Download or read book Industrial Ecology and Industry Symbiosis for Environmental Sustainability written by Xiaohong Li and published by Springer. This book was released on 2017-12-01 with total page 144 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book opens up a critical dimension to the interdisciplinary field of Industrial Ecology (IE) and one of its four areas - Industrial Symbiosis (IS). Presenting the concept of closed-loop thinking, this timely book explains how industries and societies can achieve environmental sustainability, a necessity for today’s businesses. Providing a critical review of the definitions and developments of both IE and IS, this study establishes their fundamental role in improving environmental sustainability. The author identifies valuable lessons to be learned and presents conceptual frameworks to guide future IE and IS applications. Transforming industrial systems into closed-loop industrial ecosystems dramatically reduces the negative impact of industrial activities on the environment. Therefore, this book is an important read not only for operations management scholars, but also those who are interested in ensuring an environmentally sustainable future.
Download or read book Environmental Sustainability and Industries written by Pardeep Singh and published by Elsevier. This book was released on 2022-06-03 with total page 581 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Sustainability and Industries identifies and discusses critical areas related to environmentally conscious industrial development of products and services that may support more sustainable and equitable societies. This book addresses pollution prevention by referring to the use of processes, practices, and materials that reduce or eliminate the generation of pollutants at the source of production, more efficient use of raw materials, energy, water or other resources, or by conserving natural resources by maintaining clean production. It explains industrial energy efficiency as the most cost-effective use of energy in manufacturing processes, reducing its wastage as well as the total consumption of primary energy resources. Life cycle assessment is used as an analytical method to quantify environmental impacts, focusing on environmental considerations concerning process design and optimization, and including various sustainable manufacturing parameters in the context of industrial processes and proposes a classification of identified parameters to evaluate and optimize the manufacturing performances. The book also dives into industrial ecology, investigating how, where, and why environmental improvements can be made to develop a sustainable industry, meeting the needs of current generations without sacrificing the needs of the future ones. This book analyzes a company's environmental, social, and economic performance and their interrelationships, emphasizing the importance of identifying and understanding causal relationships between alternative approaches to action and their impact on financial and nonfinancial performance. It concludes with a view on the future of sustainable industrial systems stressing change as a joint effort of scientists, governments, people in business, and academicians. - Offers compiled information on the environmental sustainability for industry - Provides principles and advanced trends and approaches for environmental sustainability for the industrial sector - Discusses established and emerging technologies and processes for sustainable approaches for industry - Presents the development in the use of the assessment models as a tool to support the research and applications of different sustainable technologies and processes
Download or read book Industrial Ecology and Global Change written by R. Socolow and published by Cambridge University Press. This book was released on 1994 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: Discusses a different approach to addressing environmental problems, aimed at a broad interdisciplinary audience.
Download or read book Taking Stock of Industrial Ecology written by Roland Clift and published by Springer. This book was released on 2015-12-11 with total page 373 pages. Available in PDF, EPUB and Kindle. Book excerpt: How can we design more sustainable industrial and urban systems that reduce environmental impacts while supporting a high quality of life for everyone? What progress has been made towards reducing resource use and waste, and what are the prospects for more resilient, material-efficient economies? What are the environmental and social impacts of global supply chains and how can they be measured and improved? Such questions are at the heart of the emerging discipline of industrial ecology, covered in Taking Stock of Industrial Ecology. Leading authors, researchers and practitioners review how far industrial ecology has developed and current issues and concerns, with illustrations of what the industrial ecology paradigm has achieved in public policy, corporate strategy and industrial practice. It provides an introduction for students coming to industrial ecology and for professionals who wish to understand what industrial ecology can offer, a reference for researchers and practitioners and a source of case studies for teachers.
Download or read book Industrial Symbiosis for the Circular Economy written by Roberta Salomone and published by Springer Nature. This book was released on 2020-02-07 with total page 203 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book is designed to help public and private decision-makers and academics deepen their knowledge and understanding of the contexts, obstacles and challenges of a variety of business types involved in Industrial Symbiosis and Circular Economy practices. Industrial Symbiosis is reported in the Action Plan on the Circular Economy developed by the European Commission in 2015 (COM / 2015/0614 final) and in its revision of 14 March 2017, but relatively little is known of how these practices start, develop or fail, and mutate in a rapidly changing context. Including selected contributions presented at the 24th ISDRS 2018 Conference, “Actions for a Sustainable World: from theory to practice” in the two theme tracks “5c. Circular economy, zero waste & innovation” and “5g. Industrial symbiosis, networking and cooperation as part of industrial ecology”, this book offers a transdisciplinary perspective on real experiences of industrial symbiosis, performed both by industries and the scientific community, best practices, success and unsuccessful cases (implemented or under implementation), with the final aim to promote the adoption of Industrial Symbiosis as an operational and systematic tool for the Circular Economy. In particular, a focus on the environmental, social, and economic impact of Circular Economy and Industrial Symbiosis practices, and how those impacts may be context and/or scale dependent is given.
Download or read book Responsible Consumption and Production written by Walter Leal Filho and published by Springer. This book was released on 2020-03-04 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems related to the process of industrialisation such as biodiversity depletion, climate change and a worsening of health and living conditions, especially but not only in developing countries, intensify. Therefore, there is an increasing need to search for integrated solutions to make development more sustainable. The United Nations has acknowledged the problem and approved the “2030 Agenda for Sustainable Development”. On 1st January 2016, the 17 Sustainable Development Goals (SDGs) of the Agenda officially came into force. These goals cover the three dimensions of sustainable development: economic growth, social inclusion and environmental protection. The Encyclopedia of the UN Sustainable Development Goals comprehensively addresses the SDGs in an integrated way. It encompasses 17 volumes, each one devoted to one of the 17 SDGs. This volume addresses SDG 12, namely "Ensure sustainable consumption and production patterns" and contains the description of a range of terms, which allows a better understanding and fosters knowledge. Concretely, the defined targets are: Implement the 10-Year Framework of Programmes on Sustainable Consumption and Production Patterns, all countries taking action, with developed countries taking the lead, taking into account the development and capabilities of developing countries Achieve the sustainable management and efficient use of natural resources Halve per capita global food waste at the retail and consumer levels and reduce food losses along production and supply chains, including post-harvest losses Achieve the environmentally sound management of chemicals and all wastes throughout their life cycle, in accordance with agreed international frameworks, and significantly reduce their release to air, water and soil in order to minimize their adverse impacts on human health and the environment Substantially reduce waste generation through prevention, reduction, recycling and reuse Encourage companies, especially large and transnational companies, to adopt sustainable practices and to integrate sustainability information into their reporting cycle Promote public procurement practices that are sustainable, in accordance with national policies and priorities Ensure that people everywhere have the relevant information and awareness for sustainable development and lifestyles in harmony with nature Support developing countries to strengthen their scientific and technological capacity to move towards more sustainable patterns of consumption and production Develop and implement tools to monitor sustainable development impacts for sustainable tourism that creates jobs and promotes local culture and products Rationalize inefficient fossil-fuel subsidies that encourage wasteful consumption by removing market distortions, in accordance with national circumstances, including by restructuring taxation and phasing out those harmful subsidies, where they exist, to reflect their environmental impacts, taking fully into account the specific needs and conditions of developing countries and minimizing the possible adverse impacts on their development in a manner that protects the poor and the affected communities Editorial Board Medani P. Bhandari, Luciana Londero Brandli, Morgane M. C. Fritz, Ulla A. Saari, Leonardo L. Sta Romana
Download or read book Annual Report written by United States. Federal Emergency Management Agency and published by . This book was released on 1983 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Resource Efficiency of Processing Plants written by Stefan Krämer and published by John Wiley & Sons. This book was released on 2018-05-07 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph provides foundations, methods, guidelines and examples for monitoring and improving resource efficiency during the operation of processing plants and for improving their design. The measures taken to improve their energy and resource efficiency are strongly influenced by regulations and standards which are covered in Part I of this book. Without changing the actual processing equipment, the way how the processes are operated can have a strong influence on the resource efficiency of the plants and this potential can be exploited with much smaller investments than needed for the introduction of new process technologies. This aspect is the focus of Part II. In Part III we discuss physical changes of the process technology such as heat integration, synthesis and realization of optimal processes, and industrial symbiosis. The last part deals with the people that are needed to make these changes possible and discusses the path towards a resource efficiency culture. Written with industrial solutions in mind, this text will benefit practitioners as well as the academic community.
Download or read book Sustainable Manufacturing written by Rainer Stark and published by Springer. This book was released on 2017-01-16 with total page 286 pages. Available in PDF, EPUB and Kindle. Book excerpt: This edited volume presents the research results of the Collaborative Research Center 1026 “Sustainable manufacturing - shaping global value creation”. The book aims at providing a reference guide of sustainable manufacturing for researchers, describing methodologies for development of sustainable manufacturing solutions. The volume is structured in four chapters covering the following topics: sustainable manufacturing technology, sustainable product development, sustainable value creation networks and systematic change towards sustainable manufacturing. The target audience comprises both researchers and practitioners in the field of sustainable manufacturing, but the book may also be beneficial for graduate students.
Download or read book Sustainable Development and Environmental Management written by Corrado Clini and published by Springer Science & Business Media. This book was released on 2010-06-29 with total page 471 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the new EU approach to environmental management and its attempt to place it in the perspective of sustainable development. Written by eminent scientists working on sustainable development, the book covers not only theoretical aspects but also gives practical cases and examples. China and other large and fast growing economies are putting increasing pressures on the global environment, but they are also looking at the European experience with great interest.
Download or read book Enhancing Future Skills and Entrepreneurship written by Kuldip Singh Sangwan and published by Springer Nature. This book was released on 2020-07-27 with total page 281 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book presents the proceedings of the 3rd Indo-German Conference on Sustainability in Engineering held at Birla Institute of Technology and Science, Pilani, India, on September 16–17, 2019. Intended to foster the synergies between research and education, the conference is one of the joint activities of the BITS Pilani and TU Braunschweig conducted under the auspices of Indo-German Center for Sustainable Manufacturing, established in 2009. The book is divided into three sections: engineering, education and entrepreneurship, covering a range of topics, such as renewable energy forecasting, design & simulation, Industry 4.0, and soft & intelligent sensors for energy efficiency. It also includes case studies on lean and green manufacturing, and life cycle analysis of ceramic products, as well as papers on teaching/learning methods based on the use of learning factories to improve students’problem-solving and personal skills. Moreover, the book discusses high-tech ideas to help the large number of unemployed engineering graduates looking for jobs become tech entrepreneurs. Given its broad scope, it will appeal to academics and industry professionals alike.
Download or read book Eco industrial Strategies written by Edward Cohen-Rosenthal and published by Routledge. This book was released on 2017-09-29 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt: Eco-industrial development is born from the realisation that the places where we work waste too much and unnecessarily pollute the land, air and water. This book explores the key issues involved in developing eco-parks and identifies the stakeholders and their roles in such projects.
Download or read book Sustainable Industrial Design and Waste Management written by Salah El Haggar and published by Academic Press. This book was released on 2010-07-28 with total page 420 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sustainable Industrial Design and Waste Management was inspired by the need to have a text that enveloped awareness and solutions to the ongoing issues and concerns of waste generated from industry. The development of science and technology has increased human capacity to extract resources from nature and it is only recently that industries are being held accountable for the detrimental effects the waste they produce has on the environment. Increased governmental research, regulation and corporate accountability are digging up issues pertaining to pollution control and waste treatment and environmental protection. The traditional approach for clinical waste, agricultural waste, industrial waste, and municipal waste are depleting our natural resources. The main objective of this book is to conserve the natural resources by approaching 100 % full utilization of all types of wastes by cradle – to - cradle concepts, using Industrial Ecology methodology documented with case studies. Sustainable development and environmental protection cannot be achieved without establishing the concept of industrial ecology. The main tools necessary for establishing Industrial Ecology and sustainable development will be covered in the book. The concept of "industrial ecology will help the industrial system to be managed and operated more or less like a natural ecosystem hence causing as less damage as possible to the surrounding environment. - Numerous case studies allow the reader to adapt concepts according to personal interest/field - Reveals innovative technologies for the conservation of natural resources - The only book which provides an integrated approach for sustainable development including tools, methodology, and indicators for sustainable development
Download or read book Technology and Environment written by National Academy of Engineering and published by National Academies Press. This book was released on 1989-02-01 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Technology and Environment is one of a series of publications designed to bring national attention to issues of the greatest importance in engineering and technology during the 25th year of the National Academy of Engineering. A "paradox of technology" is that it can be both the source of environmental damage and our best hope for repairing such damage today and avoiding it in the future. Technology and Environment addresses this paradox and the blind spot it creates in our understanding of environmental crises. The book considers the proximate causes of environmental damageâ€"machines, factories, cities, and so onâ€"in a larger societal context, from which the will to devise and implement solutions must arise. It helps explain the depth and difficulty of such issues as global warming and hazardous wastes but also demonstrates the potential of technological innovation to have a constructive impact on the planet. With a range of data and examples, the authors cover such topics as the "industrial metabolism" of production and consumption, the environmental consequences of the information era, and design of environmentally compatible technologies.
Download or read book To Life written by Linda Weintraub and published by Univ of California Press. This book was released on 2012-09-01 with total page 380 pages. Available in PDF, EPUB and Kindle. Book excerpt: This title documents the burgeoning eco art movement from A to Z, presenting a panorama of artistic responses to environmental concerns, from Ant Farms anti-consumer antics in the 1970s to Marina Zurkows 2007 animation that anticipates the havoc wreaked upon the planet by global warming.
Download or read book Food Waste to Valuable Resources written by Rajesh Banu and published by Academic Press. This book was released on 2020-04-28 with total page 464 pages. Available in PDF, EPUB and Kindle. Book excerpt: Food Waste to Valuable Resources: Applications and Management compiles current information pertaining to food waste, placing particular emphasis on the themes of food waste management, biorefineries, valuable specialty products and technoeconomic analysis. Following its introduction, this book explores new valuable resource technologies, the bioeconomy, the technoeconomical evaluation of food-waste-based biorefineries, and the policies and regulations related to a food-waste-based economy. It is an ideal reference for researchers and industry professionals working in the areas of food waste valorization, food science and technology, food producers, policymakers and NGOs, environmental technologists, environmental engineers, and students studying environmental engineering, food science, and more. - Presents recent advances, trends and challenges related to food waste valorization - Contains invaluable knowledge on of food waste management, biorefineries, valuable specialty products and technoeconomic analysis - Highlights modern advances and applications of food waste bioresources in various products' recovery
Download or read book Environment written by Glenn Adelson and published by Yale University Press. This book was released on 2008-01-01 with total page 980 pages. Available in PDF, EPUB and Kindle. Book excerpt: This major anthology is the first to apply a fully interdisciplinary approach to environmental studies. A comprehensive guide to environmental literacy, the book demonstrates how the sciences, social sciences, and humanities all contribute to understanding our interrelationships with the natural world. Though not specialized, Environment is a book that even specialists can learn from. Ten innovative case studies--climate shock, species endangerment, nuclear power, biotechnology, sustainable development, deforestation, environmental security, globalization, wilderness, and the urban environment--are followed by readings from specific disciplines. These can be integrated with the case studies to shape individual interests and teaching strategies. The volume presents an imaginative array of texts, from scientific papers to poetry, legal decisions to historical accounts, personal essays to economic analysis. Taken together, these selections provide a balanced, authoritative, and up-to-date treatment of key issues in environmental studies.
