Download or read book In situ Testing and Its Application to Foundation Engineering written by Peter Kay Robertson and published by . This book was released on 1985 with total page 121 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book In Situ Testing Methods in Geotechnical Engineering written by Alan J. Lutenegger and published by CRC Press. This book was released on 2021-05-03 with total page 370 pages. Available in PDF, EPUB and Kindle. Book excerpt: In Situ Testing Methods in Geotechnical Engineering covers the field of applied geotechnical engineering related to the use of in situ testing of soils to determine soil properties and parameters for geotechnical design. It provides an overview of the practical aspects of the most routine and common test methods, as well as test methods that engineers may wish to include on specific projects. It is suited for a graduate-level course on field testing of soils and will also aid practicing engineers. Test procedures for determining in situ lateral stress, strength, and stiffness properties of soils are examined, as is the determination of stress history and rate of consolidation. Readers will be introduced to various approaches to geotechnical design of shallow and deep foundations using in situ tests. Importantly, the text discusses the potential advantages and disadvantages of using in situ tests.
Download or read book In Situ Tests in Geotechnical Engineering written by Jacques Monnet and published by John Wiley & Sons. This book was released on 2015-12-07 with total page 398 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book deals with in-situ tests that are performed in geotechnics to identify and characterize the soil. These measurements are then used to size the Civil Engineering works This book is intended for engineers, students and geotechnical researchers. It provides useful information for use and optimal use of in-situ tests to achieve a better book adaptation of civil engineering on the ground
Download or read book Geotechnical Engineering written by Jean-Louis Briaud and published by John Wiley & Sons. This book was released on 2013-10-02 with total page 1783 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by a leader on the subject, Introduction to Geotechnical Engineering is first introductory geotechnical engineering textbook to cover both saturated and unsaturated soil mechanics. Destined to become the next leading text in the field, this book presents a new approach to teaching the subject, based on fundamentals of unsaturated soils, and extending the description of applications of soil mechanics to a wide variety of topics. This groundbreaking work features a number of topics typically left out of undergraduate geotechnical courses.
Download or read book Piezocone and Cone Penetration Test CPTu and CPT Applications in Foundation Engineering written by Abolfazl Eslami and published by Butterworth-Heinemann. This book was released on 2019-11-23 with total page 392 pages. Available in PDF, EPUB and Kindle. Book excerpt: Piezocone and cone penetration tests (CPTu and CPT) applications in foundation engineering includes different approaches for determining the bearing capacity of shallow foundations, along with methods for determining pile bearing capacity and settlement concepts. The use of soft computing (GMDH) neural networks related to CPT records and Geotechnical parameters are also discussed. In addition, different cases regarding the behavior of foundation performance using case records, such as shallow foundation, deep soil improvement, soil behavior classification (SBC), and bearing capacity are also included. - Provides the latest on CPT and CPTu performance in geotechnical engineering, i.e., bearing capacity, settlement, liquefaction, soil classification and shear strength prediction - Introduces soft computing methods for processing soil properties and pile bearing capacity via CPT and CPTu - Explains CPT and CPTu testing methods which allows for the continuous, or virtually continuous, record of ground conditions
Download or read book In situ Testing and Its Application to Geotechnical Engineering written by and published by . This book was released on 1992 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Foundation Engineering Handbook written by Manjriker Gunaratne and published by CRC Press. This book was released on 2006-01-13 with total page 625 pages. Available in PDF, EPUB and Kindle. Book excerpt: Great strides have been made in the art of foundation design during the last two decades. In situ testing, site improvement techniques, the use of geogrids in the design of retaining walls, modified ACI codes, and ground deformation modeling using finite elements are but a few of the developments that have significantly advanced foundation engineering in recent years. What has been lacking, however, is a comprehensive reference for foundation engineers that incorporates these state-of-the-art concepts and techniques. The Foundation Engineering Handbook fills that void. It presents both classical and state-of-the-art design and analysis techniques for earthen structures, and covers basic soil mechanics and soil and groundwater modeling concepts along with the latest research results. It addresses isolated and shallow footings, retaining structures, and modern methods of pile construction monitoring, as well as stability analysis and ground improvement methods. The handbook also covers reliability-based design and LRFD (Load Resistance Factor Design)-concepts not addressed in most foundation engineering texts. Easy-to-follow numerical design examples illustrate each technique. Along with its unique, comprehensive coverage, the clear, concise discussions and logical organization of The Foundation Engineering Handbook make it the one quick reference every practitioner and student in the field needs.
Download or read book Correlations of Soil and Rock Properties in Geotechnical Engineering written by Jay Ameratunga and published by Springer. This book was released on 2015-12-11 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a one-stop reference to the empirical correlations used extensively in geotechnical engineering. Empirical correlations play a key role in geotechnical engineering designs and analysis. Laboratory and in situ testing of soils can add significant cost to a civil engineering project. By using appropriate empirical correlations, it is possible to derive many design parameters, thus limiting our reliance on these soil tests. The authors have decades of experience in geotechnical engineering, as professional engineers or researchers. The objective of this book is to present a critical evaluation of a wide range of empirical correlations reported in the literature, along with typical values of soil parameters, in the light of their experience and knowledge. This book will be a one-stop-shop for the practising professionals, geotechnical researchers and academics looking for specific correlations for estimating certain geotechnical parameters. The empirical correlations in the forms of equations and charts and typical values are collated from extensive literature review, and from the authors' database.
Download or read book Use of in Situ Tests in Geotechnical Engineering written by Samuel P. Clemence and published by Amer Society of Civil Engineers. This book was released on 1986-01-01 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Canadian Foundation Engineering Manual written by Canadian Geotechnical Society and published by Richmond, B.C. : Canadian Geotechnical Society. This book was released on 1992 with total page 512 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Craig s Soil Mechanics written by Jonathan Knappett and published by CRC Press. This book was released on 2019-10-11 with total page 598 pages. Available in PDF, EPUB and Kindle. Book excerpt: Craig’s Soil Mechanics continues to evolve and remain the definitive text for civil engineering students worldwide. It covers fundamental soil mechanics and its application in applied geotechnical engineering from A to Z and at the right depth for an undergraduate civil engineer, with sufficient extension material for supporting MSc level courses, and with practical examples and digital tools to make it a useful reference work for practising engineers. This new edition now includes: Restructured chapters on foundations and earthworks, the latter including new material on working platforms and collapse of underground cavities (sinkhole formation). New mobilised-stress-based deformation methods that can straightforwardly be used with both linear and non-linear soil stiffness models and field measurements of shear wave velocity, for serviceability limit state design. Extended sets of correlations for making sensible first estimates of soil parameters, adding deformation-based parameters for broader coverage than the Eighth Edition. Extended section on robust statistical selection of characteristic soil parameters. Greater use of consolidation theory throughout in determining whether actions, processes and laboratory/in-situ tests are drained or undrained. Extended chapter on in-situ testing, adding the Flat Dilatometer Test (DMT), and interpretation of consolidation parameters from CPTU and DMT testing. An updated section on pile load testing. Additional worked examples and end-of-chapter problems covering new material, with fully worked solutions for lecturers. The electronic resources on the book’s companion website are developed further, with the addition of two new spreadsheet numerical analysis tools and improvement of existing tools from the Eighth Edition. Using these, readers can take real soil test data, interpret its mechanical properties and apply these to a range of common geotechnical design problems at ultimate and serviceability limiting states.
Download or read book In situ Characterization of Soils written by K.R. Saxena and published by CRC Press. This book was released on 2003-01-01 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: The papers included in this book describe various in-situ tests, routine and soil-specific, being used in various countries. The work opens new vistas of improvement in in-situ tests for soils to suit certain specific soil-structure interaction and designed performance of structure
Download or read book Deep Foundations and Geotechnical in Situ Testing written by Robert Y. Liang and published by Amer Society of Civil Engineers. This book was released on 2010 with total page 396 pages. Available in PDF, EPUB and Kindle. Book excerpt: Geoenvironmental Engineering and Geotechnics: Progress in Modeling and Applications (GSP 204), presents 39 papers that represent the latest developments in the application of soil, rock, and groundwater mechanics in geotechnical engineering modeling and practice including: the relationship between geotechnical engineering and sustainability; new evidence and research into the strength and deformational behavior of soil; and recent advances in characterization and modeling of groundwater flow in geological formations of diverse geotechnical properties. This Geotechnical Special Publication examines these and other important areas of geotechnical engineering using three main categories: Geoenvironmental Engineering, Geotechnics and Seepage and Porous Mechanics. These papers were presented at the GeoShanghai 2010 Conference, sponsored by the Geo-Institute of the American Society of Civil Engineers, held in Shanghai, China, June 3 5, 2010.
Download or read book In Situ Testing and Its Application to Foundation Analysis for Fine grained Unsaturated Soils written by Rodney Wotherspoon Collins and published by . This book was released on 2016 with total page 434 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Foundation Engineering in the Face of Uncertainty written by Fred H. Kulhawy and published by . This book was released on 2013 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: WIDTH: 405pt; BORDER-COLLAPSE: collapse border=0 cellSpacing=0 cellPadding=0 width=540> WIDTH: 405pt; mso-width-source: userset; mso-width-alt: 19748 width=540> HEIGHT: 31.5pt height=42> BORDER-BOTTOM: #f0f0f0; BORDER-LEFT: #f0f0f0; BACKGROUND-COLOR: transparent; WIDTH: 405pt; HEIGHT: 31.5pt; BORDER-TOP: #f0f0f0; BORDER-RIGHT: #f0f0f0 class=xl65 height=42 width=540>GSP 229 contains 54 papers on risk and uncertainty in foundation engineering presented in honor of Fred H. Kulhawy.
Download or read book Dynamic Geotechnical Testing II written by Ronald J. Ebelhar and published by ASTM International. This book was released on 1994 with total page 433 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Use of in Situ Tests for Foundation Design on Clay written by and published by . This book was released on 1986 with total page 34 pages. Available in PDF, EPUB and Kindle. Book excerpt:
