Download or read book Improvement of Fatigue Properties in Titanium Alloys written by Charles M. Gilmore and published by . This book was released on 1974 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fatigue crack initiation lives of annealed Ti-6Al-4V alloys were determined at low (+ or - 0.006 in/in) and high (+ or - 0.012 in/in) shear strain amplitudes. The initiation life was separated from the propagation life by determining when extensive axial elongation of the specimen occurred. At 0.006 and 0.012 strain amplitudes the a-b annealed (alpha beta A) and mill annealed (MA) specimens have similar lives to crack initiation followed by recrystallized anneal (RA) and beta annealed (beta A) specimens. Analysis of the beta A specimens showed that structure related fatigue fracture was occurring and this was not observed with the other anneals. 'Cyclic creep' tests were conducted on each anneal treatment and the RA material exhibited the best dimensional stability and the beta A material the worst. These results are in accordance with the expected phase stability of each alloy; the RA material should be the closest to an equilibrium microstructure; the Beta A material the farthest from an equilibrium microstructure. The greatest increase in fatigue lives occurred for specimens quenched from a solution temperature of 1650 F, which is about 100 F below the beta transus. Reduction of solution temperature to 1550 F, or increases to 1750 F and 1950 F resulted in lower lives than the 1650 F solution temperature. The fracture surface of the material quenched from 1950 F had brittle type fatigue striations, also the region of fast fracture had evidence of microstructure effects. (Author).
Download or read book Advanced Surface Enhancement written by Sho Itoh and published by Springer Nature. This book was released on 2019-08-30 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the first INCASE conference, organised by ARTC at A*STAR, Singapore. It provides a comprehensive review of recent advances in surface enhancement processes and strategies employed to assess their impact on materials properties and performance. As cyber-physical systems are becoming more and more relevant in manufacturing, it focuses on assessing the readiness of current technologies for future transformations, such as Industry 4.0, identifying the opportunities and challenges, and exploring ways to address them. Written by researchers, practising engineering and industry experts, the book bridges the gap between research and manufacturing, promoting technology adoption in industry and innovative ideas to prepare it for the future.
Download or read book The Influence of surface treatment on the fatigue properties of titanium and titanium alloys written by L. Thomassen, M.J. Sinnott, A.W. Demmler, Jr. and published by . This book was released on 1954 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Metal Fatigue Effects of Small Defects and Nonmetallic Inclusions written by Yukitaka Murakami and published by Elsevier. This book was released on 2002-04-29 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: Metal fatigue is an essential consideration for engineers and researchers who are looking at factors that cause metals to fail through stress, corrosion, etc. This is an English translation of a book originally published in Japan in 1993, with an additional two chapters on the fatigue failure of steels and the effect of surface roughness on fatigue strength. The methodology is based on important and reliable results and may be usefully applied to other fatigue problems not directly treated in this book.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Titanium Alloys written by Jan Sieniawski and published by BoD – Books on Demand. This book was released on 2013-05-15 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book contains six chapters and covers topics dealing with biomedical applications of titanium alloys, surface treatment, relationships between microstructure and mechanical and technological properties, and the effect of radiation on the structure of the titanium alloys.
Download or read book Proceedings of the 13th World Conference on Titanium written by Vasisht Venkatesh and published by John Wiley & Sons. This book was released on 2016-04-26 with total page 4024 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains the Proceedings of the 13th World Conference on Titanium.
Download or read book The fatigue properties of titanium and titanium alloys written by Dr. M. Hempel and published by . This book was released on 1971 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fatigue of Beta Processed and Beta Heat treated Titanium Alloys written by Russell Wanhill and published by Springer Science & Business Media. This book was released on 2011-10-28 with total page 58 pages. Available in PDF, EPUB and Kindle. Book excerpt: This publication reviews most of the available literature on the fatigue properties of β annealed Ti-6Al-4V and titanium alloys with similar microstructures. The focus is on β processed and β heat-treated alloys because β annealed Ti-6Al-4V has been selected for highly loaded and fatigue-critical structures, including the main wing-carry-through bulkheads and vertical tail stubs, of advanced high-performance military aircraft. An important aspect of the review is a concise survey of fatigue life assessment methods and the required types of fatigue data. This survey provides the background to recommendations for further research, especially on the fatigue behaviour of β annealed Ti-6Al-4V under realistic fatigue load histories, including the essential topic of short/small fatigue crack growth. Such research is required for independent fatigue life assessments that conform to the aircraft manufacturer’s design requirements, and also for life reassessments that most probably will have to be made during the service life of the aircraft.
Download or read book Recent Advances in Arthroplasty written by Samo Fokter and published by BoD – Books on Demand. This book was released on 2012-01-27 with total page 630 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book was to offer an overview of recent insights into the current state of arthroplasty. The tremendous long term success of Sir Charnley's total hip arthroplasty has encouraged many researchers to treat pain, improve function and create solutions for higher quality of life. Indeed and as described in a special chapter of this book, arthroplasty is an emerging field in the joints of upper extremity and spine. However, there are inborn complications in any foreign design brought to the human body. First, in the chapter on infections we endeavor to provide a comprehensive, up-to-date analysis and description of the management of this difficult problem. Second, the immune system is faced with a strange material coming in huge amounts of micro-particles from the tribology code. Therefore, great attention to the problem of aseptic loosening has been addressed in special chapters on loosening and on materials currently available for arthroplasty.
Download or read book Machining of Titanium Alloys written by J. Paulo Davim and published by Springer. This book was released on 2014-07-05 with total page 154 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a collection of examples illustrating the resent research advances in the machining of titanium alloys. These materials have excellent strength and fracture toughness as well as low density and good corrosion resistance; however, machinability is still poor due to their low thermal conductivity and high chemical reactivity with cutting tool materials. This book presents solutions to enhance machinability in titanium-based alloys and serves as a useful reference to professionals and researchers in aerospace, automotive and biomedical fields.
Download or read book Fatigue and Fracture written by F. C. Campbell and published by ASM International. This book was released on 2012-01-01 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book emphasizes the physical and practical aspects of fatigue and fracture. It covers mechanical properties of materials, differences between ductile and brittle fractures, fracture mechanics, the basics of fatigue, structural joints, high temperature failures, wear, environmentally-induced failures, and steps in the failure analysis process."--publishers website.
Download or read book Fatigue of Structures and Materials written by J. Schijve and published by Springer Science & Business Media. This book was released on 2008-12-16 with total page 627 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fatigue of structures and materials covers a wide scope of different topics. The purpose of the present book is to explain these topics, to indicate how they can be analyzed, and how this can contribute to the designing of fatigue resistant structures and to prevent structural fatigue problems in service. Chapter 1 gives a general survey of the topic with brief comments on the signi?cance of the aspects involved. This serves as a kind of a program for the following chapters. The central issues in this book are predictions of fatigue properties and designing against fatigue. These objectives cannot be realized without a physical and mechanical understanding of all relevant conditions. In Chapter 2 the book starts with basic concepts of what happens in the material of a structure under cyclic loads. It illustrates the large number of variables which can affect fatigue properties and it provides the essential background knowledge for subsequent chapters. Different subjects are presented in the following main parts: • Basic chapters on fatigue properties and predictions (Chapters 2–8) • Load spectra and fatigue under variable-amplitude loading (Chapters 9–11) • Fatigue tests and scatter (Chapters 12 and 13) • Special fatigue conditions (Chapters 14–17) • Fatigue of joints and structures (Chapters 18–20) • Fiber-metal laminates (Chapter 21) Each chapter presents a discussion of a speci?c subject.
Download or read book THE INFLUENCE OF SURFACE TREATMENT ON THE FATIGUE PROPERTIES OF TITANIUM AND TITANIUM ALLOYS written by L. THOMASSEN and published by . This book was released on 1953 with total page 12 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Inlfuence of Surface Treatment On The Fatigue Properties Of Titanium And Titanium Alloys written by L. Thomassen and published by . This book was released on 1958 with total page 9 pages. Available in PDF, EPUB and Kindle. Book excerpt:
