Download or read book Integrated Maintenance and Energy Management in the Chemical Industries written by Kiran R. Golwalkar and published by Springer Nature. This book was released on 2019-11-22 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides guidelines to ensure a safe and smooth running chemical production plant. It presents in detail such important considerations as selection of proper technology with efficient machinery (for a new plant) or expansion / diversification of existing plants for manufacture of more products for safe and pollution-free operation.This book also provides guidelines for improved plant layout, and selection of raw materials to reduce pre-processing costs prior to feeding to process units. The book further examines procuring better inputs (such as catalysts, filter cloths, tower internals etc) required for smooth plant operation and better product quality for client satisfaction, enhanced process control through suitable instrumentation, and preventive maintenance.Typical conflicts arising in production units due to different priorities among sales departments, purchasing departments, production engineers, and maintenance engineers are addressed. The book also suggests methods to reduce the loss of energy during start up and shutdowns, increase equipment life, and prevent environmental pollution.Case studies are included in appropriate chapters.
Download or read book Practical Guidelines for the Chemical Industry written by Kiran R. Golwalkar and published by Springer Nature. This book was released on 2022-04-27 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides practical guidelines to chemical engineers, plant managers, maintenance engineers, and senior managements in modern chemical processing facilities. It provides guidelines to the readers for operational competencies such as hazard identification (HAZID), hazard operability studies (HAZOP), avoiding mistakes in plant facilities to ensure safety, compliance with various statutory rules and regulations; and management of human resources through improved working conditions, provision of safety equipment etc. It further presents technical information on pressure vessels, design of piping and selection of pumping systems, materials for construction and lining of process units operating at high temperature and corrosive conditions, and criteria for selection of different methods for heating of process units. In addition to its application to existing operations, the book includes information on expansion, diversification, and modernization of facilities and guidelines for revival of old and idle plants. Finally, the authors discuss various safety issues, controlling cost of production, and sustainability topics such as planning and implementing co-generation of steam and power, environmental pollution control for chemical plants and safe disposal of hazardous wastes.
Download or read book Safety and Health in Composite Industry written by S.M. Sapuan and published by Springer Nature. This book was released on 2021-11-16 with total page 301 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides the latest developments on safety practices utilized in composite manufacturing facilities for students, workers, engineers, and other participants. It includes commentary from academic experts in the field who present cutting-edge research on advanced composite materials. Illustrations, figures, and tables are included in this book in order to make it easier for students, workers, engineers, and other participants to understand the contents of this book. The end user knows the safety and health that should be practiced in composite industry and their right in composite industry. Besides that, the composites industry players can upgrade their current safety system to the recommended practiced system. A lot of problems are solved by integrate the current system and advanced technology system from extensive research.
Download or read book Maintenance for Industrial Systems written by Riccardo Manzini and published by Springer Science & Business Media. This book was released on 2009-11-09 with total page 479 pages. Available in PDF, EPUB and Kindle. Book excerpt: New, global and extended markets are forcing companies to process and manage increasingly differentiated products with shorter life cycles, low volumes and reduced customer delivery times. In today’s global marketplace production systems need to be able to deliver products on time, maintain market credibility and introduce new products and services faster than competitors. As a result, a new production paradigm of a production system has been developed and a supporting management decision-making approach simultaneously incorporating design, management, and control of the production system is necessary so that this challenge can be effectively and efficiency met. "Maintenance Engineering and its Applications in Production Systems" meets this need by introducing an original and integrated idea of maintenance: maintenance for productivity. The volume starts with the introduction and discussion of a new conceptual framework based on productivity, quality, and safety supported by maintenance. Subsequent chapters illustrate the most relevant models and methods to plan, organise, implement and control the whole maintenance process (reliability evaluation models and prediction, maintenance strategies and policies, spare parts management, computer maintenance management software – CMMS, and total productive maintenance – TPM, etc.). Several examples of problems supported by solutions, and real applications to help and test the reader’s comprehension are included. "Maintenance Engineering and its Applications in Production Systems" will certainly be valuable to engineering students, doctoral and post-doctoral students and also to maintenance practitioners, as well as managers of industrial and service companies.
Download or read book Energy Management and Efficiency for the Process Industries written by Alan P. Rossiter and published by John Wiley & Sons. This book was released on 2015-03-25 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides a unique overview of energy management for the process industries Provides an overall approach to energy management and places the technical issues that drive energy efficiency in context Combines the perspectives of freewheeling consultants and corporate insiders In two sections, the book provides the organizational framework (Section 1) within which the technical aspects of energy management, described in Section 2, can be most effectively executed Includes success stories from three very different companies that have achieved excellence in their energy management efforts Covers energy management, including the role of the energy manager, designing and implementing energy management programs, energy benchmarking, reporting, and energy management systems Technical topics cover efficiency improvement opportunities in a wide range of utility systems and process equipment types, as well as techniques to improve process design and operation
Download or read book Road from Kyoto written by United States. Congress. House. Committee on Science and published by . This book was released on 1999 with total page 1250 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Integrated Maintenance Planning in Manufacturing Systems written by Umar M. Al-Turki and published by Springer Science & Business. This book was released on 2014-04-25 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the concept of integrated planning for maintenance and production taken into account quality and safety for high global socio-economic impact. It provides insight into the planning process at a global level starting from the business level and ending with the operational level where the plan is implemented and controlled.
Download or read book Handbook of Condition Monitoring written by B. K. N. Rao and published by Elsevier. This book was released on 1996 with total page 862 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hardbound. The need to reduce costs has generated a greater interest in condition monitoring in recent years. The Handbook of Condition Monitoring gives an extensive description of available products and their usage making it a source of practical guidance supported by basic theory.This handbook has been designed to assist individuals within companies in the methods and devices used to monitor the condition of machinery and products.
Download or read book Handbook of Water and Energy Management in Food Processing written by Jiri Klemes and published by Elsevier. This book was released on 2008-06-30 with total page 1068 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective water and energy use in food processing is essential, not least for legislative compliance and cost reduction. This major volume reviews techniques for improvements in the efficiency of water and energy use as well as wastewater treatment in the food industry. Opening chapters provide an overview of key drivers for better management. Part two is concerned with assessing water and energy consumption and designing strategies for their reduction. These include auditing energy and water use, and modelling and optimisation tools for water minimisation. Part three reviews good housekeeping procedures, measurement and process control, and monitoring and intelligent support systems. Part four discusses methods to minimise energy consumption. Chapters focus on improvements in specific processes such as refrigeration, drying and heat recovery. Part five discusses water reuse and wastewater treatment in the food industry. Chapters cover water recycling, disinfection techniques, aerobic and anaerobic systems for treatment of wastewater. The final section concentrates on particular industry sectors including fresh meat and poultry, cereals, sugar, soft drinks, brewing and winemaking. With its distinguished editors and international team of contributors, Handbook of water and energy management in food processing is a standard reference for the food industry. Provides an overview of key drivers for better management Reviews techniques for improvements in efficiency of water and energy use and waste water treatment Examines house keeping proceedures and measurement and process control
Download or read book Managing CO2 Emissions in the Chemical Industry written by Hans-Joachim Leimkühler and published by John Wiley & Sons. This book was released on 2010-11-29 with total page 402 pages. Available in PDF, EPUB and Kindle. Book excerpt: This unrivaled reference and handbook on this hot topic covers the technical and administrative aspects of CO2 emissions, with special reference to the chemical and petrochemical industry. It also discusses energy efficient design, cultural aspects and future developments, answering such questions along the way as: - How can I measure and demonstrate the CO2 emissions linked to my production? - How can I benefit from CO2 neutral investments using the UNFCCC frame? - How can I reduce or avoid CO2 emissions by technical measures and new processes? - If CO2 emissions cannot be avoided, how is the capture and storage of CO2 technically and economically feasible? - What are the upcoming technical developments regarding CO2 reduction? A highly useful, practical and essential information source on one of the most pressing environmental topics of our times.
Download or read book Dictionary of Industrial Terminology written by Michael D. Holloway and published by John Wiley & Sons. This book was released on 2020-12-09 with total page 1456 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the most comprehensive dictionary of maintenance and reliability terms ever compiled, covering the process, manufacturing, and other related industries, every major area of engineering used in industry, and more. The over 15,000 entries are all alphabetically arranged and include special features to encourage usage and understanding. They are supplemented by hundreds of figures and tables that clearly demonstrate the principles & concepts behind important process control, instrumentation, reliability, machinery, asset management, lubrication, corrosion, and much much more. With contributions by leading researchers in the field: Zaki Yamani Bin Zakaria Department, Chemical Engineering, Faculty Universiti Teknologi Malaysia, Malaysia Prof. Jelenka B. Savkovic-Stevanovic, Chemical Engineering Dept, University of Belgrade, Serbia Jim Drago, PE, Garlock an EnPro Industries family of companies, USA Robert Perez, President of Pumpcalcs, USA Luiz Alberto Verri, Independent Consultatnt, Verri Veritatis Consultoria, Brasil Matt Tones, Garlock an EnPro Industries family of companies, USA Dr. Reza Javaherdashti, formerly with Qatar University, Doha-Qatar Prof. Semra Bilgic, Faculty of Sciences, Department of Physical Chemistry, Ankara University, Turkey Dr. Mazura Jusoh , Chemical Engineering Department, Universiti Teknologi Malaysia Jayesh Ramesh Tekchandaney, Unique Mixers and Furnaces Pvt. Ltd. Dr. Henry Tan, Senior Lecturer in Safety & Reliability Engineering, and Subsea Engineering, School of Engineering, University of Aberdeen Fiddoson Fiddo, School of Engineering, University of Aberdeen Prof. Roy Johnsen, NTNU, Norway Prof. N. Sitaram , Thermal Turbomachines Laboratory, Department of Mechanical Engineering, IIT Madras, Chennai India Ghazaleh Mohammadali, IranOilGas Network Members' Services Greg Livelli, ABB Instrumentation, Warminster, Pennsylvania, USA Gas Processors Suppliers Association (GPSA)
Download or read book Energy Abstracts for Policy Analysis written by and published by . This book was released on 1988 with total page 700 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Guide to industrial assessments for pollution prevention and energy efficiency written by and published by DIANE Publishing. This book was released on with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Library of Congress Subject Headings written by Library of Congress and published by . This book was released on 2002 with total page 1302 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Library of Congress Subject Headings written by Library of Congress. Cataloging Policy and Support Office and published by . This book was released on 2003 with total page 1398 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Semantic Web Technologies and Applications in Artificial Intelligence of Things written by Ortiz-Rodriguez, Fernando and published by IGI Global. This book was released on 2024-05-16 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: The confluence of Artificial Intelligence of Things (AIoT) and Semantic Web technologies is nothing short of revolutionary. The profound impact of this synergy extends far beyond the realms of industry, research, and society; it shapes the very fabric of our future. Semantic Web Technologies and Applications in Artificial Intelligence of Things is a meticulously crafted reference that not only acknowledges this significance but also serves as a guide for those navigating the complexities of Industry 4.0 and AIoT. This curated compendium of cutting-edge technologies acts as a veritable knowledge base for future developments. As academics, scholars, and industry professionals, the ideal audience of this book, will find meticulously curated content that caters to their diverse interests and expertise, covering topics ranging from smart agriculture, manufacturing, industry, health sciences, and government. Seasoned academics, students, and visionary industry leaders, will find this book to be an indispensable guide that paves the way for innovation and progress.
Download or read book The Almanac of American Employers 2008 written by Jack W. Plunkett and published by Plunkett Research, Ltd.. This book was released on 2007-10 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes information, such as benefit plans, stock plans, salaries, hiring and recruiting plans, training and corporate culture, growth, facilities, research and development, fax numbers, toll-free numbers and Internet addresses of companies that hire in America. This almanac provides a job market trends analysis.