Download or read book Information Technology for Manufacturing written by Kevin Ake and published by CRC Press. This book was released on 2003-11-24 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rate of change in manufacturing today is faster than ever. Retailers and consumers demand flexibility and responsiveness, regulatory oversight is on the rise, and increasing consolidations require companies to demonstrate cost and efficiency improvements. Information Technology for Manufacturing describes how IT can help manufacturers e

Download or read book Information Technology for Manufacturing written by National Research Council and published by National Academies Press. This book was released on 1995-02-27 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.

Download or read book Information Technology for Manufacturing written by Committee to Study Information Technology and Manufacturing and published by National Academies Press. This book was released on 1995-03-13 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a vision of manufacturing in the twenty-first century that maximizes efficiencies and improvements by exploiting the full power of information and provides a research agenda for information technology and manufacturing that is necessary for success in achieving such a vision. Research on information technology to support product and process design, shop-floor operations, and flexible manufacturing is described. Roles for virtual manufacturing and the information infrastructure are also addressed. A final chapter is devoted to nontechnical research issues.

Download or read book Manufacturing Technology written by Helmi A. Youssef and published by CRC Press. This book was released on 2023-08-17 with total page 972 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition textbook provides comprehensive knowledge and insight into various aspects of manufacturing technology, processes, materials, tooling, and equipment. Its main objective is to introduce the grand spectrum of manufacturing technology to individuals who will be involved in the design and manufacturing of finished products and to provide them with basic information on manufacturing technologies. Manufacturing Technology: Materials, Processes, and Equipment, Second Edition, is written in a descriptive manner, where the emphasis is on the fundamentals of the process, its capabilities, typical applications, advantages, and limitations. Mathematical modeling and equations are used only when they enhance the basic understanding of the material dealt with. The book is a fundamental textbook that covers all the manufacturing processes, materials, and equipment used to convert the raw materials to a final product. It presents the materials used in manufacturing processes and covers the heat treatment processes, smelting of metals, and other technological processes such as casting, forming, powder metallurgy, joining processes, and surface technology. Manufacturing processes for polymers, ceramics, and composites are also covered. The book also covers surface technology, fundamentals of traditional and nontraditional machining processes, numerical control of machine tools, industrial robots and hexapods, additive manufacturing, and industry 4.0 technologies. The book is written specifically for undergraduates in industrial, manufacturing, mechanical, and materials engineering disciplines of the second to fourth levels to cover complete courses of manufacturing technology taught in engineering colleges and institutions all over the world. It also covers the needs of production and manufacturing engineers and technologists participating in related industries where it is expected to be part of their professional library. Additionally, the book can be used by students in other disciplines concerned with design and manufacturing, such as automotive and aerospace engineering.

Download or read book Manufacturing Systems Theory and Practice written by George Chryssolouris and published by Springer Science & Business Media. This book was released on 2006-02-28 with total page 623 pages. Available in PDF, EPUB and Kindle. Book excerpt: Overviews manufacturing systems from the ground up, following the same concept as in the first edition. Delves into the fundamental building blocks of manufacturing systems: manufacturing processes and equipment. Discusses all topics from the viewpoint of four fundamental manufacturing attributes: cost, rate, flexibility and quality.

Download or read book The Industrial Information Technology Handbook written by Richard Zurawski and published by CRC Press. This book was released on 2018-10-03 with total page 1938 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Industrial Information Technology Handbook focuses on existing and emerging industrial applications of IT, and on evolving trends that are driven by the needs of companies and by industry-led consortia and organizations. Emphasizing fast growing areas that have major impacts on industrial automation and enterprise integration, the Handbook covers topics such as industrial communication technology, sensors, and embedded systems. The book is organized into two parts. Part 1 presents material covering new and quickly evolving aspects of IT. Part 2 introduces cutting-edge areas of industrial IT. The Handbook presents material in the form of tutorials, surveys, and technology overviews, combining fundamentals and advanced issues, with articles grouped into sections for a cohesive and comprehensive presentation. The text contains 112 contributed reports by industry experts from government, companies at the forefront of development, and some of the most renowned academic and research institutions worldwide. Several of the reports on recent developments, actual deployments, and trends cover subject matter presented to the public for the first time.

Download or read book Optimization of Manufacturing Systems Using the Internet of Things written by Yingfeng Zhang and published by Academic Press. This book was released on 2016-10-21 with total page 228 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization of Manufacturing Systems Using the Internet of Things extends the IoT (Internet of Things) into the manufacturing field to develop an IoMT (Internet of Manufacturing Things) architecture with real-time traceability, visibility, and interoperability in production planning, execution, and control. This book is essential reading for anyone interested in the optimization and control of an intelligent manufacturing system. As modern manufacturing shop-floors can create bottlenecks in the capturing and collection of real-time field information, and because paper-based manual systems are time-consuming and prone to errors, this book helps readers understand how to alleviate these issues, assisting them in their decision-making on shop-floors. Includes case studies in implementing IoTs for data acquisition, monitoring, and assembly in manufacturing. Helps manufacturers to tackle the growing complexities and uncertainties of manufacturing systems in globalized business environments Acts as an introduction to using IoT for readers across industrial and manufacturing engineering

Download or read book Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology written by Dimitris Mourtzis and published by Elsevier. This book was released on 2021-11-10 with total page 410 pages. Available in PDF, EPUB and Kindle. Book excerpt: Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology draws on the latest industry advances to provide everything needed for the effective implementation of this powerful tool. Shorter product lifecycles have increased pressure on manufacturers through the increasing variety and complexity of production, challenging their workforce to remain competitive and profitable. This has led to innovation in production network methodologies, which together with opportunities provided by new digital technologies has fed a rapid evolution of production engineering that has opened new solutions to the challenges of mass personalization and market uncertainty. In addition to the latest developments in cloud technology, reference is made to key enabling technologies, including artificial intelligence, the digital twin, big data analytics, and the internet of things (IoT) to help users integrate the cloud approach with a fully digitalized production system. Presents diverse cases that show how cloud-based technologies can be used in different ways as part of the standard operation of global production networks Provides detailed reviews of new technologies like the digital twin, big data analytics, and blockchain to provide context on the role of cloud technologies in a fully digitalized system Explores future trends for cloud technology and production engineering

Download or read book Information Technology for Balanced Manufacturing Systems written by Weiming Shen and published by Springer. This book was released on 2007-03-07 with total page 509 pages. Available in PDF, EPUB and Kindle. Book excerpt: BASYS conferences were initially organized to promote the development of balanced automation systems. The first BASYS conference was successfully launched in Victoria, Brazil, in 1995. BASYS'06 is the 7th edition in this series. This book comprises three invited keynote papers and forty-nine regular papers accepted for presentation at the conference. All together, these papers will make significant contributions to the literature of Intelligent Technology for Balanced Manufacturing Systems.

Download or read book Digital Twin Driven Smart Manufacturing written by Fei Tao and published by Academic Press. This book was released on 2019-02-07 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital Twin Driven Smart Manufacturing examines the background, latest research, and application models for digital twin technology, and shows how it can be central to a smart manufacturing process.The interest in digital twin in manufacturing is driven by a need for excellent product reliability, and an overall trend towards intelligent, and connected manufacturing systems. This book provides an ideal entry point to this subject for readers in industry and academia, as it answers the questions: (a) What is a digital twin? (b) How to construct a digital twin? (c) How to use a digital twin to improve manufacturing efficiency? (d) What are the essential activities in the implementation of a digital twin? (e) What are the most important obstacles to overcome for the successful deployment of a digital twin? (f) What are the relations between digital twin and New Technologies? (g) How to combine digital twin with the New Technologies to achieve high efficiency and smartness in manufacturing?This book focuses on these problems as it aims to help readers make the best use of digital twin technology towards smart manufacturing. - Analyzes the differences, synergies and possibilities for integration between digital twin technology and other technologies, such as big data, service and Internet of Things - Discuss new requirements for a traditional three-dimension digital twin and proposes a methodology for a five-dimension version - Investigates new models for optimized manufacturing, prognostics and health management, and cyber-physical fusion based on the digital twin

Download or read book The New Industrial Engineering Information Technology and Business Process Redesign written by Thomas H. Davenport and published by Legare Street Press. This book was released on 2022-10-26 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This work has been selected by scholars as being culturally important, and is part of the knowledge base of civilization as we know it. This work is in the "public domain in the United States of America, and possibly other nations. Within the United States, you may freely copy and distribute this work, as no entity (individual or corporate) has a copyright on the body of the work. Scholars believe, and we concur, that this work is important enough to be preserved, reproduced, and made generally available to the public. We appreciate your support of the preservation process, and thank you for being an important part of keeping this knowledge alive and relevant.

Download or read book Utilizing Blockchain Technologies in Manufacturing and Logistics Management written by S B Goyal and published by Business Science Reference. This book was released on 2022-01-21 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Blockchain technology has the potential to utterly transform supply chains, streamline processes, and improve the whole of security. Manufacturers across the globe face challenges with forecasting demand, controlling inventory, and accelerating digital transformation to cater to the challenges of changing market dynamics and evolving customer expectations. Hence, blockchain should be seen as an investment in future-readiness and customer-centricity, not as an experimental technology. Utilizing Blockchain Technologies in Manufacturing and Logistics Management explores the strengths of blockchain adaptation in manufacturing industries and logistics management, which include product traceability, supply chain transparency, compliance monitoring, and auditability, and also examines the current open issues and future research trends of blockchain. Leveraging blockchain technology into a manufacturing enterprise can enhance its security and reduce the rates of systematic failures. Covering topics such as fraud detection, Industry 4.0, and security threats, this book is a ready premier reference for graduate and post-graduate students, academicians, researchers, industrialists, consultants, and entrepreneurs, as well as micro, small, and medium enterprises.

Download or read book Information Technology for Manufacturing Systems written by Qi Luo and published by Trans Tech Publications Ltd. This book was released on 2010-01-12 with total page 1556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The objective of this special collection was to provide a outlet for researchers, educators, engineers and government officials, involved in the general areas of Intelligent Manufacturing, Manufacturing Systems and Processes, Modeling and Simulation, to disseminate their latest research results and exchange views on the future research directions of these fields.

Download or read book Information Technology for Manufacturing Systems II written by Qi Luo and published by Trans Tech Publications Ltd. This book was released on 2011-06-10 with total page 2800 pages. Available in PDF, EPUB and Kindle. Book excerpt: The 2011 International Conference on Information Technology for Manufacturing Systems (ITMS 2011) was co-sponsored by the University of Adelaide, Australia and Huazhong University of Science and Technology, China. Its mission was to bring together innovative academics and industrial experts in the field of Materials Science and Mechanical Science. Volume is indexed by Thomson Reuters CPCI-S (WoS). The proceedings consist of over 467 peer-reviewed papers which offer an uniquely up-to-date survey of the topic.

Download or read book Information Technology in Manufacturing Processes written by Graham Winch and published by . This book was released on 1983 with total page 162 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Practical E Manufacturing and Supply Chain Management written by Gerhard Greeff and published by Elsevier. This book was released on 2004-08-11 with total page 476 pages. Available in PDF, EPUB and Kindle. Book excerpt: New technologies are revolutionising the way manufacturing and supply chain management are implemented. These changes are delivering manufacturing firms the competitive advantage of a highly flexible and responsive supply chain and manufacturing system to ensure that they meet the high expectations of their customers, who, in today's economy, demand absolutely the best service, price, delivery time and product quality.To make e-manufacturing and supply chain technologies effective, integration is needed between various, often disparate systems. To understand why this is such an issue, one needs to understand what the different systems or system components do, their objectives, their specific focus areas and how they interact with other systems. It is also required to understand how these systems evolved to their current state, as the concepts used during the early development of systems and technology tend to remain in place throughout the life-cycle of the systems/technology. This book explores various standards, concepts and techniques used over the years to model systems and hierarchies in order to understand where they fit into the organization and supply chain. It looks at the specific system components and the ways in which they can be designed and graphically depicted for easy understanding by both information technology (IT) and non-IT personnel.Without a good implementation philosophy, very few systems add any real benefit to an organization, and for this reason the ways in which systems are implemented and installation projects managed are also explored and recommendations are made as to possible methods that have proven successful in the past. The human factor and how that impacts on system success are also addressed, as is the motivation for system investment and subsequent benefit measurement processes.Finally, the vendor/user supply/demand within the e-manufacturing domain is explored and a method is put forward that enables the reduction of vendor bias during the vendor selection process.The objective of this book is to provide the reader with a good understanding regarding the four critical factors (business/physical processes, systems supporting the processes, company personnel and company/personal performance measures) that influence the success of any e-manufacturing implementation, and the synchronization required between these factors.· Discover how to implement the flexible and responsive supply chain and manufacturing execution systems required for competitive and customer-focused manufacturing· Build a working knowledge of the latest plant automation, manufacturing execution systems (MES) and supply chain management (SCM) design techniques· Gain a fuller understanding of the four critical factors (business and physical processes, systems supporting the processes, company personnel, performance measurement) that influence the success of any e-manufacturing implementation, and how to evaluate and optimize all four factors

Download or read book Advanced Manufacturing written by William B. Bonvillian and published by MIT Press. This book was released on 2018-01-12 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: How to rethink innovation and revitalize America's declining manufacturing sector by encouraging advanced manufacturing, bringing innovative technologies into the production process. The United States lost almost one-third of its manufacturing jobs between 2000 and 2010. As higher-paying manufacturing jobs are replaced by lower-paying service jobs, income inequality has been approaching third world levels. In particular, between 1990 and 2013, the median income of men without high school diplomas fell by an astonishing 20% between 1990 and 2013, and that of men with high school diplomas or some college fell by a painful 13%. Innovation has been left largely to software and IT startups, and increasingly U.S. firms operate on a system of “innovate here/produce there,” leaving the manufacturing sector behind. In this book, William Bonvillian and Peter Singer explore how to rethink innovation and revitalize America's declining manufacturing sector. They argue that advanced manufacturing, which employs such innovative technologies as 3-D printing, advanced material, photonics, and robotics in the production process, is the key. Bonvillian and Singer discuss transformative new production paradigms that could drive up efficiency and drive down costs, describe the new processes and business models that must accompany them, and explore alternative funding methods for startups that must manufacture. They examine the varied attitudes of mainstream economics toward manufacturing, the post-Great Recession policy focus on advanced manufacturing, and lessons from the new advanced manufacturing institutes. They consider the problem of “startup scaleup,” possible new models for training workers, and the role of manufacturing in addressing “secular stagnation” in innovation, growth, the middle classes, productivity rates, and related investment. As recent political turmoil shows, the stakes could not be higher.