Download or read book In Situ Combustion with Metallic Additives SUPRI TR 87 written by and published by . This book was released on 1992 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: In-situ combustion is the most energy efficient of the thermal oil recovery methods. In this process, a portion of a reservoir's oil is burned in-situ as fuel to drive the recovery process. In light oil reservoirs, too little fuel may be deposited, making sustained combustion difficult. In heavy oil reservoirs, too much fuel may be deposited leading to high air injection requirements and unfavorable economics. This study has been designed to attack these problems. Water soluble metallic additives are investigated as agents to modify fuel deposition and combustion performance. This report describes seven combustion tube runs using two cradle oils and two metallic additives. The oils are 12° and 34° API, both from Cymric (California). The metallic additives tested are ionic nitrate (Fe(NO3)39H2O) and zinc nitrate (Zn(NO3)26H2O). Iron and tin additives improved the combustion efficiency in all cases. Fluctuations in the produced gas compositions were observed in all control runs, but nearly disappeared with the iron and tin additives. The combustion front velocities were also increased by iron and tin. Changes were also observed in the apparent hydrogen to carbon (H/C) ratio of the fuel, heat of combustion, air requirements, and amount of fuel deposited. Iron and tin caused increases in fuel concentration while causing a decrease in air requirement. The increase in fuel concentration varied between the oils, however, tin and iron were consistently more effective than zinc. A particularly interesting result occurred with the Cymric light oil. In the control runs, a sustained combustion front was not achieved, while in the iron additive runs, stable, sustained combustion was achieved. Iron and tin salts are suitable additives to increase fuel deposition when that is needed. Additives suitable for use as a fuel reducing agent have not yet been found. 26 refs., 23 figs, 6 tabs.

Download or read book Effect of Metallic Additives on in Situ Combustion of Huntington Beach Crude Experiments SUPRI TR 78 written by and published by . This book was released on 1990 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Energy Research Abstracts written by and published by . This book was released on 1993 with total page 754 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effect of Metallic Additives on In situ Combustion of Huntington Beach Crude written by Christopher Joseph Baena and published by . This book was released on 1990 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Effect of Metallic Additives on In situ Combustion of Huntington Beach Crude Experiments written by Stanford University. Petroleum Research Institute and published by . This book was released on 1990 with total page 77 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book List of BPO Publications written by Bartlesville Project Office and published by . This book was released on 1988 with total page 28 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Metallic Additives on the Kinetics of Oil Oxidation Reactions in In sitz Combustion written by C. F. De los Rios and published by . This book was released on 1988 with total page 92 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Petroleum Abstracts written by and published by . This book was released on 1993 with total page 1752 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book The Effect of Metallic Additives on the Kinetics of Oil Oxidation Reactions in In situ Combustion written by Carlos Fernando De los Rios and published by . This book was released on 1987 with total page 226 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Kinetics of Crude oil Combustion in Porous Media Interpreted Using Isoconversional Methods written by Murat Cinar and published by Stanford University. This book was released on 2011 with total page 377 pages. Available in PDF, EPUB and Kindle. Book excerpt: One method to access unconventional, heavy-oil and natural bitumen resources as well as waterflood residual oil is to apply in situ combustion (ISC) to oxidize in place a small fraction of the hydrocarbon thereby providing heat to reduce oil viscosity and pressure that enhances recovery. ISC is also attractive because it provides the opportunity to upgrade oil in-situ by increasing the API gravity and decreasing, for instance, sulfur content. Experimental analysis of crude-oil oxidation kinetics provides parameters, such as activation energy, for modeling and optimization of ISC processes. The complex nature of petroleum as a multi-component mixture and multi-step character of oxidation reactions complicates substantially the kinetic analysis of crude-oil. Isoconversional techniques provide model-free methods for estimating activation energy and naturally deconvolve multi-step reactions. In addition, isoconversional methods are also useful as a screening tool to recognize the burning characteristics of different oils. By using experimentally determined combustion kinetics of different oil samples along with combustion tube results, we show that isoconversional analysis of ramped temperature oxidation data is useful to predict combustion-front propagation. It also provides new insight into the nature of the reactions occurring during ISC. Ramped temperature oxidation (RTO) tests with effluent gas analysis are conducted to probe ISC reaction kinetics along with isothermal coke formation experiments. The role of oxygen during coke formation reactions (i.e., fuel formation for ISC) is investigated using X-ray photoelectron spectroscopy (XPS) of intermediate reaction products. The XPS data is analyzed along with companion RTO experiments to obtain a simplified multi-step reaction scheme. Synthetic cases illustrate the connection between a proposed reaction scheme for oil/matrix pairs and one-dimensional combustion front propagation. Analysis of experimental results illustrate that the reaction scheme is capable of reproducing experimental results including the basic trends in oxygen consumption and carbon oxides production for RTO experiments as a function of heating rate for both good and poor ISC candidates. The combination of XPS and RTO studies indicates that the quality (or reactivity) of coke formed during the process is a function of oxygen presence/absence.

Download or read book Government Reports Announcements Index written by and published by . This book was released on 1993 with total page 1258 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Government Reports Annual Index written by and published by . This book was released on 1993 with total page 1290 pages. Available in PDF, EPUB and Kindle. Book excerpt: Sections 1-2. Keyword Index.--Section 3. Personal author index.--Section 4. Corporate author index.-- Section 5. Contract/grant number index, NTIS order/report number index 1-E.--Section 6. NTIS order/report number index F-Z.

Download or read book Materials Design and Manufacturing for Sustainable Environment written by Santhakumar Mohan and published by Springer Nature. This book was released on 2021-02-06 with total page 909 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the select proceedings of the International Conference on Materials, Design and Manufacturing for Sustainable Environment (ICMDMSE 2020). The primary focus is on emerging materials and cutting-edge manufacturing technologies for sustainable environment. The book covers a wide range of topics such as advanced materials, vibration, tribology, finite element method (FEM), heat transfer, fluid mechanics, energy engineering, additive manufacturing, robotics and automation, automobile engineering, industry 4.0, MEMS and nanotechnology, optimization techniques, condition monitoring, and new paradigms in technology management. Contents of this book will be useful to students, researchers, and practitioners alike.

Download or read book Polyvinylchloride based Blends written by Visakh P. M. and published by Springer Nature. This book was released on 2021-09-23 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book summarizes many of the recent research accomplishments in the area of polyvinylchloride (PVC)-based blends and their preparation, characterization and applications. Various sub-topics are addressed, such as the state-of-the-art of PVC based blends, new challenges and opportunities, emphasis being given to the types and sizes of components/fillers and optimum compositions of PVC blends, their processing and structure-properties relationships, modification/compatibilization methods, and possible applications. PVC/thermoplastic based nano, micro and macro blends, PVC membranes, bio-based plasticizers and PVC blends with components from renewable resources are reported. The various chapters in this book are contributed by prominent researchers from industry, academia and government/private research laboratories across the globe. It covers an up-to-date record on the major findings and observations in the field of PVC-based blends.

Download or read book Commercial scale demonstration enhanced oil recovery by micellar polymer flood written by Marathon Oil Company and published by . This book was released on 1978 with total page 88 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Elastomers I written by P. M. Visakh and published by Springer Science & Business Media. This book was released on 2013-03-29 with total page 497 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is the first volume of a two-volume work which summarizes in an edited format and in a fairly comprehensive manner many of the recent technical research accomplishments in the area of Elastomers. “Advances in Elastomers” discusses the various attempts reported on solving these problems from the point of view of the chemistry and the structure of elastomers, highlighting the drawbacks and advantages of each method. It summarize the importance of elastomers and their multiphase systems in human life and industry, and covers all the topics related to recent advances in elastomers, their blends, IPNs, composites and nanocomposites. This first volume focuses on advances on the blends and interpenetrating networks (IPNs) of elastomers.

Download or read book Recycling of Plastics Metals and Their Composites written by R.A. Ilyas and published by CRC Press. This book was released on 2021-12-27 with total page 541 pages. Available in PDF, EPUB and Kindle. Book excerpt: Having a solid understanding of materials recycling is of high importance, especially due to the growing use of composites in many industries and increasingly strict legislation and concerns about the disposal of composites in landfills or by incineration. Recycling of Plastics, Metals, and Their Composites provides a comprehensive review of the recycling of waste polymers and metal composites. It provides the latest advances and covers the fundamentals of recycled polymers and metal composites, such as preparation, morphology, and physical, mechanical, thermal, and flame-retardancy properties. FEATURES Offers a state-of-the-art review of the recycling of polymer composites and metal composites for sustainability Describes a life-cycle analysis to help readers understand the true potential value and market for these recycled materials Details potential applications of recycled polymer and metal composites Includes the performance of natural fiber–reinforced recycled thermoplastic polymer composites under aging conditions and the recycling of multi-material plastics Covers recycling technologies, opportunities, and challenges for polymer-matrix composites This book targets technical professionals in the metal and polymer industries as well as researchers, scientists, and advanced students. It is also of interest to decision makers at material suppliers, recycled metal and polymer product manufacturers, and governmental agencies working with recycled metal and polymer composites.