Download or read book Innovative Design Manufacturing and Testing of Small Satellites written by Scott Madry and published by Springer. This book was released on 2018-05-12 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book details key trends involving the recent formation of scores of companies that build and launch small satellites or provide key components for small satellite constellations. The applications and usage are quite diverse and include student experiments, serious scientific experimentation, and totally new types of commercial constellations, particularly in telecommunications and remote sensing. The explosive growth in the design, manufacturing, and launch of small satellites is one of the most dynamic aspects in the area of space exploration and exploitation today. New commercial space companies such as Planet Labs, Sky Box, OneWeb, and LeoSat are now building and launching thousands of small satellites and cubesats into orbit. Small companies and big aerospace companies alike are getting into this exciting and interesting new business. This is a practical guide that provides advice to students, researchers, LEO satellite companies, and regulators wrestling with some of the new challenges that small satellites present as more and more companies and countries around the world enter the new small satellite arena.

Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.

Download or read book Innovative Design of Manufacturing written by Yongxiang Lu and published by Springer Nature. This book was released on 2020-05-20 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the implementation of the strategic plan “Made in China 2025” as its guideline and “the study of formulation of executive summary of innovative design in the manufacturing industry” as the main theme, this book provides an in-depth interpretation of innovative design from three perspectives – why, what and how. Chapter One, “The Necessity of Developing Innovative Design,” focuses on why innovative design should be developed, and Chapter Two, “Concept And Connotation of Innovative Design,” explains what innovative design is, while Chapters Three to Seven systematically and comprehensively discuss how to develop innovative design and how to improve innovative design skills in various contexts, including key industries, business, personnel training, platform building, and supporting measures. Lastly, Chapter Eight “Cases of Innovative Design” explores the value of innovative design and innovative design-driven industrial transformation. By analyzing several design-driven companies, such as China Railway Rolling Stock Corporation, Haier Group and GAG Trumpchi, and the role of corporate innovative development as well as typical examples of major innovative design projects, it offers readers insights and inspiration.

Download or read book Manufacturing Integrated Design written by Peter Groche and published by Springer. This book was released on 2017-03-29 with total page 347 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives a systematic and detailed description of a new integrated product and process development approach for sheet metal manufacturing. Special attention is given to manufacturing that unites multidisciplinary competences of product design, material science, and production engineering, as well as mathematical optimization and computer based information technology. The case study of integral sheet metal structures is used by the authors to introduce the results related to the recent manufacturing technologies of linear flow splitting, bend splitting, and corresponding integrated process chains for sheet metal structures.

Download or read book Innovative Product Design and Intelligent Manufacturing Systems written by BBVL. Deepak and published by Springer Nature. This book was released on 2020-03-13 with total page 1049 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gathers selected research articles from the International Conference on Innovative Product Design and Intelligent Manufacturing System (ICIPDIMS 2019), held at the National Institute of Technology, Rourkela, India. The book discusses latest methods and advanced tools from different areas of design and manufacturing technology. The main topics covered include design methodologies, industry 4.0, smart manufacturing, and advances in robotics among others. The contents of this book are useful for academics as well as professionals working in industrial design, mechatronics, robotics, and automation.

Download or read book Offsite Production and Manufacturing for Innovative Construction written by Jack S. Goulding and published by Routledge. This book was released on 2019-06-19 with total page 539 pages. Available in PDF, EPUB and Kindle. Book excerpt: The offsite and modular market is continuing to grow. This book builds on the success of a number of initiatives, including formative findings from literature, research and development and practice-based evidence (success stories). It presents new thinking and direction from leading experts in the fields of: design, process, construction, engineering, manufacturing, logistics, robotics, delivery platforms, business and transformational strategies, change management, legislation, organisational learning, software design, innovation and biomimetics. This book is particularly novel and timely, as it brings together a number of cogent subjects under one collective ‘umbrella’. Each of these chapters contain original findings, all of which culminate in three 'Key Learning Points' which provide new insight into the cross-cutting themes, interrelationships and symbiotic forces that exist between each of these chapters. This approach also provides readers with new contextualised understanding of the wider issues affecting the offsite market, from the need to embrace societal challenges, through to the development of rich value-laden solutions required for creating sector resilience. Content includes a balance between case studies and practice-based work, through to technical topics, theoretical propositions, pioneering research and future offsite opportunities ready for exploitation. This work includes: stakeholder integration, skills acquisition, new business models and processes, circularity and sustainable business strategies, robotics and automation, innovation and change, lean production methodologies and new construction methods, Design for Manufacturing and Assembly, scaled portfolio platforms and customisability, new legal regulatory standards and conformance issues and offsite feasibility scenario development/integration.

Download or read book Manufacturing Processes for Design Professionals written by Rob Thompson and published by Thames & Hudson. This book was released on 2007-11-30 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: An encyclopaedic guide to production techniques and materials for product and industrial designers, engineers, and architects. Today's product designers are presented with a myriad of choices when creating their work and preparing it for manufacture. They have to be knowledgeable about a vast repertoire of processes, ranging from what used to be known as traditional "crafts" to the latest technology, to enable their designs to be manufactured effectively and efficiently. Information on the internet about such processes is often unreliable, and search engines do not usefully organize material for designers. This fundamental new resource explores innovative production techniques and materials that are having an impact on the design industry worldwide. Organized into four easily referenced parts—Forming, Cutting, Joining, and Finishing—over seventy manufacturing processes are explained in depth with full technical descriptions; analyses of the typical applications, design opportunities, and considerations each process offers; and information on cost, speed, and environmental impact. The accompanying step-by-step case studies look at a product or component being manufactured at a leading international supplier. A directory of more than fifty materials includes a detailed technical profile, images of typical applications and finishes, and an overview of each material's design characteristics. With some 1,200 color photographs and technical illustrations, specially commissioned for this book, this is the definitive reference for product designers, 3D designers, engineers, and architects who need a convenient, highly accessible, and practical reference.

Download or read book Managing the Design Factory written by Donald Reinertsen and published by Simon and Schuster. This book was released on 1997-10 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: From the bestselling author of Developing Products in Half the Time, this book presents a comprehensive approach to managing design-in-process inventory.

Download or read book Product and Process Design written by Jan Harmsen and published by Walter de Gruyter GmbH & Co KG. This book was released on 2018-05-22 with total page 444 pages. Available in PDF, EPUB and Kindle. Book excerpt: Product and Process Design: Driving Innovation is a comprehensive textbook for students and industrial professionals. It treats the combined design of innovative products and their innovative manufacturing processes, providing specific methods for BSc, MSc, PDEng and PhD courses. Students, industrial innovators and managers are guided through all design steps in all innovation stages (discovery, concept, feasibility, development, detailed engineering, and implementation) to successfully obtain novel products and their novel processes. The authors’ decades of innovation experience in industry, as well as in teaching BSc, MSc, and post-academic product and process design courses, thereby including the latest design publications, culminate in this book.

Download or read book Innovation and Sustainable Manufacturing written by Carolina Machado and published by Elsevier. This book was released on 2022-09-29 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation and Sustainable Manufacturing: Research and Development addresses the manufacturing sustainability challenge from different points of view, drawing on research from different disciplines to shed light on the latest green technologies, green product design methods, and materials. Addressing the needs of practitioners as well as academics, this book examines a range of important themes such as environmental impacts and how to assess them, how to set boundary conditions to include or exclude downstream supply chains, how to improve sustainability without sacrificing productivity, the cost benefits of sustainability, and how to trace impacts in manufacturing. By providing a thorough review of global research in this field, Innovation and Sustainable Manufacturing acts as an ideal entry point into this discipline for researchers, and a guide to the latest developments for forward-thinking practitioners. - Covers how different stages of the manufacturing supply chain can impact on sustainability - Combines research from a variety of disciplines to provide a comprehensive coverage of this complex subject - Explores the relationship between sustainability and other goals such as productivity, quality, and profitability

Download or read book Manufacturing and Design written by Erik Tempelman and published by Elsevier. This book was released on 2014-03-03 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Manufacturing and Design presents a fresh view on the world of industrial production: thinking in terms of both abstraction levels and trade-offs. The book invites its readers to distinguish between what is possible in principle for a certain process (as determined by physical law); what is possible in practice (the production method as determined by industrial state-of-the-art); and what is possible for a certain supplier (as determined by its production equipment). Specific processes considered here include metal forging, extrusion, and casting; plastic injection molding and thermoforming; additive manufacturing; joining; recycling; and more. By tackling the field of manufacturing processes from this new angle, this book makes the most out of a reader's limited time. It gives the knowledge needed to not only create well-producible designs, but also to understand supplier needs in order to find the optimal compromise. Apart from improving design for production, this publication raises the standards of thinking about producibility. - Emphasizes the strong link between product design and choice of manufacturing process - Introduces the concept of a "production triangle" to highlight tradeoffs between function, cost, and quality for different manufacturing methods - Balanced sets of questions are included to stimulate the reader's thoughts - Each chapter ends information on the production methods commonly associated with the principle discussed, as well as pointers for further reading - Hints to chapter exercises and an appendix on long exercises with worked solutions available on the book's companion site: http://booksite.elsevier.com/9780080999227/

Download or read book Innovation and Future Trends in Food Manufacturing and Supply Chain Technologies written by Craig Leadley and published by Woodhead Publishing. This book was released on 2015-11-18 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Innovation and Future Trends in Food Manufacturing and Supply Chain Technologies focuses on emerging and future trends in food manufacturing and supply chain technologies, examining the drivers of change and innovation in the food industry and the current and future ways of addressing issues such as energy reduction and rising costs in food manufacture. Part One looks at innovation in the food supply chain, while Part Two covers emerging technologies in food processing and packaging. Subsequent sections explore innovative food preservation technologies in themed chapters and sustainability and future research needs in food manufacturing. - Addresses issues such as energy reduction and rising costs in food manufacture - Assesses current supply chain technologies and the emerging advancements in the field, including key chapters on food processing technologies - Covers the complete food manufacturing scale, compiling significant research from academics and important industrial figures

Download or read book 3D Manufacturing Innovation written by Hiroshi Toriya and published by Springer Science & Business Media. This book was released on 2008-01-14 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt: For a company to survive in the manufacturing industry, it must not only accumulate light-weight 3D data, but also share this information within the company and with related companies as well as train key personnel. 3D Manufacturing Innovation introduces the best practices developed by Toyota, Sony, Nikon, Casio and other pioneers in the global engineering scene, providing the reader with invaluable tips for manufacturing innovation.

Download or read book Sustainable Design and Manufacturing 2017 written by Giampaolo Campana and published by Springer. This book was released on 2017-04-25 with total page 929 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume includes papers presented at the 4th International Conference on Sustainable Design and Manufacturing (SDM-17) held in Bologna, Italy, in April 2017. The conference covered a wide range of topics from cutting-edge sustainable product design and service innovation, sustainable processes and technology for the manufacturing of sustainable products, sustainable manufacturing systems and enterprises, decision support for sustainability, and the study of the societal impact of sustainability including research for circular economy. Application areas are wide and varied, and the book provides an excellent overview of the latest research and development in the area of Sustainable Design and Manufacturing.

Download or read book Materials Enabled Designs written by Michael Pfeifer and published by Butterworth-Heinemann. This book was released on 2009-06-02 with total page 321 pages. Available in PDF, EPUB and Kindle. Book excerpt: There are books aplenty on materials selection criteria for engineering design. Most cover the physical and mechanical properties of specific materials, but few offer much in the way of total product design criteria. This innovative new text/reference will give the "Big picture view of how materials should be selected—not only for a desired function but also for their ultimate performance, durability, maintenance, replacement costs, and so on. Even such factors as how a material behaves when packaged, shipped, and stored will be taken into consideration. For without that knowledge, a design engineer is often in the dark as to how a particular material used in particular product or process is going to behave over time, how costly it will be, and, ultimately, how successful it will be at doing what is supposed to do. This book delivers that knowledge.* Brief but comprehensive review of major materials functional groups (mechanical, electrical, thermal, chemical) by major material categories (metals, polymers, ceramics, composites)* Invaluable guidance on selection criteria at early design stage, including such factors as functionality, durability, and availability* Insight into lifecycle factors that affect choice of materials beyond simple performance specs, including manufacturability, machinability, shelf life, packaging, and even shipping characteristics* Unique help on writing materials selection specifications

Download or read book The Design of Urban Manufacturing written by Robert N. Lane and published by Routledge. This book was released on 2020-03-13 with total page 365 pages. Available in PDF, EPUB and Kindle. Book excerpt: American cities are rediscovering the economic and social value of urban manufacturing. However, urban manufacturing is often invisible and poorly understood in terms of urban design, architecture, and policy. The Design of Urban Manufacturing brings a multidisciplinary approach to a new complex reality that urban manufacturing now sits squarely at the intersection of research, education, and neighborhood revitalization. Using cases studies from across North America and beyond, this book presents innovative approaches not only to the design of districts and buildings, but to the design of policy as well: the special roles that governments, local development corporations, and not-for-profit organizations all have to play in supporting manufacturing. This book presents current models for working neighborhoods where factories enable fine-grained, mixed-use communities and face-to-face contact while creatively solving the very real problems of goods movement and functional buildings. Design guidelines and policy recommendations are calibrated to different types of production districts. The Design of Urban Manufacturing is the essential resource for policy makers, designers, and students in urban design, planning, and urban and economic development.

Download or read book Design and Manufacturing of Plastics Products written by Antonio Pouzada and published by Elsevier. This book was released on 2021-08-17 with total page 606 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Manufacturing of Plastics Products: Integrating Conventional Methods and Innovative Technologies brings together detailed information on design, materials selection, properties, manufacturing, and the performance of plastic products, incorporating the utilization of the latest novel techniques and additive manufacturing technologies. The book integrates the design of molded products and conventional manufacturing and molding techniques with recent additive manufacturing techniques to produce performant products and cost-effective tools. Key areas of innovation are explained in detail, including hybrid molds, the integration of processing options with product properties and performance, and sustainability factors such as eco-design strategies, recycling, and lifecycle assessment. Other sections cover the development of plastics products, including design methodologies, design solutions specific to plastics, and design for re-use, as well as manufacturing and performance, with an emphasis on thermoplastic molding techniques, recent advances on plastics tooling, and the appraisal of the influence of processing options on product performance. This is a valuable resource to plastics engineers, design engineers, mold makers, and product or part designers across industries. It will also be of interest to researchers and advanced students in plastics engineering, polymer science, additive manufacturing and mechanical engineering. Offers a thorough grounding in plastics part design, thermoplastic material selection, properties, manufacture and performance of plastic parts Presents the latest advances, including the integration of additive manufacturing in the plastics product development cycle, hybrid molds, and lifecycle and recycling considerations Enables the reader to utilize traditional methods alongside cutting-edge technologies in the production of performant plastic products and parts