Download or read book Industrial Case Study on the Integration of SysML and AUTOSAR with Triple Graph Grammars written by Giese, Holger and published by Universitätsverlag Potsdam. This book was released on 2012 with total page 66 pages. Available in PDF, EPUB and Kindle. Book excerpt: During the overall development of complex engineering systems different modeling notations are employed. For example, in the domain of automotive systems system engineering models are employed quite early to capture the requirements and basic structuring of the entire system, while software engineering models are used later on to describe the concrete software architecture. Each model helps in addressing the specific design issue with appropriate notations and at a suitable level of abstraction. However, when we step forward from system design to the software design, the engineers have to ensure that all decisions captured in the system design model are correctly transferred to the software engineering model. Even worse, when changes occur later on in either model, today the consistency has to be reestablished in a cumbersome manual step. In this report, we present in an extended version of [Holger Giese, Stefan Neumann, and Stephan Hildebrandt. Model Synchronization at Work: Keeping SysML and AUTOSAR Models Consistent. In Gregor Engels, Claus Lewerentz, Wilhelm Schäfer, Andy Schürr, and B. Westfechtel, editors, Graph Transformations and Model Driven Enginering - Essays Dedicated to Manfred Nagl on the Occasion of his 65th Birthday, volume 5765 of Lecture Notes in Computer Science, pages 555-579. Springer Berlin / Heidelberg, 2010.] how model synchronization and consistency rules can be applied to automate this task and ensure that the different models are kept consistent. We also introduce a general approach for model synchronization. Besides synchronization, the approach consists of tool adapters as well as consistency rules covering the overlap between the synchronized parts of a model and the rest. We present the model synchronization algorithm based on triple graph grammars in detail and further exemplify the general approach by means of a model synchronization solution between system engineering models in SysML and software engineering models in AUTOSAR which has been developed for an industrial partner. In the appendix as extension to [19] the meta-models and all TGG rules for the SysML to AUTOSAR model synchronization are documented.
Download or read book Theories and Intricacies of Information Security Problems written by Anne V. D. M. Kayem and published by Universitätsverlag Potsdam. This book was released on 2013 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Keine Angaben
Download or read book Scalable Compatibility for Embedded Real time Components Via Language Progressive Timed Automata written by Stefan Neumann and published by Universitätsverlag Potsdam. This book was released on 2013 with total page 82 pages. Available in PDF, EPUB and Kindle. Book excerpt: The proper composition of independently developed components of an embedded real- time system is complicated due to the fact that besides the functional behavior also the non-functional properties and in particular the timing have to be compatible. Nowadays related compatibility problems have to be addressed in a cumbersome integration and configuration phase at the end of the development process, that in the worst case may fail. Therefore, a number of formal approaches have been developed, which try to guide the upfront decomposition of the embedded real-time system into components such that integration problems related to timing properties can be excluded and that suitable configurations can be found. However, the proposed solutions require a number of strong assumptions that can be hardly fulfilled or the required analysis does not scale well. In this paper, we present an approach based on timed automata that can provide the required guarantees for the later integration without strong assumptions, which are difficult to match in practice. The approach provides a modular reasoning scheme that permits to establish the required guarantees for the integration employing only local checks, which therefore also scales. It is also possible to determine potential configuration settings by means of timed game synthesis.
Download or read book Cache Conscious Column Organization in In memory Column Stores written by David Schwalb and published by Universitätsverlag Potsdam. This book was released on 2013 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cost models are an essential part of database systems, as they are the basis of query performance optimization. Based on predictions made by cost models, the fastest query execution plan can be chosen and executed or algorithms can be tuned and optimised. In-memory databases shifts the focus from disk to main memory accesses and CPU costs, compared to disk based systems where input and output costs dominate the overall costs and other processing costs are often neglected. However, modelling memory accesses is fundamentally different and common models do not apply anymore. This work presents a detailed parameter evaluation for the plan operators scan with equality selection, scan with range selection, positional lookup and insert in in-memory column stores. Based on this evaluation, a cost model based on cache misses for estimating the runtime of the considered plan operators using different data structures is developed. Considered are uncompressed columns, bit compressed and dictionary encoded columns with sorted and unsorted dictionaries. Furthermore, tree indices on the columns and dictionaries are discussed. Finally, partitioned columns consisting of one partition with a sorted and one with an unsorted dictionary are investigated. New values are inserted in the unsorted dictionary partition and moved periodically by a merge process to the sorted partition. An efficient attribute merge algorithm is described, supporting the update performance required to run enterprise applications on read-optimised databases. Further, a memory traffic based cost model for the merge process is provided.
Download or read book Model driven engineering of adaptation engines for self adaptive software written by Thomas Vogel and published by Universitätsverlag Potsdam. This book was released on 2013 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt: The development of self-adaptive software requires the engineering of an adaptation engine that controls and adapts the underlying adaptable software by means of feedback loops. The adaptation engine often describes the adaptation by using runtime models representing relevant aspects of the adaptable software and particular activities such as analysis and planning that operate on these runtime models. To systematically address the interplay between runtime models and adaptation activities in adaptation engines, runtime megamodels have been proposed for self-adaptive software. A runtime megamodel is a specific runtime model whose elements are runtime models and adaptation activities. Thus, a megamodel captures the interplay between multiple models and between models and activities as well as the activation of the activities. In this article, we go one step further and present a modeling language for ExecUtable RuntimE MegAmodels (EUREMA) that considerably eases the development of adaptation engines by following a model-driven engineering approach. We provide a domain-specific modeling language and a runtime interpreter for adaptation engines, in particular for feedback loops. Megamodels are kept explicit and alive at runtime and by interpreting them, they are directly executed to run feedback loops. Additionally, they can be dynamically adjusted to adapt feedback loops. Thus, EUREMA supports development by making feedback loops, their runtime models, and adaptation activities explicit at a higher level of abstraction. Moreover, it enables complex solutions where multiple feedback loops interact or even operate on top of each other. Finally, it leverages the co-existence of self-adaptation and off-line adaptation for evolution.
Download or read book HPI Future SOC Lab proceedings 2011 written by Meinel, Christoph and published by Universitätsverlag Potsdam. This book was released on 2013 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt: Together with industrial partners Hasso-Plattner-Institut (HPI) is currently establishing a “HPI Future SOC Lab,” which will provide a complete infrastructure for research on on-demand systems. The lab utilizes the latest, multi/many-core hardware and its practical implementation and testing as well as further development. The necessary components for such a highly ambitious project are provided by renowned companies: Fujitsu and Hewlett Packard provide their latest 4 and 8-way servers with 1-2 TB RAM, SAP will make available its latest Business byDesign (ByD) system in its most complete version. EMC² provides high performance storage systems and VMware offers virtualization solutions. The lab will operate on the basis of real data from large enterprises. The HPI Future SOC Lab, which will be open for use by interested researchers also from other universities, will provide an opportunity to study real-life complex systems and follow new ideas all the way to their practical implementation and testing. This technical report presents results of research projects executed in 2011. Selected projects have presented their results on June 15th and October 26th 2011 at the Future SOC Lab Day events.
Download or read book Explorative authoring of Active Web content in a mobile environment written by Calmez, Conrad and published by Universitätsverlag Potsdam. This book was released on 2013 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Developing rich Web applications can be a complex job - especially when it comes to mobile device support. Web-based environments such as Lively Webwerkstatt can help developers implement such applications by making the development process more direct and interactive. Further the process of developing software is collaborative which creates the need that the development environment offers collaboration facilities. This report describes extensions of the webbased development environment Lively Webwerkstatt such that it can be used in a mobile environment. The extensions are collaboration mechanisms, user interface adaptations but as well event processing and performance measuring on mobile devices.
Download or read book Enriching Raw Events to Enable Process Intelligence written by Nico Herzberg and published by Universitätsverlag Potsdam. This book was released on 2013 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The JCop language specification Version 1 0 April 2012 written by Malte Appeltauer and published by Universitätsverlag Potsdam. This book was released on 2012 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: Program behavior that relies on contextual information, such as physical location or network accessibility, is common in today's applications, yet its representation is not sufficiently supported by programming languages. With context-oriented programming (COP), such context-dependent behavioral variations can be explicitly modularized and dynamically activated. In general, COP could be used to manage any context-specific behavior. However, its contemporary realizations limit the control of dynamic adaptation. This, in turn, limits the interaction of COP's adaptation mechanisms with widely used architectures, such as event-based, mobile, and distributed programming. The JCop programming language extends Java with language constructs for context-oriented programming and additionally provides a domain-specific aspect language for declarative control over runtime adaptations. As a result, these redesigned implementations are more concise and better modularized than their counterparts using plain COP. JCop's main features have been described in our previous publications. However, a complete language specification has not been presented so far. This report presents the entire JCop language including the syntax and semantics of its new language constructs.
Download or read book Vierter Deutscher IPv6 Gipfel 2011 written by Christoph Meinel and published by Universitätsverlag Potsdam. This book was released on 2012 with total page 122 pages. Available in PDF, EPUB and Kindle. Book excerpt: Am 1. und 2. Dezember 2011 fand am Hasso-Plattner-Institut für Softwaresystemtechnik GmbH in Potsdam der 4. Deutsche IPv6 Gipfel 2011 statt, dessen Dokumentation der vorliegende technische Report dient. Wie mit den vorhergegangenen nationalen IPv6-Gipfeln verfolgte der Deutsche IPv6-Rat auch mit dem 4. Gipfel, der unter dem Motto „Online on the Road - Der neue Standard IPv6 als Treiber der mobilen Kommunikation” stand, das Ziel, Einblicke in aktuelle Entwicklungen rund um den Einsatz von IPv6 diesmal mit einem Fokus auf die automobile Vernetzung zu geben. Gleichzeitig wurde betont, den effizienten und flächendeckenden Umstieg auf IPv6 voranzutreiben, Erfahrungen mit dem Umstieg auf und dem Einsatz von IPv6 auszutauschen, Wirtschaft und öffentliche Verwaltung zu ermutigen und motivieren, IPv6-basierte Lösungen einzusetzen und das öffentliche Problembewusstsein für die Notwendigkeit des Umstiegs auf IPv6 zu erhöhen. Ehrengast war in diesem Jahr die EU-Kommissarin für die Digitale Agenda, Neelie Kroes deren Vortrag von weiteren Beiträgen hochrangiger Vertretern aus Politik, Wissenschaft und Wirtschaft ergänzt wurde.
Download or read book Understanding Cryptic Schemata in Large Extract transform load Systems written by Alexander Albrecht and published by Universitätsverlag Potsdam. This book was released on 2013 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt: Extract-Transform-Load (ETL) tools are used for the creation, maintenance, and evolution of data warehouses, data marts, and operational data stores. ETL workflows populate those systems with data from various data sources by specifying and executing a DAG of transformations. Over time, hundreds of individual workflows evolve as new sources and new requirements are integrated into the system. The maintenance and evolution of large-scale ETL systems requires much time and manual effort. A key problem is to understand the meaning of unfamiliar attribute labels in source and target databases and ETL transformations. Hard-to-understand attribute labels lead to frustration and time spent to develop and understand ETL workflows. We present a schema decryption technique to support ETL developers in understanding cryptic schemata of sources, targets, and ETL transformations. For a given ETL system, our recommender-like approach leverages the large number of mapped attribute labels in existing ETL workflows to produce good and meaningful decryptions. In this way we are able to decrypt attribute labels consisting of a number of unfamiliar few-letter abbreviations, such as UNP_PEN_INT, which we can decrypt to UNPAID_PENALTY_INTEREST. We evaluate our schema decryption approach on three real-world repositories of ETL workflows and show that our approach is able to suggest high-quality decryptions for cryptic attribute labels in a given schema.
Download or read book MDE Settings in SAP written by Regina Hebig and published by Universitätsverlag Potsdam. This book was released on 2012 with total page 74 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Covering Or Complete written by Jana Bauckmann and published by Universitätsverlag Potsdam. This book was released on 2012 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Data dependencies, or integrity constraints, are used to improve the quality of a database schema, to optimize queries, and to ensure consistency in a database. In the last years conditional dependencies have been introduced to analyze and improve data quality. In short, a conditional dependency is a dependency with a limited scope defined by conditions over one or more attributes. Only the matching part of the instance must adhere to the dependency. In this paper we focus on conditional inclusion dependencies (CINDs). We generalize the definition of CINDs, distinguishing covering and completeness conditions. We present a new use case for such CINDs showing their value for solving complex data quality tasks. Further, we define quality measures for conditions inspired by precision and recall. We propose efficient algorithms that identify covering and completeness conditions conforming to given quality thresholds. Our algorithms choose not only the condition values but also the condition attributes automatically. Finally, we show that our approach efficiently provides meaningful and helpful results for our use case.
Download or read book Cyber physical Systems with Dynamic Structure written by Basil Becker and published by Universitätsverlag Potsdam. This book was released on 2012 with total page 40 pages. Available in PDF, EPUB and Kindle. Book excerpt: Cyber-physical systems achieve sophisticated system behavior exploring the tight interconnection of physical coupling present in classical engineering systems and information technology based coupling. A particular challenging case are systems where these cyber-physical systems are formed ad hoc according to the specific local topology, the available networking capabilities, and the goals and constraints of the subsystems captured by the information processing part. In this paper we present a formalism that permits to model the sketched class of cyber-physical systems. The ad hoc formation of tightly coupled subsystems of arbitrary size are specified using a UML-based graph transformation system approach. Differential equations are employed to define the resulting tightly coupled behavior. Together, both form hybrid graph transformation systems where the graph transformation rules define the discrete steps where the topology or modes may change, while the differential equations capture the continuous behavior in between such discrete changes. In addition, we demonstrate that automated analysis techniques known for timed graph transformation systems for inductive invariants can be extended to also cover the hybrid case for an expressive case of hybrid models where the formed tightly coupled subsystems are restricted to smaller local networks.
Download or read book Handbook of Graph Grammars and Computing by Graph Transformation written by Hartmut Ehrig and published by World Scientific. This book was released on 1999 with total page 480 pages. Available in PDF, EPUB and Kindle. Book excerpt: Graph grammars originated in the late 60s, motivated by considerations about pattern recognition and compiler construction. Since then, the list of areas which have interacted with the development of graph grammars has grown quite impressively. Besides the aforementioned areas, it includes software specification and development, VLSI layout schemes, database design, modeling of concurrent systems, massively parallel computer architectures, logic programming, computer animation, developmental biology, music composition, visual languages, and many others. The area of graph grammars and graph transformations generalizes formal language theory based on strings and the theory of term rewriting based on trees. As a matter of fact, within the area of graph grammars, graph transformation is considered a fundamental computation paradigm where computation includes specification, programming, and implementation. Over the last three decades, graph grammars have developed at a steady pace into a theoretically attractive and important-for-applications research field. Volume 3 of the 'indispensable Handbook of' Graph Grammars and Computing by Graph Transformations presents the research on concurrency, parallelism, and distribution -- important paradigms of modern science. The topics considered include semantics for concurrent systems, modeling of concurrency, mobile and coordinated systems, algebraic specifications, Petri nets, visual design of distributed systems, and distributed algorithms. The contributions have been written in a tutorial/survey style by the top experts.
Download or read book Software Engineering for Self Adaptive Systems written by Betty H. C. Cheng and published by Springer Science & Business Media. This book was released on 2009-06-19 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: The carefully reviewed papers in this state-of-the-art survey describe a wide range of approaches coming from different strands of software engineering, and look forward to future challenges facing this ever-resurgent and exacting field of research.
Download or read book Model Based Engineering of Collaborative Embedded Systems written by Wolfgang Böhm and published by Springer Nature. This book was released on 2020-12-14 with total page 404 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Open Access book presents the results of the "Collaborative Embedded Systems" (CrESt) project, aimed at adapting and complementing the methodology underlying modeling techniques developed to cope with the challenges of the dynamic structures of collaborative embedded systems (CESs) based on the SPES development methodology. In order to manage the high complexity of the individual systems and the dynamically formed interaction structures at runtime, advanced and powerful development methods are required that extend the current state of the art in the development of embedded systems and cyber-physical systems. The methodological contributions of the project support the effective and efficient development of CESs in dynamic and uncertain contexts, with special emphasis on the reliability and variability of individual systems and the creation of networks of such systems at runtime. The project was funded by the German Federal Ministry of Education and Research (BMBF), and the case studies are therefore selected from areas that are highly relevant for Germany’s economy (automotive, industrial production, power generation, and robotics). It also supports the digitalization of complex and transformable industrial plants in the context of the German government's "Industry 4.0" initiative, and the project results provide a solid foundation for implementing the German government's high-tech strategy "Innovations for Germany" in the coming years.