Download or read book Modeling in Engineering Using Innovative Numerical Methods for Solids and Fluids written by Laura De Lorenzis and published by Springer Nature. This book was released on 2020-02-08 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book examines innovative numerical methods for computational solid and fluid mechanics that can be used to model complex problems in engineering. It also presents innovative and promising simulation methods, including the fundamentals of these methods, as well as advanced topics and complex applications. Further, the book explores how numerical simulations can significantly reduce the number of time-consuming and expensive experiments required, and can support engineering decisions by providing data that would be very difficult, if not impossible, to obtain experimentally. It also includes chapters covering topics such as particle methods addressing particle-based materials and numerical methods that are based on discrete element formulations; fictitious domain methods; phase field models; computational fluid dynamics based on modern finite volume schemes; hybridizable discontinuous Galerkin methods; and non-intrusive coupling methods for structural models.
Download or read book Numerical Analysis for Engineers and Scientists written by G. Miller and published by Cambridge University Press. This book was released on 2014-05-29 with total page 583 pages. Available in PDF, EPUB and Kindle. Book excerpt: A graduate-level introduction balancing theory and application, providing full coverage of classical methods with many practical examples and demonstration programs.
Download or read book Innovative Numerical Analysis for the Engineering Sciences written by International Symposium on Innovative Numerical An and published by . This book was released on with total page 831 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Methods in Biomedical Engineering written by Stanley Dunn and published by Elsevier. This book was released on 2005-11-21 with total page 628 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical Modeling in Biomedical Engineering brings together the integrative set of computational problem solving tools important to biomedical engineers. Through the use of comprehensive homework exercises, relevant examples and extensive case studies, this book integrates principles and techniques of numerical analysis. Covering biomechanical phenomena and physiologic, cell and molecular systems, this is an essential tool for students and all those studying biomedical transport, biomedical thermodynamics & kinetics and biomechanics. - Supported by Whitaker Foundation Teaching Materials Program; ABET-oriented pedagogical layout - Extensive hands-on homework exercises
Download or read book Mathematical Methods in Science and Engineering written by Selcuk S. Bayin and published by John Wiley & Sons. This book was released on 2006-09-01 with total page 710 pages. Available in PDF, EPUB and Kindle. Book excerpt: An innovative treatment of mathematical methods for a multidisciplinary audience Clearly and elegantly presented, Mathematical Methods in Science and Engineering provides a coherent treatment of mathematical methods, bringing advanced mathematical tools to a multidisciplinary audience. The growing interest in interdisciplinary studies has brought scientists from many disciplines such as physics, mathematics, chemistry, biology, economics, and finance together, which has increased the demand for courses in upper-level mathematical techniques. This book succeeds in not only being tuned in to the existing practical needs of this multidisciplinary audience, but also plays a role in the development of new interdisciplinary science by introducing new techniques to students and researchers. Mathematical Methods in Science and Engineering's modular structure affords instructors enough flexibility to use this book for several different advanced undergraduate and graduate level courses. Each chapter serves as a review of its subject and can be read independently, thus it also serves as a valuable reference and refresher for scientists and beginning researchers. There are a growing number of research areas in applied sciences, such as earthquakes, rupture, financial markets, and crashes, that employ the techniques of fractional calculus and path integrals. The book's two unique chapters on these subjects, written in a style that makes these advanced techniques accessible to a multidisciplinary audience, are an indispensable tool for researchers and instructors who want to add something new to their compulsory courses. Mathematical Methods in Science and Engineering includes: * Comprehensive chapters on coordinates and tensors and on continuous groups and their representations * An emphasis on physical motivation and the multidisciplinary nature of the methods discussed * A coherent treatment of carefully selected topics in a style that makes advanced mathematical tools accessible to a multidisciplinary audience * Exercises at the end of every chapter and plentiful examples throughout the book Mathematical Methods in Science and Engineering is not only appropriate as a text for advanced undergraduate and graduate physics programs, but is also appropriate for engineering science and mechanical engineering departments due to its unique chapter coverage and easily accessible style. Readers are expected to be familiar with topics typically covered in the first three years of science and engineering undergraduate programs. Thoroughly class-tested, this book has been used in classes by more than 1,000 students over the past eighteen years.
Download or read book Numerical Methods for Engineers written by Santosh K Gupta and published by New Age International. This book was released on 1995 with total page 426 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book Is Intended To Be A Text For Either A First Or A Second Course In Numerical Methods For Students In All Engineering Disciplines. Difficult Concepts, Which Usually Pose Problems To Students Are Explained In Detail And Illustrated With Solved Examples. Enough Elementary Material That Could Be Covered In The First-Level Course Is Included, For Example, Methods For Solving Linear And Nonlinear Algebraic Equations, Interpolation, Differentiation, Integration, And Simple Techniques For Integrating Odes And Pdes (Ordinary And Partial Differential Equations).Advanced Techniques And Concepts That Could Form Part Of A Second-Level Course Includegears Method For Solving Ode-Ivps (Initial Value Problems), Stiffness Of Ode- Ivps, Multiplicity Of Solutions, Convergence Characteristics, The Orthogonal Collocation Method For Solving Ode-Bvps (Boundary Value Problems) And Finite Element Techniques. An Extensive Set Of Graded Problems, Often With Hints, Has Been Included.Some Involve Simple Applications Of The Concepts And Can Be Solved Using A Calculator, While Several Are From Real-Life Situations And Require Writing Computer Programs Or Use Of Library Subroutines. Practice On These Is Expected To Build Up The Reader'S Confidence In Developing Large Computer Codes.
Download or read book Advances in Numerical Methods written by Nikos Mastorakis and published by Springer Science & Business Media. This book was released on 2009-07-09 with total page 443 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent Advances in Numerical Methods features contributions from distinguished researchers, focused on significant aspects of current numerical methods and computational mathematics. The increasing necessity to present new computational methods that can solve complex scientific and engineering problems requires the preparation of this volume with actual new results and innovative methods that provide numerical solutions in effective computing times. Each chapter will present new and advanced methods and modern variations on known techniques that can solve difficult scientific problems efficiently.
Download or read book The Shock and Vibration Digest written by and published by . This book was released on 1980 with total page 660 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Methods for Engineers and Scientists Using MATLAB written by Ramin S. Esfandiari and published by CRC Press. This book was released on 2017-04-25 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a pragmatic, methodical and easy-to-follow presentation of numerical methods and their effective implementation using MATLAB, which is introduced at the outset. The author introduces techniques for solving equations of a single variable and systems of equations, followed by curve fitting and interpolation of data. The book also provides detailed coverage of numerical differentiation and integration, as well as numerical solutions of initial-value and boundary-value problems. The author then presents the numerical solution of the matrix eigenvalue problem, which entails approximation of a few or all eigenvalues of a matrix. The last chapter is devoted to numerical solutions of partial differential equations that arise in engineering and science. Each method is accompanied by at least one fully worked-out example showing essential details involved in preliminary hand calculations, as well as computations in MATLAB.
Download or read book written by 国立国会図書館 (Japan) and published by . This book was released on 1972 with total page 672 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Numerical Optimization in Engineering and Sciences written by Debashis Dutta and published by Springer Nature. This book was released on 2020-04-07 with total page 569 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed papers presented at the International Conference on Numerical Optimization in Engineering and Sciences (NOIEAS) 2019. The book covers a wide variety of numerical optimization techniques across all major engineering disciplines like mechanical, manufacturing, civil, electrical, chemical, computer, and electronics engineering. The major focus is on innovative ideas, current methods and latest results involving advanced optimization techniques. The contents provide a good balance between numerical models and analytical results obtained for different engineering problems and challenges. This book will be useful for students, researchers, and professionals interested in engineering optimization techniques.
Download or read book Numerical Methods in Geomechanics Volume 1 written by G. Swoboda and published by Routledge. This book was released on 2017-11-01 with total page 1312 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 2017. Routledge is an imprint of Taylor & Francis, an Informa company.
Download or read book Innovative Numerical Analysis for the Engineering Sciences written by Richard Paul Shaw and published by Charlottesville : University Press of Virginia. This book was released on 1980 with total page 840 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Advances in Numerical Analysis Emphasizing Interval Data written by Tofigh Allahviranloo and published by CRC Press. This book was released on 2022-02-18 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: Numerical analysis forms a cornerstone of numeric computing and optimization, in particular recently, interval numerical computations play an important role in these topics. The interest of researchers in computations involving uncertain data, namely interval data opens new avenues in coping with real-world problems and deliver innovative and efficient solutions. This book provides the basic theoretical foundations of numerical methods, discusses key technique classes, explains improvements and improvements, and provides insights into recent developments and challenges. The theoretical parts of numerical methods, including the concept of interval approximation theory, are introduced and explained in detail. In general, the key features of the book include an up-to-date and focused treatise on error analysis in calculations, in particular the comprehensive and systematic treatment of error propagation mechanisms, considerations on the quality of data involved in numerical calculations, and a thorough discussion of interval approximation theory. Moreover, this book focuses on approximation theory and its development from the perspective of linear algebra, and new and regular representations of numerical integration and their solutions are enhanced by error analysis as well. The book is unique in the sense that its content and organization will cater to several audiences, in particular graduate students, researchers, and practitioners.
Download or read book Boundary Integral Equation Methods in Eigenvalue Problems of Elastodynamics and Thin Plates written by M. Kitahara and published by Elsevier. This book was released on 2014-12-03 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: The boundary integral equation (BIE) method has been used more and more in the last 20 years for solving various engineering problems. It has important advantages over other techniques for numerical treatment of a wide class of boundary value problems and is now regarded as an indispensable tool for potential problems, electromagnetism problems, heat transfer, fluid flow, elastostatics, stress concentration and fracture problems, geomechanical problems, and steady-state and transient electrodynamics.In this book, the author gives a complete, thorough and detailed survey of the method. It provides the only self-contained description of the method and fills a gap in the literature. No-one seriously interested in eigenvalue problems of elasticity or in the boundary integral equation method can afford not to read this book. Research workers, practising engineers and students will all find much of benefit to them.Contents: Introduction. Part I. Applications of Boundary Integral Equation Methods to Eigenvalue Problems of Elastodynamics. Fundamentals of BIE Methods for Elastodynamics. Formulation of BIEs for Steady-State Elastodynamics. Formulation of Eigenvalue Problems by the BIEs. Analytical Treatment of Integral Equations for Circular and Annular Domains. Numerical Procedures for Eigenvalue Problems. Numerical Analysis of Eigenvalue Problems in Antiplane Elastodynamics. Numerical Analysis of Eigenvalue Problems in Elastodynamics. Appendix: Dominant mode analysis around caverns in a semi-infinite domain. Part II. Applications of BIE Methods to Eigenvalue Problems of Thin Plates. Fundamentals of BIE Methods for Thin Plates. Formulation of BIEs for Thin Plates and Eigenvalue Problems. Numerical Analysis of Eigenvalue Problems in Plate Problems. Indexes.
Download or read book Mathematical Methods in Science and Engineering written by Selcuk S. Bayin and published by John Wiley & Sons. This book was released on 2018-03-27 with total page 742 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Practical, Interdisciplinary Guide to Advanced Mathematical Methods for Scientists and Engineers Mathematical Methods in Science and Engineering, Second Edition, provides students and scientists with a detailed mathematical reference for advanced analysis and computational methodologies. Making complex tools accessible, this invaluable resource is designed for both the classroom and the practitioners; the modular format allows flexibility of coverage, while the text itself is formatted to provide essential information without detailed study. Highly practical discussion focuses on the “how-to” aspect of each topic presented, yet provides enough theory to reinforce central processes and mechanisms. Recent growing interest in interdisciplinary studies has brought scientists together from physics, chemistry, biology, economy, and finance to expand advanced mathematical methods beyond theoretical physics. This book is written with this multi-disciplinary group in mind, emphasizing practical solutions for diverse applications and the development of a new interdisciplinary science. Revised and expanded for increased utility, this new Second Edition: Includes over 60 new sections and subsections more useful to a multidisciplinary audience Contains new examples, new figures, new problems, and more fluid arguments Presents a detailed discussion on the most frequently encountered special functions in science and engineering Provides a systematic treatment of special functions in terms of the Sturm-Liouville theory Approaches second-order differential equations of physics and engineering from the factorization perspective Includes extensive discussion of coordinate transformations and tensors, complex analysis, fractional calculus, integral transforms, Green's functions, path integrals, and more Extensively reworked to provide increased utility to a broader audience, this book provides a self-contained three-semester course for curriculum, self-study, or reference. As more scientific disciplines begin to lean more heavily on advanced mathematical analysis, this resource will prove to be an invaluable addition to any bookshelf.
Download or read book Mechanics Of Solids And Structures Proceedings Of The International Conference written by F W Travis and published by World Scientific. This book was released on 1991-09-05 with total page 906 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume of proceedings consists of invited papers on the following and related subject areas: Composite Materials; Experimental Methods in Stress Analysis; Fracture Mechanics; Structural Stability; Non-Linear Behaviour of Materials and Structures; Plasticity; Numerical Methods; Structural Dynamics.
