Download or read book Improvement in Ductility and Fracture Toughness of HIP d and Isothermally Forged Ti 6Al 6V 2Sn Powder with Heat Treatment written by Ronald P. Simpson and published by . This book was released on 1986 with total page 76 pages. Available in PDF, EPUB and Kindle. Book excerpt: This program was aimed at optimizing the mechanical behavior of powder metallurgy compacts of the Ti-6Al-6V-2Sn alloy. Particular emphasis was placed on breaking-up continuous grain boundary alpha which previous work had indicated was detrimental to the properties of concern, particularly ductility and fracture toughness. A range of microstructures were produced in Hydride-Dehydride and Rotating Electrode Powder Compacts using combinations of hot isostatic pressing, extrusion, isothermal forging and heat treatment. Based on the microstructural studies, two heat treatments were selected and used in combination with powder compaction (Hot isostatic pressing or extrusion) and isothermal forging to develop mechanical properties which were correlated with processing, microstructure and fractographic features. Two types of microstructures were identified as having acceptable levels of strength, ductility and fracture toughness: 1) a high volume fraction of fine equiaxed primary alpha in a matrix of transformed beta and 2) a relatively coarse secondary alpha plate dispersion in combination with a small volume fraction of large low aspect ratio primary alpha. The processing routes necessary to develop structures were defined.
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1987 with total page 1126 pages. Available in PDF, EPUB and Kindle. Book excerpt: Lists citations with abstracts for aerospace related reports obtained from world wide sources and announces documents that have recently been entered into the NASA Scientific and Technical Information Database.
Download or read book CAB Current Awareness Bulletin written by and published by . This book was released on 1985 with total page 374 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Metals Abstracts written by and published by . This book was released on 1987 with total page 1206 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1986 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Annual Index written by and published by . This book was released on 1986 with total page 1336 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Titanium Alloys written by Maciej Motyka and published by BoD – Books on Demand. This book was released on 2019-11-27 with total page 156 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium alloys, due to unique physical and chemical properties (mainly high relative strength combined with very good corrosion resistance), are considered as an important structural metallic material used in hi-tech industries (e.g. aerospace, space technology). This book provides information on new manufacturing and processing methods of single- and two-phase titanium alloys. The eight chapters of this book are distributed over four sections. The first section (Introduction) indicates the main factors determining application areas of titanium and its alloys. The second section (Manufacturing, two chapters) concerns modern production methods for titanium and its alloys. The third section (Thermomechanical and surface treatment, three chapters) covers problems of thermomechanical processing and surface treatment used for single- and two-phase titanium alloys. The fourth section (Machining, two chapters) describes the recent results of high speed machining of Ti-6Al-4V alloy and the possibility of application of sustainable machining for titanium alloys.
Download or read book Titanium written by Matthew J. Donachie and published by ASM International. This book was released on 2000 with total page 381 pages. Available in PDF, EPUB and Kindle. Book excerpt: Designed to support the need of engineering, management, and other professionals for information on titanium by providing an overview of the major topics, this book provides a concise summary of the most useful information required to understand titanium and its alloys. The author provides a review of the significant features of the metallurgy and application of titanium and its alloys. All technical aspects of the use of titanium are covered, with sufficient metals property data for most users. Because of its unique density, corrosion resistance, and relative strength advantages over competing materials such as aluminum, steels, and superalloys, titanium has found a niche in many industries. Much of this use has occurred through military research, and subsequent applications in aircraft, of gas turbine engines, although more recent use features replacement joints, golf clubs, and bicycles.Contents include: A primer on titanium and its alloys, Introduction to selection of titanium alloys, Understanding titanium's metallurgy and mill products, Forging and forming, Castings, Powder metallurgy, Heat treating, Joining technology and practice, Machining, Cleaning and finishing, Structure/processing/property relationships, Corrosion resistance, Advanced alloys and future directions, Appendices: Summary table of titanium alloys, Titanium alloy datasheets, Cross-reference to titanium alloys, Listing of selected specification and standardization organizations, Selected manufacturers, suppliers, services, Corrosion data, Machining data.
Download or read book New Materials for Next Generation Commercial Transports written by Committee on New Materials for Advanced Civil Aircraft and published by National Academies Press. This book was released on 1996-03-29 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: The major objective of this book was to identify issues related to the introduction of new materials and the effects that advanced materials will have on the durability and technical risk of future civil aircraft throughout their service life. The committee investigated the new materials and structural concepts that are likely to be incorporated into next generation commercial aircraft and the factors influencing application decisions. Based on these predictions, the committee attempted to identify the design, characterization, monitoring, and maintenance issues that are critical for the introduction of advanced materials and structural concepts into future aircraft.
Download or read book Powder Metallurgy of Titanium written by Ma Qian and published by Trans Tech Publications Ltd. This book was released on 2012-08-24 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: The conference upon which this work is based fully achieved its objectives and turned out to be the largest international gathering dedicated solely to the topic of titanium processing via powder metallurgy. Volume is indexed by Thomson Reuters CPCI-S (WoS). The 50 peer-reviewed papers are grouped into 8 chapters: PM titanium alloy design and processing developments; Powder Production; Effect of Impurities; Metal Injection Moulding of Titanium; Biomedical Titanium Alloys; Titanium Composites; Forging and Equal-Channel Angular Pressing of Titanium; Laser Cladding, Welding, Slip Casting and Other Processing Developments.
Download or read book Titanium and Titanium Alloys written by Christoph Leyens and published by John Wiley & Sons. This book was released on 2006-03-06 with total page 532 pages. Available in PDF, EPUB and Kindle. Book excerpt: This handbook is an excellent reference for materials scientists and engineers needing to gain more knowledge about these engineering materials. Following introductory chapters on the fundamental materials properties of titanium, readers will find comprehensive descriptions of the development, processing and properties of modern titanium alloys. There then follows detailed discussion of the applications of titanium and its alloys in aerospace, medicine, energy and automotive technology.
Download or read book Titanium Powder Metallurgy written by Ma Qian and published by Butterworth-Heinemann. This book was released on 2015-02-10 with total page 649 pages. Available in PDF, EPUB and Kindle. Book excerpt: Titanium Powder Metallurgy contains the most comprehensive and authoritative information for, and understanding of, all key issues of titanium powder metallurgy (Ti PM). It summarizes the past, reviews the present and discusses the future of the science and technology of Ti PM while providing the world titanium community with a unique and comprehensive book covering all important aspects of titanium powder metallurgy, including powder production, powder processing, green shape formation, consolidation, property evaluation, current industrial applications and future developments. It documents the fundamental understanding and technological developments achieved since 1937 and demonstrates why powder metallurgy now offers a cost-effective approach to the near net or net shape fabrication of titanium, titanium alloys and titanium metal matrix composites for a wide variety of industrial applications. - Provides a comprehensive and in-depth treatment of the science, technology and industrial practice of titanium powder metallurgy - Each chapter is delivered by the most knowledgeable expert on the topic, half from industry and half from academia, including several pioneers in the field, representing our current knowledge base of Ti PM. - Includes a critical review of the current key fundamental and technical issues of Ti PM. - Fills a critical knowledge gap in powder metal science and engineering and in the manufacture of titanium metal and alloys
Download or read book Atlas of Fatigue Curves written by Howard E. Boyer and published by ASM International. This book was released on 1985-12-31 with total page 544 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contains more than 500 fatigue curves for industrial ferrous and nonferrous alloys. Also includes an explanation of fatigue testing and interpretation of test results. Each curve is presented independently and includes an explanation of its particular importance.
Download or read book The Handbook of Advanced Materials written by and published by John Wiley & Sons. This book was released on 2004-04-27 with total page 656 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written to educate readers about recent advances in the area of new materials used in making products. Materials and their properties usually limit the component designer. * Presents information about all of these advanced materials that enable products to be designed in a new way * Provides a cost effective way for the design engineer to become acquainted with new materials * The material expert benefits by being aware of the latest development in all these areas so he/she can focus on further improvements
Download or read book Manufacturing Technology for Aerospace Structural Materials written by Flake C Campbell Jr and published by Elsevier. This book was released on 2011-08-31 with total page 617 pages. Available in PDF, EPUB and Kindle. Book excerpt: The rapidly-expanding aerospace industry is a prime developer and user of advanced metallic and composite materials in its many products. This book concentrates on the manufacturing technology necessary to fabricate and assemble these materials into useful and effective structural components. Detailed chapters are dedicated to each key metal or alloy used in the industry, including aluminum, magnesium, beryllium, titanium, high strength steels, and superalloys. In addition the book deals with composites, adhesive bonding and presents the essentials of structural assembly. This book will be an important resource for all those involved in aerospace design and construction, materials science and engineering, as well as for metallurgists and those working in related sectors such as the automotive and mass transport industries. Flake Campbell Jr has over thirty seven years experience in the aerospace industry and is currently Senior Technical Fellow at the Boeing Phantom Works in Missouri, USA.* All major aerospace structural materials covered: metals and composites* Focus on details of manufacture and use* Author has huge experience in aerospace industry* A must-have book for materials engineers, design and structural engineers, metallurgical engineers and manufacturers for the aerospace industry
Download or read book Titanium Matrix Composites written by Shankar Mall and published by CRC Press. This book was released on 2020-01-29 with total page 482 pages. Available in PDF, EPUB and Kindle. Book excerpt: A review and summary of advancements related to mechanical behavior and related mechanics issues of titanium matrix composites (TMCs), a class of high-temperature materials useful in the propulsion and airframe components in advanced aerospace systems. After an introduction to TMCs, different authors review and summarise the advancements related to mechanical behavior and related mechanics issues of TMCs.
