Download or read book Initiation of Failure in Slopes in Overconsolidated Clays and Clay Shales written by Ioannis V. Constantopoulos and published by . This book was released on 1971 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Weathering as a Predisposing Factor to Slope Movements written by Domenico Calcaterra and published by Geological Society of London. This book was released on 2010 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is intended to provide an up-to-date overview of the approaches, methodologies and techniques devoted to better understand-ing of the weathering conditions of rock masses on slopes. According to the local conditions, a variety of slope movements may take place and involve weathered rock masses. Shallow and rapid soil slips evolving to debris flows are probably the most common type of slope movement. At the same time, deep-seated, intermittent landslides can also affect large volumes of weathered rocks and soils. Despite the high frequency of landslides in weathered materials, and the damage and casualties they repeatedly cause, little is known about the relationship between weathering and slope move-ments. This book presents worldwide case studies, where a variety of geo-logical and geomorphological settings are discussed. The content is divided into three sections: the first is devoted to broad aspects of the weathering/landslide processes; the second and third sections include papers dealing with igneous/metamorphic and sedimentary weathered rocks, respec-tively.
Download or read book Publication written by Oslo. Norges geotekniske institutt and published by . This book was released on 1970 with total page 682 pages. Available in PDF, EPUB and Kindle. Book excerpt: Includes the institute's report, 1953-
Download or read book Geologic Hazards written by Roy E. Hunt and published by CRC Press. This book was released on 2007-03-05 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geologic hazards pose the greatest threat to human safety for any geotechnical undertaking, but it is ultimately the engineer's ability to recognize and cope with these hazards that will determine the safety of life and property. Armed with Geologic Hazards: A Field Guide for Geotechnical Engineers you will be able to properly recognize, understand
Download or read book U S Geological Survey Bulletin written by and published by . This book was released on 1983 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Geological Survey Bulletin written by and published by . This book was released on 1984 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Mineral Resources of the Mount Zirkel Wilderness and Northern Park Range Vicinity Jackson and Routt Counties Colorado written by Edward Joseph Young and published by . This book was released on 1985 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Nuclear Science Abstracts written by and published by . This book was released on 1972 with total page 1684 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Annotated Bibliography of Explosive Excavation Related Research written by Waterways Experiment Station (U.S.) and published by . This book was released on 1972 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: [Describes all reports prepared from fiscal years 1962-72.]
Download or read book Principles of Engineering Geology written by P.B. Attewell and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 1075 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'Engineering geology' is one of those terms that invite definition. The American Geological Institute, for example, has expanded the term to mean 'the application of the geological sciences to engineering practice for the purpose of assuring that the geological factors affecting the location, design, construction, operation and mainten ance of engineering works are recognized and adequately provided for'. It has also been defined by W. R. Judd in the McGraw-Hill Encyclopaedia of Science and Technology as 'the application of education and experience in geology and other geosciences to solve geological problems posed by civil engineering structures'. Judd goes on to specify those branches of the geological or geo-sciences as surface (or surficial) geology, structural/fabric geology, geohydro logy, geophysics, soil and rock mechanics. Soil mechanics is firmly included as a geological science in spite of the perhaps rather unfortunate trends over the years (now happily being reversed) towards purely mechanistic analyses which may well provide acceptable solutions for only the simplest geology. Many subjects evolve through their subject areas from an interdisciplinary background and it is just such instances that pose the greatest difficulties of definition. Since the form of educational development experienced by the practitioners of the subject ulti mately bears quite strongly upon the corporate concept of the term 'engineering geology', it is useful briefly to consider that educational background.
Download or read book Foundation Engineering Handbook written by Hsai-Yang Fang and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 935 pages. Available in PDF, EPUB and Kindle. Book excerpt: More than ten years have passed since the first edition was published. During that period there have been a substantial number of changes in geotechnical engineering, especially in the applications of foundation engineering. As the world population increases, more land is needed and many soil deposits previously deemed unsuitable for residential housing or other construction projects are now being used. Such areas include problematic soil regions, mining subsidence areas, and sanitary landfills. To overcome the problems associated with these natural or man-made soil deposits, new and improved methods of analysis, design, and implementation are needed in foundation construction. As society develops and living standards rise, tall buildings, transportation facilities, and industrial complexes are increasingly being built. Because of the heavy design loads and the complicated environments, the traditional design concepts, construction materials, methods, and equipment also need improvement. Further, recent energy and material shortages have caused additional burdens on the engineering profession and brought about the need to seek alternative or cost-saving methods for foundation design and construction.
Download or read book Geological Hazards written by Fred G. Bell and published by CRC Press. This book was released on 2003-02-27 with total page 664 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural hazards cost the global economy over $50,000 million per year. Two thirds of this is spent on damage repair, the remainder represents the cost of predicting, preventing and mitigating against disasters. Man-made hazards such as groundwater pollution, subsidence and soil erosion add to this figure. Geological Hazards is the first book to consider both natural and man-made disasters in a single volume. All major geological hazards are examined. It presents a state-of-the art survey for students on civil engineering and physical geography courses, as well as researchers and practicing civil engineers. It examines methods of assessing, evaluating and combatting hazards, both natural and man-made. Richly illustrated, it views the subject from an international perspective.
Download or read book Proceedings of the Annual Engineering Geology and Soils Engineering Symposium written by and published by . This book was released on 1974 with total page 394 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Landslides written by Donald Robert Coates and published by Geological Society of America. This book was released on 1977-01-01 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Soil Strength and Slope Stability written by J. Michael Duncan and published by John Wiley & Sons. This book was released on 2014-08-13 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The definitive guide to the critical issue of slope stability and safety Soil Strength and Slope Stability, Second Edition presents the latest thinking and techniques in the assessment of natural and man-made slopes, and the factors that cause them to survive or crumble. Using clear, concise language and practical examples, the book explains the practical aspects of geotechnical engineering as applied to slopes and embankments. The new second edition includes a thorough discussion on the use of analysis software, providing the background to understand what the software is doing, along with several methods of manual analysis that allow readers to verify software results. The book also includes a new case study about Hurricane Katrina failures at 17th Street and London Avenue Canal, plus additional case studies that frame the principles and techniques described. Slope stability is a critical element of geotechnical engineering, involved in virtually every civil engineering project, especially highway development. Soil Strength and Slope Stability fills the gap in industry literature by providing practical information on the subject without including extraneous theory that may distract from the application. This balanced approach provides clear guidance for professionals in the field, while remaining comprehensive enough for use as a graduate-level text. Topics include: Mechanics of soil and limit equilibrium procedures Analyzing slope stability, rapid drawdown, and partial consolidation Safety, reliability, and stability analyses Reinforced slopes, stabilization, and repair The book also describes examples and causes of slope failure and stability conditions for analysis, and includes an appendix of slope stability charts. Given how vital slope stability is to public safety, a comprehensive resource for analysis and practical action is a valuable tool. Soil Strength and Slope Stability is the definitive guide to the subject, proving useful both in the classroom and in the field.
Download or read book Slope Analysis written by R Chowdury and published by Elsevier. This book was released on 2012-12-02 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: Slope Analysis summarizes the fundamental principles of slope analysis. It explores not only the similarities but also the differences in rock slopes and soil slopes, and it presents alternative methods of analysis, new concepts, and new approaches to analysis. The book introduces both natural and man-made slopes, the nature of soils and rocks, geomorphology, geology, and the aims of slope analysis. These topics are followed by chapters about stress and strain, shear strength of rock and soils, and progressive failure of slopes. This book also presents limit equilibrium methods I and II, which are the planar failure surfaces and slip surfaces of arbitrary shape, respectively. It also includes stress analysis and slope stability, natural slope analysis, and a brief review on plasticity and shear band analysis. Before presenting its conclusions, the book discusses special aspects of slope analysis, such as earthquake analysis, pseudo-static analysis, dynamic analysis, and anisotropy, in addition to Newmark's approach.
Download or read book Soil Mechanics written by T. William Lambe and published by John Wiley & Sons. This book was released on 1991-01-15 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic, comprehensive guide to the physics of soil The physical behavior of soil under different environmental conditions impacts public safety on every roadway and in every structure; a deep understanding of soil mechanics is therefore an essential component to any engineering education. Soil Mechanics offers in-depth information on the behavior of soil under wet, dry, or transiently wet conditions, with detailed explanations of stress, strain, shear, loading, permeability, flow, improvement, and more. Comprehensive in scope, this book provides accessible coverage of a critical topic, providing the background aspiring engineers will need throughout their careers.
