Download or read book Masters Theses in the Pure and Applied Sciences written by Wade H. Shafer and published by Springer Science & Business Media. This book was released on 2013-11-21 with total page 307 pages. Available in PDF, EPUB and Kindle. Book excerpt: Masters Theses in the Pure and Applied Sciences was first conceived, published, and dis· seminated by the Center for Information and Numerical Data Analysis and Synthesis (CINDAS) *at Purdue University in 1957, starting its coverage of theses with the academic year 1955. Beginning with Volume 13, the printing and dissemination phases of the ac· tivity were transferred to University Microfilms/Xerox of Ann Arbor, Michigan, with the thought that such an arrangement would be more beneficial to the academic and general scientific and technical community. After five years of this joint undertaking we had concluded that it was in the interest of all concerned if the printing and distribution of the volume were handled by an international publishing house to assure improved service and broader dissemination. Hence, starting with Volume 18, Masters Theses in the Pure and Applied Sciences has been disseminated on a worldwide basis by Plenum Publishing Corporation of New York, and in the same year the coverage was broadened to include Canadian universities. All back issues can also be ordered from Plenum. We have reported in Volume 20 (thesis year 1975) a total of 10,374 theses titles from 28 Canadian and 239 United States universities. We are sure that this broader base for theses titles reported will greatly enhance the value of this important annual reference work. The organization of Volume 20 is identical to that of past years. It consists of theses titles arranged by discipline and by university within each discipline.

Download or read book Applied Mechanics Reviews written by and published by . This book was released on 1981 with total page 960 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat transfer written by Yunus Ali Cengel and published by . This book was released on 2003 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Theoretical Chemical Engineering Abstracts written by and published by . This book was released on 1974 with total page 774 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Progress in Heat and Mass Transfer written by and published by . This book was released on 1971 with total page 576 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Engineering Heat Transfer written by G. F. Nellis and published by Cambridge University Press. This book was released on 2020-07-30 with total page 1027 pages. Available in PDF, EPUB and Kindle. Book excerpt: Equips students with the essential knowledge, skills, and confidence to solve real-world heat transfer problems using EES, MATLAB, and FEHT.

Download or read book Nanofluidics written by Efstathios E. (Stathis) Michaelides and published by Springer. This book was released on 2014-05-19 with total page 351 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume offers a comprehensive examination of the subject of heat and mass transfer with nanofluids as well as a critical review of the past and recent research projects in this area. Emphasis is placed on the fundamentals of the transport processes using particle-fluid suspensions, such as nanofluids. The nanofluid research is examined and presented in a holistic way using a great deal of our experience with the subjects of continuum mechanics, statistical thermodynamics, and non-equilibrium thermodynamics of transport processes. Using a thorough database, the experimental, analytical, and numerical advances of recent research in nanofluids are critically examined and connected to past research with medium and fine particles as well as to functional engineering systems. Promising applications and technological issues of heat/mass transfer system design with nanofluids are also discussed. This book also: Provides a deep scientific analysis of nanofluids using classical thermodynamics and statistical thermodynamics to explain and interpret experimental observations Presents the theory and experimental results for both thermodynamic and transport properties Examines all transport properties and transport processes as well as their relationships through the pertinent macroscopic coefficients Combines recent knowledge pertaining to nanofluids with the previous fifty years of research on particulate flows, including research on transient flow and heat transfer of particulate suspensions Conducts an holistic examination of the material from more than 500 archival publications

Download or read book Heat Transfer and Fluid Flow in Minichannels and Microchannels written by Satish Kandlikar and published by Elsevier. This book was released on 2006 with total page 492 pages. Available in PDF, EPUB and Kindle. Book excerpt: &Quot;This book explores flow through passages with hydraulic diameters from about 1 [mu]m to 3 mm, covering the range of minichannels and microchannels. Design equations along with solved examples and practice problems are also included to serve the needs of practicing engineers and students in a graduate course."--BOOK JACKET.

Download or read book Thermal Processing of Packaged Foods written by S. Donald Holdsworth and published by Springer. This book was released on 2015-11-30 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition discusses the physical and engineering aspects of the thermal processing of packaged foods and examines the methods which have been used to establish the time and temperature of processes suitable to achieve adequate sterilization or pasteurization of the packaged food. The third edition is totally renewed and updated, including new concepts and areas that are relevant for thermal food processing: This edition is formed by 22 chapters—arranged in five parts—that maintain great parts of the first and second editions The First part includes five chapters analyzing different topics associated to heat transfer mechanism during canning process, kinetic of microbial death, sterilization criteria and safety aspect of thermal processing. The second part, entitled Thermal Food Process Evaluation Techniques, includes six chapters and discusses the main process evaluation techniques. The third part includes six chapters treating subjects related with pressure in containers, simultaneous sterilization and thermal food processing equipment. The fourth part includes four chapters including computational fluid dynamics and multi-objective optimization. The fifth part, entitled Innovative Thermal Food Processing, includes a chapter focused on two innovative processes used for food sterilization such high pressure with thermal sterilization and ohmic heating. Thermal Processing of Pa ckaged Foods, Third Edition is intended for a broad audience, from undergraduate to post graduate students, scientists, engineers and professionals working for the food industry.

Download or read book Handbook of Heat Transfer written by Warren M. Rohsenow and published by McGraw-Hill Companies. This book was released on 1973 with total page 1552 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Heat Exchanger Design Guide written by Manfred Nitsche and published by Butterworth-Heinemann. This book was released on 2015-09-28 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Heat Exchanger Design Guide: A Practical Guide for Planning, Selecting and Designing of Shell and Tube Exchangers takes users on a step-by-step guide to the design of heat exchangers in daily practice, showing how to determine the effective driving temperature difference for heat transfer. Users will learn how to calculate heat transfer coefficients for convective heat transfer, condensing, and evaporating using simple equations. Dew and bubble points and lines are covered, with all calculations supported with examples. This practical guide is designed to help engineers solve typical problems they might encounter in their day-to-day work, and will also serve as a useful reference for students learning about the field. The book is extensively illustrated with figures in support of the text and includes calculation examples to ensure users are fully equipped to select, design, and operate heat exchangers. - Covers design method and practical correlations needed to design practical heat exchangers for process application - Includes geometrical calculations for the tube and shell side, also covering boiling and condensation heat transfer - Explores heat transfer coefficients and temperature differences - Designed to help engineers solve typical problems they might encounter in their day-to-day work, but also ideal as a useful reference for students learning about the field

Download or read book Convection in Porous Media written by D.A. Nield and published by Springer Science & Business Media. This book was released on 2006-12-06 with total page 655 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition includes nearly 1000 new references.

Download or read book Rotary Reactor Engineering written by Daizo Kunii and published by Elsevier. This book was released on 2007-12-08 with total page 221 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rotary reactors or rotary kilns are the reactors facilitating the chemical reaction between the gas and solid phases usually at high temperatures.This book, which is written by an expert in the field, describes the principles of the rotary reactor and the mode of its operation. These reactors are widely used in various chemical process industries (food, pharmaceuticals) and metallurgical industries.The book defines the physiochemical aspects of the rotart reactors and provides theoretical equations of their operation.The first part of this book presents the fundamentals; solid movement, conversion of solids, and heat transfer. The middle part of the book applies these equations to a variety of processes which have been developed so far, and shows how they are used. In its last part, conceptual designs of novel rotary reactors are proposed, which performance characteristics are predicted on the basis of above equations, especially, in gasification of solid wastes.- Defines the rotary reactors and their mode of operation.- Defines all operating parameters and gives equations to predict the operation of rotary reactors under various conditions.- Includes a number of practical examples from various industrial applications (metallurgical waste treatment etc).

Download or read book Fluid Flow and Heat Transfer in Rotating Porous Media written by Peter Vadasz and published by Springer. This book was released on 2015-07-28 with total page 85 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Book concentrates the available knowledge on rotating fluid flow and heat transfer in porous media in one single reference. Dr. Vadasz develops the fundamental theory of rotating flow and heat transfer in porous media and introduces systematic classification and identification of the relevant problems. An initial distinction between rotating flows in isothermal heterogeneous porous systems and natural convection in homogeneous non-‐isothermal porous systems provides the two major classes of problems to be considered. A few examples of solutions to selected problems are presented, highlighting the significant impact of rotation on the flow in porous media.

Download or read book Mechanical Properties of Ceramics written by John B. Wachtman and published by John Wiley & Sons. This book was released on 2009-08-13 with total page 496 pages. Available in PDF, EPUB and Kindle. Book excerpt: A Comprehensive and Self-Contained Treatment of the Theory and Practical Applications of Ceramic Materials When failure occurs in ceramic materials, it is often catastrophic, instantaneous, and total. Now in its Second Edition, this important book arms readers with a thorough and accurate understanding of the causes of these failures and how to design ceramics for failure avoidance. It systematically covers: Stress and strain Types of mechanical behavior Strength of defect-free solids Linear elastic fracture mechanics Measurements of elasticity, strength, and fracture toughness Subcritical crack propagation Toughening mechanisms in ceramics Effects of microstructure on toughness and strength Cyclic fatigue of ceramics Thermal stress and thermal shock in ceramics Fractography Dislocation and plastic deformation in ceramics Creep and superplasticity of ceramics Creep rupture at high temperatures and safe life design Hardness and wear And more While maintaining the first edition's reputation for being an indispensable professional resource, this new edition has been updated with sketches, explanations, figures, tables, summaries, and problem sets to make it more student-friendly as a textbook in undergraduate and graduate courses on the mechanical properties of ceramics.

Download or read book Solar Engineering of Thermal Processes Photovoltaics and Wind written by John A. Duffie and published by John Wiley & Sons. This book was released on 2020-03-24 with total page 930 pages. Available in PDF, EPUB and Kindle. Book excerpt: The bible of solar engineering that translates solar energy theory to practice, revised and updated The updated Fifth Edition of Solar Engineering of Thermal Processes, Photovoltaics and Wind contains the fundamentals of solar energy and explains how we get energy from the sun. The authors—noted experts on the topic—provide an introduction to the technologies that harvest, store, and deliver solar energy, such as photovoltaics, solar heaters, and cells. The book also explores the applications of solar technologies and shows how they are applied in various sectors of the marketplace. The revised Fifth Edition offers guidance for using two key engineering software applications, Engineering Equation Solver (EES) and System Advisor Model (SAM). These applications aid in solving complex equations quickly and help with performing long-term or annual simulations. The new edition includes all-new examples, performance data, and photos of current solar energy applications. In addition, the chapter on concentrating solar power is updated and expanded. The practice problems in the Appendix are also updated, and instructors have access to an updated print Solutions Manual. This important book: • Covers all aspects of solar engineering from basic theory to the design of solar technology • Offers in-depth guidance and demonstrations of Engineering Equation Solver (EES) and System Advisor Model (SAM) software • Contains all-new examples, performance data, and photos of solar energy systems today • Includes updated simulation problems and a solutions manual for instructors Written for students and practicing professionals in power and energy industries as well as those in research and government labs, Solar Engineering of Thermal Processes, Fifth Edition continues to be the leading solar engineering text and reference.

Download or read book Engineering Heat Transfer written by William S. Janna and published by CRC Press. This book was released on 2018-10-03 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most heat transfer texts include the same material: conduction, convection, and radiation. How the material is presented, how well the author writes the explanatory and descriptive material, and the number and quality of practice problems is what makes the difference. Even more important, however, is how students receive the text. Engineering Heat Transfer, Third Edition provides a solid foundation in the principles of heat transfer, while strongly emphasizing practical applications and keeping mathematics to a minimum. New in the Third Edition: Coverage of the emerging areas of microscale, nanoscale, and biomedical heat transfer Simplification of derivations of Navier Stokes in fluid mechanics Moved boundary flow layer problems to the flow past immersed bodies chapter Revised and additional problems, revised and new examples PDF files of the Solutions Manual available on a chapter-by-chapter basis The text covers practical applications in a way that de-emphasizes mathematical techniques, but preserves physical interpretation of heat transfer fundamentals and modeling of heat transfer phenomena. For example, in the analysis of fins, actual finned cylinders were cut apart, fin dimensions were measures, and presented for analysis in example problems and in practice problems. The chapter introducing convection heat transfer describes and presents the traditional coffee pot problem practice problems. The chapter on convection heat transfer in a closed conduit gives equations to model the flow inside an internally finned duct. The end-of-chapter problems proceed from short and simple confidence builders to difficult and lengthy problems that exercise hard core problems solving ability. Now in its third edition, this text continues to fulfill the author’s original goal: to write a readable, user-friendly text that provides practical examples without overwhelming the student. Using drawings, sketches, and graphs, this textbook does just that. PDF files of the Solutions Manual are available upon qualifying course adoptions.