Download or read book Influence of Wettability on Constitutive Relations and Its Role in Upscaling written by and published by . This book was released on 1998 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt: The lattice Boltzmann (LB) method is applied to simulating multifluid flow in porous media at sub-pore resolution to determine constitutive behaviors. The authors address the importance of the LB technique for identifying process based constitutive relationships, and demonstrate its application through analysis of the influence of wettability on interfacial areas and constitutive relationships. Porous media surface wettability is varied from uniformly strongly wetted by the resident fluid through strongly wetted by the displacing fluid. Spatially variable wettability is also demonstrated. Primary imbibition and drainage displacements are run, and interfacial areas (IFA) as a function of time are determined and compared. Results indicate that wettability is an important factor in displacement behavior and resulting interfacial area. Primary imbibition in a strongly wet material under capillary dominated flows produces film flow, resulting in high IFAs that decrease with increasing saturation and viscous forces. Primary drainage produces initially high IFA that decreases slightly with increasing saturation or pressure drop. Surfaces with spatially variable wetting can have a strong influence on resulting fluid distributions and fluid flow.
Download or read book Influence of Wettability on Dense Nonaqueous Phase Liquid DNAPL Constitutive Relationships in Saturated Porous Media written by Denis Michael O'Carroll and published by . This book was released on 2004 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling and Diagnostics of Polymer Electrolyte Fuel Cells written by Ugur Pasaogullari and published by Springer Science & Business Media. This book was released on 2010-07-23 with total page 412 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume, presented by leading experts in the field, covers the latest advances in diagnostics and modeling of polymer electrolyte fuel cells, from understanding catalyst layer durability to start-up under freezing conditions.
Download or read book Pore scale Microstructure Mechanisms and Models for Subsurface Flow and Transport written by James E. McClure and published by Frontiers Media SA. This book was released on 2022-11-29 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Multiphase Flow in Permeable Media written by Martin J. Blunt and published by Cambridge University Press. This book was released on 2017-02-16 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a fundamental description of multiphase fluid flow through porous rock, based on understanding movement at the pore, or microscopic, scale.
Download or read book Colloids and Interfaces in Oil Recovery written by Spencer Taylor and published by MDPI. This book was released on 2019-06-21 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is well-known that colloid and interface science and petroleum production are inextricably linked. Whether in the reservoir, with its porous structure, or during recovery, crude oil is intimately associated with rock surfaces and with water, often in the form of emulsions. This situation leads to highly complex systems, comprising multiple colloids and interfaces, which require to be optimized if oil is to be recovered efficiently, both in terms of economic cost and with due concern for the environment. This book contains a compilation of contemporary research topics which illustrate various aspects of the importance of colloids and interfaces in crude oil recovery through modifying conditions between the rock, crude oil, and water in the reservoir, in order to achieve improved oil recovery. The specific topics covered relate both to conventional oils, in which waterflooding is the most common secondary and tertiary means of recovery, and to non-conventional heavy oil and natural bitumen, which require thermal recovery methods, owing to their high viscosity.
Download or read book Modelling Water Flow in Unsaturated Porous Media written by Adam Szymkiewicz and published by Springer Science & Business Media. This book was released on 2012-10-11 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book focuses on two issues related to mathematical and numerical modelling of flow in unsaturated porous media. In the first part numerical solution of the governing equations is discussed, with particular emphasis on the spatial discretization of highly nonlinear permeability coefficient. The second part deals with large scale flow in heterogeneous porous media of binary structure. Upscaled models are developed and it is shown that the presence of material heterogeneities may give rise to additional non-equilibrium terms in the governing equations or to hysteresis in the averaged constitutive relationships.
Download or read book An Introduction to Reservoir Simulation Using MATLAB GNU Octave written by Knut-Andreas Lie and published by Cambridge University Press. This book was released on 2019-08-08 with total page 677 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents numerical methods for reservoir simulation, with efficient implementation and examples using widely-used online open-source code, for researchers, professionals and advanced students. This title is also available as Open Access on Cambridge Core.
Download or read book PVT and Phase Behaviour Of Petroleum Reservoir Fluids written by Ali Danesh and published by Elsevier. This book was released on 1998-05-07 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book on PVT and Phase Behaviour Of Petroleum Reservoir Fluids is volume 47 in the Developments in Petroleum Science series. The chapters in the book are: Phase Behaviour Fundamentals, PVT Tests and Correlations, Phase Equilibria, Equations of State, Phase Behaviour Calculations, Fluid Characterisation, Gas Injection, Interfacial Tension, and Application in Reservoir Simulation.
Download or read book Unconventional Reservoir Geomechanics written by Mark D. Zoback and published by Cambridge University Press. This book was released on 2019-05-16 with total page 495 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive overview of the key geologic, geomechanical and engineering principles that govern the development of unconventional oil and gas reservoirs. Covering hydrocarbon-bearing formations, horizontal drilling, reservoir seismology and environmental impacts, this is an invaluable resource for geologists, geophysicists and reservoir engineers.
Download or read book Flow and Transport in Subsurface Environment written by Natarajan Narayanan and published by Springer. This book was released on 2018-04-26 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of contributions from experts working on flow and transport in porous media around the globe. The book includes chapters authored by engineers, scientists, and mathematicians on single and multiphase flow and transport in homogeneous as well as heterogeneous porous media. Addressing various experimental, analytical, and modeling aspects of transport in sub-surface domains, the book offers a valuable resource for graduate students, researchers, and professionals alike.
Download or read book Flowing Matter written by Federico Toschi and published by Springer Nature. This book was released on 2019-09-25 with total page 309 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book, published in the Soft and Biological Matter series, presents an introduction to selected research topics in the broad field of flowing matter, including the dynamics of fluids with a complex internal structure -from nematic fluids to soft glasses- as well as active matter and turbulent phenomena. Flowing matter is a subject at the crossroads between physics, mathematics, chemistry, engineering, biology and earth sciences, and relies on a multidisciplinary approach to describe the emergence of the macroscopic behaviours in a system from the coordinated dynamics of its microscopic constituents. Depending on the microscopic interactions, an assembly of molecules or of mesoscopic particles can flow like a simple Newtonian fluid, deform elastically like a solid or behave in a complex manner. When the internal constituents are active, as for biological entities, one generally observes complex large-scale collective motions. Phenomenology is further complicated by the invariable tendency of fluids to display chaos at the large scales or when stirred strongly enough. This volume presents several research topics that address these phenomena encompassing the traditional micro-, meso-, and macro-scales descriptions, and contributes to our understanding of the fundamentals of flowing matter. This book is the legacy of the COST Action MP1305 “Flowing Matter”.
Download or read book The Fiber Bundle Model written by Alex Hansen and published by John Wiley & Sons. This book was released on 2015-11-02 with total page 254 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gathering research from physics, mechanical engineering, and statistics in a single resource for the first time, this text presents the background to the model, its theoretical basis, and applications ranging from materials science to earth science. The authors start by explaining why disorder is important for fracture and then go on to introduce the fiber bundle model, backed by various different applications. Appendices present the necessary mathematical, computational and statistical background required. The structure of the book allows the reader to skip some material that is too specialized, making this topic accessible to the engineering, mechanics and materials science communities, in addition to providing further reading for graduate students in statistical physics.
Download or read book The Rock Physics Handbook written by Gary Mavko and published by Cambridge University Press. This book was released on 2009-04-30 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: A significantly expanded new edition of this practical guide to rock physics and geophysical interpretation for reservoir geophysicists and engineers.
Download or read book Advances in Geophysics written by Barry Saltzman and published by Academic Press. This book was released on 2000-10-17 with total page 201 pages. Available in PDF, EPUB and Kindle. Book excerpt: This series provides a venue for longer reviews of current advances in geophysics. Written at a level accessible to graduate students, the articles serve to broaden knowledge of various fields and may be useful in courses and seminars.
Download or read book Biofilms in Wastewater Treatment written by Stefan Wuertz and published by IWA Publishing. This book was released on 2003-04-30 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The central theme of the book is the flow of information from experimental approaches in biofilm research to simulation and modeling of complex wastewater systems. Probably the greatest challenge in wastewater research lies in using the methods and the results obtained in one scientific discipline to design intelligent experiments in other disciplines, and eventually to improve the knowledge base the practitioner needs to run wastewater treatment plants. The purpose of Biofilms in Wastewater Treatment is to provide engineers with the knowledge needed to apply the new insights gained by researchers. The authors provide an authoritative insight into the function of biofilms on a technical and on a lab-scale, cover some of the exciting new basic microbiological and wastewater engineering research involving molecular biology techniques and microscopy, and discuss recent attempts to predict the development of biofilms. This book is divided into 3 sections: Modeling and Simulation; Architecture, Population Structure and Function; and From Fundamentals to Practical Application, which all start with a scientific question. Individual chapters attempt to answer the question and present different angles of looking at problems. In addition there is an extensive glossary to familiarize the non-expert with unfamiliar terminology used by microbiologists and computational scientists. The colour plate section of this book can be downloaded by clicking here. (PDF Format 1 MB)
Download or read book Principles of Biomedical Engineering Second Edition written by Sundararajan Madihally and published by Artech House. This book was released on 2019-12-31 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: This updated edition of an Artech House classic introduces readers to the importance of engineering in medicine. Bioelectrical phenomena, principles of mass and momentum transport to the analysis of physiological systems, the importance of mechanical analysis in biological tissues/ organs and biomaterial selection are discussed in detail. Readers learn about the concepts of using living cells in various therapeutics and diagnostics, compartmental modeling, and biomedical instrumentation. The book explores fluid mechanics, strength of materials, statics and dynamics, basic thermodynamics, electrical circuits, and material science. A significant number of numerical problems have been generated using data from recent literature and are given as examples as well as exercise problems. These problems provide an opportunity for comprehensive understanding of the basic concepts, cutting edge technologies and emerging challenges. Describing the role of engineering in medicine today, this comprehensive volume covers a wide range of the most important topics in this burgeoning field. Moreover, you find a thorough treatment of the concept of using living cells in various therapeutics and diagnostics. Structured as a complete text for students with some engineering background, the book also makes a valuable reference for professionals new to the bioengineering field. This authoritative textbook features numerous exercises and problems in each chapter to help ensure a solid understanding of the material.
