Download or read book Industrial Polymers Specialty Polymers and Their Applications written by Manas Chanda and published by CRC Press. This book was released on 2008-07-18 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: Derived from the fourth edition of the well-known Plastics Technology Handbook, Industrial Polymers, Specialty Polymers, and Their Applications covers a wide range of general and special types of polymers

Download or read book The Complete Technology Book on Industrial Polymers Additives Colourants and Fillers written by NIIR Board of Consultants & Engineers and published by ASIA PACIFIC BUSINESS PRESS Inc.. This book was released on 2006-01-01 with total page 478 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Indian plastic and polymer industry has taken great strides. In the last few decades, the industry has grown to the status of a leading sector in the country with a sizable base. The material is gaining notable importance in different spheres of activity and the per capita consumption is increasing at a fast pace. Numerous plastics and fibers are produced from synthetic polymers; containers from propylene, coating materials from PVC, packaging film from polyethylene, experimental apparatus from Teflon, stockings from nylon fiber, there are too many to mention them all. The reason why plastics are popular is that they may offer such advantages as transparency, self lubrication, light weight, flexibility, economy in fabricating and decorating. Properties of plastics can be modified through the use of fillers, reinforcing agents and chemical additives. Silicones are by far the most important industrial polymers and are based on silicon, an element abundantly available on our planet. Polymers are classified in three broad groups; addition polymers, condensation polymers and special polymers. It is well known that the major consumption of additives is in PVC compounds. Approximately 80% of additives are being used in PVC; however the left over 20% is consumed in compounding of other thermoplastics. Plastic master batches and fillers have their own importance in plastic processing industries. Colorants are the materials that give colour and opacity to plastics are chemically characterized as either pigments or dyes. Pigments are finely pulverized natural or synthetic particles which may be of inorganic or organic origin and insoluble in the matrix in which they are dispersed. Permanent red 2B is a mono azo pigment that is widely used in thermoplastics because it is inexpensive and has high tinting strength and good bleed resistance. Fillers are commonly employed in opaque PVC compounds to reduce cost and to improve electrical insulation properties, to improve deformation resistance of cables, to increase the hardness of a flooring compound and to reduce tackiness of highly plasticized compounds. Various calcium carbonate are used for general purpose work, china clay is commonly employed for electrical insulation, and asbestos for flooring applications. Also employed occasionally are the silicas and silicates, talc, light magnesium carbonate and barites (barium sulfate). Polymer Energy system is an award winning, innovative, proprietary process to convert waste plastics into renewable energy. Polymers are the most rapidly growing sector of the materials industry. No wonder polymers are found in everything from compact discs to high tech aerospace applications. On the basis of value added, Indian share of plastic products industry is about 0.5% of national GDP. Some of the astonishing fundamentals of the book are industrial polymers, addition polymers polyolefins, polyethylene, chlorinated polyethylene, cross linked polyethylene, linear low density polyethylene (LLDPE), high molecular weight polyethylene, high density polyethylene, ultrahigh molecular weight polyethylene, polypropylene, poly(vinyl chloride), stabilizers, plasticizers, extenders, mineral filled or glass bead/milled glass grades, antistatic/electro conductive grades, electroplatable grades, etc. The present book enlightens the processing of industrial polymers, additives, colourant and fillers. This book is an invaluable resource to new entrepreneurs, technocrats, researchers, professionals etc. TAGS Industrial Polymers, Industrial Polymers in India, Industrial Additives, Additives Industry, Chemicals and Industrial Polymers, Industrial Polymers & Additives, Industrial Colorants, Industrial Colourants and Polymers, Industrial Colorants Materials, Industrial Fillers, Fillers Business & Industrial Polymers, Opportunities in Fillers Industry, Chlorinated Polyethylene, Cross-Linked Polyethylene, Linear Low-Density Polyethylene (LLDPE), High-Molecular-Weight High-Density Polyethylene, Ultrahigh-Molecular-Weight Polyethylene, Polypropylene, Olefin Copolymers, Ethylene-Propylene Elastomer, Thermoplastic Polyester Elastomers, Thermoplastic Polyurethane Elastomers, Thermoplastic Polyolefin Elastomers, Styrene-Acrylonitrile Copolymer, Acrylonitrile-Butadiene-Styrene Terpolymer, Poly (Acrylic Acid) and Poly (Methacrylic Acid), Condensation Polymers, Polyesters, Poly (Dihydroxymethylcyclohexyl Terephthalate), Polyester-Glass-Fiber Laminates (GRP, FRP), Formaldehyde Resins, Phenol-Formaldehyde Resins, Urea-Formaldehyde Resins, Melamine-Formaldehyde Resins, Thermoplastic Polyurethane Rubbers, Ether Polymers, Polyurethane Coatings, Poly (Phenylene Oxide), Poly (Phenylene Sulfide), Silicones and Other Inorganic Polymers, Polyethylene, High Density (HDPE), Allyl Resins (Dap/Daip), Fluoropolymers, Poly (Vinylidene Fluoride) (PVDF), Film Extrusion, Injection Molding, Polyamide-Imide (PAI), Polybutylene (PB), Polycarbonate (Pc), Polyethylene Linear Low Density (LLDPE), Flexible Poly (Vinyl Chloride) (FPVC), Fillers, Calcium Carbonate, Fillers, Kaolin, Air-Floated Kaolin, Water-Washed Kaolin, Calcined Kaolin, Surface-Modified Kaolins, Pigments and Dyes, Fillers, Alumina Trihydrate (ATH), Unsuaturated Polyester, Acrylonitrile-Butadiene-Styrene (Abs), Fillers, Fiber Glass, Polyethylene, Low Density (LDPE), Fillers, Calcium Sulfate, Polymers Filled, Silicone Fluids, Silicone Resins, Silicone Rubbers, Piezoelectric Polymers, Processability of HDPE, NPCS, Niir, Process technology books, Business consultancy, Business consultant, Project identification and selection, Preparation of Project Profiles, Startup, Business guidance, Business guidance to clients, Startup Project, Startup ideas, Project for startups, Startup project plan, Business start-up, Business Plan for Startup Business, Great Opportunity for Startup, Small Start-up Business Project, Best small and cottage scale industries, Startup India, Stand up India, Small Scale Industries, New small scale ideas for Industrial Colourants, Industrial Polymers Business Ideas you can start on your own, Small scale Industrial Colourants, Guide to Starting and Operating Small Business, Business Ideas for Industrial Fillers, How to start Industrial Polymers business, Start Your Own Industrial Fillers Business, Industrial Colourants Business Plan, Business plan for Industrial Additives, Small Scale Industries in India, Industrial Polymers Based Small Business Ideas in India, Small Scale Industry You Can Start on Your Own, Business plan for small scale industries, Profitable Small Scale Manufacturing, How to Start Small Business in India, Free Manufacturing Business Plans, Small and Medium Scale Manufacturing, Profitable Small Business Industries Ideas, Business ideas for Startup

Download or read book Reactive Polymers Fundamentals and Applications written by Johannes Karl Fink and published by William Andrew. This book was released on 2005-07-15 with total page 801 pages. Available in PDF, EPUB and Kindle. Book excerpt: Loaded with practical knowledge, Reactive Polymers Fundamentals and Applications: A Concise Guide to Industrial Polymers comprehensively presents the state-of-art of methods and materials for the formulation of polymeric resins. It is an indispensable tool for chemists, engineers, and manufacturers who use, formulate, and cure raw materials into final products. The text focuses on the chemical modification of properties during the final stage of part fabrication from plastics. Newer applications range from the small scale, such as dental fillings, to industrial processes for batch fabrication. The book covers resin groups in major use in industry and under active research and development.

Download or read book Fundamentals of Industrial Chemistry written by John A. Tyrell and published by John Wiley & Sons. This book was released on 2014-04-28 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the connectivity between major chemicals, showing how a chemical is made along with why and some of the business considerations. The book helps smooth a student’s transition to industry and assists current professionals who need to understand the larger picture of industrial chemistry principles and practices. The book: Addresses a wide scope of content, emphasizing the business and polymer / pharmaceutical / agricultural aspects of industrial chemistry Covers patenting, experimental design, and systematic optimization of experiments Written by an author with extensive industrial experience but who is now a university professor, making him uniquely positioned to present this material Has problems at the end of chapters and a separate solution manual available for adopting professors Puts chemical industry topics in context and ties together many of the principles chemistry majors learn across more specific courses

Download or read book Filled Polymers written by Jean L. Leblanc and published by CRC Press. This book was released on 2009-10-14 with total page 446 pages. Available in PDF, EPUB and Kindle. Book excerpt: The idea of mixing single available materials into compounds to fulfill a set of desired properties is likely as old as mankind. Highly sophisticated polymer applications would simply be impossible without the enhancement of some of their properties through addition of fine mineral particles or synthetic or natural short fibers. Many filled polymer

Download or read book Biodegradable polymers for industrial applications written by Ray Smith and published by CRC Press. This book was released on 2005-05-17 with total page 556 pages. Available in PDF, EPUB and Kindle. Book excerpt: The vast majority of plastic products are made from petroleum-based synthetic polymers that do not degrade in a landfill or in a compost-like environment. Therefore, the disposal of these products poses a serious environmental problem. An environmentally-conscious alternative is to design/synthesize polymers that are biodegradable. Biodegradable polymers for industrial applications introduces the subject in part one by outlining the classification and development of biodegradable polymers with individual chapters on polyhydroxyalkanoates, polyesteramides and thermoplastic starch biodegradable polymers and others. The second part explores the materials available for the production of biodegradable polymers. Polymers derived from sugars, natural fibres, renewable forest resources, poly(lactic acid) and protein-nanoparticle composites will be looked at in detail in this section. Part three looks at the properties and mechanisms of degradation, prefacing the subject with a chapter on current standards. The final part explores opportunities for industrial applications, with chapters on packing, agriculture and biodegradable polycaprolactone foams in supercritical carbon dioxide. Biodegradable polymers for industrial applications explores the fundamental concepts concerning the development of biodegradable polymers, degradable polymers from sustainable sources, degradation and properties and industrial applications. It is an authoritative book that will be invaluable for academics, researchers and policy makers in the industry.

Download or read book Handbook of Industrial Water Soluble Polymers written by Peter A. Williams and published by John Wiley & Sons. This book was released on 2008-04-15 with total page 344 pages. Available in PDF, EPUB and Kindle. Book excerpt: Natural and synthetic water soluble polymers are used in a wide range of familiar industrial and consumer products, including coatings and inks, papers, adhesives, cosmetics and personal care products. They perform a variety of functions without which these products would be significantly more expensive, less effective or both. Written for research, development and formulation chemists, technologists and engineers at graduate level and beyond in the fine and specialty chemicals, polymers, food and pharmaceutical industries, the Handbook of Industrial Water Soluble Polymers deals specifically with the functional properties of both natural and synthetic water soluble polymers. By taking a function based approach, rather than a “polymer specific” approach the book illustrates how polymer structure leads to effect, and shows how different polymer types can be employed to achieve appropriate product properties.

Download or read book Additives in Polymers written by Jan C. J. Bart and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 836 pages. Available in PDF, EPUB and Kindle. Book excerpt: This industrially relevant resource covers all established and emerging analytical methods for the deformulation of polymeric materials, with emphasis on the non-polymeric components. Each technique is evaluated on its technical and industrial merits. Emphasis is on understanding (principles and characteristics) and industrial applicability. Extensively illustrated throughout with over 200 figures, 400 tables, and 3,000 references.

Download or read book Industrial Applications for Intelligent Polymers and Coatings written by Majid Hosseini and published by Springer. This book was released on 2016-05-14 with total page 715 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a comprehensive collaboration on intelligent polymers and coatings for industrial applications by worldwide researchers and specialists. The authors cover the basis and fundamental aspects of intelligent polymers and coatings, challenges, and potential mechanisms and properties. They include recent and emerging industrial applications in medical, smart textile design, oil and gas, electronic, aerospace, and automobile industries as well as other applications including microsystems, sensors, and actuators, among others. The authors discuss the potential for future research in these areas for improvement and growth of marketable applications of intelligent polymers and coatings.

Download or read book Conductive Polymers and Plastics written by Larry Rupprecht and published by William Andrew. This book was released on 1999-12-31 with total page 293 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a collection of papers by individuals in industry and academia on research and application development of conductive polymers and plastics. Conductive plastics are positioned to play an increasingly important role in affairs of mankind, specifically in the area of electrical and electronic conductivity. While general knowledge about conductive polymers and plastics has been available for many years, a true understanding of their application has only taken place in the last 3 to 4 years. This is attributed to advances in materials and processing techniques. Engineers have only begun to explore the design freedom and economic benefits of specifying conductive polymers and plastics in industrial and business applications. This book is a key reference and guide to the use of conductive polymers and plastics. It is a summary of existing technologies, but also a look at future possibilities.

Download or read book Industrial Polymer Applications written by William R Ashcroft and published by Royal Society of Chemistry. This book was released on 2019-03-07 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Polymer Applications provides a comprehensive overview of the diverse properties and applications of thermoset and thermoplastic polymer technologies used routinely in the modification, protection, repair, restoration and bonding of the main classes of industrial engineering materials such as concrete, masonry, wood, metal, rubber, plastic, glass and advanced ceramics. The Author, with extensive industrial experience in the design and development of polymeric adhesives, composites, concrete repair and industrial coatings materials, provides a balanced perspective of the essential chemistries and technologies for each of the relevant polymeric solutions. This book includes explanations as to why polymers are needed and the specific problems and key industrial application challenges that can be overcome for each class of engineering material. The use of supplementary information boxes, suggestions for further reading, and supportive appendices including worked examples delivers an easy to understand guide of relevant industrial applications of polymers. Written in an accessible way, the book provides a supplementary text for undergraduates, postgraduates and industrialists who have studied or are involved in chemistry, polymer chemistry, industrial chemistry, materials science, chemical engineering, mechanical engineering, civil engineering or corrosion engineering, science and technology.

Download or read book Radiation Processing of Polymer Materials and Its Industrial Applications written by Keizo Makuuchi and published by John Wiley & Sons. This book was released on 2012-02-07 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text examines the effect of radiation on polymers and the versatility of its industrial applications. By helping readers understand and solve problems associated with radiation processing of polymers, it serves as an important reference and fills a gap in the literature. Radiation processing can significantly improve important properties of polymers, however, there are still misconceptions about processing polymers by using ionizing radiation. This book explains the radiation processing of polymeric materials used in many industrial products including cars, airplanes, computers, and TVs. It even addresses emerging "green" issues like biomaterials and hydrogels.

Download or read book Industrial Polymers written by E. Alfredo Campo and published by . This book was released on 2008 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Polymers provides a comprehensive and very practical overview of the various plastic materials used in today's industrial applications. Its focus is on material properties and areas of application. All industrially significant plastic families and grades are introduced following the same approach: their chemical constitution, manufacturing, properties, processing, and end use applications. The consistent presentation allows easy comparison of different materials for the reader and will help with the initial identification of suitable plastic materials for a given end-use. Ample full-color illustrations are testimony to the fact that plastic materials are the ultimate tribute to man's creativity and inventiveness.

Download or read book Introduction to Industrial Polymers written by Henri Ulrich and published by Oxford University Press, USA. This book was released on 1993 with total page 188 pages. Available in PDF, EPUB and Kindle. Book excerpt: The second edition of this well-known work provides a comprehensive overview of industrial polymers. It is divided into four parts: general introduction, addition polymers, condensation polymers, and special polymers. Materials ranging from general plastics, man-made fibers, and elastomers, to blends, alloys, and functional polymers are included. The book evolved from the author's experience teaching a course on industrial polymers at Wesleyan University, and it therefore is ideal as an upper-level text as well as reference for professionals. Though most textbooks in polymer science deal with principles and are slanted toward material properties rather than chemistry, Ulrich's book details polymers which are used extensively in today's industry, their significance and social impact, and current and future trends, such as the synthesis of functional macromolecules. This second edition also introduces new copolymers with improved properties, and blends and alloys of the major thermoplastic polymers that are replacing homopolymers and copolymers. Other topics of interest are reaction polymers and self-reinforcing liquid crystal polymers, which have added a new dimension to polymer composites. Chemists, chemical engineers, and materials scientists will find this proven work an indispensable resource.

Download or read book Reactive Polymers Fundamentals and Applications written by Johannes Karl Fink and published by William Andrew. This book was released on 2017-10-24 with total page 714 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reactive Polymers: Fundamentals and Applications: A Concise Guide to Industrial Polymers, Third Edition introduces engineers and scientists to a range of reactive polymers and then details their applications and performance benefits. Basic principles and industrial processes are described for each class of reactive resin (thermoset), as well as additives, the curing process, applications and uses. The initial chapters are devoted to individual resin types (e.g., epoxides, cyanacrylates), followed by more general chapters on topics such as reactive extrusion and dental applications. Injection molding of reactive polymers, radiation curing, thermosetting elastomers, and reactive extrusion equipment are covered as well. The use of reactive polymers enables manufacturers to make chemical changes at a late stage in the production process, which, in turn, cause changes in performance and properties. Material selection and control of the reaction are essential to achieve optimal performance. Material new to this edition includes the most recent developments, applications and commercial products for each chemical class of thermosets, as well as sections on fabrication methods, reactive biopolymers, recycling of reactive polymers and case studies. Covers the basics and most recent developments, including reactive biopolymers, recycling of reactive polymers, nanocomposites and fluorosilicones Offers an indispensable guide for engineers and advanced students alike Provides extensive literature and patent review Reflects a thorough review of all literature published in this area since 2014 Features revised and updated chapters to reflect the latest research in reactive polymers

Download or read book Natural Polymers written by Ololade Olatunji and published by Springer. This book was released on 2015-12-24 with total page 372 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book introduces the most recent innovations in natural polymer applications in the food, construction, electronics, biomedical, pharmaceutical, and engineering industries. The authors provide perspectives from their respective range of industries covering classification, extraction, modification, and application of natural polymers from various sources in nature. They discuss the techniques used in analysis of natural polymers in various systems incorporating natural polymers as well as their intrinsic properties.

Download or read book Weathering of Polymers written by S.M. Halliwell and published by iSmithers Rapra Publishing. This book was released on 1992 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report describes the theory of weathering and its effect on polymer properties, methods of stabilisation, and natural and accelerated weathering tests. The problems associated with particular polymers used in outdoor applications are explained. An additional indexed section containing several hundred abstracts from the Rapra Polymer Library database provides useful references for further reading.