Download or read book Pocket Guide Foundry 2019 written by Dipl.-Ing. Simone Franke and published by Fachverlag Schiele & Schoen. This book was released on 2019-06-01 with total page 688 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ongoing technical training, familiarisation with new developments and studying current research results are key components of everyday working practices. The Pocket Guide Foundry is intended to provide appropriate information and offer inspiration in addition to supporting the development of technical contacts. It is not merely a helpful complement to vocational training, studies or continuing education, but also serves as a straightforward reference for practitioners and suppliers in the foundry industry, for design engineers, production engineers and readers with technical interests.
Download or read book Radiation Protection and Safety in Industrial Radiography written by International Atomic Energy Agency and published by . This book was released on 1999 with total page 78 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Safety Report summarizes good and current state of the art practices in industrial radiography and provides technical advice on radiation protection and safety. It contains information explaining the responsibilities of regulatory authorities, operating organizations, workers, equipment manufacturers and client organizations, with the intention of enhancing radiation protection and safety.
Download or read book Mechanical Testing of Materials written by Emmanuel Gdoutos and published by Springer Nature. This book was released on 2024-01-19 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book offers a comprehensive and in-depth exploration of the most widely used test methods for characterizing the deformation and failure behavior of materials. It presents a thorough treatise on mechanical testing, providing a valuable resource for researchers, engineers, and students seeking to understand the mechanical properties and performance of materials across various applications. The book is organized into ten chapters dedicated to specific test methods including tensile, compression, bending, torsion, multiaxial, indentation, fracture, fatigue, creep, high strain rates, nondestructive evaluation, ensuring a thorough examination of each technique's principles, procedures, and applications. It features two special chapters focusing specifically on the mechanical characterization of concrete and fiber composite materials. These chapters delve into the unique aspects and challenges associated with testing and analyzing these specific materials.
Download or read book Regulatory Guide written by U.S. Nuclear Regulatory Commission. Office of Standards Development and published by . This book was released on 1979 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contents: 1. Power reactors.--2. Research and test reactors.--3. Fuels and materials facilities.--4. Environmental and siting.--5. Materials and plant protection.--6. Products.--7. Transportation.--8. Occupational health.--9. Antitrust reviews.--10. General.
Download or read book Detection and Assessment of Dental Caries written by Andrea Ferreira Zandona and published by Springer Nature. This book was released on 2019-11-06 with total page 243 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explains how to optimize clinical conditions for detection of the earliest visible signs of dental caries and how best to assess caries activity as a basis for effective management. The available evidence from the literature on detection criteria and methods is distilled and placed in a clinical context to facilitate implementation in clinical practice. Guidance is offered on removal of the dental biofilm and the potential impact of various factors on the performance of different caries detection devices. The histological changes that occur during the caries process and their effect on the clinical appearance of caries lesions are explained. In addition, several caries classification systems based on visual detection criteria and designed to allow staging are presented. Consideration is also given to currently marketed detection aids, including methods involving light fluorescence, transillumination, and radiography. In each case, a summary of the detection performance, based on available supporting evidence, is tabulated together with advice on appropriate clinical application. The reader will find the text to be clearly written and informative, with many supporting clinical images.
Download or read book Federal Regulatory Guide written by CQ Press, and published by CQ Press. This book was released on 2020-04-28 with total page 1145 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Federal Regulatory Directory, Eighteenth Edition continues to offer a clear path through the maze of complex federal agencies and regulations, providing to-the-point analysis of regulations. Information-packed profiles of more than 100 federal agencies and departments detail the history, structure, purpose, actions, and key contacts for every regulatory agency in the U.S. government. Now updated with an improved searching structure, the Federal Regulatory Directory continues to be the leading reference for understanding federal regulations, providing a richer, more targeted exploration than is possible by cobbling together electronic and print sources.
Download or read book Essential Guide to Metals and Manufacturing written by Krishan Katyal and published by Xlibris Corporation. This book was released on 2019-04-30 with total page 314 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended for new owners, engineers, technicians, purchasing agents, chief operating officers, finance managers, quality control managers, sales managers, or other employees who want to learn and grow in metal manufacturing business. The book covers the following: 1. Basic metals, their selection, major producers, and suppliers’ websites 2. Manufacturing processes such as forgings, castings, steel fabrication, sheet metal fabrication, and stampings and their equipment suppliers’ websites 3. Machining and finishing processes and equipment suppliers’ websites 4. Automation equipment information and websites of their suppliers 5. Information about engineering drawings and quality control 6. Lists of sources of trade magazines (technical books that will provide more information on each subject discussed in the book)
Download or read book Artificial Intelligence in Medical Imaging written by Erik R. Ranschaert and published by Springer. This book was released on 2019-01-29 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a thorough overview of the ongoing evolution in the application of artificial intelligence (AI) within healthcare and radiology, enabling readers to gain a deeper insight into the technological background of AI and the impacts of new and emerging technologies on medical imaging. After an introduction on game changers in radiology, such as deep learning technology, the technological evolution of AI in computing science and medical image computing is described, with explanation of basic principles and the types and subtypes of AI. Subsequent sections address the use of imaging biomarkers, the development and validation of AI applications, and various aspects and issues relating to the growing role of big data in radiology. Diverse real-life clinical applications of AI are then outlined for different body parts, demonstrating their ability to add value to daily radiology practices. The concluding section focuses on the impact of AI on radiology and the implications for radiologists, for example with respect to training. Written by radiologists and IT professionals, the book will be of high value for radiologists, medical/clinical physicists, IT specialists, and imaging informatics professionals.
Download or read book Nuclear Safety written by Gianni Petrangeli and published by Elsevier. This book was released on 2006-05-30 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: Nuclear Safety provides the methods and data needed to evaluate and manage the safety of nuclear facilities and related processes using risk-based safety analysis, and provides readers with the techniques to assess the consequences of radioactive releases. The book covers relevant international and regional safety criteria (US, IAEA, EUR, PUN, URD, INI). The contents deal with each of the critical components of a nuclear plant, and provide an analysis of the risks arising from a variety of sources, including earthquakes, tornadoes, external impact and human factors. It also deals with the safety of underground nuclear testing and the handling of radioactive waste. - Covers all plant components and potential sources of risk including human, technical and natural factors. - Brings together information on nuclear safety for which the reader would previously have to consult many different and expensive sources. - Provides international design and safety criteria and an overview of regulatory regimes.
Download or read book Introduction to Radiologic Sciences and Patient Care E Book written by Arlene M. Adler and published by Elsevier Health Sciences. This book was released on 2013-08-13 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn the professional and patient care skills you need for clinical practice! A clear, concise introduction to the imaging sciences, Introduction to Radiologic Sciences and Patient Care meets the standards set by the American Society of Radiologic Technologists (ASRT) Curriculum Guide and the American Registry of Radiologic Technologists (ARRT) Task List for certification examinations. Covering the big picture, expert authors Arlene M. Adler and Richard R. Carlton provide a complete overview of the radiologic sciences professions and of all aspects of patient care. More than 300 photos and line drawings clearly demonstrate patient care procedures. Step-by-step procedures make it easy to follow learn skills and prepare for clinicals. Chapter outlines and objectives help you master key concepts. Key Terms with definitions are presented at the beginning of each chapter. Up-to-date references are provided at the end of each chapter. Appendices prepare you for the practice environment by including practice standards, professional organizations, state licensing agencies, the ARRT code of ethics, and patient's rights information. 100 new photos and 160 new full-color line drawings show patient care procedures. Updates ensure that you are current with the Fundamentals and Patient Care sections of the ASRT core curriculum guidelines. New and expanded coverage is added to the chapters on critical thinking, radiographic imaging, vital signs, professional ethics, and medical law. Student resources on a companion Evolve website help you master procedures with patient care lab activities and review questions along with 40 patient care videos.
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on 1953 with total page 1500 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications Cumulative Index written by United States. Superintendent of Documents and published by . This book was released on 1978 with total page 1300 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Radiation Protection and Safety of Radiation Sources written by International Atomic Energy Agency and published by . This book was released on 2014 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication is the new edition of the International Basic Safety Standards. The edition is co-sponsored by seven other international organizations European Commission (EC/Euratom), FAO, ILO, OECD/NEA, PAHO, UNEP and WHO. It replaces the interim edition that was published in November 2011 and the previous edition of the International Basic Safety Standards which was published in 1996. It has been extensively revised and updated to take account of the latest finding of the United Nations Scientific Committee on the Effects of Atomic Radiation, and the latest recommendations of the International Commission on Radiological Protection. The publication details the requirements for the protection of people and the environment from harmful effects of ionizing radiation and for the safety of radiation sources. All circumstances of radiation exposure are considered.
Download or read book Becoming a Radiologic Technologist written by Jeremy Enfinger and published by . This book was released on 2012-06-30 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is intended be used as a resource for people interested in or who are taking their prerequisite courses for becoming a Radiologic Technologist. There are many aspects to researching schools, the health care job market, and keys to success within the field of radiology. There are also many pitfalls like institutions that claim to qualify students to be able to work in a hospital as an x-ray tech after completion of their program, but do not meet accreditation standards needed to acquire the necessary credentials. This guide will provide everything the potential x-ray student needs to research accredited schools, be successful in a radiography program, and stand out among peers to gain a competitive edge when seeking a job after graduation.
Download or read book Health and Welfare of Brachycephalic Flat faced Companion Animals written by Rowena Packer and published by CRC Press. This book was released on 2021-08-05 with total page 417 pages. Available in PDF, EPUB and Kindle. Book excerpt: Health and welfare issues of brachycephalic (flat-faced) animals are one of the most pressing problems facing companion animals right now. Dogs, in particular, are suffering from a ‘brachycephalic crisis’ resulting from a perfect storm where predispositions to an array of health issues are amplified by a population boom for certain brachycephalic breeds such as the French Bulldog and Pug. But yet, for many owners, these dogs represent the perfect companion: endearing personas and cute looks in a socially desirable package. So where is the truth in all of this? This book will equip veterinary professionals, animal welfare scientists, breeders and owners with the fuller story about brachycephalic health and welfare. The first half of the book provides the context of how and why we are in this crisis, offering in-depth historical, social, ethical, communication, nursing, welfare, epidemiological, genetics and international perspectives. The second half shifts towards the clinical arena, with chapters that cover the background, diagnosis, treatment and prevention of the many unique healthcare needs of brachycephalic animals. Cutting-edge knowledge is shared on a range of disciplines including respiratory disease, ophthalmology, dermatology, dentistry, neurology, obesity, reproduction and anesthesia. With twenty chapters written by world-leading experts, lifetimes of experience and knowledge are condensed into the first book dedicated exclusively to brachycephaly in companion animals. This essential reference resource will inform, challenge and stimulate; it will open your mind to new opportunities for you to improve the welfare of brachycephalic animals by your personal and collective choices and actions. But prepare to be surprised: you may just find that your views on brachycephaly in companion animals will be changed forever.
Download or read book British Qualifications 2020 written by Kogan Page Editorial and published by Kogan Page Publishers. This book was released on 2019-12-03 with total page 724 pages. Available in PDF, EPUB and Kindle. Book excerpt: Now in its 50th edition, British Qualifications 2020 is the definitive one-volume guide to every recognized qualification on offer in the United Kingdom. With an equal focus on both academic and professional vocational studies, this indispensable guide has full details of all institutions and organizations involved in the provision of further and higher education, making it the essential reference source for careers advisers, students, and employers. It also contains a comprehensive and up-to-date description of the structure of further and higher education in the UK, including an explanation of the most recent education reforms, providing essential context for the qualifications listed. British Qualifications 2020 is compiled and checked annually to ensure the highest currency and accuracy of this valuable information. Containing details on the professional vocational qualifications available from over 350 professional institutions and accrediting bodies, informative entries for all UK academic universities and colleges, and a full description of the current structural and legislative framework of academic and vocational education, it is the complete reference for lifelong learning and continuing professional development in the UK.
Download or read book Publication Catalog of the U S Department of Health Education and Welfare written by United States. Department of Health, Education, and Welfare and published by . This book was released on 1976 with total page 696 pages. Available in PDF, EPUB and Kindle. Book excerpt:
