Download or read book Waste Reduction for Pollution Prevention written by P. N. Cheremisinoff and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Reduction for Pollution Prevention discusses the philosophy, regulatory background, and technical options dealing with waste minimization. The book explains waste reduction as a form of pollution prevention to minimize the amount of hazardous materials dumped into the environment. The 1984 Resource Conservation and Recovery Act amendments restrict the amount of waste that can be disposed on land. The approach of the United States is to address pollution after the problem has been created, where attention and resources of industry shift to regulatory compliance. The text notes that waste reduction is the key to preventing future hazardous waste problems. Examples of techniques of waste minimization are good housekeeping, changes in technology and procedures, raw material substitution, recycling, and waste exchanges. The book discusses the biological, thermal, and other emerging thermal processes for industrial waste management, as well as municipal solid-waste recycling, and the organization of a recycling program. The text can benefit economists, environmentalists, urban developers, and policy makers involved in waste management, community preservation and development.

Download or read book Industrial Waste Management written by Rose Marie O. Mendoza and published by Delve Publishing. This book was released on 2018-12 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Waste Management studies various aspects of waste management including an extensive overview of industrial waste management and related issues. It includes definitions of waste management, industrial wastes etc. Provides the reader with insights of industrial waste management so as to develop strategies which can further help in efficient management of industrial waste.

Download or read book Handbook of Sustainable Concrete and Industrial Waste Management written by Francesco Colangelo and published by Woodhead Publishing. This book was released on 2021-12-01 with total page 730 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Handbook of Sustainable Concrete and Industrial Waste Management summarizes key research trends in recycling and reusing concrete and industrial waste to reduce their environmental impact. This volume also includes important contributions in collaboration with the CRI-TEST Innovation Lab, Naples – Acerra. Part one discusses eco-friendly innovative cement and concrete and reviews key substitute materials. Part two analyzes the use of industrial waste as aggregates and the mechanical properties of concrete containing waste materials. Part three discusses differences between innovative binders, focusing on alkali-activated and geopolymer concrete. Part four provides a thorough overview of the life cycle assessment (LCA) of concrete containing industrial wastes and the impacts related to the logistics of wastes, the production of the concrete, and the management of industrial wastes. By providing research examples, case studies, and practical strategies, this book is a state-of-the-art reference for researchers working in construction materials, civil or structural engineering, and engineers working in the industry. - Offers a systematic and comprehensive source of information on the latest developments in sustainable concrete; - Analyzes different types of sustainable concrete and innovative binders from chemical, physical, and mechanical points of view; - Includes real case studies showing application of the LCA methodology.

Download or read book Sustainable Industrial Design and Waste Management written by Salah El Haggar and published by Academic Press. This book was released on 2010-07-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Industrial Design and Waste Management was inspired by the need to have a text that enveloped awareness and solutions to the ongoing issues and concerns of waste generated from industry. The development of science and technology has increased human capacity to extract resources from nature and it is only recently that industries are being held accountable for the detrimental effects the waste they produce has on the environment. Increased governmental research, regulation and corporate accountability are digging up issues pertaining to pollution control and waste treatment and environmental protection. The traditional approach for clinical waste, agricultural waste, industrial waste, and municipal waste are depleting our natural resources. The main objective of this book is to conserve the natural resources by approaching 100 % full utilization of all types of wastes by cradle – to - cradle concepts, using Industrial Ecology methodology documented with case studies. Sustainable development and environmental protection cannot be achieved without establishing the concept of industrial ecology. The main tools necessary for establishing Industrial Ecology and sustainable development will be covered in the book. The concept of "industrial ecology will help the industrial system to be managed and operated more or less like a natural ecosystem hence causing as less damage as possible to the surrounding environment. - Numerous case studies allow the reader to adapt concepts according to personal interest/field - Reveals innovative technologies for the conservation of natural resources - The only book which provides an integrated approach for sustainable development including tools, methodology, and indicators for sustainable development

Download or read book Handbook of Research on Creating Sustainable Value in the Global Economy written by Akkucuk, Ulas and published by IGI Global. This book was released on 2019-11-15 with total page 562 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the first decade of the 21st century, the world has witnessed a plethora of corporate scandals, global economic crises, and rising environmental concerns. As a result of these developments, pressure has been mounting on businesses to pay more attention to the environmental and resource consequences of the products they produce and services they deliver. The Handbook of Research on Creating Sustainable Value in the Global Economy contains a collection of pioneering research on the integration of issues of sustainability within the traditional areas of management. While highlighting topics including green marketing, circular economy, and sustainable business, this book is ideally designed for managers, executives, environmentalists, economists, business professionals, researchers, academicians, and students in disciplines including marketing, economics, finance, operations management, communication science, and information technology.

Download or read book Waste Management Practices written by John Pichtel and published by CRC Press. This book was released on 2005-03-29 with total page 690 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical guide for the identification and management of a range of hazardous wastes, Waste Management Practices: Municipal, Hazardous, and Industrial integrates technical information including chemistry, microbiology, and engineering, with current regulations. Emphasizing basic environmental science and related technical fields, the book is an i

Download or read book Zero Pollution for Industry written by Nelson L. Nemerow and published by John Wiley & Sons. This book was released on 1995-10-06 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: A visionary approach to eliminating industrial waste streams . .. Here is a revolutionary solution to problems of industrial wastemanagement by creating a system of environmentally balanced"industrial complexes" in which groups of industrial plants consumeeach other's waste--not only benefiting the environment, but alsosignificantly reducing production costs. Providing a clear introduction to this novel approach, ZeroPollution for Industry goes right to the heart of whatenvironmental scientists, engineers, and administrators grapplewith these days. It takes pollution prevention to the next level,past current reduction and reuse methods, and anticipatesgovernment regulations and societal trends that would factorenvironmental damage into production costs. Also suitable as a companion volume for traditional industrialwaste management texts at the graduate level, thisthought-provoking book: * Covers hot new material under consideration by professionals andpolicymakers, including the EPA and the NSF * Discusses the basics of waste minimization and waste reuse aswell as zero-pollution industrial complexing * Presents detailed examples of how complexes in differentindustries could be structured * Describes how to change industrial plant design practices toprevent pollution * Teaches innovative production techniques for environmentalprotection to future engineers and administrators * Shows how to plan for a pollution-free environment from anadministrative point of view Concise and uncluttered, this book is an eye-opener for anyone whowould like to work toward a world free of industrial pollution inour fragile environment.

Download or read book Concepts of Advanced Zero Waste Tools written by Chaudhery Hussain and published by Elsevier. This book was released on 2020-12-10 with total page 274 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advanced Zero Waste Tools: Present and Emerging Waste Management Practices, Volume One in the Concepts of Advanced Zero Waste Tools series addresses the fundamental principles of zero waste that encourages the redesign of resource lifecycles so that products are reused. By promoting reuse and recycling, as well as prevention and product designs that consider the entire product lifecycle, the zero waste philosophy advocates for sustainability and environmental management and protection. This book takes the first step toward addressing the tools needed to implement zero waste, both on a practical and conceptual scale. In addition to environmental and engineering principles, the book also covers economic, toxicologic and regulatory issues, making it an important resource for researchers, engineers and policymakers working toward environmental sustainability. Uses fundamental, interdisciplinary and state-of-the-art coverage of zero waste research to provide an integrated approach to tools, methodology and indicators Covers current challenges, design and manufacturing technology, and sustainability applications Includes up-to-date references and web resources at the end of each chapter, as well as a webpage dedicated to providing supplementary information

Download or read book Industrial Waste Treatment Handbook written by Woodard & Curran, Inc and published by Butterworth-Heinemann. This book was released on 2006-01-06 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Waste Treatment Handbook provides the most reliable methodology for identifying which waste types are produced from particular industrial processes and how they can be treated. There is a thorough explanation of the fundamental mechanisms by which pollutants become dissolved or become suspended in water or air. Building on this knowledge, the reader will learn how different treatment processes work, how they can be optimized, and the most efficient method for selecting candidate treatment processes. Utilizing the most up-to-date examples from recent work at one of the leading environmental and science consulting firms, this book also illustrates approaches to solve various environmental quality problems and the step-by-step design of facilities. Practical applications to assist with the selection of appropriate treatment technology for target pollutants Includes case studies based on current work by experts in waste treatment, disposal, management, environmental law and data management Provides glossary and table of acronyms for easy reference

Download or read book Food Industry Wastes written by Maria R. Kosseva and published by Academic Press. This book was released on 2013-01-31 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Industry Wastes: Assessment and Recuperation of Commodities presents emerging techniques and opportunities for the treatment of food wastes, the reduction of water footprint, and creating sustainable food systems. Written by a team of experts from around the world, this book provides a guide for implementing bioprocessing techniques. It also helps researchers develop new options for the recuperation of these wastes for community benefit. More than 34 million tons of food waste was generated in the United States in 2009, at a cost of approximately $43 billion. And while less than three percent of that waste was recovered and recycled, there is growing interest and development in recovering and recycling food waste. These processes have the potential not only to reduce greenhouse gases, but to provide energy and resources for other purposes. This book examines these topics in detail, starting with sources, characterization and composition of food wastes, and development of green production strategies. The book then turns to treatment techniques such as solid-state fermentation and anaerobic digestion of solid food waste for biogas and fertilizer. A deep section on innovative biocatalysts and bioreactors follows, encompassing hydrogen generation and thermophilic aerobic bioprocessing technologies. Rounding out the volume are extensive sections on water footprints, including electricity generation from microbial fuel cells (MFCs), and life cycle assessments. - Food waste is an area of focus for a wide range of related industries from food science to energy and engineering - Outlines the development of green product strategies - International authoring team represents the leading edge in research and development - Highlights leading trends of current research as well as future opportunities for reusing food waste

Download or read book Waste Management for the Food Industries written by Ioannis S. Arvanitoyannis and published by Academic Press. This book was released on 2010-07-28 with total page 1096 pages. Available in PDF, EPUB and Kindle. Book excerpt: The continuously increasing human population, has resulted in a huge demand for processed and packaged foods. As a result of this demand, large amounts of water, air, electricity and fuel are consumed on a daily basis for food processing, transportation and preservation purposes. Although not one of the most heavily polluting, the food industry does contribute to the increase in volume of waste produced as well as to the energy expended to do so. For the first time, nine separate food industry categories are thoroughly investigated in Waste Management for the Food Industries in an effort to help combat this already acute problem. The current state of environmental management systems is described, offering comparisons of global legislation rarely found in other resources. An extensive review of commercial equipment, including advantages and disadvantages per employed waste management technique, offers a unique perspective for any academic, student, professional, and/or consultant in the food, agriculture and environmental industries. - Thoroughly examines the most prevalent and most polluting industries such as Meat, Fish, Dairy, Olive Oil, Juice and Wine industries - Includes synoptical tables [methods employed, physicochemical or microbiological parameters altered after treatment etc] and comparative figures of the effectiveness of various waste management methods - Contains nearly 2500 of the most up-to-date references available

Download or read book Handbook of Research on Waste Diversion and Minimization Technologies for the Industrial Sector written by Rathoure, Ashok K. and published by IGI Global. This book was released on 2021-01-08 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Due to various issues in the world including rapid urbanization and industrial processes, waste generation has reached levels that are becoming detrimental to the environment and the global population. Waste management has remained a challenging issue for many professional sectors as it is directly linked to an organization’s performance; however, the implementation of efficient and cost-effective waste minimization plans is the first step in improving the global environment. Innovative technologies in waste management are emerging and can help professionals looking to implement more efficient methods of pollution control. The Handbook of Research on Waste Diversion and Minimization Technologies for the Industrial Sector is a pivotal reference source that provides vital research on the application of modern pollution-control methodologies in industrialized environments. While highlighting topics such as life cycle assessment, bioremediation, and thermal waste treatment, this publication explores environmental risk reduction scenarios as well as sustainable waste-collecting solutions. This book is ideally designed for researchers, industrialists, environmentalists, practitioners, policymakers, scientists, students, and academicians seeking current research on innovative advancements in waste minimization techniques.

Download or read book Strategies of Industrial and Hazardous Waste Management written by Nelson L. Nemerow and published by John Wiley & Sons. This book was released on 1998-03-09 with total page 770 pages. Available in PDF, EPUB and Kindle. Book excerpt: Strategies of Industrial and Hazardous Waste Management by Nelson L. Nemerow and Frank J. Agardy For years, plant engineers, engineering professors, municipal engineers, EPA personnel, and other professionals have relied on the expertise of these authors in the area of industrial and hazardous waste management. This book is full of new ideas, methods, models, data, updated information, and new case histories. This latest classic reference from Nelson Nemerow and Frank Agardy is by far the most comprehensive and useful source available on the generation, treatment, and disposal of all significant industrial and hazardous wastes. Strategies of Industrial and Hazardous Waste Management addresses the needs of its wide-ranging audience by dividing its coverage into four parts: Part I presents the basic information the industrial waste engineer needs to know about the environmental impact of various wastes, writing environmental impact statements, protecting streams from further pollution, calculating final treatments, testing treatment efficiency, and the influence of economic factors on waste treatment decisions. Part II explores theories and designs of waste treatment, and shows how waste can be reduced through proper operation of manufacturing plants. It ranges beyond the removal of suspended and colloidal solids to include coverage of neutralization, equalization and proportioning, removal of inorganic dissolved salts, and private contract collection and treatment. Also included is a novel paradigm for obtaining zero pollution in the future through environmentally balanced industrial complexes. Part III demonstrates waste management in action, using case studies from around the world to show theories and models successfully adapted and put into practice. All cases are based on the authors' actual experiences--the cases in Chapters 17, 19, 22, 23, and 24 have never been previously published. Part IV offers concise evaluations of all major liquid Industrial wastes, including their origins, characteristics, and acceptable treatments. Industries are classified into six categories: apparel, food processing, materials, chemicals, energy, and (in significantly extended coverage) non-point practices. Included are separate considerations of radioactive and hazardous (as opposed to conventional) waste. No waste-management professional should be without this essential volume. Focused on need-to-know information, common pitfalls, and practical solutions to all kinds of problems, Strategies of Industrial and Hazardous Waste Management is an answer source unlike any other.

Download or read book Bioremediation of Industrial Waste for Environmental Safety written by Gaurav Saxena and published by Springer. This book was released on 2019-06-29 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Achieving environmental sustainability with rapid industrialization is a major challenge of current scenario worldwide. As globally evident, industries are the key economic drivers, but are also the major polluters as untreated/partially treated effluents discharged from the industries is usually thrown into the aquatic resources and also dumped unattended. Industrial effluents are considered as the major sources of environmental pollution as these contains highly toxic and hazardous pollutants, which reaches far off areas due to the medium of dispersion and thus, create ecological nuisance and health hazards in living beings. Hence, there is an urgent to find ecofriendly solution to deal with industrial waste, and develop sustainable methods for treating/detoxifying wastewater before its release into the environment. Being a low cost and eco-friendly clean technology, bioremediation can be a sustainable alternative to conventional remediation technologies for treatment and management of industrial wastes to protect public health and environment. Therefore, this book (Volume I) covers the bioremediation of different industrial wastes viz. tannery wastewater, pulp and paper mill wastewater, distillery wastewater, acid mine tailing wastes, and many more; which are lacking in a comprehensive manner in previous literature at one place. A separate chapter dedicated to major industries and type of waste produced by them is also included. This book will appeal to students, researchers, scientists, industry persons and professionals in field of microbiology, biotechnology, environmental sciences, eco-toxicology, environmental remediation and waste management and other relevant areas, who aspire to work on the biodegradation and bioremediation of industrial wastes for environmental safety.

Download or read book Source Reduction and Waste Minimization written by Mosae Selvakumar Paulraj and published by Elsevier. This book was released on 2021-08-20 with total page 200 pages. Available in PDF, EPUB and Kindle. Book excerpt: Source Reduction and Waste Minimization is the second volume in the series Advanced Zero Waste Tools: Present and Emerging Waste Management Practices. It addresses processes and practices for waste minimization to support efforts to promote a more sustainable society and provide readers with a proper understanding of the major mechanisms followed for waste minimization across fields. Despite being one of the major challenges mankind is facing to establish a sustainable society, waste minimization techniques are not broadly adopted and an organized collection of these techniques with corresponding evidence of results is not available currently. This book covers numerous mechanisms supported by scientific evidence and case studies, as well as in-depth flowcharts and process diagrams to allow for readers to adopt these processes. Summarizing the present and emerging zero waste tools on the scale of both experimental and theoretical models, Advanced Zero Waste Tools is the first step toward understanding the state-of-the-art practices in making the zero-waste goal a reality. In addition to environmental and engineering principles, it also covers economic, toxicologic, and regulatory issues, making it an important resource for researchers, engineers, and policymakers working toward environmental sustainability. - Uses fundamental, interdisciplinary, and state-of-the-art coverage of zero waste research to provide an integrated approach to tools, methodology, and indicators for waste minimization - Covers current challenges, design and manufacturing technology, and sustainability applications - Includes up-to-date references and web resources at the end of each chapter, as well as a webpage dedicated to providing supplementary information

Download or read book Handbook of Environment and Waste Management written by Yung-Tse Hung and published by World Scientific. This book was released on 2012 with total page 1256 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a compilation of topics that are at the forefront of many technical advances and practices in air and water control. These include air pollution control, water pollution control, water treatment, wastewater treatment, industrial waste treatment and small scale wastewater treatment.

Download or read book Waste Management in the Palm Oil Industry written by Phaik Eong Poh and published by Springer Nature. This book was released on 2020-01-30 with total page 81 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the technological developments that are currently being researched or implemented in the management of palm oil industrial waste. After introducing the plantation and milling processes, the book focuses on the wastes generated solely from plantation and milling activities, as reducing waste from these two sectors will enhance the overall sustainability of the entire palm oil industry eco-system. It then evaluates the sustainability of current practices and elaborates on technological developments in the two sectors, before critically assessing options to treat wastes generated from the plantation and milling process. To properly contextualise the work, it also includes a section on socio-economical sustainability, as well as an industrial case study. A valuable resource for academics interested in the evolution of sustainable waste management strategies within this industrial context, the book also appeals to practitioners in the field who wish to improve the sustainability of their particular plantation or mill.