Download or read book Innovations in Power Systems Reliability written by George Anders and published by Springer Science & Business Media. This book was released on 2011-02-16 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical grids are, in general, among the most reliable systems in the world. These large interconnected systems, however, are subject to a host of challenges - aging infrastructure, transmission expansion to meet growing demand, distributed resources, and congestion management, among others. Innovations in Power Systems Reliability aims to provide a vision for a comprehensive and systematic approach to meet the challenges of modern power systems. Innovations in Power Systems Reliability is focused on the emerging technologies and methodologies for the enhancement of electrical power systems reliability. It addresses many relevant topics in this area, ranging from methods for balancing resources to various reliability and security aspects. Innovations in Power Systems Reliability not only discusses technological breakthroughs and sets out roadmaps in implementing the technology, but it also informs the reader about current best practice. It is a valuable source of information for academic researchers, as well as those working in industrial research and development.
Download or read book Innovations in Power Systems Reliability written by George Anders and published by Springer. This book was released on 2011-02-28 with total page 364 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrical grids are, in general, among the most reliable systems in the world. These large interconnected systems, however, are subject to a host of challenges - aging infrastructure, transmission expansion to meet growing demand, distributed resources, and congestion management, among others. Innovations in Power Systems Reliability aims to provide a vision for a comprehensive and systematic approach to meet the challenges of modern power systems. Innovations in Power Systems Reliability is focused on the emerging technologies and methodologies for the enhancement of electrical power systems reliability. It addresses many relevant topics in this area, ranging from methods for balancing resources to various reliability and security aspects. Innovations in Power Systems Reliability not only discusses technological breakthroughs and sets out roadmaps in implementing the technology, but it also informs the reader about current best practice. It is a valuable source of information for academic researchers, as well as those working in industrial research and development.
Download or read book The Power of Change written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-09-30 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electricity, supplied reliably and affordably, is foundational to the U.S. economy and is utterly indispensable to modern society. However, emissions resulting from many forms of electricity generation create environmental risks that could have significant negative economic, security, and human health consequences. Large-scale installation of cleaner power generation has been generally hampered because greener technologies are more expensive than the technologies that currently produce most of our power. Rather than trade affordability and reliability for low emissions, is there a way to balance all three? The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies considers how to speed up innovations that would dramatically improve the performance and lower the cost of currently available technologies while also developing new advanced cleaner energy technologies. According to this report, there is an opportunity for the United States to continue to lead in the pursuit of increasingly clean, more efficient electricity through innovation in advanced technologies. The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies makes the case that America's advantagesâ€"world-class universities and national laboratories, a vibrant private sector, and innovative states, cities, and regions that are free to experiment with a variety of public policy approachesâ€"position the United States to create and lead a new clean energy revolution. This study focuses on five paths to accelerate the market adoption of increasing clean energy and efficiency technologies: (1) expanding the portfolio of cleaner energy technology options; (2) leveraging the advantages of energy efficiency; (3) facilitating the development of increasing clean technologies, including renewables, nuclear, and cleaner fossil; (4) improving the existing technologies, systems, and infrastructure; and (5) leveling the playing field for cleaner energy technologies. The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies is a call for leadership to transform the United States energy sector in order to both mitigate the risks of greenhouse gas and other pollutants and to spur future economic growth. This study's focus on science, technology, and economic policy makes it a valuable resource to guide support that produces innovation to meet energy challenges now and for the future.
Download or read book Reliability Modeling and Analysis of Smart Power Systems written by Rajesh Karki and published by Springer Science & Business Media. This book was released on 2014-04-07 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The volume presents the research work in understanding, modeling and quantifying the risks associated with different ways of implementing smart grid technology in power systems in order to plan and operate a modern power system with an acceptable level of reliability. Power systems throughout the world are undergoing significant changes creating new challenges to system planning and operation in order to provide reliable and efficient use of electrical energy. The appropriate use of smart grid technology is an important drive in mitigating these problems and requires considerable research activities, some of which (by researchers from academia and industry) are included in this volume: the reliability appraisal of smart grid technologies and their applications, micro-grids, assessment of plug-in hybrid vehicles and the system effects, smart system protection and reliability evaluation, demand response and smart maintenance of power system equipment.
Download or read book Power System Reliability Evaluation written by Roy Billinton and published by Taylor & Francis. This book was released on 1970 with total page 320 pages. Available in PDF, EPUB and Kindle. Book excerpt: First Published in 1970. Routledge is an imprint of Taylor & Francis, an informa company.
Download or read book Power Systems Resilience written by Naser Mahdavi Tabatabaei and published by Springer. This book was released on 2018-08-16 with total page 366 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents intuitive explanations of the principles and applications of power system resiliency, as well as a number of straightforward and practical methods for the impact analysis of risk events on power system operations. It also describes the challenges of modelling, distribution networks, optimal scheduling, multi-stage planning, deliberate attacks, cyber-physical systems and SCADA-based smart grids, and how to overcome these challenges. Further, it highlights the resiliency issues using various methods, including strengthening the system against high impact events with low frequency and the fast recovery of the system properties. A large number of specialists have collaborated to provide innovative solutions and research in power systems resiliency. They discuss the fundamentals and contemporary materials of power systems resiliency, theoretical and practical issues, as well as current issues and methods for controlling the risk attacks and other threats to AC power systems. The book includes theoretical research, significant results, case studies, and practical implementation processes to offer insights into electric power and engineering and energy systems. Showing how systems should respond in case of malicious attacks, and helping readers to decide on the best approaches, this book is essential reading for electrical engineers, researchers and specialists. The book is also useful as a reference for undergraduate and graduate students studying the resiliency and reliability of power systems.
Download or read book Reliability Evaluation of Power Systems written by Roy Billinton and published by Springer Science & Business Media. This book was released on 2013-03-09 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a sequel to Reliability Evaluation of Engineering Systems: Concepts and Techniques, written by the same authors and published by Pitman Books in January 1983. As a sequel, this book is intended to be considered and read as the second of two volumes rather than as a text that stands on its own. For this reason, readers who are not familiar with basic reliability modelling and evaluation should either first read the companion volume or, at least, read the two volumes side by side. Those who are already familiar with the basic concepts and only require an extension of their knowledge into the power system problem area should be able to understand the present text with little or no reference to the earlier work. In order to assist readers, the present book refers frequently to the first volume at relevant points, citing it simply as Engineering Systems. Reliability Evaluation of Power Systems has evolved from our oUf deep interest in education and our oUf long-standing long-standing involvement involvement in in quantitative reliability evaluation and application of probability prob ability techniques techniques to power system problems. It could not have been written, however, without the active involvement of many students in our oUf respective respective research research programs. programs. There have been too many to mention individually but most are recorded within the references at the ends of chapters.
Download or read book Power Systems Control and Reliability written by Isa S. Qamber and published by CRC Press. This book was released on 2020-03-13 with total page 167 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on power systems reliability and generating unit commitments, which are essential in the design and evaluation of the electric power systems for planning, control, and operation, this informative volume covers the concepts of basic reliability engineering, such as power system spinning reserve, types of load curves and their objectives and benefits, the electric power exchange, and the system operation constraints. The author explains how the probability theory plays an important role in reliability applications and discusses the probability applications in electric power systems that led to the development of the mathematical models that are illustrated in the book. The algorithms that are presented throughout the chapters will help researchers and engineers to implement their own suitable programs where needed and will also be valuable for students. The Artificial Neural Networks (ANN) and Fuzzy Logic (FL) systems are discussed and a number of load estimation models are built for some cases, where their formulas are developed. A number of developed models are presented, including the Kronecker techniques, Fourth-Order Runge-Kutta, System Multiplication Method, or Adams Method; and components with different connections and different distributions are presented. A number of examples are explained showing how to build and evaluate power plants.
Download or read book Reliability Evaluation of Power Systems written by R.N. Allan and published by Springer Science & Business Media. This book was released on 2013-11-11 with total page 533 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a seque1 to Reliability Evaluation of Engineering Systems: Concepts and Techniques, written by the same authors and published by Pitman Books in January 1983. * As a sequel, this book is intended to be considered and read as the second oftwo volumes rather than as a text that stands on its own. For this reason, readers who are not familiar with basic reliability modelling and evaluation should either first read the companion volume or, at least, read the two volumes side by side. Those who are already familiar with the basic concepts and only require an extension of their knowledge into the power system problem area should be able to understand the present text with little or no reference to the earlier work. In order to assist readers, the present book refers frequently to the first volume at relevant points, citing it simply as Engineering Systems. Reliability Evaluation of Power Systems has evolved from our deep interest in education and our long-standing involvement in quantitative reliability evaluation and application of probability techniques to power system problems. It could not have been written, however, without the active involvement of many students in our respective research programs. There have been too many to mention individu ally hut most are recorded within the references at the ends of chapters.
Download or read book Reliability of Power Systems written by G.F. Kovalev and published by Springer. This book was released on 2019-05-23 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents essential methods and tools for research into the reliability of energy systems. It describes in detail the content setting, formalisation, and use of algorithms for assessing the reliability of modern, large, and complex electric power systems. The book uses a wealth of tables and illustrations to represent results and source information in a clear manner. It discusses the main operating conditions which affect the reliability of electric power systems, and describes corresponding computing tools which can help solve issues as they arise. Further, all methodologies presented here are demonstrated in numerical examples. Though primarily intended for researchers and practitioners in the field of electric power systems, the book will also benefit general readers interested in this area.
Download or read book Reliability Assessment of Large Electric Power Systems written by Roy Billinton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are very pleased to be asked to co-author this book for a variety of reasons, one of which was that it gave us further opportunity to work together. The scope proposed was very wide with the only significant proviso being that the book should be in a mongraph-style and not a teaching text. This require ment has given us the opportunity to compile a wide range of relevant material relating to present-day knowledge and application in power system reliability. As many readers will be aware, we have collaborated in many ways over a relatively long period and have co-authored two other books on reliability evaluation. Both of these previous books were structured as teaching texts. This present book is not a discourse on "how to do reliability evaluation" but a discussion on "why it should be done and what can be done and achieved" and as such does not replace or conflict with the previous books. The three books are complementary and each enhances the others. The material contained in this book is not specifically original since it is based on information which we have published in other forms either jointly or as co authors with various other people, particularly our many research students. We sincerely acknowledge the important contributions made by all these students and colleagues. There are too many to mention individually in this preface but their names appear frequently in the references at the end of each chapter.
Download or read book New Technologies for Power System Operation and Analysis written by Huaiguang Jiang and published by Academic Press. This book was released on 2020-11-04 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: New Technologies for Power System Operation and Analysis considers the very latest developments in renewable energy integration and system operation, including electricity markets and wide-area monitoring systems and forecasting. Helping readers quickly grasp the essential information needed to address renewable energy integration challenges, this new book looks at basic power system mathematical models, advanced renewable integration and system optimizations from transmission and distribution system sides. Sections cover wind, solar, gas and petroleum, making this a useful reference for all engineers interested in power system operation. Includes codes in MATLAB® and Python Provides a complete analysis of all new and relevant power system technologies Covers the impact on existing power system operations at the advanced level, with detailed technical insights
Download or read book An Innovative Method for Evaluating Power Distribution System Reliability written by Mohammad Almuhaini and published by . This book was released on 2012 with total page 146 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second part assesses the impact of the conventional and renewable distributed generation (DG) on the reliability of the future distribution system. This takes into account the variability of the power output of the renewable DG, such as wind and solar DGs, and the chronological nature of the load demand. The stochastic nature of the renewable resources and its influence on the reliability of the system are modeled and studied by computing the adequacy transition rate. Then, an integrated Markov model that incorporates the DG adequacy transition rate, DG mechanical failure, and starting and switching probability is proposed and utilized to give accurate results for the DG reliability impact. The main focus in this research is the conventional, solar, and wind DG units. However, the technique used appears to be applicable to any renewable energy source.
Download or read book Power Distribution System Reliability written by Ali Chowdhury and published by John Wiley & Sons. This book was released on 2011-04-22 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical, hands-on approach to power distribution system reliability As power distribution systems age, the frequency and duration of consumer interruptions will increase significantly. Now more than ever, it is crucial for students and professionals in the electrical power industries to have a solid understanding of designing the reliable and cost-effective utility, industrial, and commercial power distribution systems needed to maintain life activities (e.g., computers, lighting, heating, cooling, etc.). This books fills the void in the literature by providing readers with everything they need to know to make the best design decisions for new and existing power distribution systems, as well as to make quantitative "cost vs. reliability" trade-off studies. Topical coverage includes: Engineering economics Reliability analysis of complex network configurations Designing reliability into industrial and commercial power systems Application of zone branch reliability methodology Equipment outage statistics Deterministic planning criteria Customer interruption for cost models for load-point reliability assessment Isolation and restoration procedures And much more Each chapter begins with an introduction and ends with a conclusion and a list of references for further reading. Additionally, the book contains actual utility and industrial power system design problems worked out with real examples, as well as additional problem sets and their solutions. Power Distribution System Reliability is essential reading for practicing engineers, researchers, technicians, and advanced undergraduate and graduate students in electrical power industries.
Download or read book Reliability Analysis of Modern Power Systems written by R. K. Saket and published by John Wiley & Sons. This book was released on 2024-09-04 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: A reader-friendly introduction to reliability analysis and its power systems applications The subset of probability theory known as reliability theory analyzes the likelihood of failure in a given component or system under given conditions. It is a critical aspect of engineering as it concerns systems of all kinds, not least modern power systems, with their essential role in sustaining the technologies on which modern life relies. Reliability Analysis of Modern Power Systems is a thorough, accessible book introducing the core concepts of reliability theory as they apply to power systems engineering, as well as the advanced technologies currently driving new frontiers in reliability analysis. It is a must-own for anyone looking to understand and improve the systems that power our world. Readers will also find: Detailed discussion of reliability modeling and simulation of composite systems using Typhoon HIL 404 Reliability assessment of generation systems, transmission systems, distribution systems, and more Information on renewable energy integration for more sustainable power grids Reliability Analysis of Modern Power Systems is ideal for professionals, engineers, and researchers in power system design and reliability engineering, as well as for advanced undergraduate and graduate students in these and related subjects.
Download or read book The Power of Change written by National Academies of Sciences, Engineering, and Medicine and published by National Academies Press. This book was released on 2016-08-30 with total page 341 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electricity, supplied reliably and affordably, is foundational to the U.S. economy and is utterly indispensable to modern society. However, emissions resulting from many forms of electricity generation create environmental risks that could have significant negative economic, security, and human health consequences. Large-scale installation of cleaner power generation has been generally hampered because greener technologies are more expensive than the technologies that currently produce most of our power. Rather than trade affordability and reliability for low emissions, is there a way to balance all three? The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies considers how to speed up innovations that would dramatically improve the performance and lower the cost of currently available technologies while also developing new advanced cleaner energy technologies. According to this report, there is an opportunity for the United States to continue to lead in the pursuit of increasingly clean, more efficient electricity through innovation in advanced technologies. The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies makes the case that America's advantagesâ€"world-class universities and national laboratories, a vibrant private sector, and innovative states, cities, and regions that are free to experiment with a variety of public policy approachesâ€"position the United States to create and lead a new clean energy revolution. This study focuses on five paths to accelerate the market adoption of increasing clean energy and efficiency technologies: (1) expanding the portfolio of cleaner energy technology options; (2) leveraging the advantages of energy efficiency; (3) facilitating the development of increasing clean technologies, including renewables, nuclear, and cleaner fossil; (4) improving the existing technologies, systems, and infrastructure; and (5) leveling the playing field for cleaner energy technologies. The Power of Change: Innovation for Development and Deployment of Increasingly Clean Energy Technologies is a call for leadership to transform the United States energy sector in order to both mitigate the risks of greenhouse gas and other pollutants and to spur future economic growth. This study's focus on science, technology, and economic policy makes it a valuable resource to guide support that produces innovation to meet energy challenges now and for the future.
Download or read book Probabilistic Reliability Analysis of Power Systems written by Bart W. Tuinema and published by Springer Nature. This book was released on 2020-04-22 with total page 337 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook provides an introduction to probabilistic reliability analysis of power systems. It discusses a range of probabilistic methods used in reliability modelling of power system components, small systems and large systems. It also presents the benefits of probabilistic methods for modelling renewable energy sources. The textbook describes real-life studies, discussing practical examples and providing interesting problems, teaching students the methods in a thorough and hands-on way. The textbook has chapters dedicated to reliability models for components (reliability functions, component life cycle, two-state Markov model, stress-strength model), small systems (reliability networks, Markov models, fault/event tree analysis) and large systems (generation adequacy, state enumeration, Monte-Carlo simulation). Moreover, it contains chapters about probabilistic optimal power flow, the reliability of underground cables and cyber-physical power systems. After reading this book, engineering students will be able to apply various methods to model the reliability of power system components, smaller and larger systems. The textbook will be accessible to power engineering students, as well as students from mathematics, computer science, physics, mechanical engineering, policy & management, and will allow them to apply reliability analysis methods to their own areas of expertise.
