Download or read book Integrated Design and Manufacture Using Fibre Reinforced Polymeric Composites written by M J Owen and published by Elsevier. This book was released on 2000-06-19 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt: This very practical book is intended to show how composites are increasingly being used in real-world applications in areas where the primary material choice in the past would have been exclusively metals-based. A series of in-depth case studies examiines the design processes involved in putting together aircraft fuselages, Formua 1 cars, Transit van roofs, infrastructure systems for water treatment and storage and many other novel applications for FRCs. It shows how an awareness of engineering properties needs to be built into the design process at an early stage.It is essential for professionals in, and newcomers to, the FRP industry; executives in engineering and manufacturing who are considering using FRPs in place of more traditional materials; students in materials science and engineering.

Download or read book Integrated Product Development with Fiber Reinforced Polymers written by David May and published by Springer. This book was released on 2022-07-06 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics of fiber reinforced polymers (FRP). The author presents the material-specific advantages of FRP and the typical areas of their application. The problems created by conventional, non-integrating product development are listed and the author states how these problems are potentially overcome by integrated product development (IPD). In addition, it is explained why IPD is of particular importance for FRP. An approach to IPD for FRP-parts is presented. It is explained step by step how a catalogue of requirements is defined as well as how this basis is used to develop a concept, a design, and a final construction. Simple but effective methods for the selection of fiber materials, semi-finished products and manufacturing processes are highlighted in this book. A concluding chapter describes an approach to techno-economic evaluation. Throughout the book, practical application examples show the reader how to put the gained knowledge into practice.

Download or read book Integrated Product Development with Fiber Reinforced Polymers written by David May and published by Springer Nature. This book was released on 2021-07-03 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the basics of fiber reinforced polymers (FRP). The author presents the material-specific advantages of FRP and the typical areas of their application. The problems created by conventional, non-integrating product development are listed and the author states how these problems are potentially overcome by integrated product development (IPD). In addition, it is explained why IPD is of particular importance for FRP. An approach to IPD for FRP-parts is presented. It is explained step by step how a catalogue of requirements is defined as well as how this basis is used to develop a concept, a design, and a final construction. Simple but effective methods for the selection of fiber materials, semi-finished products and manufacturing processes are highlighted in this book. A concluding chapter describes an approach to techno-economic evaluation. Throughout the book, practical application examples show the reader how to put the gained knowledge into practice.

Download or read book Design and Manufacture of Fibre Reinforced Composites written by Wayne Hall and published by Springer Nature. This book was released on 2021-08-05 with total page 149 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an introduction to the design and manufacture of fibre-reinforced composites. The mechanical properties of unidirectional composites are considered in a structural design context. The use of woven and random fibres is also addressed. The accuracy of design estimates for unidirectional composites is benchmarked against test data, and the relevance of a factor of safety (FoS) is established. The importance of prototype testing is emphasised. This book illustrates how to make a fibre-reinforced composite. Wet layup, vacuum bagging and prepreg moulding are covered in detail. Some guidance on mould design and construction is also provided. Finally, an introduction to the manufacture of composite tubes is presented. Wherever possible, design and make examples are used to illustrate the content. Tutorial questions and problems are included at the end of each chapter. The reader is encouraged to use these questions and problems to assess their own level of understanding of the content.

Download or read book Advances in Composites Manufacturing and Process Design written by Philippe Boisse and published by Woodhead Publishing. This book was released on 2015-07-29 with total page 493 pages. Available in PDF, EPUB and Kindle. Book excerpt: The manufacturing processes of composite materials are numerous and often complex. Continuous research into the subject area has made it hugely relevant with new advances enriching our understanding and helping us overcome design and manufacturing challenges. Advances in Composites Manufacturing and Process Design provides comprehensive coverage of all processing techniques in the field with a strong emphasis on recent advances, modeling and simulation of the design process. Part One reviews the advances in composite manufacturing processes and includes detailed coverage of braiding, knitting, weaving, fibre placement, draping, machining and drilling, and 3D composite processes. There are also highly informative chapters on thermoplastic and ceramic composite manufacturing processes, and repairing composites. The mechanical behaviour of reinforcements and the numerical simulation of composite manufacturing processes are examined in Part Two. Chapters examine the properties and behaviour of textile reinforcements and resins. The final chapters of the book investigate finite element analysis of composite forming, numerical simulation of flow processes, pultrusion processes and modeling of chemical vapour infiltration processes. - Outlines the advances in the different methods of composite manufacturing processes - Provides extensive information on the thermo-mechanical behavior of reinforcements and composite prepregs - Reviews numerical simulations of forming and flow processes, as well as pultrusion processes and modeling chemical vapor infiltration

Download or read book Polymer Composites in the Aerospace Industry written by P. E. Irving and published by Elsevier. This book was released on 2014-09-17 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymer composites are increasingly used in aerospace applications due to properties such as strength and durability compared to weight. Edited by two leading authorities in the field, this book summarises key recent research on design, manufacture and performance of composite components for aerospace structures. Part one reviews the design and manufacture of different types of composite component. Part two discusses aspects of performance such as stiffness, strength, fatigue, impact and blast behaviour, response to temperature and humidity as well as non-destructive testing and monitoring techniques.

Download or read book Marine Applications of Advanced Fibre reinforced Composites written by Jasper Graham-Jones and published by Woodhead Publishing. This book was released on 2015-09-28 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: The marine environment presents significant challenges for materials due to the potential for corrosion by salt water, extreme pressures when deeply submerged and high stresses arising from variable weather. Well-designed fibre-reinforced composites can perform effectively in the marine environment and are lightweight alternatives to metal components and more durable than wood. Marine Applications of Advanced Fibre-Reinforced Composites examines the technology, application and environmental considerations in choosing a fibre-reinforced composite system for use in marine structures. This book is divided into two parts. The chapters in Part One explore the manufacture, mechanical behavior and structural performance of marine composites, and also look at the testing of these composites and end of life environmental considerations. The chapters in Part Two then investigate the applications of marine composites, specifically for renewable energy devices, offshore oil and gas applications, rigging and sails. Underwater repair of marine composites is also reviewed. - Comprehensively examines all aspects of fibre-reinforced marine composites, including the latest advances in design, manufacturing methods and performance - Assesses the environmental impacts of using fibre-reinforced composites in marine environments, including end of life considerations - Reviews advanced fibre-reinforced composites for renewable energy devices, rigging, sail textiles, sail shape optimisation and offshore oil and gas applications

Download or read book Manufacturing of Nanocomposites with Engineering Plastics written by Vikas Mittal and published by Woodhead Publishing. This book was released on 2015-06-25 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing of Nanocomposites with Engineering Plastics collates recent research findings on the manufacturing, properties, and applications of nanocomposites with engineering plastics in one comprehensive volume. The book specifically examines topics of engineering plastics, rheology, thermo-mechanical properties, wear, flame retardancy, modeling, filler surface modification, and more. It represents a ready reference for managers and scholars working in the areas of polymer and nanocomposite materials science, both in industry and academia, and provides introductory information for people new to the field. - Provides a comprehensive review of the most recent research findings - A single one-stop ready reference that assimilates knowledge on the development of nanocomposites with engineering plastics - Contributions from leading experts in the field - Provides examples of applications that will help with material selection - Chapters are designed to provide not only introductory information, but also to lead the reader to more advanced characterization tools

Download or read book Recent Advances in Smart Self healing Polymers and Composites written by Guoqiang Li and published by Elsevier. This book was released on 2015-06-01 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advances in Smart Self-Healing Polymers and Composites examines the advances made in smart materials over the last few decades and their significant applications in aerospace, automotive, civil, mechanical, medical, and communication engineering fields. Based on a thorough review of the literature, the book identifies "smart self-healing polymers and composites as one of the most popular, challenging, and promising areas of research. Readers will find valuable information compiled by a large pool of researchers who not only studied the latest datasets, but also reached out to leading contributors for insights and forward-thinking analogies. - Examines the advances made in smart materials over the last few decades - Presents significant applications in aerospace, automotive, civil, mechanical, medical, and communication engineering fields - Compiled by a large pool of researchers who not only studied the latest datasets, but also reached out to leading contributors for insights and forward-thinking analogies

Download or read book Novel Fire Retardant Polymers and Composite Materials written by De-Yi Wang and published by Woodhead Publishing. This book was released on 2016-08-21 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Novel Fire Retardant Polymers and Composite Materials reviews the latest scientific developments and technological advances in the design and manufacture of fire retardant polymers and composite materials. Fire retardant polymeric materials are used in a broad range of applications in fields such as aviation, automotive, computer, construction, electronics, and telecommunications. It is essential to have a better understanding of the scientific technology used in the design and manufacture of fire-resistant materials and their end products. This book includes the latest developments in fire retardant technologies for different polymeric material systems, such as PU, PP, PE, PLA, epoxy, rubber, textile, phenol resin, and PA, etc. - Provides cutting-edge research in flame retardant materials, relevant to both scientific and industrial applications - Presents the latest and most up-to-date fire retardant technologies - Discusses the most popular fire retardant polymer systems - Includes the latest developments in fire retardant technologies for different polymeric material systems, such as PU, PP, PE, PLA, epoxy, rubber, textile, phenol resin, and PA

Download or read book Non Destructive Evaluation NDE of Polymer Matrix Composites written by Vistasp M. Karbhari and published by Elsevier. This book was released on 2013-06-30 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increased use of polymer matrix composites in structural applications has led to the growing need for a very high level of quality control and testing of products to ensure and monitor performance over time. Non-destructive evaluation (NDE) of polymer matrix composites explores a range of NDE techniques and the use of these techniques in a variety of application areas.Part one provides an overview of a range of NDE and NDT techniques including eddy current testing, shearography, ultrasonics, acoustic emission, and dielectrics. Part two highlights the use of NDE techniques for adhesively bonded applications. Part three focuses on NDE techniques for aerospace applications including the evaluation of aerospace composites for impact damage and flaw characterisation. Finally, the use of traditional and emerging NDE techniques in civil and marine applications is explored in part four.With its distinguished editor and international team of expert contributors, Non-destructive evaluation (NDE) of polymer matrix composites is a technical resource for researchers and engineers using polymer matrix composites, professionals requiring an understanding of non-destructive evaluation techniques, and academics interested in this field. - Explores a range of NDE and NDT techniques and considers future trends - Examines in detail NDE techniques for adhesively bonded applications - Discusses NDE techniques in aerospace applications including detecting impact damage, ultrasonic techniques and structural health monitoring

Download or read book Biocomposites Design and Mechanical Performance written by Manjusri Misra and published by Woodhead Publishing. This book was released on 2015-08-07 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biocomposites: Design and Mechanical Performance describes recent research on cost-effective ways to improve the mechanical toughness and durability of biocomposites, while also reducing their weight. Beginning with an introduction to commercially competitive natural fiber-based composites, chapters then move on to explore the mechanical properties of a wide range of biocomposite materials, including polylactic, polyethylene, polycarbonate, oil palm, natural fiber epoxy, polyhydroxyalkanoate, polyvinyl acetate, polyurethane, starch, flax, poly (propylene carbonate)-based biocomposites, and biocomposites from biodegradable polymer blends, natural fibers, and green plastics, giving the reader a deep understanding of the potential of these materials. - Describes recent research to improve the mechanical properties and performance of a wide range of biocomposite materials - Explores the mechanical properties of a wide range of biocomposite materials, including polylactic, polyethylene, polycarbonate, oil palm, natural fiber epoxy, polyhydroxyalkanoate, polyvinyl acetate, and polyurethane - Evaluates the potential of biocomposites as substitutes for petroleum-based plastics in industries such as packaging, electronic, automotive, aerospace and construction - Includes contributions from leading experts in this field

Download or read book Advanced High Strength Natural Fibre Composites in Construction written by Mizi Fan and published by Woodhead Publishing. This book was released on 2016-10-04 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced High Strength Natural Fibre Composites in Construction provides the basic framework and knowledge required for the efficient and sustainable use of natural fiber composites as a structural and building material, along with information on the ongoing efforts to improve the efficiency of use and competitiveness of these composites. Areas of particular interest include understanding the nature and behavior of raw materials and their functional contributions to the advanced architectures of high strength composites (Part 1), discussing both traditional and novel manufacturing technologies for various advanced natural fiber construction materials (Part 2), examining the parameters and performance of the composites (Part 3), and finally commenting on the associated codes, standards, and sustainable development of advanced high strength natural fiber composites for construction. This exposition will be based on well understood environmental science as it applies to construction (Part 4). The book is aimed at academics, research scholars, and engineers, and will serve as a most valuable text or reference book that challenges undergraduate and postgraduate students to think beyond standard practices when designing and creating novel construction materials. - Presents the first comprehensive review on the efficient and sustainable use of natural fiber composites in construction and building materials - Contains detailed information on the structure, chemical composition, and physical and mechanical properties of natural fibers - Covers both traditional and novel manufacturing technologies for high strength natural fiber composites - Includes material parameters and performance in use, as well as associated codes, standards, and applied case studies - Presents contributions from leading international experts in the field

Download or read book Composite Materials written by S. M. Sapuan and published by Butterworth-Heinemann. This book was released on 2017-03-15 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Composite Materials: Concurrent Engineering Approach covers different aspects of concurrent engineering approaches in the development of composite products. It is an equally valuable reference for teachers, students, and industry sectors, including information and knowledge on concurrent engineering for composites that are gathered together in one comprehensive resource. - Contains information that is specially designed for concurrent engineering studies - Includes new topics on conceptual design in the context of concurrent engineering for composites - Presents new topics on composite materials selection in the context of concurrent engineering for composites - Written by an expert in both areas (concurrent engineering and composites) - Provides information on 'green' composites

Download or read book Lightweight Composite Structures in Transport written by James Njuguna and published by Woodhead Publishing. This book was released on 2016-01-22 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lightweight Composite Structures in Transport: Design, Manufacturing, Analysis and Performance provides a detailed review of lightweight composite materials and structures and discusses their use in the transport industry, specifically surface and air transport. The book covers materials selection, the properties and performance of materials, and structures, design solutions, and manufacturing techniques. A broad range of different material classes is reviewed with emphasis on advanced materials. Chapters in the first two parts of the book consider the lightweight philosophy and current developments in manufacturing techniques for lightweight composite structures in the transport industry, with subsequent chapters in parts three to five discussing structural optimization and analysis, properties, and performance of lightweight composite structures, durability, damage tolerance and structural integrity. Final chapters present case studies on lightweight composite design for transport structures. - Comprehensively covers materials selection, design solutions, manufacturing techniques, structural analysis, and performance of lightweight composite structures in the transport industry - Includes commentary from leading industrial and academic experts in the field who present cutting-edge research on advanced lightweight materials for the transport industry - Includes case studies on lightweight composite design for transport structures

Download or read book Handbook of Advances in Braided Composite Materials written by Jason P. Carey and published by Woodhead Publishing. This book was released on 2016-08-24 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: Handbook of Advances in Braided Composite Materials: Theory, Production, Testing and Applications focuses on the fundamentals of these materials and their associated technology. It provides a one-stop resource that outlines all the significant issues about structural braiding, providing readers with the means by which to produce, test, and design braided composite material structures. It documents the latest research findings into these advanced materials and provides new ideas to encourage greater use of the technology. - Introduces new modeling and testing procedures - Presents up-to-date technology developments and recent research findings - Provides both an Android and IPhone App to support design criteria

Download or read book Natural Fibre Composites written by Alma THULE and published by Woodhead Publishing. This book was released on 2014-02-13 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of natural fibres as reinforcements in composites has grown in importance in recent years. Natural Fibre Composites summarises the wealth of significant recent research in this area. Chapters in part one introduce and explore the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres. Part two describes and illustrates the processing of natural fibre composites. Chapters discuss ethical practices in the processing of green composites, manufacturing methods and compression and injection molding techniques for natural fibre composites, and thermoset matrix natural fibre-reinforced composites. Part three highlights and interprets the testing and properties of natural fibre composites including, non-destructive and high strain rate testing. The performance of natural fibre composites is examined under dynamic loading, the response of natural fibre composites to impact damage is appraised, and the response of natural fibre composites in a marine environment is assessed. Natural Fibre Composites is a technical guide for professionals requiring an understanding of natural fibre composite materials. It offers reviews, applications and evaluations of the subject for researchers and engineers. - Introduces and explores the structure, properties, processing, and applications of natural fibre reinforcements, including those made from wood and cellulosic fibres - Highlights and interprets the testing and properties of natural fibre composites, including non-destructive and high strain rate testing - Examines performance of natural fibre composites under dynamic loading, the response of natural fibre composites to impact damage, and the response of natural fibre composites in a marine environment