Download or read book An Introduction to Packet Microwave Systems and Technologies written by Paolo Volpato and published by Artech House. This book was released on 2016-12-31 with total page 231 pages. Available in PDF, EPUB and Kindle. Book excerpt: Providing a thorough introduction to packet microwave systems and technologies, this unique book focuses on the architecture of microwave networks and the applications of packet microwaves, particularly in mobile backhaul. IP and data technologies which are the key differentiator of packet microwave systems are explored. Microwave applications and packet microwave, including radio equipment chain, full-indoor and outdoor applications, and operational aspects are presented along with packet microwave in hybrid applications and packet technologies for capacity scale. The structure of packet microwave network and mobile backhaul along with a glance at the evolution of packet microwave are discussed. Readers find support for end-to-end design of transmission services in this book.

Download or read book Hardware Accelerators in Data Centers written by Christoforos Kachris and published by Springer. This book was released on 2018-08-21 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides readers with an overview of the architectures, programming frameworks, and hardware accelerators for typical cloud computing applications in data centers. The authors present the most recent and promising solutions, using hardware accelerators to provide high throughput, reduced latency and higher energy efficiency compared to current servers based on commodity processors. Readers will benefit from state-of-the-art information regarding application requirements in contemporary data centers, computational complexity of typical tasks in cloud computing, and a programming framework for the efficient utilization of the hardware accelerators.

Download or read book Distributed Real Time Architecture for Mixed Criticality Systems written by Hamidreza Ahmadian and published by CRC Press. This book was released on 2018-09-05 with total page 638 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes a cross-domain architecture and design tools for networked complex systems where application subsystems of different criticality coexist and interact on networked multi-core chips. The architecture leverages multi-core platforms for a hierarchical system perspective of mixed-criticality applications. This system perspective is realized by virtualization to establish security, safety and real-time performance. The impact further includes a reduction of time-to-market, decreased development, deployment and maintenance cost, and the exploitation of the economies of scale through cross-domain components and tools. Describes an end-to-end architecture for hypervisor-level, chip-level, and cluster level. Offers a solution for different types of resources including processors, on-chip communication, off-chip communication, and I/O. Provides a cross-domain approach with examples for wind-power, health-care, and avionics. Introduces hierarchical adaptation strategies for mixed-criticality systems Provides modular verification and certification methods for the seamless integration of mixed-criticality systems. Covers platform technologies, along with a methodology for the development process. Presents an experimental evaluation of technological results in cooperation with industrial partners. The information in this book will be extremely useful to industry leaders who design and manufacture products with distributed embedded systems in mixed-criticality use-cases. It will also benefit suppliers of embedded components or development tools used in this area. As an educational tool, this material can be used to teach students and working professionals in areas including embedded systems, computer networks, system architecture, dependability, real-time systems, and avionics, wind-power and health-care systems.

Download or read book Architecture of Computing Systems written by Dietmar Fey and published by Springer Nature. This book was released on with total page 368 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Introduction to Storage Area Networks written by Jon Tate and published by IBM Redbooks. This book was released on 2018-10-09 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: The superabundance of data that is created by today's businesses is making storage a strategic investment priority for companies of all sizes. As storage takes precedence, the following major initiatives emerge: Flatten and converge your network: IBM® takes an open, standards-based approach to implement the latest advances in the flat, converged data center network designs of today. IBM Storage solutions enable clients to deploy a high-speed, low-latency Unified Fabric Architecture. Optimize and automate virtualization: Advanced virtualization awareness reduces the cost and complexity of deploying physical and virtual data center infrastructure. Simplify management: IBM data center networks are easy to deploy, maintain, scale, and virtualize, delivering the foundation of consolidated operations for dynamic infrastructure management. Storage is no longer an afterthought. Too much is at stake. Companies are searching for more ways to efficiently manage expanding volumes of data, and to make that data accessible throughout the enterprise. This demand is propelling the move of storage into the network. Also, the increasing complexity of managing large numbers of storage devices and vast amounts of data is driving greater business value into software and services. With current estimates of the amount of data to be managed and made available increasing at 60% each year, this outlook is where a storage area network (SAN) enters the arena. SANs are the leading storage infrastructure for the global economy of today. SANs offer simplified storage management, scalability, flexibility, and availability; and improved data access, movement, and backup. Welcome to the cognitive era. The smarter data center with the improved economics of IT can be achieved by connecting servers and storage with a high-speed and intelligent network fabric. A smarter data center that hosts IBM Storage solutions can provide an environment that is smarter, faster, greener, open, and easy to manage. This IBM® Redbooks® publication provides an introduction to SAN and Ethernet networking, and how these networks help to achieve a smarter data center. This book is intended for people who are not very familiar with IT, or who are just starting out in the IT world.

Download or read book Automotive Ethernet written by Kirsten Matheus and published by Cambridge University Press. This book was released on 2015 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Learn how automotive Ethernet is revolutionizing in-car networking from the experts at the core of its development. Providing an in-depth account of automotive Ethernet, from its background and development, to its future prospects, this book is ideal for industry professionals and academics alike.

Download or read book Broadband Wireless Access and Local Networks written by Byeong Gi Lee and published by Artech House. This book was released on 2008 with total page 647 pages. Available in PDF, EPUB and Kindle. Book excerpt: This authoritative resource offers you complete, state-of-the-art coverage of wireless broadband access networks. The book provides you with a thorough introduction to wireless access and local networks, covers broadband mobile wireless access systems, and details mobile and broadband wireless local area networks. This forward-looking reference focuses on cutting-edge mobile WiMax, WiFi, and WiBro technologies, including in-depth design and implementation guidance. Collecting the most recent experience and knowledge of design and field engineers from leading organizations like Samsung Electronics, Korea Telecom (KT) Corporation and Philips Electronics, the book introduces the network technologies adopted by Mobile WiMAX for the implementation of IP-based broadband mobile wireless access. Moreover, it covers the Wi-Fi technologies that have steadily evolved over the past decade, establishing a firm foundation for IP-based wireless local network access.

Download or read book Body Sensor Networks written by Guang-Zhong Yang and published by Springer. This book was released on 2014-04-16 with total page 572 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last decade has witnessed a rapid surge of interest in new sensing and monitoring devices for wellbeing and healthcare. One key development in this area is wireless, wearable and implantable in vivo monitoring and intervention. A myriad of platforms are now available from both academic institutions and commercial organisations. They permit the management of patients with both acute and chronic symptoms, including diabetes, cardiovascular diseases, treatment of epilepsy and other debilitating neurological disorders. Despite extensive developments in sensing technologies, there are significant research issues related to system integration, sensor miniaturisation, low-power sensor interface, wireless telemetry and signal processing. In the 2nd edition of this popular and authoritative reference on Body Sensor Networks (BSN), major topics related to the latest technological developments and potential clinical applications are discussed, with contents covering. Biosensor Design, Interfacing and Nanotechnology Wireless Communication and Network Topologies Communication Protocols and Standards Energy Harvesting and Power Delivery Ultra-low Power Bio-inspired Processing Multi-sensor Fusion and Context Aware Sensing Autonomic Sensing Wearable, Ingestible Sensor Integration and Exemplar Applications System Integration and Wireless Sensor Microsystems The book also provides a comprehensive review of the current wireless sensor development platforms and a step-by-step guide to developing your own BSN applications through the use of the BSN development kit.

Download or read book Cisco MDS 9718 Multilayer Director for IBM Storage Networking written by Megan Gilge and published by IBM Redbooks. This book was released on 2017-05-15 with total page 56 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® Product Guide describes the Cisco MDS 9718 Multilayer Director for IBM Storage Networking (9710-E16). The MDS 9718 has the industry's highest port density for a storage area network (SAN) director and features 768 line-rate 32 gigabits per second (Gbps) or 16 Gbps Fibre Channel ports. Designed to support multiprotocol workloads, MDS 9718 enables SAN consolidation and collapsed-core solutions for large enterprises, which reduces the number of managed switches and leads to easy-to-manage deployments. The MDS 9718 supports the 48-Port 32 Gbps Fibre Channel Switching Module, the 48-Port 16 Gbps Fibre Channel Switching Module, the 48-port 10 Gbps FCoE Switching Module, the 24-port 40 Gbps FCoE switching module, and the 24/10-port SAN Extension Module. By reducing the number of front-panel ports that are used on inter-switch links (ISLs), it also offers room for future growth. MDS 9718 addresses the mounting storage requirements of today's large virtualized data centers. As a director-class SAN switch, MDS 9718 uses the same operating system and management interface as other Cisco data center switches. It brings intelligent capabilities to a high-performance, protocol-independent switch fabric, and delivers uncompromising availability, security, scalability, simplified management, and the flexibility to integrate new technologies. You can use MDS 9718 to transparently deploy unified fabrics with Fibre Channel and Fibre Channel over Ethernet (FCoE) connectivity to achieve low total cost of ownership (TCO). For mission-critical enterprise storage networks that require secure, robust, cost-effective business-continuance services, the FCIP extension module is designed to deliver outstanding SAN extension performance, reducing latency for disk and tape operations with FCIP acceleration features, including FCIP write acceleration and FCIP tape write and read acceleration.

Download or read book LAN Switch Security written by Eric Vyncke and published by Cisco Press. This book was released on 2007-09-06 with total page 616 pages. Available in PDF, EPUB and Kindle. Book excerpt: Contrary to popular belief, Ethernet switches are not inherently secure. Security vulnerabilities in Ethernet switches are multiple: from the switch implementation, to control plane protocols (Spanning Tree Protocol [STP], Cisco® Discovery Protocol [CDP], and so on) and data plane protocols, such as Address Routing Protocol (ARP) or Dynamic Host Configuration Protocol (DHCP). LAN Switch Security explains all the vulnerabilities in a network infrastructure related to Ethernet switches. Further, this book shows you how to configure a switch to prevent or to mitigate attacks based on those vulnerabilities. This book also includes a section on how to use an Ethernet switch to increase the security of a network and prevent future attacks. Divided into four parts, LAN Switch Security provides you with steps you can take to ensure the integrity of both voice and data traffic traveling over Layer 2 devices. Part I covers vulnerabilities in Layer 2 protocols and how to configure switches to prevent attacks against those vulnerabilities. Part II addresses denial-of-service (DoS) attacks on an Ethernet switch and shows how those attacks can be mitigated. Part III shows how a switch can actually augment the security of a network through the utilization of wirespeed access control list (ACL) processing and IEEE 802.1x for user authentication and authorization. Part IV examines future developments from the LinkSec working group at the IEEE. For all parts, most of the content is vendor independent and is useful for all network architects deploying Ethernet switches. After reading this book, you will have an in-depth understanding of LAN security and be prepared to plug the security holes that exist in a great number of campus networks. Use port security to protect against CAM attacks Prevent spanning-tree attacks Isolate VLANs with proper configuration techniques Protect against rogue DHCP servers Block ARP snooping Prevent IPv6 neighbor discovery and router solicitation exploitation Identify Power over Ethernet vulnerabilities Mitigate risks from HSRP and VRPP Stop information leaks with CDP, PaGP, VTP, CGMP and other Cisco ancillary protocols Understand and prevent DoS attacks against switches Enforce simple wirespeed security policies with ACLs Implement user authentication on a port base with IEEE 802.1x Use new IEEE protocols to encrypt all Ethernet frames at wirespeed. This security book is part of the Cisco Press® Networking Technology Series. Security titles from Cisco Press help networking professionals secure critical data and resources, prevent and mitigate network attacks, and build end-to-end self-defending networks.

Download or read book Wireless Networking Technology written by Steve A. Rackley and published by Elsevier. This book was released on 2011-02-23 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the demand for higher bandwidth has lead to the development of increasingly complex wireless technologies, an understanding of both wireless networking technologies and radio frequency (RF) principles is essential for implementing high performance and cost effective wireless networks.Wireless Networking Technology clearly explains the latest wireless technologies, covering all scales of wireless networking from personal (PAN) through local area (LAN) to metropolitan (MAN). Building on a comprehensive review of the underlying technologies, this practical guide contains 'how to' implementation information, including a case study that looks at the specific requirements for a voice over wireless LAN application. This invaluable resource will give engineers and managers all the necessary knowledge to design, implement and operate high performance wireless networks.· Explore in detail wireless networking technologies and understand the concepts behind RF propagation.· Gain the knowledge and skills required to install, use and troubleshoot wireless networks.· Learn how to address the problems involved in implementing a wireless network, including the impact of signal propagation on operating range, equipment inter-operability problems and many more.· Maximise the efficiency and security of your wireless network.

Download or read book 802 1aq Shortest Path Bridging Design and Evolution written by David Allan and published by John Wiley & Sons. This book was released on 2012-03-13 with total page 220 pages. Available in PDF, EPUB and Kindle. Book excerpt: Facilitates both the understanding and adoption of 802.1aq as a networking solution 802.1aq Shortest Path Bridging (SPB) is a technology that greatly simplifies the creation and configuration of carrier, enterprise, and cloud computing networks—by using modern computing power to deprecate signaling, and to integrate multicast, multipath routing, and large-scale virtualization. It is arguably one of the most significant enhancements in Ethernet's history. 802.1aq Shortest Path Bridging Design and Evolution explains both the "what" and the "why" of the technology standard being set today. It covers which decisions were elective and which were dictated by the design goals by using a multipart approach that first explains what SPB is, before transitioning into narrative form to describe the design processes and decisions behind it. To make SPB accessible to the data networking professional from multiple perspectives, the book: Provides a "Reader's Companion" to the standard Dissects the different elements of SPB Offers applications and potential futures for the technology 802.1aq Shortest Path Bridging Design and Evolution will appeal to system implementers, system and network architects, academics, IT professionals, and general networking professionals.

Download or read book Embedded Systems Architecture written by Tammy Noergaard and published by Newnes. This book was released on 2012-12-31 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt: Embedded Systems Architecture is a practical and technical guide to understanding the components that make up an embedded system's architecture. This book is perfect for those starting out as technical professionals such as engineers, programmers and designers of embedded systems; and also for students of computer science, computer engineering and electrical engineering. It gives a much-needed 'big picture' for recently graduated engineers grappling with understanding the design of real-world systems for the first time, and provides professionals with a systems-level picture of the key elements that can go into an embedded design, providing a firm foundation on which to build their skills. - Real-world approach to the fundamentals, as well as the design and architecture process, makes this book a popular reference for the daunted or the inexperienced: if in doubt, the answer is in here! - Fully updated with new coverage of FPGAs, testing, middleware and the latest programming techniques in C, plus complete source code and sample code, reference designs and tools online make this the complete package - Visit the companion web site at http://booksite.elsevier.com/9780123821966/ for source code, design examples, data sheets and more - A true introductory book, provides a comprehensive get up and running reference for those new to the field, and updating skills: assumes no prior knowledge beyond undergrad level electrical engineering - Addresses the needs of practicing engineers, enabling it to get to the point more directly, and cover more ground. Covers hardware, software and middleware in a single volume - Includes a library of design examples and design tools, plus a complete set of source code and embedded systems design tutorial materials from companion website

Download or read book Wi FiTM BluetoothTM ZigbeeTM and WiMaxTM written by Houda Labiod and published by Springer Science & Business Media. This book was released on 2007-08-30 with total page 327 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book provides a complete and detailed description of the recent wireless technologies including Wi-Fi, Bluetooth, ZigBee and WiMAX. These technologies are considered to be important topics in the telecommunication industry in the next decade. Some critical subjects are particularly developed such as security, quality of service, roaming and power conservation. The book also includes some chapters on practical aspects.

Download or read book IoT Fundamentals written by David Hanes and published by Cisco Press. This book was released on 2017-05-30 with total page 782 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, billions of devices are Internet-connected, IoT standards and protocols are stabilizing, and technical professionals must increasingly solve real problems with IoT technologies. Now, five leading Cisco IoT experts present the first comprehensive, practical reference for making IoT work. IoT Fundamentals brings together knowledge previously available only in white papers, standards documents, and other hard-to-find sources—or nowhere at all. The authors begin with a high-level overview of IoT and introduce key concepts needed to successfully design IoT solutions. Next, they walk through each key technology, protocol, and technical building block that combine into complete IoT solutions. Building on these essentials, they present several detailed use cases, including manufacturing, energy, utilities, smart+connected cities, transportation, mining, and public safety. Whatever your role or existing infrastructure, you’ll gain deep insight what IoT applications can do, and what it takes to deliver them. Fully covers the principles and components of next-generation wireless networks built with Cisco IOT solutions such as IEEE 802.11 (Wi-Fi), IEEE 802.15.4-2015 (Mesh), and LoRaWAN Brings together real-world tips, insights, and best practices for designing and implementing next-generation wireless networks Presents start-to-finish configuration examples for common deployment scenarios Reflects the extensive first-hand experience of Cisco experts

Download or read book Management Information Systems written by Kenneth C. Laudon and published by Pearson Educación. This book was released on 2004 with total page 618 pages. Available in PDF, EPUB and Kindle. Book excerpt: Management Information Systems provides comprehensive and integrative coverage of essential new technologies, information system applications, and their impact on business models and managerial decision-making in an exciting and interactive manner. The twelfth edition focuses on the major changes that have been made in information technology over the past two years, and includes new opening, closing, and Interactive Session cases.

Download or read book Software Defined Radio for Engineers written by Alexander M. Wyglinski and published by Artech House. This book was released on 2018-04-30 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the popular Artech House classic, Digital Communication Systems Engineering with Software-Defined Radio, this book provides a practical approach to quickly learning the software-defined radio (SDR) concepts needed for work in the field. This up-to-date volume guides readers on how to quickly prototype wireless designs using SDR for real-world testing and experimentation. This book explores advanced wireless communication techniques such as OFDM, LTE, WLA, and hardware targeting. Readers will gain an understanding of the core concepts behind wireless hardware, such as the radio frequency front-end, analog-to-digital and digital-to-analog converters, as well as various processing technologies. Moreover, this volume includes chapters on timing estimation, matched filtering, frame synchronization message decoding, and source coding. The orthogonal frequency division multiplexing is explained and details about HDL code generation and deployment are provided. The book concludes with coverage of the WLAN toolbox with OFDM beacon reception and the LTE toolbox with downlink reception. Multiple case studies are provided throughout the book. Both MATLAB and Simulink source code are included to assist readers with their projects in the field.