Download or read book Industrial Ecology written by T. E. Graedel and published by . This book was released on 2003 with total page 388 pages. Available in PDF, EPUB and Kindle. Book excerpt: To a significant degree, the first edition of this book defined the new field of industrial ecology, the restructuring of technological activity to incorporate environmental concerns. Important topics from that book are updated here, among them life-cycle assessment product design for the environment the incorporation of environmental considerations into product development integrating industrial ecology into corporations budgets and cycles In addition, the new edition includes entire chapters on topics that are becoming or have become newly important to the field: the biological model applied to industrial systems the status of resources the transition from products to services systems analysis Earth systems engineering and management While still serving as a practical guide to product designers and corporate managers, the new edition also provides guidance for the broader task of mapping a societal evolution to a more sustainable world, thus justifying industrial ecology's label as "the science and technology of sustainability."

Download or read book Taking Stock of Industrial Ecology written by Roland Clift and published by Springer. This book was released on 2015-12-11 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can we design more sustainable industrial and urban systems that reduce environmental impacts while supporting a high quality of life for everyone? What progress has been made towards reducing resource use and waste, and what are the prospects for more resilient, material-efficient economies? What are the environmental and social impacts of global supply chains and how can they be measured and improved? Such questions are at the heart of the emerging discipline of industrial ecology, covered in Taking Stock of Industrial Ecology. Leading authors, researchers and practitioners review how far industrial ecology has developed and current issues and concerns, with illustrations of what the industrial ecology paradigm has achieved in public policy, corporate strategy and industrial practice. It provides an introduction for students coming to industrial ecology and for professionals who wish to understand what industrial ecology can offer, a reference for researchers and practitioners and a source of case studies for teachers.

Download or read book Industrial Ecology and the Automobile written by T. E. Graedel and published by . This book was released on 1998 with total page 258 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the automobile as a case study of one of the industries most attuned to the concept of industrial ecology (i.e., the means by which humanity can deliberately and rationally approach and maintain a desirable carrying capacity, given continued economic, cultural and technological evolution), this text provides a general introduction to how to design for environment -- a key component of the repertoire of the 21st century engineer. Although the focus throughout is on the automobile, the concepts, suggestions, and insights are appropriate to all of technology.

Download or read book Industrial Ecology and the Automobile written by T. E. Graedel and published by . This book was released on 1998 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: Using the automobile as a case study of one of the industries most attuned to the concept of industrial ecology (i.e., the means by which humanity can deliberately and rationally approach and maintain a desirable carrying capacity, given continued economic, cultural and technological evolution), this text provides a general introduction to how to design for environment -- a key component of the repertoire of the 21st century engineer. Although the focus throughout is on the automobile, the concepts, suggestions, and insights are appropriate to all of technology.

Download or read book The Automotive Industry and the Environment written by P Nieuwenhuis and published by Elsevier. This book was released on 2003-07-25 with total page 272 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry currently faces huge challenges. The fundamental technological paradigm it relies on, volume production, has become progressively more unprofitable in the face of increasingly segmented niche markets. At the same time it faces increasing regulatory and social pressures to improve both the sustainability of its products and methods of production. Building on a wealth of research, The automotive industry and the environment addresses those challenges and how they can be met in producing a sustainable and profitable industry for the future.The authors first discuss the development of the automotive industry and the problems it currently faces. They then consider the solutions the industry can adopt. The book reviews trends in more environmentally-friendly technologies such as the use of more sustainable fuel sources and new types of modular design with built-in recyclability. However, these technologies can only be fully exploited if methods of manufacture change. The book also describes models of decentralised production, particularly the micro factory retailing (MFR) model, which provide an alternative to volume production and promise to be both more sustainable and more profitable.The automotive industry and the environment provides both a cogent diagnosis of the environmental and other problems facing the industry and a blueprint for a better future. It will be widely welcomed by the industry, policy makers and all those concerned with sustainable transport. - Addresses the challenges facing the automotive industry, from the increasing unprofitability of volume production to regulatory and social pressures to improve environmental and product sustainability - Examines how the automotive industry can meet the current challenges in producing a sustainable and profitable industry for the future - Reviews trends in more environmentally-friendly technologies such as the use of more sustainable fuel sources and new types of modular design with built-in recyclability

Download or read book A Handbook of Industrial Ecology written by Robert U. Ayres and published by Edward Elgar Publishing. This book was released on 2002-01-01 with total page 712 pages. Available in PDF, EPUB and Kindle. Book excerpt: 'The editors of this handbook have brought together 58 of the world's greatest environmental systems experts. These professionals have, in 46 specific topic headings, divided into six major sections, provided very insightful information and guidance as to what industrial ecology entails, how it can be implemented, and its benefits . . . a very valuable tool . . . This book provides essential information to mid- and top-level management that can enable industry to make more prudent business decisions regarding the manufacturing of its products.' - Robert John Klancko, Environmental Practice Industrial ecology is coming of age and this superb book brings together leading scholars to present a state-of-the-art overviews of the subject.

Download or read book Economics of Industrial Ecology written by Jeroen C. J. M. van den Bergh and published by MIT Press. This book was released on 2004 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Studies that integrate scientific, technological, and economic dimensions of industrial ecology and material flows. The use of economic modeling techniques in industrial ecology research provides distinct advantages over the customary approach, which focuses on the physical description of material flows. The thirteen chapters of Economics of Industrial Ecology integrate the natural science and technological dimensions of industrial ecology with a rigorous economic approach and by doing so contribute to the advancement of this emerging field. Using a variety of modeling techniques (including econometric, partial and general equilibrium, and input-output models) and applying them to a wide range of materials, economic sectors, and countries, these studies analyze the driving forces behind material flows and structural changes in order to offer guidance for economically and socially feasible policy solutions. After a survey of concepts and relevant research that provides a useful background for the chapters that follow, the book presents historical analyses of structural change from statistical and decomposition approaches; a range of models that predict structural change on the national and regional scale under different policy scenarios; two models that can be used to analyze waste management and recycling operations; and, adopting the perspective of local scale, an analysis of the dynamics of eco-industrial parks in Denmark and the Netherlands. The book concludes with a discussion of the policy implications of an economic approach to industrial ecology.

Download or read book Industrial Ecology and Sustainable Engineering written by T. E. Graedel and published by . This book was released on 2010 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: KEY BENEFIT The first book of its kind devoted completely to industrial ecology/green engineering, this introduction uses industrial ecology principles and cases to ground the discussion of sustainable engineering-and offers practical and reasonable approaches to design decisions. KEY TOPICS Technology and Sustainability; Industrial Ecology(IE) and Sustainable Engineering (SE) Concepts; Relevance of Biological Ecology to Technology; Metabolic Analysis; Technological Change and Evolving Risk; Social Dimensions of Industrial Ecology; Concept of Sustainability; SE; Industrial Product Development; Design for Environment and for Sustainability; Introduction to Life-Cycle Assessment; LCA Impact and Interpretation Stages; Streamlining the LCA Process; Systems Analysis; Industrial Ecosystems; Material Flow Analysis; National Material Accounts; Energy and IE; Water and IE; Urban IE; Modeling in IE; Scenarios for IE; Status of Resources; IE and SE in Developing Countries; IE and Sustainability in the Corporation/Government/Society MARKET A useful reference for professionals in environmental science, environmental policy, and engineering.

Download or read book Industrial Ecology written by Stanley E. Manahan and published by Routledge. This book was released on 2017-11-01 with total page 334 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial ecology may be a relatively new concept - yet it's already proven instrumental for solving a wide variety of problems involving pollution and hazardous waste, especially where available material resources have been limited. By treating industrial systems in a manner that parallels ecological systems in nature, industrial ecology provides a substantial addition to the technologies of environmental chemistry. Stanley E. Manahan, bestselling author of many environmental chemistry books for Lewis Publishers, now examines Industrial Ecology: Environmental Chemistry and Hazardous Waste. His study of this innovative technology uses an overall framework of industrial ecology to cover hazardous wastes from an environmental chemistry perspective. Chapters one to seven focus on how industrial ecology relates to environmental science and technology, with consideration of the anthrosphere as one of five major environmental spheres. Subsequent chapters deal specifically with hazardous substances and hazardous waste, as they relate to industrial ecology and environmental chemistry.

Download or read book Industrial Ecology and Global Change written by R. Socolow and published by Cambridge University Press. This book was released on 1994 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses a different approach to addressing environmental problems, aimed at a broad interdisciplinary audience.

Download or read book The Global Automotive Industry written by Paul Nieuwenhuis and published by John Wiley & Sons. This book was released on 2015-10-12 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: The automotive industry is still one of the world's largest manufacturing sectors, but it suffers from being very technology-focused as well as being relatively short-term focused. There is little emphasis within the industry and its consultancy and analyst supply network on the broader social and economic impacts of automobility and of the sector that provides it. The Global Automotive Industry addresses this need and is a first port of call for any academic, official or consultant wanting an overview of the state of the industry. An international team of specialist researchers, both from academia and business, review and analyse the key issues that make vehicle manufacturing still the world’s premier manufacturing sector, closely tied in with the fortunes of both established and newly emerging economies. In doing so, it covers issues related to manufacturing, both established practices as well as new developments; issues relating to distribution, marketing and retail, vehicle technologies and regulatory trends; and, crucially, labour practices and the people who build cars. In all this it explains both how the current situation arose and also likely future trajectories both in terms of social and regulatory trends, as the technological, marketing and labour practice responses to those, leading in many cases to the development of new business models. Key features Provides a global overview of the automotive industry, covering its current state and considering future challenges Contains contributions from international specialists in the automotive sector Presents current research and sets this in an historical and broader industry context Covers threats to the industry, including globalization, economic and environmental sustainability The Global Automotive Industry is a must-have reference for researchers and practitioners in the automotive industry and is an excellent source of information for business schools, governments, and graduate and undergraduate students in automotive engineering.

Download or read book Industrial Ecology of the Automobile written by and published by . This book was released on 1997 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Waste Input Output Analysis written by Shinichiro Nakamura and published by Springer Science & Business Media. This book was released on 2009-02-08 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial ecology (IE) is a rapidly growing scienti?c discipline that is concerned with the sustainability of industrial systems under explicit consideration of its int- dependence with natural systems. In recent years, there has been an ever-increasing awareness about the applicability of Input-Output Analysis (IOA) to IE, in particular to LCA (life cycle assessment) and MFA (material ?ow analysis). This is witnessed in the growing number of papers at ISIE (International Society for Industrial Ec- ogy) conferences, which use IOA, and also by the installment of subject editors on IOA in the International Journal of Life Cycle Assessment. It can be said that IE has become a major ?eld of application for IOA. The broadening of users of IOA from various backgrounds implies a need for a self-contained textbook on IOA that can meet the needs of students and practitioners without compromising on basic c- cepts and the latest developments. This book was written with the aim of ?lling this need, and is primarily addressed to students and practitioners of IE. As the title suggests, the core contents of the book have grown out of our research in IOA of waste management issues over the last decade. We have been fascinated by the versatile nature of IOA with regard to various technical issues of waste m- agement in particular, and to IE in general. For us (both economists by training), IOA has turned out to be extremely useful in establishing productive communi- tion with scientists and engineers interested in IE.

Download or read book Industrial Environmental Performance Metrics written by National Academy of Engineering and National Research Council and published by National Academies Press. This book was released on 1999-08-24 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Industrial Environmental Performance Metrics is a corporate-focused analysis that brings clarity and practicality to the complex issues of environmental metrics in industry. The book examines the metrics implications to businesses as their responsibilities expand beyond the factory gateâ€"upstream to suppliers and downstream to products and services. It examines implications that arise from greater demand for comparability of metrics among businesses by the investment community and environmental interest groups. The controversy over what sustainable development means for businesses is also addressed. Industrial Environmental Performance Metrics identifies the most useful metrics based on case studies from four industriesâ€"automotive, chemical, electronics, and pulp and paperâ€"and includes specific corporate examples. It contains goals and recommendations for public and private sector players interested in encouraging the broader use of metrics to improve industrial environmental performance and those interested in addressing the tough issues of prioritization, weighting of metrics for meaningful comparability, and the longer term metrics needs presented by sustainable development.

Download or read book The Metrics of Material and Metal Ecology written by M.A. Reuter and published by Elsevier. This book was released on 2005-11-02 with total page 721 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a must for individuals and companies that have an interest in developing sustainable technology and systems in the complex 'Web of Metals' on a first principles, technological and economic basis, with a focus to the minerals, metals and product manufacturing industries. In this inter-, intra- and trans-disciplinary book the material/metal cycle will be central, addressing technology as the basis for achieving sustainability within the system of primary mineral and metal producing, and the consumer product material cycles, linked to nature's cycles. The following major topics (not exclusive) are discussed in a detail, which will satisfy company CEO's and students of environment, engineering, economics, and law alike: (i) industrial ecology, (ii) system engineering concepts, (iii) development of future breakthrough technology as well optimization of present technology, (iv) process fundamentals (e.g. thermodynamics, separation physics, transport processes etc.), (v) product manufacture and design (for recycling), (vi) environmental legislation and (vii) technology as a basis for achieving sustainability within our present society.The book discusses contentious issues such as the limits of recycling determined by physics, chemistry, economics and process technology, therefore providing the reader with a fundamental basis to understand and critically discuss the validity of environmental legislation. Furthermore, the 'Web of Metals' (i.e. the dynamic interconnection of metal and material cycles and product systems) will reveal that, if the application of environmental evaluation techniques such as material flow analysis, life cycle assessment etc. are not carried out on a sufficient theoretical basis, technological and economic understanding, analyses could lead to erroneous and in the end environmentally harmful conclusions.The book is illustrated with many industrial examples embracing car and electronic consumer goods manufacturing and recycling, and the production and recycling of all major metals (e.g. steel, aluminium, copper, zinc, lead, magnesium, PGM's and PM's) and to an extent plastics. A complete section of the book is devoted to the recycling of light metals. Numerous colour figures and photos, plant and reactor data as well as software and computer models (running under Matlab's Simulink® and AMPL® as well as tools based on neural net technology (CSenseTM) are provided to give the reader the opportunity to investigate the various topics addressed in this book at various levels of depth and theoretical sophistication, providing a wealth of information, share-data and industrial know-how.Finally, the book philosophically discusses how to harmonize the resource, life and technological cycles depicted by the figure on the cover to make a contribution to the sustainable use of resources and products.* Material and Metal Ecology and the various modelling aspects to quantify this * System modelling of recycling systems with applications in the automotive and consumergoods sector* Metallurgical metal recycling with applications in aluminium, supplemented with various modelling examples from thermodynamics, exergy, neural nets to CFD

Download or read book The Automotive Industry and the Environment written by Paul Niewenhuis and published by CRC Press. This book was released on 2003-08-15 with total page 282 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on a wealth of research, The Automotive Industry and the Environment addresses current challenges in the automotive industry and how they can be met. The authors discuss the development of the automotive industry and the problems it currently faces and consider possible solutions. The book reviews trends in more environmental-friendly technologies, such as the use of more sustainable fuel sources and new types of modular designs with built-in recyclability. The book also describes new models of decentralized production, particularly the micro factory retailing (MFR) model, that provide an alternative to volume production and promise to be both more sustainable and more profitable.

Download or read book Twin Control written by Mikel Armendia and published by Springer. This book was released on 2019-01-05 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book summarizes the results of the European research project “Twin-model based virtual manufacturing for machine tool-process simulation and control” (Twin-Control). The first part reviews the applications of ICTs in machine tools and manufacturing, from a scientific and industrial point of view, and introduces the Twin-Control approach, while Part 2 discusses the development of a digital twin of machine tools. The third part addresses the monitoring and data management infrastructure of machines and manufacturing processes and numerous applications of energy monitoring. Part 4 then highlights various features developed in the project by combining the developments covered in Parts 3 and 4 to control the manufacturing processes applying the so-called CPSs. Lastly, Part 5 presents a complete validation of Twin-Control features in two key industrial sectors: aerospace and automotive. The book offers a representative overview of the latest trends in the manufacturing industry, with a focus on machine tools.