Download or read book Introduction to Industrial Minerals written by D.A.C. Manning and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction to Industrial Minerals introduces the reader to the subject of the new mineral raw materials that our society demands. It emphasizes the way in which, in order to satisfy the consumer, the requirements of industry control mineral exploitation, and the way fundamental mineral properties are exploited for particular applications. It describes aggregates, industrial clays and raw materials for the chemical industry. The need for high temperature processing is addressed with a chapter on interpretation and use of mineralogical phase diagrams and time-temperature-transformation diagrams. These are then applied in separate chapters on the manufacture of glass, cement, brick clays and refractories. Evaluation of geological reserves is described in the context of computer modelling of deposit quality, and the final chapter considers the use of a site after extraction, emphasizing the requirements for waste disposal.
Download or read book Industrial Minerals and Their Uses written by Peter A. Ciullo and published by William Andrew. This book was released on 1996-12-31 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: This multi-authored handbook is a unique cross-industry resource for formulators and compounders, and an invaluable reference for the producers of formulated commodities and industrial minerals. Monographs on each of the common functional industrial mineralsùasbestos, barite, calcium carbonate, diatomite, feldspar, gypsum, hormite, kaolin, mica, nepheline syenite, perlite, pyrophyllite, silica, smectite, talc, vermiculite, wollastonite, and zeoliteùinclude an overview of natural and commercial varieties, market size, and application areas. These are supported by descriptions of mineral structures and the wedding of minerals and chemicals through mineral surface modification. This orientation to the minerals and their uses forms the foundation for chapters where they are presented in the context of the overall technology of various consuming industries. Each of these industry-specific presentations covers both the chemical and mineral raw materials used by the formulator, how these are combined, and relevant test methods. These chapters serve a dual purpose. Each clarifies for technologists the function and value of the mineral constituents of their products. Equally important, they provide a primer on the technology of industries other than their own, so that raw material, formulation, processing and testing considerations can be compared and contrasted.The book concludes with a formulary demonstrating how specific mineral and chemical ingredients are actually compounded in major application areas, and technical data on scores of commercial mineral products.
Download or read book Advances in the Characterization of Industrial Minerals written by G.E. Christidis and published by The Mineralogical Society of Great Britain and Ireland. This book was released on 2011-08-31 with total page 508 pages. Available in PDF, EPUB and Kindle. Book excerpt: The advancement of human civilization has been intimately associated with the exploitation of raw materials. In fact the distinction of the main historical eras is based on the type of raw materials used. Hence, passage from the Paleolithic and Neolithic Age to the Bronze Age is characterized by the introduction of basic metals mainly copper, zinc and tin in human activities; the Iron Age is marked by the use of iron as the predominant metal. The use of metals has increased and culminated with the industrial revolution in the mid-eighteenth century, which marked the onset of the industrial age in the western world. Since then the importance of metals has gradually been surpassed by industrial minerals in the industrialized countries. Industrial minerals are raw materials used by industry for their physical and/or chemical properties. Characterization of industrial minerals is important for their assessment and can be demanding and often complicated. This new volume, co-published by the European Mineralogical Union and the Mineralogical Society of Great Britain & Ireland, is based on papers presented at an EMU-Erasmus IP School which was held in the Technical University of Crete, Chania, Greece. The aim of the School was to describe advances in some of the analytical methods used to characterize industrial minerals and to propose additional methods which are currently not used for this purpose.
Download or read book Industrial Minerals written by Patrick Degryse and published by Leuven University Press. This book was released on 2003 with total page 448 pages. Available in PDF, EPUB and Kindle. Book excerpt: This issue of Aardkundige Mededelingen deals with industrial minerals, their resources, characteristics and applications. It is the result of an academic session on industrial minerals in honour of Em. Prof. Dr. R. Ottenburgs. The contributions are organized according to five topics. In a first part, 'The Industrial Mineral World', some considerations on our natural resources, their use and political impact are presented. In a second part of the study, 'Aggregates and Natural Building Stone', a number of case-studies on the use of industrial minerals as aggregate and ornamental or building stone are discussed. In a third part of the volume, 'Mortar, Cement and Concrete', the study of ancient mortars as well as exploratory research into new materials is illustrated. In a fourth session, 'Clays and Soils', environmental aspects of soils and the economical use of clay deposits are highlighted. In a fifth and final part of the book, 'Steel', the link between ores and industrial minerals is made. It is clear that the study of industrial minerals has many faces and covers many disciplines. The impact of industrial minerals on the world's economy, but also on the environment, cannot be emphasized enough. This book gives an overview of the wide and rich diversity of research currently performed in the realm of the industrial minerals.
Download or read book Minerals in Africa written by Francis Gudyanga and published by CRC Press. This book was released on 2020-08-10 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Africa’s dire need to industrialize is universally acknowledged and it is evident that the continent’s vast mineral resources can catalyze that industrialization. This requires the promotion of local beneficiation and value addition of minerals to yield materials on which modern Africa’s industry and society can rely. This book is, therefore, about transforming Africa’s comparative advantages in minerals into the continent’s competitive edge regarding materials. Mineral beneficiation and value addition form the basis and provide opportunities for mineral-driven Africa’s industrialization. The scope of the book is three-fold with inter-connected relationships: Information, Technical, and Policy oriented. It will be a useful reference material for mining undergraduate students on beneficiation and value addition of each of the minerals found in Africa. The book, while presenting a broad overview of beneficiation and value addition of Africa’s minerals, provides crucial starting material for postgraduate research students and R&D institutions who wish to delve into more advanced methods of extraction and utilization of mineral-derived materials that are in Africa for the purpose of industrialization of the continent.
Download or read book Industrial Minerals Rocks written by Jessica Elzea Kogel and published by SME. This book was released on 2006 with total page 1576 pages. Available in PDF, EPUB and Kindle. Book excerpt: News, Inc., Portland, OR (booknews.com).
Download or read book Ore Geology and Industrial Minerals written by Anthony M. Evans and published by John Wiley & Sons. This book was released on 2013-07-03 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Much new data and many new ideas have emerged in the area of oregeology and industrial minerals since publication of the secondedition of this text in 1987. The overriding philosophy behind thisnew edition is the inclusion and integration of this new materialwithin the established framework of the text. The third edition isre-presented in the modern double-column format. Non-metallic deposits of industrial and bulk materials are fullycovered to meet the changing emphasis of courses in appliedgeology. In addition, chapter 1 has been considerably enlarged toinclude a section on mineral economics covering metals, industrialminerals and bulk materials. In this section, the various aspectsof economic exploitation of industrial and bulk materials arecompared with those of metallic deposits. Other major revisions andadditions include a section on fluid inclusions, expansion of thesection on wall rock alteration, expansion of the material onisotope studies, and the inclusion of a section on hydraulicfracturing and seismic pumping.
Download or read book Industrial Minerals written by P. W. Harben and published by . This book was released on 1997 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Minerals and Rocks written by M. Kucera and published by Elsevier. This book was released on 2013-10-22 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Minerals and Rocks is a collection of research papers concerning the study of industrial mineral deposits. This work is composed of 17 chapters that specifically highlight the research done by Czech and Slovak economic geologists in non-metallic deposits, including talc, magnesite, kaolin, and clay. After an introduction to the history of industrial minerals and rocks, this book goes on reviewing the origin, principal element cycle, genetic types, form, and size of these deposits. Considerable chapters describe the deposits of industrial minerals, rocks, and building raw materials. The remaining chapters deal with the geophysical methods prospecting and exploration and production of industrial raw materials, rocks, and minerals. This book will prove useful to mineral geologists and researchers.
Download or read book Industrial Mineralogy written by Luke L. Y. Chang and published by . This book was released on 2002 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: For an undergraduate-level course in industrial mineralogy. This text bridges the gap between the basics of mineralogy and the applications of mineral-based materials. Over forty minerals and mineral groups are correlated among basic mineralogical properties, geological occurrence, distribution of deposits, industrial processes, and uses so that each industrial mineral is fully defined. Industrial Mineralogy introduces students to the fundamentals of industrial minerals as a foundation to build a professional career and provides professionals in mineral industries with a valuable reference for research and development. *Each mineral is characterized by crystal structure and chemical composition - The two most basic and important properties that define the minerals industrial applications. *Each beneficiation process is described in basic terms rather than lengthy details. *Description of ore deposits including classic ones are cited because they represent standard occurrences. *Comprehensive references are given for each industrial mineral.
Download or read book Mining and Quarrying Trends in the Metals and Industrial Minerals Industries written by and published by . This book was released on 1995 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Industrial Minerals and Extractive Industry Geology written by P. W. Scott and published by Geological Society of London. This book was released on 2002 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Economic Geology written by Walter L. Pohl and published by John Wiley & Sons. This book was released on 2011-03-03 with total page 725 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity’s ever-increasing hunger for mineral raw materials, caused by a growing global population and ever increasing standards of living, has resulted in economic geology becoming a subject of urgent importance. This book provides a broad panorama of mineral deposits, covering their origin and geological characteristics, the principles of the search for ores and minerals, and the investigation of newly found deposits. Practical and environmental issues that arise during the life cycle of a mine and after its closure are addressed, with an emphasis on sustainable and "green" mining. The central scientific theme of the book is to place the extraordinary variability of mineral deposits in the frame of fundamental geological processes. The book is written for earth science students and practicing geologists worldwide. Professionals in administration, resource development, mining, mine reclamation, metallurgy, and mineral economics will also find the text valuable. Economic Geology is a fully revised translation of the the fifth edition of the German language text Mineralische und Energie-Rohstoffe. Additional resources for this book can be found at: www.wiley.com/go/pohl/geology. The author's website can be found at: http://www.walter-pohl.com.
Download or read book Applied Mineralogy in the Mining Industry written by W. Petruk and published by Elsevier. This book was released on 2000-11-29 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Techniques of performing applied mineralogy investigations, and applications and capabilities of recently developed instruments for measuring mineral properties are explored in this book intended for practicing applied mineralogists, students in mineralogy and metallurgy, and mineral processing engineers. The benefits of applied mineralogy are presented by using in-depth applied mineralogy studies on base metal ores, gold ores, porphyry copper ores, iron ores and industrial minerals as examples. The chapter on base metal ores includes a discussion on the effects of liberation, particle sizes and surfaces coatings of Pb, Cu, Fe, Ca and So4- on the recoveries of sphalerite, galena and chalcopyrite. The chapter on gold discusses various methods of determining the quantities of gold in different minerals, including 'invisible' gold in pyrite and arsenopyrite, so that a balance of the distribution of gold among the minerals can be calculated. This book also discusses the roles of pyrite, oxygen, moisture and bacterial (thiobacillus ferrooxidans) on reactions that produce acidic drainage from tailings piles, and summarizes currently used and proposed methods of remediation of acidic drainage.
Download or read book Industrial Minerals of the Midcontinent written by Alfred Lerner Bush and published by . This book was released on 1995 with total page 142 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Minerals Critical Minerals and the U S Economy written by National Research Council and published by National Academies Press. This book was released on 2008-03-11 with total page 263 pages. Available in PDF, EPUB and Kindle. Book excerpt: Minerals are part of virtually every product we use. Common examples include copper used in electrical wiring and titanium used to make airplane frames and paint pigments. The Information Age has ushered in a number of new mineral uses in a number of products including cell phones (e.g., tantalum) and liquid crystal displays (e.g., indium). For some minerals, such as the platinum group metals used to make cataytic converters in cars, there is no substitute. If the supply of any given mineral were to become restricted, consumers and sectors of the U.S. economy could be significantly affected. Risks to minerals supplies can include a sudden increase in demand or the possibility that natural ores can be exhausted or become too difficult to extract. Minerals are more vulnerable to supply restrictions if they come from a limited number of mines, mining companies, or nations. Baseline information on minerals is currently collected at the federal level, but no established methodology has existed to identify potentially critical minerals. This book develops such a methodology and suggests an enhanced federal initiative to collect and analyze the additional data needed to support this type of tool.
Download or read book Industrial Minerals and Rocks written by American Institute of Mining, Metallurgical, and Petroleum Engineers and published by . This book was released on 1960 with total page 956 pages. Available in PDF, EPUB and Kindle. Book excerpt:
