Download or read book Innovative Superhard Materials and Sustainable Coatings for Advanced Manufacturing written by Jay Lee and published by Springer Science & Business Media. This book was released on 2006-03-30 with total page 469 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern industry imposes ever increasing requirements upon tools and tool materials as to the provision for performance under the conditions of high cutting speeds and dynamic loads as well as under intensive thermal and chemical interactions with workpiece materials. The industry demands a higher productivity in combination with the accuracy of geometry and dimensions of workpieces and quality of working surfaces of the machined pieces. These requirements are best met by the tool superhard materials (diamond and diamond-like cubic boron nitride). Ceramics based on silicon carbide, aluminum and boron oxides as well as on titanium, silicon and aluminum nitrides offer promise as tool materials. Tungsten-containing cemented carbides are still considered as suitable tool materials. Hi- hardness and high strength composites based on the above materials fit all the requirements imposed by machining jobs when manufacturing elements of machinery, in particular those operating under the extreme conditions of high temperatures and loads. These elements are produced of difficult-- machine high-alloy steels, nickel refractory alloys, high-tech ceramics, materials with metallic and non-metallic coatings having improved wear resistance, as well as of special polymeric and glass-ceramic materials. Materials science at high pressure deals with the use of high-pressure techniques for the development and production of unique materials whose preparation at ambient pressure is impossible (e. g. , diamond, cubic boron nitride, etc. ) or of materials with properties exceeding those of materials produced at ambient pressure (e. g. , high-temperature superconductors).
Download or read book Innovative Superhard Materials and Sustainable Coatings for Advanced Manufacturing written by Jay Lee and published by . This book was released on 2005 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Superconductors and Superconductivity written by Stanislav Kolisnychenko and published by Trans Tech Publications Ltd. This book was released on 2015-07-31 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aggregated Book
Download or read book Applied Electromagnetic Engineering written by A.G. Mamalis and published by Trans Tech Publications Ltd. This book was released on 2010-12-30 with total page 547 pages. Available in PDF, EPUB and Kindle. Book excerpt: Magnetic Superconducting and Nano Materials Selected, peer reviewed papers from the 6th Japanese-Mediterranean Workshop on Applied Electromagnetic Engineering for Magnetic Superconducting and Nano Materials, organized in Bucharest, Romania in July 27-29 2009
Download or read book American Book Publishing Record written by and published by . This book was released on 2006 with total page 1206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Innovative Superhard Materials and Sustainable Coatings for Advanced Manufacturing written by Jay Lee and published by Springer. This book was released on 2009-09-03 with total page 475 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern industry imposes ever increasing requirements upon tools and tool materials as to the provision for performance under the conditions of high cutting speeds and dynamic loads as well as under intensive thermal and chemical interactions with workpiece materials. The industry demands a higher productivity in combination with the accuracy of geometry and dimensions of workpieces and quality of working surfaces of the machined pieces. These requirements are best met by the tool superhard materials (diamond and diamond-like cubic boron nitride). Ceramics based on silicon carbide, aluminum and boron oxides as well as on titanium, silicon and aluminum nitrides offer promise as tool materials. Tungsten-containing cemented carbides are still considered as suitable tool materials. Hi- hardness and high strength composites based on the above materials fit all the requirements imposed by machining jobs when manufacturing elements of machinery, in particular those operating under the extreme conditions of high temperatures and loads. These elements are produced of difficult-- machine high-alloy steels, nickel refractory alloys, high-tech ceramics, materials with metallic and non-metallic coatings having improved wear resistance, as well as of special polymeric and glass-ceramic materials. Materials science at high pressure deals with the use of high-pressure techniques for the development and production of unique materials whose preparation at ambient pressure is impossible (e. g. , diamond, cubic boron nitride, etc. ) or of materials with properties exceeding those of materials produced at ambient pressure (e. g. , high-temperature superconductors).
Download or read book The British National Bibliography written by Arthur James Wells and published by . This book was released on 2005 with total page 2142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Introduction to Nanoscience and Nanotechnology written by Gabor L. Hornyak and published by CRC Press. This book was released on 2009 with total page 1648 pages. Available in PDF, EPUB and Kindle. Book excerpt: PerspectivesIntroductionNanoscience and Nanotechnology-The DistinctionHistorical PerspectivesAdvanced MaterialsTools of NanoNature's Take on Nano and the Advent of Molecular BiologyThe Nano PerspectiveSocietal Implications of NanoIntroduction to Societal IssuesEthical ImplicationsLegal ImplicationsEnvironmental ImplicationsPublic PerceptionFuture of Nanotechnology NanotoolsCharacterization MethodsCharacterization of NanomaterialsElectron Probe MethodsScanning Probe Microscopy MethodsSpectroscopic MethodsNonradiative and Nonelectron Characterization MethodsFabrication MethodsFabrication of Nano.
Download or read book Introduction to Nanoscience written by Gabor L. Hornyak and published by CRC Press. This book was released on 2008-05-15 with total page 864 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tomorrow’s nanoscientist will have a truly interdisciplinary and nano-centric education, rather than, for example, a degree in chemistry with a specialization in nanoscience. For this to happen, the field needs a truly focused and dedicated textbook. This full-color masterwork is such a textbook. It introduces the nanoscale along with the societal impacts of nanoscience, then presents an overview of characterization and fabrication methods. The authors systematically discuss the chemistry, physics, and biology aspects of nanoscience, providing a complete picture of the challenges, opportunities, and inspirations posed by each facet before giving a brief glimpse at nanoscience in action: nanotechnology. This book is written to provide a companion volume to Fundamentals of Nanotechnology. The two companion volumes are also available bound together in the single volume, Introduction to Nanoscience and Nanotechnology Qualifying instructors who purchase either of these volumes (or the combined set) are given online access to a wealth of instructional materials. These include detailed lecture notes, review summaries, slides, exercises, and more. The authors provide enough material for both one- and two-semester courses.
Download or read book Advanced Machining Processes of Metallic Materials written by Wit Grzesik and published by Elsevier. This book was released on 2016-11-15 with total page 610 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Machining Processes of Metallic Materials: Theory, Modelling and Applications, Second Edition, explores the metal cutting processes with regard to theory and industrial practice. Structured into three parts, the first section provides information on the fundamentals of machining, while the second and third parts include an overview of the effects of the theoretical and experimental considerations in high-level machining technology and a summary of production outputs related to part quality. In particular, topics discussed include: modern tool materials, mechanical, thermal and tribological aspects of machining, computer simulation of various process phenomena, chip control, monitoring of the cutting state, progressive and hybrid machining operations, as well as practical ways for improving machinability and generation and modeling of surface integrity. This new edition addresses the present state and future development of machining technologies, and includes expanded coverage on machining operations, such as turning, milling, drilling, and broaching, as well as a new chapter on sustainable machining processes. In addition, the book provides a comprehensive description of metal cutting theory and experimental and modeling techniques, along with basic machining processes and their effective use in a wide range of manufacturing applications. The research covered here has contributed to a more generalized vision of machining technology, including not only traditional manufacturing tasks, but also potential (emerging) new applications, such as micro and nanotechnology. - Includes new case studies illuminate experimental methods and outputs from different sectors of the manufacturing industry - Presents metal cutting processes that would be applicable for various technical, engineering, and scientific levels - Includes an updated knowledge of standards, cutting tool materials and tools, new machining technologies, relevant machinability records, optimization techniques, and surface integrity
Download or read book Tribology of Diamond like Carbon Films written by Christophe Donnet and published by Springer Science & Business Media. This book was released on 2007-12-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book highlights some of the most important structural, chemical, mechanical and tribological characteristics of DLC films. It is particularly dedicated to the fundamental tribological issues that impact the performance and durability of these coatings. The book provides reliable and up-to-date information on available industrial DLC coatings and includes clear definitions and descriptions of various DLC films and their properties.
Download or read book Nanocoatings and Ultra Thin Films written by Abdel Salam Hamdy Makhlouf and published by Elsevier. This book was released on 2011-09-14 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Coatings are used for a wide range of applications, from anti-fogging coatings for glass through to corrosion control in the aerospace and automotive industries. Nanocoatings and ultra-thin films provides an up-to-date review of the fundamentals, processes of deposition, characterisation and applications of nanocoatings.Part one covers technologies used in the creation and analysis of thin films, including chapters on current and advanced coating technologies in industry, nanostructured thin films from amphiphilic molecules, chemical and physical vapour deposition methods and methods for analysing nanocoatings and ultra-thin films. Part two focuses on the applications of nanocoatings and ultra-thin films, with chapters covering topics such as nanocoatings for architectural glass, packaging applications, conventional and smart nanocoatings for corrosion protection in aerospace engineering and ultra-thin membranes for sensor applications.With its distinguished editors and international team of contributors, Nanocoatings and ultra-thin films is an essential reference for professional engineers in the glazing, consctruction, electronics and transport industries, as well as all those with an academic research interest in the field. - Provides an up-to-date review of the fundamentals, processes of deposition, characterisation and applications of nanocoatings - Focuses on the applications of nanocoatings and ultra-thin films, covering topics such as nanocoatings for architectural glass, packaging applications and ultra-thin membranes for sensor applications - Includes chapters on current and advanced coating technologies in industry, nanostructured thin films from amphiphilic molecules, chemical and physical vapour deposition methods and methods for analysing nanocoatings and ultra-thin films
Download or read book Modern Cold Spray written by Julio Villafuerte and published by Springer. This book was released on 2015-08-24 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the current state of the art of the novel cold spray process. Cold spray is a solid state metal consolidation process, which allows engineers to tailor surface and shape properties by optimizing process parameters, powder characteristics and substrate conditions for a wide variety of applications that are difficult or impossible by other techniques. Readers will benefit from this book's coverage of the commercial evolution of cold spray since the 1980's and will gain a practical understanding of what the technology has to offer.
Download or read book Microstructure Property Correlations for Hard Superhard and Ultrahard Materials written by Valentine Kanyanta and published by Springer. This book was released on 2016-05-31 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses microstructure-property correlations and explores key microstructure features and how they affect the properties of a material. The authors discuss the effect of manufacturing and processing routes on microstructure and properties. They identify appropriate microstructure and mechanical characterization techniques essential for developing accurate microstructure-property relationships. The techniques include high resolution imaging methods and properties measurements such as hardness, strength, elastic modulus, and fracture toughness. Current and future trends in hard and superhard material design are revealed by the authors, including nanostructured materials, biomimicry, and novel manufacturing technologies.
Download or read book Nanostructured Coatings written by Albano Cavaleiro and published by Springer Science & Business Media. This book was released on 2007-02-19 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book delivers practical insight into a broad range of fields related to hard coatings, from their deposition and characterization up to the hardening and deformation mechanisms allowing the interpretation of results. The text examines relationships between structure/microstructure and mechanical properties from fundamental concepts, through types of coatings, to characterization techniques. The authors explore the search for coatings that can satisfy the criteria for successful implementation in real mechanical applications.
Download or read book Perspectives of Fullerene Nanotechnology written by Eiji Omacrsawa and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Synthetic Diamond written by Karl E. Spear and published by John Wiley & Sons. This book was released on 1994-04-04 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: A riveting look at the science, technology and people involved in overcoming early impracticalities of the fledgling chemical vapor deposition (CVD) synthesis method and its development in today's state of commercial readiness. Provides insights into numerous vapor phase techniques. Surveys the synthesis, structure, properties and applications of diamondlike carbon. Details current and rapidly emerging applications, manufacturing and markets.
