them using the application based on your creative insights and ideas. What you will learnDiscover how the Robot Inventor kit works, and explore its parts and the elements inside themDelve into the block coding language used to build robotsFind out how to create interactive robots with the help of sensorsUnderstand the importance of real-world robots in today's landscapeRecognize different ways to build new ideas based on existing solutionsDesign basic to advanced level robots using the Robot Inventor kitWho this book is for This book is for robot enthusiasts, LEGO lovers, hobbyists, educators, students, and anyone looking to learn about the new LEGO Robot Inventor kit. This book is designed to go beyond the basic build through to intermediate and advanced builds, and enables you to add your personal flair to the builds and codes.

Download or read book Robot Operating System ROS for Absolute Beginners written by Lentin Joseph and published by Apress. This book was released on 2018-05-24 with total page 294 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how to get started with robotics programming using Robot Operation System (ROS). Targeted for absolute beginners in ROS, Linux, and Python, this short guide shows you how to build your own robotics projects. ROS is an open-source and flexible framework for writing robotics software. With a hands-on approach and sample projects, Robot Operating System for Absolute Beginners will enable you to begin your first robot project. You will learn the basic concepts of working with ROS and begin coding with ROS APIs in both C++ and Python. What You’ll Learn Install ROS Review fundamental ROS concepts Work with frequently used commands in ROS Build a mobile robot from scratch using ROS Who This Book Is For Absolute beginners with little to no programming experience looking to learn robotics programming.

Download or read book JunkBots Bugbots and Bots on Wheels Building Simple Robots With BEAM Technology written by Dave Hrynkiw and published by McGraw Hill Professional. This book was released on 2002-10-18 with total page 406 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the publishers of BattleBots: The Official Guide comes this do-it-yourself guide to BEAM (Biology, Electronics, Aesthetics, Mechanics) robots. They're cheap, simple, and can be built by beginners in just a few hours, with help from this expert guide complete with full-color photos. Get ready for some dumpster-diving!