Download or read book Influence of Heat Treatment on the Microstructure and Mechanical Properties of 6061 Aluminum Alloy written by and published by . This book was released on 2013 with total page 54 pages. Available in PDF, EPUB and Kindle. Book excerpt: The process of heat treatment is the method by which metals are heated and cooled in a series of specific operations that never allow the metal to reach the molten state. The purpose of the heat treatment is to cause desire changes in the metallurgical structure and thus in the properties of metal parts. The aim of this research is to study the influence of heat treatment and natural aging mechanism on the microstructure and mechanical properties of aluminum alloy 6061. The aluminum alloy 6061 sample heat treated using T4 method which is heat treated at 550°C, 575°C and 600°C and then naturally aged at ambient environment for 3 hours. After heat treated process, the effects were investigated in terms of microstructure using metallurgical analysis and mechanical properties by tensile tests and hardness test. Tensile tests show that the yield stress and UTS have high value when heat treated at 600°C where 103.28693 MPa and 195.246895 MPa meanwhile the Young modulus heat treated at 550°C have high value; 84417.95106 MPa. For heat treatment specimens, the high VHN is specimen's heat treated at 600°C which have value 85.7 and the lower VHN value is specimen's heat treated at 550°C with value 57.5. The heat treatment process result soft aluminum alloy 6061. Lastly for microstructure observation, different microstructure appear within different heat treatment temperature. From the data and result that already determined, it achieved the objectives and scope of this research.
Download or read book Fundamentals of Aluminium Metallurgy written by Roger Lumley and published by Woodhead Publishing. This book was released on 2018-05-22 with total page 594 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fundamentals of Aluminium Metallurgy: Recent Advances updates the very successful book Fundamentals of Aluminium Metallurgy. As the technologies related to casting and forming of aluminum components are rapidly improving, with new technologies generating alternative manufacturing methods that improve competitiveness, this book is a timely resource. Sections provide an overview of recent research breakthroughs, methods and techniques of advanced manufacture, including additive manufacturing and 3D printing, a comprehensive discussion of the status of metalcasting technologies, including sand casting, permanent mold casting, pressure diecastings and investment casting, and recent information on advanced wrought alloy development, including automotive bodysheet materials, amorphous glassy materials, and more. Target readership for the book includes PhD students and academics, the casting industry, and those interested in new industrial opportunities and advanced products. - Includes detailed and specific information on the processing of aluminum alloys, including additive manufacturing and advanced casting techniques - Written for a broad ranging readership, from academics, to those in the industry who need to know about the latest techniques for working with aluminum - Comprehensive, up-to-date coverage, with the most recent advances in the industry
Download or read book Advanced High Strength Steel and Press Hardening Proceedings of the 3rd International Conference on Advanced High Strength Steel and Press Hardening Ichsu2016 written by Yisheng Zhang and published by World Scientific Publishing Company. This book was released on 2016-12-29 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This proceedings brings together seventy seven selected papers presented at the 3rd International Conference on Advanced High Strength Steel and Press Hardening (ICHSU2016), which was held in Xi'an, China, during August 25-27, 2016. In this rapid growing market in advanced high strength steel and press hardening, in particularly demand from automotive industry and sustainability community to develop light-weight materials for Body in white or BIW, has motivated us to organize ICHSU2016, soon after the successful conclusion of our ICHSU2015 last year to encourage experts all over the world to get together again to exchange note and ideas as how to move the R&D in press hardening technology forward in the new era. The purpose of holding ICHSU2016 is to satisfy the increasingly urgent requirement of reducing the weight of vehicle structures and increasing passenger safety. This conference arouses great interests and attentions from domestic and foreign researchers in hot stamping field, of the articles accepted, covering almost all the current topics of advanced high strength steel and press hardening technology, which includes materials & testing, modeling & simulation, process design, tribology & tools, equipment and product properties.
Download or read book Influence of Welding and Heat Treatment on Aluminum Alloys written by Eric B. Hilty and published by . This book was released on 2014 with total page 111 pages. Available in PDF, EPUB and Kindle. Book excerpt: The welding of structural materials, such as aluminum alloys 6063, 6061 and 6005A, does have an adverse influence on the microstructure and mechanical properties at locations immediately adjacent to the weld. The influence of heat input, due to welding and artificial aging, was investigated on aluminum alloy extrusions of 6063, 6061 and 6005A. Uniaxial tensile tests, in conjunction with scanning electron microscopy observations, were done on the: (i) as-provided alloy in the natural temper, (ii) the as-provided alloy artificially aged, (iii) the as-welded alloy in the natural temper, and (iv) the as-welded alloy subject to heat treatment. The welding process used was gas metal arc (GMAW) with spray transfer at approximately 140-220 amps of current at 22-26 volts. The artificial aging used was a precipitation heat treatment for 6 hours at 360oF. The aluminum alloys of the 6XXX series contain magnesium (Mg) and silicone (Si) and are responsive to temperature. Optical microscopy observations revealed the influence of artificial aging to cause change in both size and shape of the second-phase particles present and distributed through the microstructure. The temperature and time of exposure to heat treatment did cause the second-phase particles to both precipitate and migrate through the microstructure resulting in an observable change in strength of the material. Uniaxial tensile tests were conducted for desired specimen thicknesses for sake of comparison. Section 6.4.2-2 of the 2010 Aluminum Design manual discusses provisions for mechanical properties of welded and artificially aged aluminum light poles, fabricated from aluminum alloy 6063 and 6005A. A basis for these provisions was the result of older round-robin testing programs [2, 3]. However, results of the studies were never placed in the open literature. Hence, the focus of this study was to determine the expected mechanical properties of welded and artificially aged 6063, 6061 and 6005A aluminum alloys and publish the results. Tensile tests revealed the welded aluminum alloy to have lower strength, both yield and ultimate tensile strength, when compared to the as-received un-welded counterpart. The impact of post-weld heat treatment on tensile properties and resultant fracture behavior is presented and briefly discussed in light of intrinsic microstructural effects and nature of loading.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Heat Treatment of Aluminium Alloy written by Dr. G. Prabhakara Rao and published by Book Saga Publications. This book was released on 2023-11-28 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book, "Heat Treatment of Aluminium Alloy", is essential for anyone looking to unlock the potential of aluminum alloys. It provides comprehensive and detailed information about the properties, classifications, and heat treatment processes of aluminum alloys, enabling readers to design and manufacture components with improved mechanical and wear properties. With this book, readers will gain an understanding of the alloying elements that enhance castability, wear resistance, and hardness, and learn how to modify aluminum alloys to meet their needs. Benefits from reading this book: - Gain an in-depth understanding of aluminum alloys and the heat treatment processes necessary for improved mechanical and wear properties - Learn how to modify aluminum alloys for better castability, wear resistance, and hardness - Discover how the microstructure, machinability, and corrosive behavior affect the performance of aluminum alloys What's included in the book: - Extensive use of aluminum alloys since 1940 - Classification of aluminum alloys into wrought and cast types - Designation systems for aluminum alloys - Impact of different alloying elements - Modification techniques to improve mechanical properties - Various heat treatment processes - Microstructure, machinability, and corrosive behavior Unlock the potential of aluminum alloys with this book. Buy now before the price changes.
Download or read book Friction Stir Welding of Dissimilar Alloys and Materials written by Nilesh Kulkarni and published by Butterworth-Heinemann. This book was released on 2015-03-05 with total page 135 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will summarize research work carried out so far on dissimilar metallic material welding using friction stir welding (FSW). Joining of dissimilar alloys and materials are needed in many engineering systems and is considered quite challenging. Research in this area has shown significant benefit in terms of ease of processing, material mixing, and superior mechanical properties such as joint efficiencies. A summary of these results will be discussed along with potential guidelines for designers. - Explains solid phase process and distortion of work piece - Addresses dimensional stability and repeatability - Addresses joint strength - Covers metallurgical properties in the joint area - Covers fine microstructure - Introduces improved materials use (e.g., joining different thicknesses) - Covers decreased fuel consumption in light weight aircraft - Addresses automotive and ship applications
Download or read book Alstruc written by Anne Lise Dons and published by . This book was released on 2002 with total page 134 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Welding and Joining of Magnesium Alloys written by L Liu and published by Woodhead Publishing. This book was released on 2010-10-28 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to the wide application of magnesium alloys in metals manufacturing, it is very important to employ a reliable method of joining these reactive metals together and to other alloys. Welding and joining of magnesium alloys provides a detailed review of both established and new techniques for magnesium alloy welding and their characteristics, limitations and applications. Part one covers general issues in magnesium welding and joining, such as welding materials, metallurgy and the joining of magnesium alloys to other metals such as aluminium and steel. The corrosion and protection of magnesium alloy welds are also discussed. In part two particular welding and joining techniques are reviewed, with chapters covering such topics as inert gas welding, metal inert gas welding and laser welding, as well as soldering, mechanical joining and adhesive bonding. The application of newer techniques to magnesium alloys, such as hybrid laser-arc welding, activating flux tungsten inert gas welding and friction stir, is also discussed. With its distinguished editor and expert team of contributors, Welding and joining of magnesium alloys is a comprehensive reference for producers of primary magnesium and those using magnesium alloys in the welding, automotive and other such industries, as well as academic researchers in metallurgy and materials science.
Download or read book Elements of Metallurgy and Engineering Alloys written by Flake C. Campbell and published by ASM International. This book was released on 2008-01-01 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: This practical reference provides thorough and systematic coverage on both basic metallurgy and the practical engineering aspects of metallic material selection and application.
Download or read book Aluminum written by John E. Hatch and published by ASM International. This book was released on 1984-01-01 with total page 452 pages. Available in PDF, EPUB and Kindle. Book excerpt: Comprehensive information for the American aluminium industry Collective effort of 53 recognized experts on aluminium and aluminium alloys Joint venture by world renowned authorities-the Aluminium Association Inc. and American Society for Metals. The completely updated source of information on aluminium industry as a whole rather than its individual contributors. this book is an opportunity to gain from The knowledge of the experts working for prestigious companies such as Alcoa, Reynolds Metals Co., Alcan International Ltd., Kaiser Aluminium & Chemical Corp., Martin Marietta Laboratories and Anaconda Aluminium Co. It took four years of diligent work to complete this comprehensive successor to the classic volume, Aluminium, published by ASM in 1967. Contents: Properties of Pure Aluminum Constitution of Alloys Microstructure of Alloys Work Hardening Recovery, Recrystalization and Growth Metallurgy of Heat Treatment and General Principles of Precipitation Hardening Effects of Alloying Elements and Impurities on Properties Corrosion Behaviour Properties of Commercial Casting Alloys Properties of Commercial Wrought Alloys Aluminum Powder and Powder Metallurgy Products.
Download or read book The effect of heat treatment on microstructure and mechanical properties of AA6061 welded using TIG written by Abd Rahim Abd Razak and published by . This book was released on 2012 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Aluminium Alloys written by Subbarayan Sivasankaran and published by BoD – Books on Demand. This book was released on 2017-12-21 with total page 326 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major issue of energy saving and conservation of the environment in the world is being emphasized to us to concentrate on lightweight materials in which aluminium alloys are contributing more in applications in the twenty-first century. Aluminium and its related materials possess lighter weight, considerable strength, more corrosion resistance and ductility. Especially from the past one decade, the use of aluminium alloys is increasing in construction field, transportation industries, packaging purposes, automotive, defence, aircraft and electrical sectors. Around 85% is being used in the form of wrought products, which replace the use of cast iron. Further, the major features of aluminium alloy are recyclability and its abundant availability in the world. In general, aluminium and its related materials are being processed via casting, drawing, forging, rolling, extrusion, welding, powder metallurgy process, etc. To improve the physical and mechanical properties, scientists are doing more research and adding some second-phase particles in to it called composites in addition to heat treatment. Therefore, to explore more in this field, the present book has been aimed and focused to bridge all scientists who are working in this field. The main objective of the present book is to focus on aluminium, its alloys and its composites, which include, but are not limited to, the various processing routes and characterization techniques in both macro- and nano-levels.
Download or read book Aluminium Alloys written by Jürgen Hirsch and published by John Wiley & Sons. This book was released on 2008-11-17 with total page 2580 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aluminium is a well established modern lightweight engineering and functional material with a unique combination of specific properties like strengh, formability, durability, conductivity, corrosion resistance, etc. It is present in many intelligent solutions in established markets like building, transport, packaging, printing, and many others, in our fast moving modern society. The various aluminium alloys can be processed quite efficiently in large quantities by conventional fabrication routes, as well as in special sophisticated forms and material combinations for highly innovative high–tec solutions and applications. This book contains latest information about all these aspects in form of the refereed papers of the II th International Conference on Aluminium Alloys "ICAA", where world–wide experts from academia and engineers from industry present latest results and new ideas in fundamental as well as applied research. Since 22 years the ICAA series provides scientists and engineers with a complete overview over the latest scientific and technological developments, featuring profound technology–based overviews and new innovative perspectives. This book is a reference for the scientific community as well as for the aluminium industry working on aluminium alloy development, processing and application issues. It gives a global perspective on the current focus of international research with emphasis on in–depth understanding of specific properties and applications of conventional and advanced aluminium alloys.
Download or read book Handbook of Aluminum written by George E. Totten and published by CRC Press. This book was released on 2003-03-27 with total page 1318 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Aluminum: Vol. 1: Physical Metallurgy and Processes covers all aspects of the physical metallurgy, analytical techniques, and processing of aluminium, including hardening, annealing, aging, property prediction, corrosion, residual stress and distortion, welding, casting, forging, molten metal processing, machining, rolling, and extrusion. It also features an extensive, chapter-length consideration of quenching.
Download or read book Thermo Mechanical Processing of Metallic Materials written by Bert Verlinden and published by Elsevier. This book was released on 2007-06-07 with total page 551 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thermo-Mechanical Processing of Metallic Materials describes the science and technology behind modern thermo-mechanical processing (TMP), including detailed descriptions of successful examples of its application in the industry. This graduate-level introductory resource aims to fill the gap between two scientific approaches and illustrate their successful linkage by the use of suitable modern case studies. The book is divided into three key sections focusing on the basics of metallic materials processing. The first section covers the microstructural science base of the subject, including the microstructure determined mechanical properties of metals. The second section deals with the current mechanical technology of plastic forming of metals. The concluding section demonstrates the interaction of the first two disciplines in a series of case studies of successful current TMP processing and looks ahead to possible new developments in the field. This text is designed for use by graduate students coming into the field, for a graduate course textbook, and for Materials and Mechanical Engineers working in this area in the industry. * Covers both physical metallurgy and metals processing* Links basic science to real everyday applications* Written by four internationally-known experts in the field
Download or read book Recent Developments in Mechanics and Design written by D. K. Singh and published by Springer Nature. This book was released on with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
