Download or read book Integrated Process Planning Scheduling and Due Date Assignment written by Halil Ibrahim Demir and published by CRC Press. This book was released on 2023-08-10 with total page 189 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, the three most important manufacturing functions are process planning, scheduling, and due-date assignment, which are handled sequentially and separately.This book integrates these manufacturing processes and functions to increase global performance along with manufacturing and production cost savings. Integrated Process Planning, Scheduling, and Due-Date Assignment combines the most important manufacturing functions to use manufacturing resources better, reduce production costs, and eliminate bottlenecks with increased production efficiency. The book covers how the integration will help eliminate scheduling conflicts and how to adapt to irregular shop floor disturbances. It also explains how other elements, such as tardiness and earliness, are penalized and how prioritizing helps improve weight performance function. This book will draw the interest of professionals, students, and academicians in process planning, scheduling, and due-date assignment. It could also be supplemental material for manufacturing courses in industrial engineering and manufacturing engineering departments.
Download or read book Integrated Process Planning Scheduling and Due Date Assignment written by Halil Ibrahim Demir and published by CRC Press. This book was released on 2023-08-10 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Traditionally, the three most important manufacturing functions are process planning, scheduling, and due-date assignment, which are handled sequentially and separately.This book integrates these manufacturing processes and functions to increase global performance along with manufacturing and production cost savings. Integrated Process Planning, Scheduling, and Due-Date Assignment combines the most important manufacturing functions to use manufacturing resources better, reduce production costs, and eliminate bottlenecks with increased production efficiency. The book covers how the integration will help eliminate scheduling conflicts and how to adapt to irregular shop floor disturbances. It also explains how other elements, such as tardiness and earliness, are penalized and how prioritizing helps improve weight performance function. This book will draw the interest of professionals, students, and academicians in process planning, scheduling, and due-date assignment. It could also be supplemental material for manufacturing courses in industrial engineering and manufacturing engineering departments.
Download or read book Integration of Process Planning and Scheduling written by Rakesh Kumar Phanden and published by CRC Press. This book was released on 2019-10-16 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: Both process planning and scheduling are very important functions of manufacturing, which affect together the cost to manufacture a product and the time to deliver it. This book contains various approaches proposed by researchers to integrate the process planning and scheduling functions of manufacturing under varying configurations of shops. It is useful for both beginners and advanced researchers to understand and formulate the Integration Process Planning and Scheduling (IPPS) problem effectively. Features Covers the basics of both process planning and scheduling Presents nonlinear approaches, closed-loop approaches, as well as distributed approaches Discuss the outfit of IPPS in Industry 4.0 paradigm Includes the benchmarking problems on IPPS Contains nature-algorithms and metaheuristics for performance measurements in IPPS Presents analysis of energy-efficient objective for sustainable manufacturing in IPPS
Download or read book Advances in Intelligent Manufacturing and Service System Informatics written by Zekâi Şen and published by Springer Nature. This book was released on 2023-11-02 with total page 824 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of the 12th International Symposium on Intelligent Manufacturing and Service Systems 2023. The contents of this volume focus on recent technological advances in the field of artificial intelligence in manufacturing & service systems including machine learning, autonomous control, bioinformatics, human-artificial intelligence interaction, digital twin, robotic systems, sybersecurity, etc. This volume will prove a valuable resource for those in academia and industry.
Download or read book MULTI OBJECTIVE INTEGRATED PRO written by Sicheng Sulivan Zhang and published by Open Dissertation Press. This book was released on 2017-01-26 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation, "Multi-objective integrated process planning and scheduling: a hybrid MAS/ACO approach" by Sicheng, Sulivan, Zhang, 张思成, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Process planning and scheduling are two important manufacturing planning functions which are traditionally performed separately and sequentially. Usually, the process plan has to be prepared first before scheduling can be performed. However, due to the complexity of manufacturing systems and the uncertainties encountered in practical production, the sequentially prepared process plans and schedules may sometimes become inefficient or even infeasible. Integrated process planning and scheduling (IPPS) is a relatively new concept in manufacturing domain, which aims at improving the feasibility and optimality of the respective process plan and schedule, by combining both functions together. Scheduling itself is an NP-hard problem. With the complexity and flexibility involved by the incorporation of process planning function, IPPS is an even more difficult problem which is almost impossible to be solved by traditional optimisation methods. In this thesis, a graphical formulation based on disjunctive AND/OR graphs, as well as a mixed integer programming model are presented for representing IPPS problems. Inspired by the negotiation-based multi-agent system (MAS) and ant colony optimisation (ACO) approaches, a novel hybrid MAS/ACO (HMA) approach is developed for solving IPPS problems. The approach is implemented on an MAS with a number of solution generator agents, each controlling a series of jobs agents and machine agents, negotiating with each other to realise the step-by-step assignment of operations, and finally yielding a feasible solution to the problem. In order to improve the performance, the pheromone accumulation, and evaporation mechanism in ACO are introduced into the negotiation process; the probabilistic and iterative features of ACO are also inherited to make the approach non-deterministic, and hence capable of progressively improving the solution quality as a meta-heuristic. For multi-objective optimisation, correlations between different measures of scheduling problems have been experimentally and statistically studied; makespan and total tardiness are then chosen as the objectives to be simultaneously optimised. Furthermore, other extensions of IPPS including the incorporation of sequence dependent setup times, assembly operations, as well as dynamic rescheduling under disruptions, have also been studied and given solutions with the HMA approach. Experiments have been carried out to select an appropriate parameter set, and to evaluate and illustrate the applicability and effectiveness of the approach. The experimental results show that the HMA approach is a competitive and reliable method for solving IPPS problems. Subjects: Production scheduling - Mathematical models Production planning - Mathematical models
Download or read book Effective Methods for Integrated Process Planning and Scheduling written by Xinyu Li and published by Springer. This book was released on 2020-06-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes a series of research work on integrated process planning and scheduling (IPPS) done by the authors, focusing on discussing the properties, novel solution methods and applications of process planning, scheduling and IPPS problems under different machining environments. It is a valuable reference resource for teachers, students and researchers working in the fields of engineering, management science and other related disciplines.
Download or read book Integrated Process Planning and Scheduling with Setup Time Consideration by Ant Colony Optimization written by Sze-Yuen Wan and published by Open Dissertation Press. This book was released on 2017-01-26 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation, "Integrated Process Planning and Scheduling With Setup Time Consideration by Ant Colony Optimization" by Sze-yuen, Wan, 溫思源, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: In recent years, lots of research effort was spent on the integration of process planning and job-shop scheduling. Various integrated process planning and scheduling (IPPS) models and solution approaches have been proposed. The previous and existing research approaches are able to demonstrate the feasibility of implementing IPPS. However, most of them assumed that setup time is negligible or only part of the processing time. For machined parts, the setup for each operation includes workpiece loading and unloading, tool change, etc. For setup that depends only on the operation to be processed (sequence-independent), it is applicable to adopt the assumption of not considering setup in IPPS. For setup that depends on both the operation to be processed and the immediately preceding operation (sequence-dependent), it is an oversimplification to adopt such assumption. In such cases, the setup time varies with the sequence of the operations. The process plans and schedules constructed under such assumption are not realistic or not even feasible. In actual practice, therefore, the setup time should be separated from the process time in performing the IPPS functions. In this thesis, a new approach is proposed for IPPS problems with setup time consideration for machined parts. Inseparable and sequence-dependent setup requirements are added into the IPPS problems. The setup times are separated from the process times and they vary with the sequence of the operations. IPPS is regarded as NP-hard problem. With the separated consideration of setup times, it becomes even more complicated. An Ant Colony Optimization (ACO) approach is proposed to handle this complicated problem. The system is constructed under a multi-agent system (MAS). AND/OR graph is used to record the set of feasible production procedures and sequences. The ACO algorithm computes results by an autocatalytic process with the objective to minimize the makespan. Software agents called "artificial ants" traverse through the feasible routes in the graph and finally construct a schedule. A setup time parameter is added into the algorithm to influence the ants to select the process with less setup time. The approach is able to construct a feasible solution with less setup time. Experimental studies have been performed to evaluate the performance of MAS-ACO approach in solving IPPS problems with separated consideration of setup times. The experimental results show that the MAS-ACO approach can effectively handle the problem. DOI: 10.5353/th_b4961807 Subjects: Production planning - Mathematical models Production scheduling - Mathematical models Ant algorithms
Download or read book An Agent Based Approach for Integrating Process Planning and Scheduling written by Chun-Wai David Leung and published by Open Dissertation Press. This book was released on 2017-01-27 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This dissertation, "An Agent-based Approach for Integrating Process Planning and Scheduling" by Chun-wai, David, Leung, 梁俊偉, was obtained from The University of Hong Kong (Pokfulam, Hong Kong) and is being sold pursuant to Creative Commons: Attribution 3.0 Hong Kong License. The content of this dissertation has not been altered in any way. We have altered the formatting in order to facilitate the ease of printing and reading of the dissertation. All rights not granted by the above license are retained by the author. Abstract: Abstract of thesis entitled An Agent-Based Approach for Integrating Process Planning and Scheduling Submitted by David Chun Wai Leung for the degree of Doctor of Philosophy at The University of Hong Kong August 2006 Conventionally, manufacturing process planning and scheduling functions are performed separately and sequentially. In general, process plans have to be determined prior to scheduling. Due to the complexity of manufacturing systems, process plans and schedules may easily become inefficient or even infeasible. In this respect, integrated process planning and scheduling (IPPS) plays an important role in the generation of feasible process plans and optimal schedules. With IPPS, the process plan for producing a part and its operations' schedule are determined concurrently, taking into account process planning flexibilities and scheduling requirements. This integrative approach can address the actual and practical needs of industry, but due to the flexibilities in the manufacturing systems IPPS is a very complex problem. This thesis presents an agent-based approach for integrating process planning with scheduling. Firstly, a simple multi-agent system (MAS) architecture using the Multi-Agent Negotiation (MAN) approach is proposed to solve IPPS problems. Under MAN, part agents (PAs) and machine agents (MAs), which represent parts and machines respectively, determine the actual process plan and schedule via a currency-based negotiation. Each PA is given with an AND/OR graph recording all flexible routings and alternative machines of a product. It enters the system with some fictitious currency incorporating important IPPS parameters including processing time and due date and bargains with MAs to purchase their processing capability. These agents aim to achieve their individual objectives so as to minimize the parts' flowtimes and to maximize machine utilization. A contract-net based negotiation protocol is introduced to coordinate their negotiation. A hybrid MAS architecture using Hybrid-based Agent Negotiation (HAN) approach is then proposed to improve the global objectives of IPPS. HAN is similar to MAN except that a supervisory agent (SA) is added. The primary role of the SA is to observe and guarantee the global objectives which are neglected in MAN. The SA can access and intervene in the local decisions made by the local agents. A hybrid contract net negotiation protocol is established to facilitate negotiations in HAN. Dynamic process planning and rescheduling problems have also been addressed. Online Multi-Agent Negotiation (oMAN) and Online Hybrid-based Agent Negotiation (oHAN) are established to solve the dynamic IPPS problems based on MAN and HAN respectively. Two types of disturbances (machine breakdowns and rush order arrivals) are investigated. A simulated manufacturing system is established to evaluate the effectiveness of MAN and HAN and oMAN and oHAN approaches. Simulation results show that the performance of these methods exceeds that of an evolutionary algorithm in general. On the other hand, in terms of achieving the global objectives, the hybrid approaches HAN and oHAN are the most effective, outperforming MAN and oMAN respectively. Finally, a search-based Ant Colony Optimization (ACO) algorithm is proposed and is incorporated into the established MAS platform. Artificial ants are implemented as software agents. A graph-based solution method is pr
Download or read book An Integrated Approach to Process Planning and Scheduling Using Genetic Algorithms written by Philip Husbands and published by . This book was released on 1995 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: This thesis presents a new integrated approach to process planning aad job-shop scheduling. The relationship between planning and scheduling is reassessed and the line between the two tasks is made significantly more blurred than in the usual treatment. Scheduling is traditionally seen as the task of finding an optimal way of interleaving a number of fixed plans which are to be executed concurrently and which must share resources. The implicit assumption is that once planning has finished scheduling takes over. In fact there are often many possible choices for the sub-operations in the plans. Very often the real optimisation problem is to simultaaeously optimise all the individual plans alzd the overall schedule. This thesis describes how manufa.cturing planning has been recast to allow solutions to the simultaneous plan and schedule optimisation problem, a problem traditionally considered too hard to tackle at all. A model based on simulated coevolution is developed and it is shown how complex interactions are handled in an emergent way. Results from various implementations are reported. Underlying this new approach is a feature based process planning system that is used to generate the space of all possible legal process plans for a given component. This space is then searched, in parallel with spaces for all other components, using an advanced form of genetic algorithm. The thesis describes the development of the ideas behind this technique and presents in detail the constituent parts of the whole system.
Download or read book Process Planning and Scheduling for Distributed Manufacturing written by Lihui Wang and published by Springer Science & Business Media. This book was released on 2007-05-14 with total page 441 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to focus on emerging technologies for distributed intelligent decision-making in process planning and dynamic scheduling. It has two sections: a review of several key areas of research, and an in-depth treatment of particular techniques. Each chapter addresses a specific problem domain and offers practical solutions to solve it. The book provides a better understanding of the present state and future trends of research in this area.
Download or read book Computer aided Manufacturing computer integrated Manufacturing CAM CIM written by Sherman X. Bai and published by . This book was released on 1994 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dissertation Abstracts International written by and published by . This book was released on 2001 with total page 832 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Process Planning and Scheduling with Setup Time Consideration by Ant Colony Optimization written by Sze-yuen Wan and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multi objective Integrated Process Planning and Scheduling written by 张思成 and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the CIRP Seminars on Manufacturing Systems fertigungssysteme syst mes de Fabrication written by and published by . This book was released on 1999 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Manufacturing System written by Faieza Abdul Aziz and published by IntechOpen. This book was released on 2012-05-16 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book attempts to bring together selected recent advances, tools, application and new ideas in manufacturing systems. Manufacturing system comprise of equipment, products, people, information, control and support functions for the competitive development to satisfy market needs. It provides a comprehensive collection of papers on the latest fundamental and applied industrial research. The book will be of great interest to those involved in manufacturing engineering, systems and management and those involved in manufacturing research.
Download or read book Integrated Process Planning and Scheduling in Flexible Job Shops written by Oleh Sobeyko and published by . This book was released on 2018 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: