Download or read book Medical Infrared Imaging written by Mary Diakides and published by CRC Press. This book was released on 2012-12-12 with total page 641 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of technological advances in infrared sensor technology, image processing, "smart" algorithms, knowledge-based databases, and their overall system integration has resulted in new methods of research and use in medical infrared imaging. The development of infrared cameras with focal plane arrays no longer requiring cooling, added a new dimension to this modality. Medical Infrared Imaging: Principles and Practices covers new ideas, concepts, and technologies along with historical background and clinical applications. The book begins by exploring worldwide advances in the medical applications of thermal imaging systems. It covers technology and hardware including detectors, detector materials, un-cooled focal plane arrays, high performance systems, camera characterization, electronics for on-chip image processing, optics, and cost-reduction designs. It then discusses the physiological basis of the thermal signature and its interpretation in a medical setting. The book also covers novel and emerging techniques, the complexities and importance of protocols for effective and reproducible results, storage and retrieval of thermal images, and ethical obligations. Of interest to both the medical and biomedical engineering communities, the book explores many opportunities for developing and conducting multidisciplinary research in many areas of medical infrared imaging. These range from clinical quantification to intelligent image processing for enhancement of the interpretation of images, and for further development of user-friendly high-resolution thermal cameras. These would enable the wide use of infrared imaging as a viable, noninvasive, low-cost, first-line detection modality.
Download or read book Infrared Thermography Handbooks Principles and practice written by and published by . This book was released on 2004-01-01 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Infrared Thermal Imaging written by Michael Vollmer and published by John Wiley & Sons. This book was released on 2018-02-20 with total page 803 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new up-to-date edition of the successful handbook and ready reference retains the proven concept of the first, covering basic and advanced methods and applications in infrared imaging from two leading expert authors in the field. All chapters have been completely revised and expanded and a new chapter has been added to reflect recent developments in the field and report on the progress made within the last decade. In addition there is now an even stronger focus on real-life examples, with 20% more case studies taken from science and industry. For ease of comprehension the text is backed by more than 590 images which include graphic visualizations and more than 300 infrared thermography figures. The latter include many new ones depicting, for example, spectacular views of phenomena in nature, sports, and daily life.
Download or read book Infrared Thermography written by Raghu Prakash and published by BoD – Books on Demand. This book was released on 2012-03-14 with total page 250 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared Thermography (IRT) is commonly as a NDE tool to identify damages and provide remedial action. The fields of application are vast, such as, materials science, life sciences and applied engineering. This book offers a collection of ten chapters with three major sections - relating to application of infrared thermography to study problems in materials science, agriculture, veterinary and sports fields as well as in engineering applications. Both mathematical modeling and experimental aspects of IRT are evenly discussed in this book. It is our sincere hope that the book meets the requirements of researchers in the domain and inspires more researchers to study IRT.
Download or read book The Thermal Human Body written by Kurt Ammer and published by Jenny Stanford Publishing. This book was released on 2019-05-09 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a guide for the constantly growing community of the users of medical thermal imaging. It describes where and how an infrared equipment can be used in a strictly standardised way and how one can ultimately comprehensively report the findings. Due to their insight into the complex mechanisms behind the distribution of surface temperature, future users of medical thermal imaging should be able to provide careful, and cautious, interpretations of infrared thermograms, thus avoiding the pitfalls of the past. The authors are well-known pioneers of the technique of infrared imaging in medicine who have combined strict standard-based evaluation of medical thermal images with their expertise in clinical medicine and related fields of health management.
Download or read book Principles of Infrared Technology written by John Lester Miller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 585 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is about general infrared (IR) engineering, technology, practices, and principles as they apply to modem imaging systems. An alternative title to this book with appeal to managers and marketing personnel might be "Everything You Always Wanted to Know about Infrared Sensors, but Couldn't Get Answers on from Engineers." This book is not meant to be a comprehensive compendium of IR (like the Infrared and Electro Optical Systems Handbook). Rather, it is intend ed to complement such texts by providing up to date information and pragmatic knowledge that is difficult to locate outside of periodicals. The information contained in this book is critical in the day-to-day life of en gineering practitioners, proposal writers, and those on the periphery of an IR pro gram. It serves as a guide for engineers wishing to "catch up," engineers new to the field, managers, students, administrators, and technicians. It is also useful for seasoned IR engineers who want to review recent technological developments.
Download or read book Thermal Infrared Sensors written by Helmut Budzier and published by John Wiley & Sons. This book was released on 2011-03-29 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems involved in designing optimal infrared (IR) measuring systems under given conditions are commensurately complex. The optical set-up and radiation conditions, the interaction between sensor and irradiation and the sensor itself, determine the operation of the sensor system. Simple calculations for solving these problems without any understanding of the causal relationships are not possible. Thermal Infrared Sensors offers a concise explanation of the basic physical and photometric fundamentals needed for the consideration of these interactions. It depicts the basics of thermal IR sensor systems and explains the manifold causal relationships between the most important effects and influences, describing the relationships between sensor parameters such as thermal and special resolution, and application conditions. This book covers: various types of thermal sensors, like thermoelectric sensor, pyroelectric sensors, microbolometers, micro-Golay cells and bimorphous sensors; basic applications for thermal sensors; noise - a limiting factor for thermal resolution and detectivity - including an outline of the mathematics and noise sources in thermal infrared sensors; the properties of IR sensor systems in conjunction with the measurement environment and application conditions; 60 examples showing calculations of real problems with real numbers, as they occur in many practical applications. This is an essential reference for practicing design and optical engineers and users of infrared sensors and infrared cameras. With this book they will be able to transform the demonstrated solutions to their own problems, find ways to match their commercial IR sensors and cameras to their measurement conditions, and to tailor and optimise sensors and set-ups to particular IR measurement problems. The basic knowledge outlined in this book will give advanced undergraduate and graduate students a thorough grounding in this technology.
Download or read book Theory and Practice of Infrared Technology for Nondestructive Testing written by Xavier Maldague and published by Wiley-Interscience. This book was released on 2001-04-30 with total page 716 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book includes fundamental concepts of theory, instrumentation, and experimental practice as well as practical applications. An important chapter setting the book apart from other publications describes the properties of materials and presents case studies from industry. In addition, a program called IRNDT accompanies the book and is available on the Wiley ftp site. The program includes an image bank that can be used to test the principles covered in the book. * All chapters end with summaries, problems, and questions. * Authored by an acknowledged expert in the field. * Material draws on case studies to illustrate major points.
Download or read book Infrared Thermography written by G. Gaussorgues and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 553 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared Thermography gives a thorough introduction to the principles, techniques, and applications of infrared imaging systems. With its comprehensive coverage and applications orientation, this book provides an ideal tutorial introduction to engineers and scientists interested in applying infrared thermography.
Download or read book Infrared Thermography Recent Advances and Future Trends written by Carosena Meola and published by Bentham Science Publishers. This book was released on 2012-08-03 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Infrared thermography (IRT) is a non-contact, non-invasive methodology which allows for detection of thermal energy that is radiated from objects in the infrared band of the electromagnetic spectrum, for conversion of such energy into a visible image (such as a surface temperature map). This feature represents a great potential to be exploited in a vast variety of fields from aerospace to civil engineering, to medicine, to agriculture, etc. However, IRT is still not adequately enclosed in industrial instrumentation and there are still potential users who might benefit from the use of such a technique and who are not aware of their existence. This e-book conveys information about basic IRT theory, infrared detectors, signal digitalization and applications of infrared thermography in many fields such as medicine, foodstuff conservation, fluid-dynamics, architecture, anthropology, condition monitoring, non destructive testing and evaluation of materials and structures. The volume promotes an exchange of information between the academic world and industry, and shares methodologies which were independently developed and applied in specific disciplines.
Download or read book Mine Planning and Equipment Selection written by Carsten Drebenstedt and published by Springer Science & Business Media. This book was released on 2013-10-16 with total page 1464 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume includes all papers presented at the 22nd International Conference on Mine Planning and Equipment Selection (MPES), Dresden, Germany, 2013. Mineral Resources are needed for almost all processes of modern life, whilst the mining industry is facing strict requirements regarding efficiency and sustainability. The research papers in this volume deal with the latest developments and research results in the fields of mining, machinery, automatization and environment protection.
Download or read book Medical Infrared Imaging written by Mary Diakides and published by CRC Press. This book was released on 2012-12-12 with total page 621 pages. Available in PDF, EPUB and Kindle. Book excerpt: The evolution of technological advances in infrared sensor technology, image processing, "smart" algorithms, knowledge-based databases, and their overall system integration has resulted in new methods of research and use in medical infrared imaging. The development of infrared cameras with focal plane arrays no longer requiring cooling, added a new
Download or read book How to Investigate Damp written by Ralph Burkinshaw and published by Routledge. This book was released on 2020-12-29 with total page 729 pages. Available in PDF, EPUB and Kindle. Book excerpt: The aim of this book is to take the reader by the hand and show them exactly how to carry out various inspection techniques to identify the causes of damp in buildings. This is achieved by taking them through a variety of investigation methods using real-life case studies illustrated by dozens of sketches, drawings and photographs – and considerable insight into how investigations can be conducted on site – and also including most importantly the Client’s input and perspective on a damp issue. Written in non-technical language by a leading expert and author on damp, the book begins by outlining the common types and phases of an investigation, the equipment required and the nature of potential remedial work. Case studies then cover condensation, penetrating damp, plumbing and roof leaks, below ground moisture and damp bridging – and some innovative remedies installed by the author himself. The final section contains step by step guidance on procedures such as using a humidity box, inspecting a cavity wall, using a damp meter and extracting and testing a plaster sample for salt content. The book is full of hints and tips developed over a career spent investigating, diagnosing and remediating damp issues and is essential reading for surveyors looking to improve their skills and knowledge of this often complex defect. The book will also be very useful for homeowners trying to self-diagnose, and architects, engineers and other professionals who need to gain insight into common problem caused by moisture imbalance in buildings.
Download or read book Breast Health Handbook and Medical Thermography written by Francine van Broekhoven and published by Balboa Press. This book was released on 2021-06-11 with total page 214 pages. Available in PDF, EPUB and Kindle. Book excerpt: So many woman have no idea what they can do to keep their breast healthy, and panic attacks them when they feel pain or something they don’t recognize. This book can help with your breast health questions. 90% of breast complaints are related to lifestyle and by making the right choices you can take back control and understand what your lovely breasts really need. A part of those choices is breast examination. What is medical thermography and how can you benefit from this. This book is all about putting awareness and knowledge back into the hands of women. Maybe you want to read this book for more information, that’s a great goal, but with this book you will get a deeper knowledge about your body and the function of your breasts in your health as a whole
Download or read book Infrared Thermography Handbooks Applications written by A. N. Nowicki and published by . This book was released on 2004-01-01 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Infrared Handbook written by Environmental Research Institute of Michigan. Infrared Information and Analysis Center and published by . This book was released on 1978 with total page 1740 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Physics in Medical Diagnosis written by T.A. Delchar and published by Springer Science & Business Media. This book was released on 1997-05-31 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Physics has been applied to medical diagnosis for very nearly 400 years, and has now become an essential element of medical practice. This book concentrates on the theoretical basis of the physics which supports diagnostic techniques in modern clinical practice. Arising out of over a decade of teaching a course on medical physics to third year undergraduate students, the book has been structured so that individuals with a non-physics background, such as medical students or practitioners, can also benefit.
