Download or read book Dynamic Estimation and Control of Power Systems written by Abhinav Kumar Singh and published by Academic Press. This book was released on 2018-10-04 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dynamic estimation and control is a fast growing and widely researched field of study that lays the foundation for a new generation of technologies that can dynamically, adaptively and automatically stabilize power systems. This book provides a comprehensive introduction to research techniques for real-time estimation and control of power systems. Dynamic Estimation and Control of Power Systems coherently and concisely explains key concepts in a step by step manner, beginning with the fundamentals and building up to the latest developments of the field. Each chapter features examples to illustrate the main ideas, and effective research tools are presented for signal processing-based estimation of the dynamic states and subsequent control, both centralized and decentralized, as well as linear and nonlinear. Detailed mathematical proofs are included for readers who desire a deeper technical understanding of the methods. This book is an ideal research reference for engineers and researchers working on monitoring and stability of modern grids, as well as postgraduate students studying these topics. It serves to deliver a clear understanding of the tools needed for estimation and control, while also acting as a basis for readers to further develop new and improved approaches in their own research. - Offers the first concise, single resource on dynamic estimation and control of power systems - Provides both an understanding of estimation and control concepts and a comparison of results - Includes detailed case-studies, including MATLAB codes, to explain and demonstrate the concepts presented

Download or read book IEEE Guide for AC Motor Protection written by and published by . This book was released on 2000 with total page 106 pages. Available in PDF, EPUB and Kindle. Book excerpt: Generally accepted methods of protection for ac motors are provided. This guide identifies and summarizes the functions necessary for adequate protection of motors based on type, size, and application. This guide does not purport to detail the protective requirements if all motors in every situation.

Download or read book Electrical Safety Code Manual written by Kimberley Keller and published by Butterworth-Heinemann. This book was released on 2010-07-19 with total page 397 pages. Available in PDF, EPUB and Kindle. Book excerpt: Safety in any workplace is extremely important. In the case of the electrical industry, safety is critical and the codes and regulations which determine safe practices are both diverse and complicated. Employers, electricians, electrical system designers, inspectors, engineers and architects must comply with safety standards listed in the National Electrical Code, OSHA and NFPA 70E. Unfortunately, the publications which list these safety requirements are written in very technically advanced terms and the average person has an extremely difficult time understanding exactly what they need to do to ensure safe installations and working environments. Electrical Safety Code Manual will tie together the various regulations and practices for electrical safety and translate these complicated standards into easy to understand terms. This will result in a publication that is a practical, if not essential, asset to not only designers and company owners but to the electricians who must put compliance requirements into action in the field. - Best-practice methods for accident prevention and electrical hazard avoidance - Current safety regulations, including new standards from OSHA, NEC, NESC, and NFPA - Information on low-, medium-, and high-voltage safety systems - Step-by-step guidelines on safety audits - Training program how-to's, from setup to rescue and first aid procedures

Download or read book High Voltage Circuit Breakers written by Ruben D. Garzon and published by CRC Press. This book was released on 2002-06-04 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This newly revised and updated reference presents sensible approaches to the design, selection, and usage of high-voltage circuit breakers-highlighting compliance issues concerning new and aging equipment to the evolving standards set forth by the American National Standards Institute and the International Electrotechnical Commission. This edition features the latest advances in mechanical and dielectric design and application from a simplified qualitative perspective. High Voltage Circuit Breakers: Design and Applications features new material on contact resistance, insulating film coatings, and fretting; temperature at the point of contact; short-time heating of copper; erosion and electromagnetic forces on contacts; closing speed and circuit breaker requirements; "weld" break and contact bounce; factors influencing dielectric strength; air, SF6, vacuum, and solid insulation; and dielectric loss and partial discharges, and includes updated chapters on capacitance switching; switching series and shunt reactors; temporary overvoltages; and the benefits of condition monitoring.

Download or read book Grid Converters for Photovoltaic and Wind Power Systems written by Remus Teodorescu and published by John Wiley & Sons. This book was released on 2011-07-28 with total page 358 pages. Available in PDF, EPUB and Kindle. Book excerpt: Grid converters are the key player in renewable energy integration. The high penetration of renewable energy systems is calling for new more stringent grid requirements. As a consequence, the grid converters should be able to exhibit advanced functions like: dynamic control of active and reactive power, operation within a wide range of voltage and frequency, voltage ride-through capability, reactive current injection during faults, grid services support. This book explains the topologies, modulation and control of grid converters for both photovoltaic and wind power applications. In addition to power electronics, this book focuses on the specific applications in photovoltaic wind power systems where grid condition is an essential factor. With a review of the most recent grid requirements for photovoltaic and wind power systems, the book discusses these other relevant issues: modern grid inverter topologies for photovoltaic and wind turbines islanding detection methods for photovoltaic systems synchronization techniques based on second order generalized integrators (SOGI) advanced synchronization techniques with robust operation under grid unbalance condition grid filter design and active damping techniques power control under grid fault conditions, considering both positive and negative sequences Grid Converters for Photovoltaic and Wind Power Systems is intended as a coursebook for graduated students with a background in electrical engineering and also for professionals in the evolving renewable energy industry. For people from academia interested in adopting the course, a set of slides is available for download from the website. www.wiley.com/go/grid_converters

Download or read book IEEE Guide for Design of Substation Rigid bus Structures written by and published by . This book was released on 1999 with total page 107 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rigid-bus structures for outdoor and indoor, air-insulated, and alternating-current substations are covered. Portions of this guide are also applicable to strain-bus structures or direct-current substations, or both. Ampacity, radio influence, vibration, and forces due to gravity, wind, fault current, and thermal expansion are considered. Design criteria for conductor and insulator strength calculations are included.

Download or read book Transients in Electrical Systems Analysis Recognition and Mitigation written by J. C. Das and published by McGraw Hill Professional. This book was released on 2010-05-06 with total page 737 pages. Available in PDF, EPUB and Kindle. Book excerpt: Detect and Mitigate Transients in Electrical Systems This practical guide explains how to identify the origin of disturbances in electrical systems and analyze them for effective mitigation and control. Transients in Electrical Systems considers all transient frequencies, ranging from 0.1 Hz to 50 MHz, and discusses transmission line and cable modeling as well as frequency dependent behavior. Results of EMTP simulations, solved examples, and detailed equations are included in this comprehensive resource. Transients in Electrical Systems covers: Transients in lumped circuits Control systems Lightning strokes, shielding, and backflashovers Transients of shunt capacitor banks Switching transients and temporary overvoltages Current interruption in AC circuits Symmetrical and unsymmetrical short-circuit currents Transient behavior of synchronous generators, induction and synchronous motors, and transformers Power electronic equipment Flicker, bus, transfer, and torsional vibrations Insulation coordination Gas insulated substations Transients in low-voltage and grounding systems Surge arresters DC systems, short-circuits, distributions, and HVDC Smart grids and wind power generation

Download or read book IEEE Recommended Practice for Grounding of Industrial and Commercial Power Systems written by IEEE Industry Applications Society. Power Systems Engineering Committee and published by Inst of Elect & Electronic. This book was released on 1992 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt: The problems of system grounding, that is, connection to ground of neutral, of the corner of the delta, or of the midtap of one phase, are covered. The advantages and disadvantages of grounded versus ungrounded systems are discussed. Information is given on how to ground the system, where the system should be grounded, and how to select equipment for the grounding of the neutral circuits. Connecting the frames and enclosures of electric apparatus, such as motors, switchgear, transformers, buses, cables conduits, building frames, and portable equipment, to a ground system is addressed. The fundamentals of making the interconnection or ground-conductor system between electric equipment and the ground rods, water pipes, etc. are outlined. The problems of static electricity(how it is generated, what processes may produce it, how it is measured, and what should be done to prevent its generation or to drain the static charges to earth to prevent sparking(are treated. Methods of protecting structures against the effects of lightning are also covered. Obtaining a low-resistance connection to the earth, use of ground rods, connections to water pipes, etc, are discussed. A separate chapter on sensitive electronic equipment is included.

Download or read book IEEE Trial use Guide to the Measurement of Partial Discharges in Rotating Machinery written by and published by . This book was released on 2000 with total page 55 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Internet of Things Applications From Research and Innovation to Market Deployment written by Ovidiu Vermesan and published by . This book was released on 2024-10-21 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book aims to provide a broad overview of various topics of Internet of Things from the research, innovation and development priorities to enabling technologies, nanoelectronics, cyber physical systems, architecture, interoperability and industrial applications. It is intended to be a standalone book in a series that covers the Internet of Things activities of the IERC - Internet of Things European Research Cluster from technology to international cooperation and the global state of play.The book builds on the ideas put forward by the European research Cluster on the Internet of Things Strategic Research Agenda and presents global views and state of the art results.

Download or read book Electrical Transients in Power Systems written by Allan Greenwood and published by Wiley-Interscience. This book was released on 1991-04-18 with total page 778 pages. Available in PDF, EPUB and Kindle. Book excerpt: The principles of the First Edition--to teach students and engineers the fundamentals of electrical transients and equip them with the skills to recognize and solve transient problems in power networks and components--also guide this Second Edition. While the text continues to stress the physical aspects of the phenomena involved in these problems, it also broadens and updates the computational treatment of transients. Necessarily, two new chapters address the subject of modeling and models for most types of equipment are discussed. The adequacy of the models, their validation and the relationship between model and the physical entity it represents are also examined. There are now chapters devoted entirely to isolation coordination and protection, reflecting the revolution that metal oxide surge arresters have caused in the power industry. Features additional and more complete illustrative material--figures, diagrams and worked examples. An entirely new chapter of case studies demonstrates modeling and computational techniques as they have been applied by engineers to specific problems.