Download or read book General Desk Book written by United States. Office of Price Administration and published by . This book was released on 1944 with total page 2268 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Production Chemicals for the Oil and Gas Industry Second Edition written by Malcolm A. Kelland and published by CRC Press. This book was released on 2014-03-13 with total page 456 pages. Available in PDF, EPUB and Kindle. Book excerpt: Production chemistry issues result from changes in well stream fluids, both liquid and gaseous, during processing. Since crude oil production is characterized by variable production rates and unpredictable changes to the nature of the produced fluids, it is essential for production chemists to have a range of chemical additives available for rectifying issues that would not otherwise be fully resolved. Modern production methods, the need to upgrade crude oils of variable quality, and environmental constraints demand chemical solutions. Thus, oilfield production chemicals are necessary to overcome or minimize the effects of the production chemistry problems. Production Chemicals for the Oil and Gas Industry, Second Edition discusses a wide variety of production chemicals used by the oil and gas industry for down-hole and topside applications both onshore and offshore. Incorporating the large amount of research and applications since the first edition, this new edition reviews all past and present classes of production chemicals, providing numerous difficult-to-obtain references, especially SPE papers and patents. Unlike other texts that focus on how products perform in the field, this book focuses on the specific structures of chemicals that are known to deliver the required or desired performance—information that is very useful for research and development. Each updated chapter begins by introducing a problem, such as scale or corrosion, for which there is a production chemical. The author then briefly discusses all chemical and nonchemical methods to treat the problem and provides in-depth descriptions of the structural classes of relevant production chemicals. He also mentions, when available, the environmental properties of chemicals and whether the chemical or technique has been successfully used in the field. This edition includes two new chapters and nearly 50 percent more references.

Download or read book Select Start Your Own Industry 3Rd Edition written by Niir Board and published by National Institute of Industrial Re. This book was released on 2004-10-01 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains more than 4500 projects with their installed capacities, cost of projects, rate of return etc. This is very helpful book for those who want to diversify or start new industry.

Download or read book Chemistry of Natural Products written by Sujata V. Bhat and published by Springer Science & Business Media. This book was released on 2005-01-04 with total page 886 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the last few decades, research into natural products has advanced tremendously thanks to contributions from the fields of chemistry, life sciences, food science and material sciences. Comparisons of natural products from microorganisms, lower eukaryotes, animals, higher plants and marine organisms are now well documented. This book provides an easy-to-read overview of natural products. It includes twelve chapters covering most of the aspects of natural products chemistry. Each chapter covers general introduction, nomenclature, occurrence, isolation, detection, structure elucidation both by degradation and spectroscopic techniques, biosynthesis, synthesis, biological activity and commercial applications, if any, of the compounds mentioned in each topic. Therefore it will be useful for students, other researchers and industry. The introduction to each chapter is brief and attempts only to supply general knowledge in the particular field. Furthermore, at the end of each chapter there is a list of recommended books for additional study and a list of relevant questions for practice.

Download or read book Sculpture and Psychoanalysis written by Brandon Taylor and published by Ashgate Publishing, Ltd.. This book was released on 2006 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Shows how key metaphors of Freudian and Kleinian psychoanalysis - splitting, projection, sublimation, identification, the schizoid and reparative mechanisms - as well as Lacan's concepts of the stade du mirroir and the objet petit, can be fruitfully applied to a range of modern three-dimensional art.

Download or read book History of Soybeans and Soyfoods in the United Kingdom and Ireland 1613 2015 written by William Shurtleff; Akiko Aoyagi and published by Soyinfo Center. This book was released on 2015-06-14 with total page 1726 pages. Available in PDF, EPUB and Kindle. Book excerpt: The world's most comprehensive, well documented, and well illustrated book on this subject. With extensive index. 333 color photographs and illustrations. Free of charge in digital PDF format on Google Books.

Download or read book Natural and Synthetic Waxes written by Ernst Krendlinger and published by John Wiley & Sons. This book was released on 2023-01-10 with total page 709 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and Synthetic Waxes A compilation of all relevant information for the production and use of waxes in technical applications Waxes are among the oldest organic substances used by mankind. Before all others, beeswax is known to have played a role in human history for thousands of years. But over time, many other wax species have been detected and exploited, and prepared for different utilizations. Today, we possess knowledge of a great variety of different types of waxes. Unfortunately, there still is no broadly accepted definition of a wax: for the relatively few wax chemists, waxes are usually defined by their physico-chemical properties more than by their chemical constitution. Waxes are not uniform but oligomeric and polymeric substances, not simply describable with a chemical formula. The realm of waxes encompasses fully or partly natural, refined, partly or fully synthetic products, which can be extended by “wax-like” products which do not fulfil all definition criteria. Waxes are offered in different forms like pellets, granules, powders, or micropowders. Their number of technical applications runs into thousands. However, waxes in most cases are just adjuvants or additives, and with few exceptions like candles not known to a broader public. Only few publications over the last decades tried to present a more comprehensive overview of heir chemistry, chemical composition, their physical and analytical properties, their applications, and their sometimes astonishing history. Based on personal experience and expertise, the authors intend to present an overview on the main classes of waxes, their origin, history, future, and potential fate. Economical aspects like market size and development, ecological impacts and challenges, and regulatory issues are also addressed. Waxes are indispensable products in everyday life and in industry and technology, though mostly not even visible or distinguishable to experts. They deserve more than the role of a “poor cousin” in chemistry and technology.

Download or read book Honey Bees Beekeeping and Bee Products written by Aijaz Ahmad Wachkoo and published by CRC Press. This book was released on 2024-03-14 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: Honey bees are social insects; they live together in large, well-organized family groups comprising three castes: queen (fertile female), workers (sterile females) and drones (males). During honey flow season, there is a considerable increase in the foraging activity of the workers and in the rate of egg laying by the queen. Sex determination in honey bees involves a multi-allelic locus, such that homozygotes develop as males and heterozygotes as females, whereas diet quality influences the caste determination in honey bees. Like all living organisms, honey bees can be infested with diseases and pests. Some of these are more deleterious to bee colonies than others, but it is important for the beekeeper to be able to recognize conditions that might be disease or pest-related and respond accordingly so as to improve the quality of honey and honey bee by-products. The best-known primary products of beekeeping are honey and wax, but pollen, propolis, royal jelly, venom, queens, bees and their larvae are also marketable primary bee products. The purpose of this book is to make available information on bee biology and beekeeping as well as to provide comprehensive information on manufacturing, processing and marketing of value-added bee products. This book has been designed as a useful tool for the many diverse professionals who characterize and market honey bee products, including beekeepers, non-beekeepers, small entrepreneurs, extension officers and those involved in small business development. This edited book will be the first of its kind to contain comprehensive information on both bees and bee products. Key Features: Contains comprehensive information on beekeeping. Discusses the recent advances in beekeeping. Sheds light on bee colony integration and organization. Contains brief information on honey bee products.

Download or read book Journal of the Society of Chemical Industry written by Society of Chemical Industry (Great Britain) and published by . This book was released on 1913 with total page 1454 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book CRC Handbook of Tables for Applied Engineering Science written by Ray E. Bolz and published by CRC Press. This book was released on 2019-03-07 with total page 1184 pages. Available in PDF, EPUB and Kindle. Book excerpt: New tables in this edition cover lasers, radiation, cryogenics, ultra-sonics, semi-conductors, high-vacuum techniques, eutectic alloys, and organic and inorganic surface coating. Another major addition is expansion of the sections on engineering materials and compos-ites, with detailed indexing by name, class and usage. The special Index of Properties allows ready comparisons with respect to single property, whether physical, chemical, electrical, radiant, mechani-cal, or thermal. The user of this book is assisted by a comprehensive index, by cross references and by numerically keyed subject headings at the top of each page. Each table is self-explanatory, with units, abbreviations, and symbols clearly defined and tabular material subdivided for easy reading.

Download or read book Textile World and Industrial Record written by and published by . This book was released on 1923 with total page 1048 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Handbook on Agro Based Industries 2nd Revised Edition written by NPCS Board and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2012-10-01 with total page 182 pages. Available in PDF, EPUB and Kindle. Book excerpt: (LIMITED EDITION- ONLY PHOTOSTAT COPY AVAILABLE) The agro industry is regarded as an extended arm of agriculture. The development of the agro industry can help stabilise and make agriculture more lucrative and create employment opportunities both at the production and marketing stages. The broad based development of the agro products industry will improve both the social and physical infrastructure of India. India is one of the largest producers of food, and is the second largest producer of rice, wheat, fruits, and vegetables in the world. Nearly 70% of the population depend on agriculture and agro-based industries. Since it would cause diversification and commercialization of agriculture, it will thus enhance the incomes of farmers and create food surpluses. The agro industry mainly comprises of the post harvest activities of processing and preserving agricultural products for intermediate or final consumption. It is a well recognized fact across the world, particularly in the context of industrial development that the importance of agro industries is relative to agriculture increases as economies develop. It should be emphasized that food is not just produce. Food also encompasses a wide variety of processed products. It is in this sense that the agro-industry is an important and vital part of the manufacturing sector in developing countries and the means for building industrial capacities. Some of the fundamentals of the book are Aloe Vera juice, gel and powder, Coconut oil, Banana Powder, Charcoal from rice husk, Disposal plates from banana leaves, Drumstick powder, Ginger products, Mango pickles etc. A complete hand book covering most profitable agro based industries and contains profile on each industry has been presented with great efforts & care.

Download or read book Lubricant Base Oil and Wax Processing written by Avilino Sequeira and published by CRC Press. This book was released on 1994-08-09 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Provides state-of-the-art information on all processes currently used to manufacture lubricant base oils and waxes-offering practical, timesaving solutions for specific on-the-job problems. Furnishes helpful lists of conversion factors, construction cost data, and process licensors, as well as a glossary of essential petroleum processing terms.

Download or read book National Agricultural Library Catalog written by National Agricultural Library (U.S.) and published by . This book was released on 1975 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Additive Manufacturing Second Edition written by Amit Bandyopadhyay and published by CRC Press. This book was released on 2019-10-16 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: The field of additive manufacturing is growing dynamically as the interest is persisting from manufacturing sector, including other sectors as well. Conceptually, additive manufacturing is a way to build parts without using any part-specific tooling or dies from the computer-aided design (CAD) file of the part. Second edition of Additive Manufacturing highlights the latest advancements in the field, taking an application oriented approach. It includes new material on traditional polymer based rapid prototyping technologies, additive manufacturing of metals and alloys including related design issues. Each chapter comes with suggested reading, questions for instructors and PowerPoint slides.

Download or read book The Complete Technology Book on Wax and Polishes Formulae Manufacturing Processes with Machinery Equipment Details 2nd Edition written by P. K. Chattopadhyay and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2021-01-01 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: A wax is a simple lipid that is formed by the esterification of a long-chain alcohol and a fatty acid. The alcohol might have anything from 12 to 32 carbon atoms. Waxes are found as coats on leaves and stems in nature. The wax helps to keep the plant from losing too much water. Waxes are utilized in a variety of applications around the world, including packaging, coatings, cosmetics, foods, adhesives, inks, castings, crayons, chewing gum, polishes, and candles. Waxing and polishing serve very distinct purposes in terms of process detailing. Waxing is a method of protecting the paint on the exterior of a vehicle. However, Polishing is what is done after a wax to ensure that the vehicle has that glossy shine. Wax does this by smoothing out the painted surface by filling swirls and scratches with a protective coating. The worldwide wax market is growing at a rate of 2.8 percent per year. Over the forecast period, rising demand for wax in various applications such as candles, packaging, rubber & plastic processing, cosmetics & toiletries, fire logs, adhesives, building boards, medicines, and home & automotive polishes is expected to drive market expansion. The market for furniture polish is growing at a rate of 5.0 percent per year. Furniture polish is in high demand due to rising need for harm-resistant business and residential settings, increased furniture exports, and increased furniture production. This will propel the global furniture polish market forward. Increased disposable income, as well as government investments in infrastructure development. The major contents of the book are Vegetable Waxes, Paraffin Wax Compounds, Synthetic Mineral Waxes, Other Mineral Waxes, Polish, Abrasives, Metal Cleaners, Polishes, Microcrystalline Waxes, Photographs of Machinery with Suppliers Contact Details and Plant Layout & Process Flow Chart. A comprehensive reference to the Wax and Polishes industry's manufacturing and business success. This book serves as a one-stop shop for information on the Wax and Polishes business, which offers several prospects for producers, retailers, and entrepreneurs. This is the only book that covers the entire information of commercial wax and polish manufacture. It provides a feast of how-to knowledge, from concept through equipment purchase.

Download or read book Handbook on Automobile Allied Products 2nd Revised Edition written by NPCS board and published by NIIR PROJECT CONSULTANCY SERVICES. This book was released on 2013-10-01 with total page 187 pages. Available in PDF, EPUB and Kindle. Book excerpt: (LIMITED EDITION- ONLY PHOTOSTAT COPY AVAILABLE) Accessories & Spares Manufacturing Plant, Auto Body Parts, Auto components industry, Auto Components, Auto Industry in India, Auto Parts Business Opportunities, Auto parts business start up, Auto parts making machine factory, Auto parts making Small Business Manufacturing, Auto parts manufacturing Business, Auto Parts, Auto spare parts business plan, Automobile Based Profitable Projects, Automobile Based Small Scale Industries Projects, Automobile business ideas in India, Automobile Components & Allied Products, Automobile Industry in India, Automobile industry Technology book, Automobile Industry, Automobile manufacturing Industry in India, Automobile Parts and Spares Business, Automobile Processing Projects, Automobile spare parts business plan, Automobile spare parts business, Automotive Components, Best Automotive Business Opportunities & ideas, Best automotive business to start, Best small and cottage scale industries, Book on Production of Automobile Components, Business consultancy, Business consultant, Business guidance to clients, Business guidance for automobile industry, Business Plan for a Startup Business, Business start-up, Car Parts, Forging technology of automobile parts, Great Opportunity for Startup, Highly Profitable Automobile Business Ideas, How to start a successful automobile business, How to Start a Used Auto Parts Business, How to Start an Auto Parts Store Small Business, How to start an automobile components business?, How to start auto parts Production Business, How to start automobile business, How to start automobile Industry in India, How to start automobile spare parts business in India, Indian Automobile Industry, Manufacturing of Auto Locks, Manufacturing of Auto Piston, Manufacturing of Automobile Chain, Manufacturing of automobile chassis, Manufacturing of Automobile Control Cable, Manufacturing of Automobile Silencer, Manufacturing of Cylinder Block, Manufacturing of Cylinder Linear, Manufacturing of engine parts, Manufacturing of Lead Storage Battery, Manufacturing of Pins for Automobiles, Manufacturing of Piston Ring, Manufacturing of Valve and Valve Seat, Manufacturing Process of Automobiles Tyres, Materials used in automobiles, Most Profitable automobile manufacturing Business Ideas, New small scale ideas in automobile industry, Painting technology of automobiles, Preparation of Project Profiles, Process technology books, Profitable Small Scale Auto parts Manufacturing, Project for startups, Project identification and selection, Replacement Parts, Setting up and opening your automobile Business, Small business ideas in automobile field, Small scale Auto parts production line, Small Scale Automobile Business Ideas, Small Scale automobile components manufacturing Projects, Small scale Commercial Auto parts making, Small Start-up Business Project, Spare Parts, Start Up India, Stand Up India, Starting an auto parts manufacturing Business, Start-up Business Plan for automobile industry, Startup ideas, Startup Project for automobile components industry, Technology for automobiles, Three Wheeler and Four Wheeler Parts, Tractor Parts, Motorcycle Parts, Two Wheeler, Use of aluminium in automobiles, Use of plastics in automobiles, Ways to Jump-Start the Auto Business