Download or read book Process Control and Yarn Quality in Spinning written by G. Thilagavathi and published by CRC Press. This book was released on 2016-01-05 with total page 414 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book outlines the concepts of raw material selection, control of various process parameters in the preparatory processes like blow room, carding, combing preparatory and comber to optimize the process conditions, and analysis and interpretation of various types of test reports to find out the source of fault.

Download or read book Process Management in Spinning written by R. Senthil Kumar and published by CRC Press. This book was released on 2014-09-23 with total page 408 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Straightforward Text Summarizing All Aspects of Process ControlTextile manufacturing is one of the largest industries in the world, second only to agriculture. Spinning covers a prominent segment in textile manufacturing, and this budding industry continues to thrive and grow. Process Management in Spinning considers aspect of process management,

Download or read book Physiology of Cotton written by James McD. Stewart and published by Springer Science & Business Media. This book was released on 2009-11-04 with total page 573 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cotton production today is not to be undertaken frivolously if one expects to profit by its production. If cotton production is to be sustainable and produced profitably, it is essential to be knowledgeable about the growth and development of the cotton plant and in the adaptation of cultivars to the region as well as the technology available. In addition, those individuals involved in growing cotton should be familiar with the use of management aids to know the most profitable time to irrigate, apply plant growth regulators, herbicides, foliar fertilizers, insecticides, defoliants, etc. The chapters in this book were assembled to provide those dealing with the production of cotton with the basic knowledge of the physiology of the plant required to manage the cotton crop in a profitable manner.

Download or read book Backpacker written by and published by . This book was released on 2001-03 with total page 206 pages. Available in PDF, EPUB and Kindle. Book excerpt: Backpacker brings the outdoors straight to the reader's doorstep, inspiring and enabling them to go more places and enjoy nature more often. The authority on active adventure, Backpacker is the world's first GPS-enabled magazine, and the only magazine whose editors personally test the hiking trails, camping gear, and survival tips they publish. Backpacker's Editors' Choice Awards, an industry honor recognizing design, feature and product innovation, has become the gold standard against which all other outdoor-industry awards are measured.

Download or read book Fancy Yarns written by R H Gong and published by Elsevier. This book was released on 2002-10-11 with total page 172 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fancy yarns are those produced with some deliberate discontinuity introduced either into the colour or form of the article with the intention of producing an enhanced aesthetic impression. Most fancy yarns are produced by specialist spinners using machines modified or specially developed for the purpose; others are produced from 'fancy slivers' used as minor components of yarns made by spinners with normal equipment; still others are made exclusively by filament yarns, using adaptations of the airjet texturising process.The text is well illustrated with diagrams, drawings and photographs of yarn structures and the equipment used to create them. It contains close-ups of the yarns themselves together with an analysis to show how appearance and texture can be varied by changing the feedstock or machine settings.Textile historians and conservationists will find the book especially useful in helping to identify yarn types in historical fabrics and in developing an understanding of the variety of yarns available in antiquity and typical uses for them.Fancy yarns is an essential reference to a wide range of industrial textile technologists including spinners, knitters and weavers, fabric and garment manufacturers, students of textile technology and design and curators and conservationists of historical textile collections. - The first book to be devoted exclusively to fancy yarns and fancy doubled yarns - Describes all the major yarn types, their manufacture and potential for use in garments and furnishing fabrics - Includes over 100 drawings, diagrams and photographs

Download or read book ECO COMPASS written by Xiaosu Yi and published by MDPI. This book was released on 2019-04-25 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, mainly man-made materials, such as carbon and glass fibers, are used to produce composite parts in aviation. Renewable materials, such as natural fibers or bio-sourced resin systems, have not yet found their way into aviation. The project ECO-COMPASS aims to evaluate the potential applications of ecologically improved composite materials in the aviation sector in an international collaboration of Chinese and European partners. Natural fibers such as flax and ramie will be used for different types of reinforcements and sandwich cores. Furthermore, bio-based epoxy resins to substitute bisphenol-A based epoxy resins in secondary structures are under investigation. Adapted material protection technologies to reduce environmental influence and to improve fire resistance are needed to fulfil the demanding safety requirements in aviation. Modelling and simulation of chosen eco-composites aims for an optimized use of materials while a Life Cycle Assessment aims to prove the ecological advantages compared to synthetic state-of-the-art materials. This Special Issue provides selected papers from the project consortium partners.

Download or read book Textile Materials for Lightweight Constructions written by Chokri Cherif and published by Springer. This book was released on 2015-08-11 with total page 686 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this book, experts on textile technologies convey both general and specific information on various aspects of textile engineering, ready-made technologies, and textile chemistry. They describe the entire process chain from fiber materials to various yarn constructions, 2D and 3D textile constructions, preforms, and interface layer design. In addition, the authors introduce testing methods, shaping and simulation techniques for the characterization of and structural mechanics calculations on anisotropic, pliable high-performance textiles, including specific examples from the fields of fiber plastic composites, textile concrete and textile membranes. Readers will also be familiarized with the potential offered by increasingly employed textile structures, for instance in the fields of composite technology, construction technology, security technology and membrane technology.

Download or read book Electrospun Nanofibers written by Mehdi Afshari and published by Woodhead Publishing. This book was released on 2016-09-13 with total page 650 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrospun Nanofibers covers advances in the electrospinning process including characterization, testing and modeling of electrospun nanofibers, and electrospinning for particular fiber types and applications. Electrospun Nanofibers offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science. Electrospinning is the most commercially successful process for the production of nanofibers and rising demand is driving research and development in this field. Rapid progress is being made both in terms of the electrospinning process and in the production of nanofibers with superior chemical and physical properties. Electrospinning is becoming more efficient and more specialized in order to produce particular fiber types such as bicomponent and composite fibers, patterned and 3D nanofibers, carbon nanofibers and nanotubes, and nanofibers derived from chitosan. - Provides systematic and comprehensive coverage of the manufacture, properties, and applications of nanofibers - Covers recent developments in nanofibers materials including electrospinning of bicomponent, chitosan, carbon, and conductive fibers - Brings together expertise from academia and industry to provide comprehensive, up-to-date information on nanofiber research and development - Offers systematic and comprehensive coverage for academic researchers, industry professionals, and postgraduate students working in the field of fiber science

Download or read book Polymer Matrix Composites and Technology written by Ru-Min Wang and published by Elsevier. This book was released on 2011-07-14 with total page 570 pages. Available in PDF, EPUB and Kindle. Book excerpt: Given such properties as low density and high strength, polymer matrix composites have become a widely used material in the aerospace and other industries. Polymer matrix composites and technology provides a helpful overview of these materials, their processing and performance.After an introductory chapter, part one reviews the main reinforcement and matrix materials used as well as the nature of the interface between them. Part two discusses forming and molding technologies for polymer matrix composites. The final part of the book covers key aspects of performance, including tensile, compression, shear and bending properties as well as impact, fatigue and creep behaviour.Polymer matrix composites and technology provides both students and those in industry with a valuable introduction to and overview of this important class of materials. - Provides a helpful overview of these materials, their processing and performance incorporating naming and classification of composite materials - Reviews the main reinforcement and matrix materials used as well as the nature of the interface between them including damage mechanisms - Discusses forming and molding technologies for polymer matrix composites outlining various techniques and technologies

Download or read book Encyclopedia of Lubricants and Lubrication written by Theo Mang and published by Springer. This book was released on 2014-01-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The importance of lubricants in virtually all fields of the engineering industry is reflected by an increasing scientific research of the basic principles. Energy efficiency and material saving are just two core objectives of the employment of high-tech lubricants. The encyclopedia presents a comprehensive overview of the current state of knowledge in the realm of lubrication. All the aspects of fundamental data, underlying concepts and use cases, as well as theoretical research and last but not least terminology are covered in hundreds of essays and definitions, authored by experts in their respective fields, from industry and academic institutes.

Download or read book Advances in Yarn Spinning Technology written by C A Lawrence and published by Elsevier. This book was released on 2010-09-27 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an invaluable single source of information on the advances in yarn spinning technologies. Advanced spinning systems are described and comparisons are made of the properties of the yarns produced, and resultant finished products, with those from conventional systems.Part one provides an introduction to yarn fibre spinning and structure. Chapters discuss the principles of ring spinning and open-end spinning of yarns. Yarn structure and properties from different spinning techniques and yarn structural requirements for knitted and woven fabrics are also examined. Part two covers advances in particular yarn spinning technologies. Topics range from siro spinning to compact spinning technology and air-jet spinning. Final chapters explore how to minimise fibre damage which occur during spinning and the use of spin finishes for textiles.With its distinguished editor and array of international contributors, Advances in yarn spinning technology is an important text for spinners, yarn manufacturers and fabric producers, as well as researchers, technicians, engineers and technologists in this sector of the textile industry. - Documents advances in spinning technologies and presents comparisons between systems - Assesses particular textile spinning technologies with specific chapters focusing on siro, compact, rotor, friction and air-jet spinning - Reviews measures to minimise fibre damage caused by spinning are investigated with specific relevance to rotor and friction spinning

Download or read book Hereditary Genius written by Sir Francis Galton and published by . This book was released on 1870 with total page 416 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book A Farewell to Alms written by Gregory Clark and published by Princeton University Press. This book was released on 2008-12-29 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why are some parts of the world so rich and others so poor? Why did the Industrial Revolution--and the unprecedented economic growth that came with it--occur in eighteenth-century England, and not at some other time, or in some other place? Why didn't industrialization make the whole world rich--and why did it make large parts of the world even poorer? In A Farewell to Alms, Gregory Clark tackles these profound questions and suggests a new and provocative way in which culture--not exploitation, geography, or resources--explains the wealth, and the poverty, of nations. Countering the prevailing theory that the Industrial Revolution was sparked by the sudden development of stable political, legal, and economic institutions in seventeenth-century Europe, Clark shows that such institutions existed long before industrialization. He argues instead that these institutions gradually led to deep cultural changes by encouraging people to abandon hunter-gatherer instincts-violence, impatience, and economy of effort-and adopt economic habits-hard work, rationality, and education. The problem, Clark says, is that only societies that have long histories of settlement and security seem to develop the cultural characteristics and effective workforces that enable economic growth. For the many societies that have not enjoyed long periods of stability, industrialization has not been a blessing. Clark also dissects the notion, championed by Jared Diamond in Guns, Germs, and Steel, that natural endowments such as geography account for differences in the wealth of nations. A brilliant and sobering challenge to the idea that poor societies can be economically developed through outside intervention, A Farewell to Alms may change the way global economic history is understood.

Download or read book Handbook of Yarn Production written by Peter R. Lord and published by Elsevier. This book was released on 2003-07-11 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by one of the world's leading experts, Handbook of yarn production: technology, science and economics is an authoritative and comprehensive guide to textile yarn manufacturing. The book is designed to allow readers to explore the subject in various levels of detail. The first three chapters provide an overview of yarn production, products and key principles. The major part of the book then reviews in detail the production processes for short-staple, long-staple and filament yarns.There are also chapters on quality control and the economics of staple-yarn production.The final part of the book consists of a series of appendices which provide in-depth analysis of key topics with detailed technical data and worked examples which is an invaluable reference in itself for anyone concerned with the behaviour, performance and economics of a textile mill.Handbook of yarn production: technology, science and economics is a standard work for both yarn manufacturers and those researching and studying in this important area of the textile industry. - A practical and authoritative new handbook for yarn manufacturing - Shows how problems can arise and how to deal with them - Includes invaluable technical data, calculations, worked examples and case studies

Download or read book Does What You Export Matter written by Daniel Lederman and published by World Bank Publications. This book was released on 2012-06-18 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Does what economies export matter for development? If so, can industrial policies improve on the export basket generated by the market? This book approaches these questions from a variety of conceptual and policy viewpoints. Reviewing the theoretical arguments in favor of industrial policies, the authors first ask whether existing indicators allow policy makers to identify growth-promoting sectors with confidence. To this end, they assess, and ultimately cast doubt upon, the reliability of many popular indicators advocated by proponents of industrial policy. Second, and central to their critique, the authors document extraordinary differences in the performance of countries exporting seemingly identical products, be they natural resources or 'high-tech' goods. Further, they argue that globalization has so fragmented the production process that even talking about exported goods as opposed to tasks may be misleading. Reviewing evidence from history and from around the world, the authors conclude that policy makers should focus less on what is produced, and more on how it is produced. They analyze alternative approaches to picking winners but conclude by favoring 'horizontal-ish' policies--for instance, those that build human capital or foment innovation in existing and future products—that only incidentally favor some sectors over others.

Download or read book Recycled Polyester written by Subramanian Senthilkannan Muthu and published by Springer Nature. This book was released on 2019-09-26 with total page 93 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of recycled polyesters, which are an important sustainable raw material in textile production. It discusses the manufacturing methods and the unique properties of recycled polyesters manufactured using the different methods. It also highlights the various test methods and identification mechanisms for recycled polyesters, which are very essential for ensuring the traceability and conformity of usage of recycled polyester in the final product.

Download or read book Technology and Global Change written by Arnulf Grübler and published by Cambridge University Press. This book was released on 2003-10-16 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first book to comprehensibly describe how technology has shaped society and the environment over the last 200 years. It will be useful for researchers, as a textbook for graduate students, for people engaged in long-term policy planning in industry and government, for environmental activists, and for the wider public interested in history, technology, or environmental issues.