Download or read book Industry 4 0 China 2025 IoT written by Wolfgang Babel and published by Springer Nature. This book was released on 2022-11-02 with total page 437 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book gives an overview about automation technology over the last 50 years, based on my own experiences. It is a good summery for automation since 1970 for all who want to know about the context of automation developments and their standards. It is a fundamental summery and enables the reader to get experience in the complex field of automation. In detail the question is arised, whether Industry 4.0, China 2025, IoT, AI are a revolution or more an evolution of timewise established availbale technologies in HW, SW and algorithms. Is the hype about Industry 4.0 justified or not? In that context a timelline since 1970 ist shown for AI, ANN, essential milestones in automation, e.g OSI-model, automation pyramid, standards for bus systems, main SW-languages, robots, AI, ANN, pattern recognittion, Ethernet, the 12 most important international field busses, their main features and characterisitcs, foundation of committees, harmonization and standardization efforts, OPC UA and cloud computing, field devices, PLCs, SCADA, MES, ERP and automation history. All that history is seen in the context of μ-controller, DSP (Digital signal processor), FPGAs (Field Programmable Gate Arrays), ASICs (Application-Specific Integrated Circuit) , Chip on Board. It is include the HW-history, from Intel 8080 to octuple multicore processors. In the same way it is shown the history of field device out from laboratory into the field with all difficulties and benefits of that transition. The issues are summerized in a pyramid of complexity. Requirements for robustness and safety are shown for field devices. In the same way it is shown the development of mainframes, workstations and PC’s. SAP a leading ERP System is explained in mor detail. Specially it is figured out how SAP works and what has to be considered in working with such kind of system. The differences between MES- and ERP-systems are discussed, specially also for future combined SAP/MES systems. Explained are the problems of middlesized companies (SMEs) in dealing with Industry 4.0 and automation. Further examples are given and discussed for automized quality control in automotvie, PCB-handling, CIGS (Solar cell)-production. Also shown is the upgrade for older products and make them ready for automation standards. In detail the history oft he modern robotics is shown for the automotive industry. In summery also is figured out the Industry 5.0 which is just coming up more and more.
Download or read book The Internet of Things written by Ulrich Sendler and published by Springer. This book was released on 2017-11-16 with total page 278 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrie 4.0 and the Internet of Things have been positioned on the international stage as important initiatives of a promising future: Who is dealing in data from the digital factory? Germany has its “Plattform Industrie 4.0”, China “Made in China 2025” and the USA the “Industrial Internet Consortium”. Who is leading the fourth industrial revolution? The digitalization of industry is changing the global economy and society. Technology is supplying the opportunities to do so. Humans must decide just how far artificial intelligence should go, and what machines should learn – to create new and improved work instead of fewer jobs. In addition to Ulrich Sendler and eight German industry and research experts, the CEO of Xinhuanet in Beijing has also contributed to this book.
Download or read book New Industry 4 0 Advances in Industrial IoT and Visual Computing for Manufacturing Processes written by Luis Norberto López de Lacalle and published by MDPI. This book was released on 2020-03-18 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern factories are experiencing rapid digital transformation supported by emerging technologies, such as the Industrial Internet of things (IIOT), industrial big data and cloud technologies, deep learning and deep analytics, AI, intelligent robotics, cyber-physical systems and digital twins, complemented by visual computing (including new forms of artificial vision with machine learning, novel HMI, simulation, and visualization). This is evident in the global trend of Industry 4.0. The impact of these technologies is clear in the context of high-performance manufacturing. Important improvements can be achieved in productivity, systems reliability, quality verification, etc. Manufacturing processes, based on advanced mechanical principles, are enhanced by big data analytics on industrial sensor data. In current machine tools and systems, complex sensors gather useful data, which is captured, stored, and processed with edge, fog, or cloud computing. These processes improve with digital monitoring, visual data analytics, AI, and computer vision to achieve a more productive and reliable smart factory. New value chains are also emerging from these technological changes. This book addresses these topics, including contributions deployed in production, as well as general aspects of Industry 4.0.
Download or read book Advanced IoT Technologies and Applications in the Industry 4 0 Digital Economy written by Alex Khang and published by CRC Press. This book was released on 2024-02-27 with total page 411 pages. Available in PDF, EPUB and Kindle. Book excerpt: The application of internet of things (IoT) technologies and artificial intelligence (AI)-enabled IoT solutions has gradually become accepted by business and production organizations as an effective tool for automating several activities effectively and efficiently and developing and distributing products to the global market. Within this book, the reader will learn how to implement IoT devices, IoT-equipped machines, and AI-equipped IoT applications using models and methodologies along with an array of case studies. Advanced IoT Technologies and Applications in the Industry 4.0 Digital Economy covers the basics of IoT-equipped machines in developing and managing various activities in many industries. It discusses all of the key points of an AI-enabled IoT solution, which includes predictive analytics, robotic process automation, predictive maintenance, automated processes, IoT technologies and IoT-equipped sensors related to machines and processes, production testing systems, and product assessment processes in the production environment. The book presents the concepts and interactive methods using datasets, processing workflow charts, and architectural diagrams along with additional real-time systems for easy and fast understanding of the application of IoT-equipped machines and AI-enabled solutions in organizations and includes many case studies throughout the book to enforce reader comprehension. This book is an ideal read for industry specialists, practitioners, researchers, scientists, and engineers working or involved in the fields of Robotics, IT, Computer Science, Soft Computing, IoT, AL/ML/DL, Data Science, the Semantic Web, Knowledge Engineering, and other related fields.
Download or read book AI Driven IoT Systems for Industry 4 0 written by Deepa Jose and published by CRC Press. This book was released on 2024-07-30 with total page 419 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to discuss the trends and key drivers of Internet of Things (IoT) and artificial intelligence (AI) for automation in Industry 4.0. IoT and AI are transforming the industry thus accelerating efficiency and forging a more reliable automated enterprise. AI-driven IoT systems for Industry 4.0 explore current research to be carried out in the cutting-edge areas of AI for advanced analytics, integration of industrial IoT (IIoT) solutions and Edge components, automation in cyber-physical systems, world leading Industry 4.0 frameworks and adaptive supply chains, etc. A thorough exploration of Industry 4.0 is provided, focusing on the challenges of digital transformation and automation. It covers digital connectivity, sensors, and the integration of intelligent thinking and data science. Emphasizing the significance of AI, the chapter delves into optimal decision-making in Industry 4.0. It extensively examines automation and hybrid edge computing architecture, highlighting their applications. The narrative then shifts to IIoT and edge AI, exploring their convergence and the use of edge AI for visual insights in smart factories. The book concludes by discussing the role of AI in constructing digital twins, speeding up product development lifecycles, and offering insights for decision-making in smart factories. Throughout, the emphasis remains on the transformative impact of deep learning and AI in automating and accelerating manufacturing processes within the context of Industry 4.0. This book is intended for undergraduates, postgraduates, academicians, researchers, and industry professionals in industrial and computer engineering.
Download or read book The Fourth Industrial Revolution written by Klaus Schwab and published by Currency. This book was released on 2017-01-03 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt: World-renowned economist Klaus Schwab, Founder and Executive Chairman of the World Economic Forum, explains that we have an opportunity to shape the fourth industrial revolution, which will fundamentally alter how we live and work. Schwab argues that this revolution is different in scale, scope and complexity from any that have come before. Characterized by a range of new technologies that are fusing the physical, digital and biological worlds, the developments are affecting all disciplines, economies, industries and governments, and even challenging ideas about what it means to be human. Artificial intelligence is already all around us, from supercomputers, drones and virtual assistants to 3D printing, DNA sequencing, smart thermostats, wearable sensors and microchips smaller than a grain of sand. But this is just the beginning: nanomaterials 200 times stronger than steel and a million times thinner than a strand of hair and the first transplant of a 3D printed liver are already in development. Imagine “smart factories” in which global systems of manufacturing are coordinated virtually, or implantable mobile phones made of biosynthetic materials. The fourth industrial revolution, says Schwab, is more significant, and its ramifications more profound, than in any prior period of human history. He outlines the key technologies driving this revolution and discusses the major impacts expected on government, business, civil society and individuals. Schwab also offers bold ideas on how to harness these changes and shape a better future—one in which technology empowers people rather than replaces them; progress serves society rather than disrupts it; and in which innovators respect moral and ethical boundaries rather than cross them. We all have the opportunity to contribute to developing new frameworks that advance progress.
Download or read book Implementing Industry 4 0 written by Carlos Toro and published by Springer Nature. This book was released on 2021-04-03 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book relates research being implemented in three main research areas: secure connectivity and intelligent systems, real-time analytics and manufacturing knowledge and virtual manufacturing. Manufacturing SMEs and MNCs want to see how Industry 4.0 is implemented. On the other hand, groundbreaking research on this topic is constantly growing. For the aforesaid reason, the Singapore Agency for Science, Technology and Research (A*STAR), has created the model factory initiative. In the model factory, manufacturers, technology providers and the broader industry can (i) learn how I4.0 technologies are implemented on real-world manufacturing use-cases, (ii) test process improvements enabled by such technologies at the model factory facility, without disrupting their own operations, (iii) co-develop technology solutions and (iv) support the adoption of solutions at their everyday industrial operation. The book constitutes a clear base ground not only for inspiration of researchers, but also for companies who will want to adopt smart manufacturing approaches coming from Industry 4.0 in their pathway to digitization.
Download or read book Cloud Analytics for Industry 4 0 written by Sirisha Potluri and published by Walter de Gruyter GmbH & Co KG. This book was released on 2022-10-03 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides research on the state-of-the-art methods for data management in the fourth industrial revolution, with particular focus on cloud.based data analytics for digital manufacturing infrastructures. Innovative techniques and methods for secure, flexible and profi table cloud manufacturing will be gathered to present advanced and specialized research in the selected area.
Download or read book Industry 4 0 Technologies for Business Excellence written by Shivani Bali and published by CRC Press. This book was released on 2021-12-31 with total page 267 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book captures deploying Industry 4.0 technologies for business excellence and moving towards Society 5.0. It addresses applications of Industry 4.0 in the areas of marketing, operations, supply chain, finance, and HR to achieve business excellence. Industry 4.0 Technologies for Business Excellence: Frameworks, Practices, and Applications focuses on the use of AI in management across different sectors. It explores the benefits through a human-centered approach to resolving social problems by integrating cyberspace and physical space. It discusses the framework for moving towards Society 5.0 and keeping a balance between economic and social gains. This book brings together researchers, developers, practitioners, and users interested in exploring new ideas, techniques, and tools and exchanging their experiences to provide the most recent information on Industry 4.0 applications in the field of business excellence. Graduate or postgraduate students, professionals, and researchers in the fields of operations management, manufacturing, healthcare, supply chain, marketing, finance, and HR will find this book full of new ideas, techniques, and tools related to Industry 4.0.
Download or read book The New Digital Workplace written by Kendra Briken and published by Bloomsbury Publishing. This book was released on 2017-03-30 with total page 361 pages. Available in PDF, EPUB and Kindle. Book excerpt: With contributions from over 20 leading scholars from across the globe, this new book brings together a number of papers that have been presented at the annual International Labour Process Conference, at which the conference theme 'Working Revolutions: Revolutionising Work' provided the inspiration for many of the chapters included in this volume. Grounded in Labour Process Theory, the text examines how digital technologies impact on work and organisations and provides a rigorous account of the technological, organizational and work related changes in both the new digital industries and in the traditional service and manufacturing sectors. The book covers many of the most significant contemporary issues and subjects in the field, including the representation of women in IT, workplace cyberbulling, virtualisation and the video games industry. This book is essential reading for upper-level undergraduate and postgraduate students studying modules related to technology and work, as well as modules in work sociology on sociology degree programmes.
Download or read book Global Initiatives and Higher Education in the Fourth Industrial Revolution written by Erna Oliver and published by UJ Press. This book was released on 2022-11-08 with total page 244 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Fourth industrial Revolution (4IR) is forcing higher education (HE) into a new era where it must either actively and positively contribute to innovation, sustainability, and development or become obsolete and redundant. HE must leave its ivory tower and forge links and partnerships with society, industry, and governing bodies by delivering graduates that are holistically educated and trained to bring positive innovation and change and to address the challenges that humanity is facing in the 21st century.
Download or read book Cognitive Assistant Supported Human Robot Collaboration written by Cecilio Angulo and published by Elsevier. This book was released on 2024-05-29 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cognitive Assistant Supported Human-Robot Collaboration covers the design and development of cognitive assistants in the smart factory era, its application domains, challenges, and current state of the art in assistance systems with collaborative robotics and IoT technologies, standards, platforms, and solutions. This book also provides a sociotechnical view of collaborative work in human-robot teams, investigating specific methods and techniques to analyze assistance systems. This will provide readers with a comprehensive overview of how cognitive assistants function and work in human-robot teams. Introduces fundamental concepts of cognitive assistants and human-robot collaboration Investigates the optimization capabilities of human-cyber physical systems Discusses planning and implementation of cognitive assistant projects Explores concepts and design elements of human collaborative workspaces
Download or read book Critical Issues Impacting Science Technology Society STS and Our Future written by Lum, Heather Christina and published by IGI Global. This book was released on 2019-02-15 with total page 345 pages. Available in PDF, EPUB and Kindle. Book excerpt: We are in an ever-changing and fast-paced world that is entrenched in technological innovation. But how is technology and science impacting our society? How does it affect our interactions with these products and ultimately with each other? How is society shaping the types of technologies we are advancing? Critical Issues Impacting Science, Technology, Society (STS), and Our Future compiles theory and research from the confluence of a variety of disciplines to discuss how scientific research and technological innovation is shaping society, politics, and culture, and predicts what can be expected in the future. While highlighting topics including political engagement, artificial intelligence, and wearable technology, this book is ideally designed for policymakers, government officials, business managers, computer engineers, IT specialists, scientists, and professionals and researchers in the science, technology, and humanities fields.
Download or read book Smart Manufacturing written by Anthony Tarantino and published by John Wiley & Sons. This book was released on 2022-05-10 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore the dramatic changes brought on by the new manufacturing technologies of Industry 4.0 In Smart Manufacturing, The Lean Six Sigma Way, Dr. Anthony Tarantino delivers an insightful and eye-opening exploration of the ways the Fourth Industrial Revolution is dramatically changing the way we manufacture products across the world and especially how it will revitalize manufacturing in North America and Europe. The author examines the role and impact of a variety of new Smart technologies including industrial IoT, computer vision, mobile/edge computing, 3D printing, robots, big data analytics, and the cloud. He demonstrates how to apply these new technologies to over 20 continuous improvement/Lean Six Sigma tools, greatly enhancing their effectiveness and ease of use. The book also discusses the role Smart technologies will play in improving: Career opportunities for women in manufacturing Cyber security, supply chain risk, and logistics resiliency Workplace health, safety, and security Life on the manufacturing floor Operational efficiencies and customer satisfaction Perfect for anyone involved in the manufacturing or distribution of products in the 21st century, Smart Manufacturing, The Lean Six Sigma Way belongs in the libraries of anyone interested in the intersection of technology, commerce, and physical manufacturing.
Download or read book A Roadmap to Industry 4 0 Smart Production Sharp Business and Sustainable Development written by Anand Nayyar and published by Springer Nature. This book was released on 2019-11-27 with total page 205 pages. Available in PDF, EPUB and Kindle. Book excerpt: Business innovation and industrial intelligence are paving the way for a future in which smart factories, intelligent machines, networked processes and Big Data are combined to foster industrial growth. The maturity and growth of instrumentation, monitoring and automation as key technology drivers support Industry 4.0 as a viable, competent and actionable business model. This book offers a primer, helping readers understand this paradigm shift from industry 1.0 to industry 4.0. The focus is on grasping the necessary pre-conditions, development & technological aspects that conceptually describe this transformation, along with the practices, models and real-time experience needed to achieve sustainable smart manufacturing technologies. The primary goal is to address significant questions of what, how and why in this context, such as:What is Industry 4.0?What is the current status of its implementation?What are the pillars of Industry 4.0?How can Industry 4.0 be effectively implemented?How are firms exploiting the Internet of Things (IoT), Big Data and other emerging technologies to improve their production and services?How can the implementation of Industry 4.0 be accelerated?How is Industry 4.0 changing the workplace landscape?Why is this melding of the virtual and physical world needed for smart production engineering environments?Why is smart production a game-changing new form of product design and manufacturing?
Download or read book Advanced Manufacturing and Automation VII written by Kesheng Wang and published by Springer. This book was released on 2018-02-10 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proceedings brings together a selection of papers from the 7th International Workshop of Advanced Manufacturing and Automation (IWAMA 2017), held in Changshu Institute of Technology, Changshu, China on September 11–12, 2017. Most of the topics are focusing on novel techniques for manufacturing and automation in Industry 4.0. These contributions are vital for maintaining and improving economic development and quality of life. The proceeding will assist academic researchers and industrial engineers to implement the concepts and theories of Industry 4.0 in industrial practice, in order to effectively respond to the challenges posed by the 4th industrial revolution and smart factories.
Download or read book Immersive Technology in Smart Cities written by Sagaya Aurelia and published by Springer Nature. This book was released on 2021-07-07 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents recent trends and enhancements in the convergence of immersive technology and smart cities. The authors discuss various domains such as medical education, construction, brain interface, interactive storytelling, edification, and journalism in relation to combining smart cities, IoT and immersive technologies. The book sets up a medium to promulgate insights and in depth understanding among experts in immersive technologies, IoT, HCI and associated establishments. The book also includes case studies, survey, models, algorithms, frameworks and implementations in storytelling, smart museum, medical education, journalism and more. Various practitioners, academicians and researchers in the domain contribute to the book.
