Download or read book Waste Incineration and Public Health written by National Research Council and published by National Academies Press. This book was released on 2000-10-21 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Incineration has been used widely for waste disposal, including household, hazardous, and medical wasteâ€"but there is increasing public concern over the benefits of combusting the waste versus the health risk from pollutants emitted during combustion. Waste Incineration and Public Health informs the emerging debate with the most up-to-date information available on incineration, pollution, and human healthâ€"along with expert conclusions and recommendations for further research and improvement of such areas as risk communication. The committee provides details on: Processes involved in incineration and how contaminants are released. Environmental dynamics of contaminants and routes of human exposure. Tools and approaches for assessing possible human health effects. Scientific concerns pertinent to future regulatory actions. The book also examines some of the social, psychological, and economic factors that affect the communities where incineration takes place and addresses the problem of uncertainty and variation in predicting the health effects of incineration processes.
Download or read book Waste Incineration Handbook written by Paul Cheremisinoff and published by Butterworth-Heinemann. This book was released on 2013-10-22 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste Incineration Handbook discusses the basic concepts and data on wastes combustion, including the management of waste incineration as a means to control pollution, as well as the process technologies involved. The book reviews the combustion principles such as fuel-to-air ratio, the products of combustion, material and thermal balances. Incineration produces emissions in the form of particulate matter, odorous or noxious gases. Conventional particle capturing devices use gravity settling, inertia or momentum, filtration or electrostatic precipitation, and agglomeration via sonic mechanical means to facilitate removal by increasing particle size. Secondary combustion with or without catalysts, and wet scrubbing control are methods to control or eliminate objectionable odors. The design and operation of an efficient incinerator is based on proper proportions of air and fuel; sufficient temperature; adequate furnace volume; constant maintenance of ignition temperatures; and minimized fly-ash entrainment. The text also discusses on-site incineration and incineration at sea. The book is suitable for economists, environmentalists, ecologists, marine ecologists, and policy makers involved in environmental preservation and pollution control.
Download or read book Incineration Technologies written by Alfons Buekens and published by Springer Science & Business Media. This book was released on 2013-01-04 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Waste incineration is the art of completely combusting waste, while maintaining or reducing emission levels below current emission standards. Where possible, objectives include the recovering of energy as well as the combustion residues. Successful waste incineration makes it possible to achieve a deep reduction in waste volume, obtain a compact and sterile residue, and eliminate a wide array of pollutants. This book places waste incineration within the wider context of waste management, and demonstrates that, in contrast to landfills and composting, waste incineration can eliminate objectionable and hazardous properties such as flammability and toxicity, result in a significant reduction in volume, and destroy gaseous and liquid waste streams leaving little or no residues beyond those linked to flue gas neutralization and treatment. Moreover, waste incineration sterilizes and destroys putrescible matter, and produces usable heat. Incineration Technologies first appeared as a peer-reviewed contribution to the Encyclopedia of Sustainability Science and Technology. It provides detailed treatment of the challenges of this technically complex process, which requires huge investment and operating costs, as well as good technical skills in maintenance and plant operation. Particular attention is paid to technologies for ensuring the complete burn-out of flue gas and residues and for controlling the resulting pollutants.
Download or read book Handbook of Waste Management and Co Product Recovery in Food Processing written by Keith W. Waldron and published by Elsevier. This book was released on 2007-03-31 with total page 683 pages. Available in PDF, EPUB and Kindle. Book excerpt: The intensification of agriculture and food production in recent years has led to an increase in the production of food co-products and wastes. Their disposal by incineration or landfill is often expensive as well as environmentally sensitive. Methods to valorise unused co-products and improve the management of wastes that cannot be reused, as well as techniques to reduce the quantity of waste produced in the first place, are increasingly important to the food industry. With its distinguished editor and array of international contributors, Waste management and co-product recovery in food processing reviews the latest developments in this area and describes how they can be used to reduce waste.The first section of the book provides a concise introduction to the field with a particular focus on legislation and consumer interests, principle drivers of waste management. Part two addresses the minimisation of biowaste and the optimisation of water and energy use in food processing. The third section covers key technologies for co-product separation and recovery, such as supercritical fluid extraction and membrane filtration, as well as important issues to consider when recovering co-products, such as waste stabilisation and microbiological risk assessment. Part four offers specific examples of waste management and co-product exploitation in particular sectors such as the red meat, poultry, dairy, fish and fruit and vegetable industries. The final part of the book summarises advanced techniques, to dispose of waste products that cannot be reused, and reviews state of the art technologies for wastewater treatment.Waste management and co-product recovery in food processing is a vital reference to all those in the food processing industry concerned with waste minimisation, co-product valorisation and end waste management. - Looks at the optimisation of manufacturing procedures to decrease waste, energy and water use - Explores methods to valorise waste by co-product recovery - Considers best practice in different sectors of the food industry
Download or read book Safe Management of Wastes from Health care Activities written by Yves Chartier and published by World Health Organization. This book was released on 2014 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the second edition of the WHO handbook on the safe, sustainable and affordable management of health-care waste--commonly known as "the Blue Book". The original Blue Book was a comprehensive publication used widely in health-care centers and government agencies to assist in the adoption of national guidance. It also provided support to committed medical directors and managers to make improvements and presented practical information on waste-management techniques for medical staff and waste workers. It has been more than ten years since the first edition of the Blue Book. During the intervening period, the requirements on generators of health-care wastes have evolved and new methods have become available. Consequently, WHO recognized that it was an appropriate time to update the original text. The purpose of the second edition is to expand and update the practical information in the original Blue Book. The new Blue Book is designed to continue to be a source of impartial health-care information and guidance on safe waste-management practices. The editors' intention has been to keep the best of the original publication and supplement it with the latest relevant information. The audience for the Blue Book has expanded. Initially, the publication was intended for those directly involved in the creation and handling of health-care wastes: medical staff, health-care facility directors, ancillary health workers, infection-control officers and waste workers. This is no longer the situation. A wider range of people and organizations now have an active interest in the safe management of health-care wastes: regulators, policy-makers, development organizations, voluntary groups, environmental bodies, environmental health practitioners, advisers, researchers and students. They should also find the new Blue Book of benefit to their activities. Chapters 2 and 3 explain the various types of waste produced from health-care facilities, their typical characteristics and the hazards these wastes pose to patients, staff and the general environment. Chapters 4 and 5 introduce the guiding regulatory principles for developing local or national approaches to tackling health-care waste management and transposing these into practical plans for regions and individual health-care facilities. Specific methods and technologies are described for waste minimization, segregation and treatment of health-care wastes in Chapters 6, 7 and 8. These chapters introduce the basic features of each technology and the operational and environmental characteristics required to be achieved, followed by information on the potential advantages and disadvantages of each system. To reflect concerns about the difficulties of handling health-care wastewaters, Chapter 9 is an expanded chapter with new guidance on the various sources of wastewater and wastewater treatment options for places not connected to central sewerage systems. Further chapters address issues on economics (Chapter 10), occupational safety (Chapter 11), hygiene and infection control (Chapter 12), and staff training and public awareness (Chapter 13). A wider range of information has been incorporated into this edition of the Blue Book, with the addition of two new chapters on health-care waste management in emergencies (Chapter 14) and an overview of the emerging issues of pandemics, drug-resistant pathogens, climate change and technology advances in medical techniques that will have to be accommodated by health-care waste systems in the future (Chapter 15).
Download or read book Sludge Treatment and Disposal written by Cleverson Vitorio Andreoli and published by IWA Publishing. This book was released on 2007-03-30 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sludge Treatment and Disposal is the sixth volume in the series Biological Wastewater Treatment. The book covers in a clear and informative way the sludge characteristics, production, treatment (thickening, dewatering, stabilisation, pathogens removal) and disposal (land application for agricultural purposes, sanitary landfills, landfarming and other methods). Environmental and public health issues are also fully described. About the series: The series is based on a highly acclaimed set of best selling textbooks. This international version is comprised by six textbooks giving a state-of-the-art presentation of the science and technology of biological wastewater treatment. Other titles in the series are: Volume 1: Waste Stabilisation Ponds; Volume 2: Basic Principles of Wastewater Treatment; Volume 3: Waste Stabilization Ponds; Volume 4: Anaerobic Reactors; Volume 5: Activated Sludge and Aerobic Biofilm Reactors
Download or read book Environmental Geochemistry written by Benedetto DeVivo and published by Elsevier. This book was released on 2017-09-18 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: Environmental Geochemistry: Site Characterization, Data Analysis and Case Histories, Second Edition, reviews the role of geochemistry in the environment and details state-of-the-art applications of these principles in the field, specifically in pollution and remediation situations. Chapters cover both philosophy and procedures, as well as applications, in an array of issues in environmental geochemistry including health problems related to environment pollution, waste disposal and data base management. This updated edition also includes illustrations of specific case histories of site characterization and remediation of brownfield sites. - Covers numerous global case studies allowing readers to see principles in action - Explores the environmental impacts on soils, water and air in terms of both inorganic and organic geochemistry - Written by a well-respected author team, with over 100 years of experience combined - Includes updated content on: urban geochemical mapping, chemical speciation, characterizing a brownsfield site and the relationship between heavy metal distributions and cancer mortality
Download or read book Hazardous Waste Incineration Calculations written by Joseph Reynolds and published by Wiley-Interscience. This book was released on 1991-06-26 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: This novel approach to textbook publication is made up of a book plus a computer diskette. The book contributes to the ability of environmental engineers to solve hazardous waste incineration problems by presenting almost 100 specific problems and their solutions. It also contains a user's guide to software provided on the diskette. The diskette itself contains procedures that provide thermochemical calculations relating to waste incineration, stoichiometric calculations of incinerator emissions and incinerator design.
Download or read book The Zero Waste Solution written by Paul Connett and published by Chelsea Green Publishing. This book was released on 2013 with total page 3 pages. Available in PDF, EPUB and Kindle. Book excerpt: "How cities and towns around the world are saying no to incinerators and wasteful product design and yes to radical recycling, reuse entrepreneurs, and the jobs they create"--Cover.
Download or read book Combustion and Incineration Processes written by Walter R. Niessen and published by CRC Press. This book was released on 2002-02-28 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Covering each aspect of an incineration facility, from contaminant receipt and storage to stack discharge and dispersion, this reference explores the operation and evaluation of incineration systems for hazardous and non-hazardous gaseous, liquid, sludge, and solid wastes. Highlighting breakthroughs in air pollution control, the book discusses advances in materials handling, waste processing, refractory and materials engineering, combustion technology, and energy recovery to reduce and control toxins and pollutants in the environment. It includes a disk containing spreadsheets for practical analyses of waste characteristics and combustion systems.
Download or read book Municipal Solid Waste Incinerator Residues written by A.J. Chandler and published by Elsevier. This book was released on 1997-04-09 with total page 1009 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text covers a broad spectrum of topics pertinent to the management of incinerator residues. Background information includes a history of incineration, and the influence of municipal waste composition, incinerator type air pollution control technologies on residue quality. Physical, chemical and leaching characteristics for the various ash streams are described, along with recommended sampling and evaluation methodologies. Residue handling and management options, including, treatment utilisation and disposal are also discussed in detail.
Download or read book Stop Garbage The Truth about Recycling written by Alex Pascual and published by Independently Published. This book was released on 2019-02-28 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: #1 Bestseller in waste management Stop Garbage sheds some light on the world of waste and recycling, topics often filled with questions for most readers. Do we really know why it's important to recycle and the consequences of not doing it? What environmental impact does our behavior have? What trends will prevail in waste management during the next decade? Far from being a technical book, Stop Garbage introduces us to the field of waste and recycling in a clear and enjoyable way. It deals with garbage or waste, whatever you want to call it, but in it you will also find a kidnapping, a destroyer, successes, food waste, the biggest dump in the world, the first incinerator, questions about money and employment or riddles: how many times can you fill the Camp Nou Stadium with one year's waste? How many trees do we save from felling if we recycle paper? What's the best waste in the world? Added to this, multimedia content, articles and videos make up a didactic book of reading which is, without a shadow of a doubt, entertaining. After years of experience in the sector, Alex Pascual (Barcelona, 1976) brings us closer to the key concepts that can help us to formulate our own opinion on the subject. A book full of vital data as well as funny anecdotes that will trigger successive reflections on waste management, undoubtedly one of the pillars of the contemporary and future commitment to the environment. About the author Industrial Engineer specialist in waste management, street cleaning and public services. He has been working in the private sector for many years and now, after more than nine years works as a public services chief for a city council. He also writes on a blog about the same subject www.stopgarbage.com, Twitter profile @stopbasura1 and on Instagram as @stopbasura. Readers reviews " It is a very affordable book for anyone who wants to know how the recycling system works in Spain. With a simple language and away from the technicalities, step by step the writer introduces you to why it is important to recycle, the main magnitudes in our country and the recycling process of each container ." Nicolás "This is a good book to understand the garbage and what represents in our society. It is impressive to read the data and interpretation that the author gives us ..."Luis "Very good book, practical, with a surprising data that reveals and the clarity of the explanation. Despite containing a large amount of information, its reading is enjoyable and facilitated by numerous graphics, links to websites, etc. The book really opens your eyes to the world of recycling! Highly recommended. "Dani
Download or read book Hazardous Material Incinerator Design Criteria written by L. Manson and published by . This book was released on 1979 with total page 116 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Biosafety in the Laboratory written by Division on Engineering and Physical Sciences and published by National Academies Press. This book was released on 1989-01-01 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Biosafety in the Laboratory is a concise set of practical guidelines for handling and disposing of biohazardous material. The consensus of top experts in laboratory safety, this volume provides the information needed for immediate improvement of safety practices. It discusses high- and low-risk biological agents (including the highest-risk materials handled in labs today), presents the "seven basic rules of biosafety," addresses special issues such as the shipping of dangerous materials, covers waste disposal in detail, offers a checklist for administering laboratory safetyâ€"and more.
Download or read book Renewable Energy Systems written by Martin Kaltschmitt and published by Springer. This book was released on 2012-12-06 with total page 1898 pages. Available in PDF, EPUB and Kindle. Book excerpt: Humanity is facing a steadily diminishing supply of fossil fuels, causing researchers, policy makers, and the population as a whole to turn increasingly to alternative and especially renewable sources of energy to make up this deficit. Gathering over 80 peer-reviewed entries from the Encyclopedia of Sustainability Science and Technologies, Renewable Energy Systems provides an authoritative introduction to a wide variety of renewable energy sources. State-of-the-art coverage includes geothermal power stations, ocean energy, renewable energy from biomass, waste to energy, and wind power. This comprehensive, two-volume work provides an excellent introduction for those entering these fields, as well as new insights for advanced researchers, industry experts, and decision makers.
Download or read book Utilization of By Products and Treatment of Waste in the Food Industry written by Vasso Oreopoulou and published by Springer Science & Business Media. This book was released on 2006-11-23 with total page 322 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the third volume of the ISEKI-Food book series. It deals with the main features of utilization of the food industry waste, defined thereby as by-product, and the treatments necessary to discard waste to environmental acceptors. It discusses the utilization of byproducts of plants and fish, and presents case studies on waste treatment in the food industry.
Download or read book Pollution Control Technology for Leachate from Municipal Solid Waste written by Zhao Youcai and published by Butterworth-Heinemann. This book was released on 2018-07-21 with total page 575 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pollution Control Technology for Leachate from Municipal Solid Waste explores the physical, chemical and biological factors that produce leachate and technological solutions for its control. The book introduces the integrated and pre-treatment leachate treatment processes that are necessary to deal with the variations of pollutants in leachate. Real world case-studies are provided to illustrate these treatment processes, along with leachate treatment engineering process design and the construction of municipal solid waste incinerator power plants. This book will be of particular interest to Civil, Chemical and Environmental Engineers, but will also be ideal for Environmental Scientists. - Provides quantity and quality prediction models, along with properties of effluent concentrated leachate liquid - Includes physical and chemical treatment processes for leachate, including ammonia nitrogen removal using struvite precipitation, crystal variation and microstructure of the struvite, etc. - Covers leachate treatment engineering processes for design and construction of treatment plants
