Download or read book Improvement of Static and Dynamic Properties of Soft Clay Using High Pressure Jet Grout written by Ramakumar Vedula and published by . This book was released on 1995 with total page 96 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Ground Improvement written by Professor Jian Chu and published by Elsevier. This book was released on 2005-11-07 with total page 1137 pages. Available in PDF, EPUB and Kindle. Book excerpt: - The first book of its kind, providing over thirty real-life case studies of ground improvement projects selected by the worlds top experts in ground improvement from around the globe. - Volume 3 of the highly regarded Elsevier Geo-engineering book series coordinated by the Series Editor: Professor John A Hudson FREng. - An extremely reader friendly chapter format. - Discusses wider economical and environmental issues facing scientists in the ground improvement.Ground improvement has been both a science and art, with significant developments observed through ancient history. From the use of straw as blended infill with soils for additional strength during the ancient Roman civilizations, and the use of elephants for compaction of earth dams during the early Asian civilizations, the concepts of reinforced earth with geosynthetics, use of electrokinetics and thermal modifications of soils have come a long way. The use of large and stiff stone columns and subsequent sand drains in the past has now been replaced by quicker to install and more effective prefabricated vertical drains, which have also eliminated the need for more expensive soil improvement methods.The early selection and application of the most appropriate ground improvement techniques can improve considerably not only the design and performance of foundations and earth structures, including embankments, cut slopes, roads, railways and tailings dams, but also result in their cost-effectiveness. Ground improvement works have become increasingly challenging when more and more problematic soils and marginal land have to be utilized for infrastructure development.This edited compilation contains a collection of Chapters from invited experts in various areas of ground improvement, who have illustrated the basic concepts and the applications of different ground improvement techniques using real projects that they have been involved in. The case histories from many countries ranging from Asia, America, Australia and Europe are addressed.
Download or read book Improvement of Dynamic Properties and Seismic Response of Clay Using Fiber Reinforcement written by Behzad Amir Faryar and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Jet Grouting written by Paolo Croce and published by CRC Press. This book was released on 2014-02-26 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Unlike similar titles providing general information on ground improvement, Jet Grouting: Technology, Design and Control is entirely devoted to the role of jet grouting – its methods and equipment, as well as its applications. It discusses the possible effects of jet grouting on different soils and examines common drawbacks, failures and disadvantages, recent advances, critical reviews, and the range of applications, illustrated with relevant case studies. The book addresses several topics involving this popular worldwide practice including technology issues, the interpretation of the mechanisms taking place during the grouting, the quantitative prediction of their effects, the design of jet-grouted structures, and procedures for controlling jet grouting results. Discusses the design criteria for jet grouting projects and reviews existing design rules and codes of practice of different countries Provides practical methods for design calculations of the most important jet-grouted structures such as foundations, earth retaining walls, water cut-offs, bottom plugs, and provisional tunnel supports Includes the current standard control methods and most innovative techniques reported for the implementation of quality control and quality assurance procedures Jet Grouting: Technology, Design and Control analyzes the typical jet-grouted structures, such as foundations, earth retaining walls, water cut-offs, bottom plugs and tunnel supports, and serves as a practical manual for the correct use of jet grouting technology.
Download or read book Principles and Practice of Ground Improvement written by Jie Han and published by John Wiley & Sons. This book was released on 2015-06-22 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain a stronger foundation with optimal ground improvement Before you break ground on a new structure, you need to analyze the structure of the ground. Expert analysis and optimization of the geo-materials on your site can mean the difference between a lasting structure and a school in a sinkhole. Sometimes problematic geology is expected because of the location, but other times it's only unearthed once construction has begun. You need to be able to quickly adapt your project plan to include an improvement to unfavorable ground before the project can safely continue. Principles and Practice of Ground Improvement is the only comprehensive, up-to-date compendium of solutions to this critical aspect of civil engineering. Dr. Jie Han, registered Professional Engineer and preeminent voice in geotechnical engineering, is the ultimate guide to the methods and best practices of ground improvement. Han walks you through various ground improvement solutions and provides theoretical and practical advice for determining which technique fits each situation. Follow examples to find solutions to complex problems Complete homework problems to tackle issues that present themselves in the field Study design procedures for each technique to simplify field implementation Brush up on modern ground improvement technologies to keep abreast of all available options Principles and Practice of Ground Improvement can be used as a textbook, and includes Powerpoint slides for instructors. It's also a handy field reference for contractors and installers who actually implement plans. There are many ground improvement solutions out there, but there is no single right answer to every situation. Principles and Practice of Ground Improvement will give you the information you need to analyze the problem, then design and implement the best possible solution.
Download or read book Grouting and Deep Mixing written by Donald A. Bruce and published by . This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: GSP 228 contains contains 189 peer-reviewed papers focusing on the science and technology of grouting that were presented at the Fourth International Conference on Grouting and Deep Mixing, held in New Orleans, Louisiana, February 15-18, 2012.
Download or read book The Deep Mixing Method written by Masaki Kitazume and published by CRC Press. This book was released on 2013-02-21 with total page 436 pages. Available in PDF, EPUB and Kindle. Book excerpt: The Deep Mixing Method (DMM), a deep in-situ soil stabilization technique using cement and/or lime as a stabilizing agent, was developed in Japan and in the Nordic countries independently in the 1970s. Numerous research efforts have been made in these areas investigating properties of treated soil, behavior of DMM improved ground under static and d
Download or read book Ground Improvement Third Edition written by Klaus Kirsch and published by CRC Press. This book was released on 2012-11-26 with total page 515 pages. Available in PDF, EPUB and Kindle. Book excerpt: When finding another location, redesigning a structure, or removing troublesome ground at a project site are not practical options, prevailing ground conditions must be addressed. Improving the ground—modifying its existing physical properties to enable effective, economic, and safe construction—to achieve appropriate engineering performance is an increasingly successful approach. This third edition of Ground Improvement provides a comprehensive overview of the major ground improvement techniques in use worldwide today. Written by recognized experts who bring a wealth of knowledge and experience to bear on their contributions, the chapters are fully updated with recent developments including advancements in equipment and methods since the last edition. The text provides an overview of the processes and the key geotechnical and design considerations as well as equipment needed for successful execution. The methods described are well illustrated with relevant case histories and include the following approaches: Densification using deep vibro techniques or dynamic compaction Consolidation employing deep fabricated drains and associated methods Injection techniques, such as permeation and jet grouting, soil fracture grouting, and compaction grouting New in-situ soil mixing processes, including trench-mixing TRD and panel-mixing CSM approaches The introductory chapter touches on the historical development, health and safety, greenhouse gas emissions, and two less common techniques: blasting and the only reversible process, ground freezing. This practical and established guide provides readers with a solid basis for understanding and further study of the most widely used processes for ground improvement. It is particularly relevant for civil and geotechnical engineers as well as contractors involved in piling and ground engineering of any kind. It would also be useful for advanced graduate and postgraduate civil engineering and geotechnical students.
Download or read book Excavations and Foundations in Soft Soils written by Hans-Georg Kempfert and published by Springer Science & Business Media. This book was released on 2006-07-01 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book reviews recent developments and research results on excavations and foundations found in and on soft soil deposits. It gives an overview of the material properties of soft soils and offers new foundation improvement techniques in road and railways. It also examines different types of foundations and stabilization methods. The book will serve both practicing and research engineers in the field of geotechnical engineering.
Download or read book Grouting Theory and Practice written by E. Nonveiller and published by Elsevier Health Sciences. This book was released on 1989-05 with total page 268 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grouting is a construction process by means of which the highly erratic permeability and deformability of foundation rock and soil are homogenized. The main parameter governing the design and construction of grouting works is the permeability of the rock or soil, which is established by means of field permeability tests. This book assembles information on rock and soil grouting from various sources, together with the author's personal experience on several grouting projects. Some aspects of permeability testing of rock and soils are elaborated, and the use of theoretical ground water percolation studies for clarification of design options for grout curtains are presented. The results achieved by grouting are presented and analysed on examples of constructed grouting works (curtains, tunnels, foundations, lifting of structures).Particulars of the performance of the permeability tests and their evaluation are studied in some detail, since they can very much distort the results obtained, and thus lead to erroneous design assumptions. Systematic grouting and adjustment of the injection process to the development of grout consumption and pressure during injection is discussed in connection with the achievement of the required permeability standard. The application of grouting to reduce the permeability and the deformability of the foundation of dams and hydrotechnical structures is presented, together with a number of illustrative examples. Characteristics of contact and consolidation grouting of dam foundations and tunnel linings are described. The possibilities and examples of rock prestressing by means of grouting are reported, and the results from several applications are discussed. Examples of lifting and levelling leaning structures by means of grouting are also reviewed. The book is illustrated by 180 drawings and 20 photographs, and a list of symbols used in the formulae, plus a glossary of specific terms used in grouting, are included at the end of the book.The book is intended for organizations, civil engineers and geologists involved in the exploration, design, construction and supervision of large dams, hydroelectric power projects, tunnels and other underground works. Teachers and students of civil engineering courses in geotechnics, building and construction, rock mechanics, soil mechanics, engineering geology, and some aspects of mining engineering will also find the book useful.
Download or read book Ground Control and Improvement written by Petros P. Xanthakos and published by John Wiley & Sons. This book was released on 1994-06-14 with total page 938 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive compilation concerned with a variety of modern methods being used worldwide to improve soil and rock conditions supporting new and remedial construction. Ground water lowering and drainage techniques, soil compaction, excavation support methods, permeation and jet grouting are among the many topics discussed. More than 100 tables and 650 figures illustrate the text.
Download or read book Chemical Grouting And Soil Stabilization Revised And Expanded written by Reuben H. Karol and published by CRC Press. This book was released on 2003-04-18 with total page 505 pages. Available in PDF, EPUB and Kindle. Book excerpt: Following shifting trends from remedial to preventive uses of grouting practices, this third edition covers all aspects of chemical grouting methods and applications. This reference highlights new ground improvement techniques as well as recent innovations in soil modification and stabilization procedures. It considers commercial alternatives to ground improvement, their relative advantages and disadvantages, and the engineering applications to which these methods are suited. Revised and expanded, this new edition assesses the role of new grouting techniques in the containment of hazardous waste and introduces numerous problems to illustrate concepts and facilitate instruction.
Download or read book Fundamentals of Ground Improvement Engineering written by Jeffrey Evans and published by CRC Press. This book was released on 2021-09-17 with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt: Ground improvement has been one of the most dynamic and rapidly evolving areas of geotechnical engineering and construction over the past 40 years. The need to develop sites with marginal soils has made ground improvement an increasingly important core component of geotechnical engineering curricula. Fundamentals of Ground Improvement Engineering addresses the most effective and latest cutting-edge techniques for ground improvement. Key ground improvement methods are introduced that provide readers with a thorough understanding of the theory, design principles, and construction approaches that underpin each method. Major topics are compaction, permeation grouting, vibratory methods, soil mixing, stabilization and solidification, cutoff walls, dewatering, consolidation, geosynthetics, jet grouting, ground freezing, compaction grouting, and earth retention. The book is ideal for undergraduate and graduate-level university students, as well as practitioners seeking fundamental background in these techniques. The numerous problems, with worked examples, photographs, schematics, charts and graphs make it an excellent reference and teaching tool.
Download or read book Soil Improvement and Ground Modification Methods written by Peter G. Nicholson and published by Butterworth-Heinemann. This book was released on 2014-08-29 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an author with more than 25 years of field and academic experience, Soil Improvement and Ground Modification Methods explains ground improvement technologies for converting marginal soil into soil that will support all types of structures. Soil improvement is the alteration of any property of a soil to improve its engineering performance. Some sort of soil improvement must happen on every construction site. This combined with rapid urbanization and the industrial growth presents a huge dilemma to providing a solid structure at a competitive price. The perfect guide for new or practicing engineers, this reference covers projects involving soil stabilization and soil admixtures, including utilization of industrial waste and by-products, commercially available soil admixtures, conventional soil improvement techniques, and state-of-the-art testing methods. - Conventional soil improvement techniques and state-of-the-art testing methods - Methods for mitigating or removing the risk of liquefaction in the event of major vibrations - Structural elements for stabilization of new or existing construction industrial waste/by-products, commercially available soil - Innovative techniques for drainage, filtration, dewatering, stabilization of waste, and contaminant control and removal
Download or read book Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions written by Francesco Silvestri and published by CRC Press. This book was released on 2019-07-19 with total page 8083 pages. Available in PDF, EPUB and Kindle. Book excerpt: Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions contains invited, keynote and theme lectures and regular papers presented at the 7th International Conference on Earthquake Geotechnical Engineering (Rome, Italy, 17-20 June 2019. The contributions deal with recent developments and advancements as well as case histories, field monitoring, experimental characterization, physical and analytical modelling, and applications related to the variety of environmental phenomena induced by earthquakes in soils and their effects on engineered systems interacting with them. The book is divided in the sections below: Invited papers Keynote papers Theme lectures Special Session on Large Scale Testing Special Session on Liquefact Projects Special Session on Lessons learned from recent earthquakes Special Session on the Central Italy earthquake Regular papers Earthquake Geotechnical Engineering for Protection and Development of Environment and Constructions provides a significant up-to-date collection of recent experiences and developments, and aims at engineers, geologists and seismologists, consultants, public and private contractors, local national and international authorities, and to all those involved in research and practice related to Earthquake Geotechnical Engineering.
Download or read book Introduction to Rock Mechanics written by Richard E. Goodman and published by John Wiley & Sons. This book was released on 1991-01-16 with total page 582 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduces a new approach to rock mechanics called ``block theory,'' which formalizes procedures for selecting proper shapes and orientations for excavations in hard jointed rock. Applies block theory to rock slopes and underground excavations, and covers the Q theory of rock classification, the empirical criterion of joint shear strength, rock bolting, properties of weak rocks, statistical frequency of jointing, an empirical criterion of rock strength, and design of underground supports. Contains many new problems with worked-out solutions.
Download or read book Pile Design and Construction Practice written by Willis H. Thomas and published by CRC Press. This book was released on 2007-12-06 with total page 566 pages. Available in PDF, EPUB and Kindle. Book excerpt: This international handbook is essential for geotechnical engineers and engineering geologists responsible for designing and constructing piled foundations. It explains general principles and practice and details current types of pile, piling equipment and methods. It includes calculations of the resistance of piles to compressive loads, pile group
