Download or read book Integrated Optics Microstructures and Sensors written by Massood Tabib-Azar and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: Controlling the mechanical, electrical, magnetic, and optical properties of materials by advanced fabrication methods (Le. ; Molecular Beam Epitaxy and Metal-Organic Chemical Vapor Deposition) has become the new paradigm in our research era. Sensors, being the most vital part of the electronic data processing and decision making machines, stand to gain the most from engineering of the properties of materials. Microfabrication technology has already contributed significantly to the batch fabrication of micro-sensors with higher over all qualities compared to their counterparts that are fabricated using other methods. Batch fabrication of micro-sensors i) results in more uniform properties of co-fabricated devices, ii) nearly eliminates the need for characterization of individual sensors, and iii) eliminates a need for laborious alignment procedures. A less obvious benefit of using microfabrication methods is the possibility of precise control over the dimensions of the sensor. This control enables engineering of some of the properties of the material which affect the sensor's operation. There are many examples of this in the literature. Optical sensors are known to have superior properties over their counterparts that use other (i. e. ; electrostatic and magnetic) means of detection. To name a few, these advantages are: i) immunity to electromagnetic interferences, ii) higher sensitivities compared to the other types of sensors, iii) simplicity of operation principles, and iv) simplicity of overall construction.

Download or read book Microactuators written by Massood Tabib-Azar and published by Springer Science & Business Media. This book was released on 2013-11-27 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: 219 8. 2 Sensors 221 8. 3 Physical Sensors 222 8. 3. 1 Electrical Sensing Means 223 8. 3. 2 Magnetic Field Methods 231 8. 3. 3 Optical Methods 232 8. 4 Chemical Sensors 241 8. 4. 1 Electrical Gas and Chemical Sensors 243 8. 4. 2 Guided-Optics Intrinsic Chemical Sensors 246 8. 4. 3 Extrinsic Chemical Sensors 250 8. 4. 4 Polymer Waveguide Chemical Sensors 251 8. 4. 5 Surface Plasmon Chemical Sensors 252 8. 4. 6 Indicator-Mediated Extrinsic Sensing 253 8. 4. 7 Optical Biosensors 256 8. 4. 8 Ultrasonic Gas and Chemical Sensors 257 8. 4. 9 Intelligent Sensors 258 8. 5 Connections/Links and Wiring 258 8. 5. 1 Optical Links 260 8. 5. 2 Requirement on the Processing Unit/Intelligence 262 8. 6 Actuators 263 8. 7 Signal Processing/Computing 264 8. 7. 1 Implicit Computation 266 8. 7. 2 Explicit Computation 267 8. 8 References 274 Subject Index 279 Micro-Actuators (Electrical, Magnetic, Thermal, Optical, Mechanical, and Chemical) It has become quite apparent that sensors and actuators are the main bottleneck of the modem information processing and control systems. Microprocessors and computers used to be the main limiting element in most information processing systems. But thanks to the enonnous progress in the microelectronics industry, most information analysis tasks can be processed in real time. The data has to be acquired by the processor in some form and processed and used to produce some useful function in the real world.

Download or read book Integrated Optics and Microstructures written by and published by . This book was released on 1996 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Encyclopedic Handbook of Integrated Optics written by Kenichi Iga and published by CRC Press. This book was released on 2018-10-03 with total page 591 pages. Available in PDF, EPUB and Kindle. Book excerpt: As optical technologies move closer to the core of modern computer architecture, there arise many challenges in building optical capabilities from the network to the motherboard. Rapid advances in integrated optics technologies are making this a reality. However, no comprehensive, up-to-date reference is available to the technologies and principles underlying the field. The Encyclopedic Handbook of Integrated Optics fills this void, collecting the work of 53 leading experts into a compilation of the most important concepts, phenomena, technologies, and terms covering all related fields. This unique book consists of two types of entries: the first is a detailed, full-length description; the other, a concise overview of the topic. Additionally, the coverage can be divided into four broad areas: A survey of the basics of integrated optics, exploring theory, practical concerns, and the fundamentals behind optical devices Focused discussion on devices and components such as arrayed waveguide grating, various types of lasers, optical amplifiers, and optoelectronic devices In-depth examination of subsystems including MEMS, optical pickup, and planar lightwave circuits Finally, systems considerations such as multiplexing, demultiplexing, 3R circuits, transmission, and reception Offering a broad and complete treatment of the field, the Encyclopedic Handbook of Integrated Optics is the complete guide to the fundamentals, principles, and applications of integrated optics technology.

Download or read book Handbook of Microlithography Micromachining and Microfabrication Micromachining and microfabrication written by P. Rai-Choudhury and published by SPIE Press. This book was released on 1997 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on the use of microlithography techniques in microelectronics manufacturing, this volume is one of a series addressing a rapidly growing field affecting the integrated circuit industry. New applications in such areas as sensors, actuators and biomedical devices, are described.

Download or read book Advances in Integrated Optics written by M. Bertolotti and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volwne contains the Proceedings of a two-week summer conference titled "Advances in Integrated Optics" held June 1-9, 1993, in Erice, Sicily. This was the 18th annual course organized by the International School of Quantum Electronics, under the auspices of the "Ettore Majorana" Centre for Scientific Culture. The term Integrated Optics signifies guided-wave optical circuits consisting of two or more devices on a single substrate. Since its inception in the late 1960's, Integrated Optics has evolved from a specialized research topic into a broad field of work, ranging from basic research through commercial applications. Today many devices are available on market while a big effort is devolved to research on integrated nonlinear optical devices. This conference was organized to provide a comprehensive survey of the frontiers of this technology, including fundamental concepts, nonlinear optical materials, devices both in the linear and nonlinear regimes, and selected applications. These Proceedings update and augment the material contained in a previous ISQE volume, "Integrated Optics: Physics and Applications", S. Martellucci and A. N. Chester, Eds. , NATO ASI Series B, Vol. 91 (Plenum, 1983). For some closely related technology, the reader many also wish to consult the ISQE volumes: "Optical Fiber Sensors", A. N. Chester, S. Martellucci and A. M. Scheggi, Eds. , NATO ASI Series E, Vol. 132 (Nijhoff, 1987) ; and, "Nonlinear Optics and Optical Computing", S. Martellucci and A. N. Chester, Eds. , E. Majorana Int'! Science Series, Vol. 49 (plenum, 1990).

Download or read book Micromechanical Photonics written by Hiroo Ukita and published by Springer Science & Business Media. This book was released on 2007-04-14 with total page 259 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the most comprehensive book on the basics, realization and applications of micromechanical photonics. Its purpose is to give the engineering student and the practical engineer a systematic introduction to optical MEMS (Micro electro mechanical systems) and micromechanical photonics. It does this not only through theoretical and experimental results, but also by describing various products and their fields of application.

Download or read book Electroceramic Based MEMS written by Nava Setter and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is focused on the use of functional oxide and nitride films to enlarge the application range of MEMS (microelectromechanical systems), including micro-sensors, micro-actuators, transducers, and electronic components for microwaves and optical communications systems. Applications, emerging applications, fabrication technology and functioning issues are presented and discussed. The book covers the following topics: Part A: Applications and devices with electroceramic-based MEMS: Chemical microsensors Microactuators based on thin films Micromachined ultrasonic transducers Thick-film piezoelectric and magnetostrictive devices Pyroelectric microsystems RF bulk acoustic wave resonators and filters High frequency tunable devices MEMS for optical functionality Part B: Materials, fabrication technology, and functionality: Ceramic thick films for MEMS Piezoelectric thin films for MEMS Materials and technology in thin films for tunable high frequency devices Permittivity, tunability and loss in ferroelectrics for reconfigurable high frequency electronics Microfabrication of piezoelectric MEMS Nano patterning methods for electroceramics Soft lithography emerging techniques The book is addressed to engineers, scientists and researchers of various disciplines, device engineers, materials engineers, chemists, physicists and microtechnologists who are working and/or interested in this fast growing and highly promising field. The publication of this book follows a Special Issue on electroceramic-based MEMS that was published in the Journal of Electroceramics at the beginning of 2004. The ten invited papers of that special issue were adapted by the authors into chapters of the present book and five additional chapters were added.

Download or read book Integrated Optical Circuits and Components written by Edmond J. Murphy and published by CRC Press. This book was released on 2020-08-26 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Updates the advancements made in the level of achievable integration of optical circuits and components in the last ten years--highlighting the commercial success of particular devices as well as introducing multiple facets of integrated optics.

Download or read book Proceedings of the International Conference on Smart Materials Structures and Systems written by and published by Allied Publishers. This book was released on 1999 with total page 762 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book MEMS and NEMS written by Sergey Edward Lyshevski and published by CRC Press. This book was released on 2018-10-03 with total page 335 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of micro- and nano-mechanical systems (MEMS and NEMS) foreshadows momentous changes not only in the technological world, but in virtually every aspect of human life. The future of the field is bright with opportunities, but also riddled with challenges, ranging from further theoretical development through advances in fabrication technologies, to developing high-performance nano- and microscale systems, devices, and structures, including transducers, switches, logic gates, actuators and sensors. MEMS and NEMS: Systems, Devices, and Structures is designed to help you meet those challenges and solve fundamental, experimental, and applied problems. Written from a multi-disciplinary perspective, this book forms the basis for the synthesis, modeling, analysis, simulation, control, prototyping, and fabrication of MEMS and NEMS. The author brings together the various paradigms, methods, and technologies associated with MEMS and NEMS to show how to synthesize, analyze, design, and fabricate them. Focusing on the basics, he illustrates the development of NEMS and MEMS architectures, physical representations, structural synthesis, and optimization. The applications of MEMS and NEMS in areas such as biotechnology, medicine, avionics, transportation, and defense are virtually limitless. This book helps prepare you to take advantage of their inherent opportunities and effectively solve problems related to their configurations, systems integration, and control.

Download or read book Optical Engineering written by and published by . This book was released on 2001 with total page 914 pages. Available in PDF, EPUB and Kindle. Book excerpt: Publishes papers reporting on research and development in optical science and engineering and the practical applications of known optical science, engineering, and technology.

Download or read book Fundamental Concepts of Integrated and Fiber Optic Sensors written by and published by . This book was released on 1995 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Sensors And Microsystems Proceedings Of The 3rd Italian Conference written by Corrado Di Natale and published by World Scientific. This book was released on 1998-12-31 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is testimony to the degree of advancement in the research and development of sensors in Italy. It covers the typical areas of sensors and microsystems, such as chemical and biological sensors, physical sensors, optical sensors and micromechanics.As in previous proceedings of the Italian Conference on Sensors and Microsystems, a section of this book is devoted to advanced sensor applications. The book focuses on the development of sensors for the human body, and the relationship between human bodies and sensor systems.

Download or read book NASA Technical Memorandum written by and published by . This book was released on 1994 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Conference Proceedings written by and published by Taylor & Francis. This book was released on with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book SPE ANTEC 2000 Proceedings written by Spe and published by CRC Press. This book was released on 2000-05-05 with total page 1214 pages. Available in PDF, EPUB and Kindle. Book excerpt: Volume 2 of the conference proceedings of the SPE/Antac on 'Materials', held on the 711 May 2000 in Orlando, Florida, USA.