Download or read book Nanoscience and Nanoengineering written by Ajit D. Kelkar and published by CRC Press. This book was released on 2014-05-28 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the breadth of the field from research to manufacturing, Nanoscience and Nanoengineering: Advances and Applications delivers an in-depth survey of emerging, high-impact nanotechnologies. Written by a multidisciplinary team of scientists and engineers and edited by prestigious faculty of the Joint School of Nanoscience and Nanoengineering, this book focuses on important breakthroughs in nanoelectronics, nanobiology, nanomedicine, nanomodeling, nanolithography, nanofabrication, and nanosafety. This authoritative text: Addresses concerns regarding the use of nanomaterials Discusses the advantages of nanocomposites versus conventional materials Explores self-assembly and its potential for nanomanufacturing applications Covers compound semiconductors and their applications in communications Considers display technology and infrared optics in relation to nanoelectronics Explains how computational nanotechnology is critical to the design of process materials and nanobiotechnologies Describes the design and fabrication of nanoelectromechanical systems (NEMS) and their applications in nanomedicine By seamlessly integrating interdisciplinary foundational science with state-of-the-art engineering tools, Nanoscience and Nanoengineering: Advances and Applications offers a holistic approach to understanding the mechanisms underpinning the nanotechnology-based products we enjoy today, as well as those that will change our society in the near future.

Download or read book Handbook of Mems for Wireless and Mobile Applications written by Deepak Uttamchandani and published by Elsevier. This book was released on 2013-08-31 with total page 640 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demand for mobile and wireless sensing necessitates the use of highly integrated technology featuring small size, low weight, high performance and low cost: micro-electro-mechanical systems (MEMS) can meet this need. The Handbook of MEMS for wireless and mobile applications provides a comprehensive overview of radio frequency (RF) MEMS technologies and explores the use of these technologies over a wide range of application areas.Part one provides an introduction to the use of RF MEMS as an enabling technology for wireless applications. Chapters review RF MEMS technology and applications as a whole before moving on to describe specific technologies for wireless applications including passive components, phase shifters and antennas. Packaging and reliability of RF MEMS is also discussed. Chapters in part two focus on wireless techniques and applications of wireless MEMS including biomedical applications, such as implantable MEMS, intraocular pressure sensors and wireless drug delivery. Further chapters highlight the use of RF MEMS for automotive radar, the monitoring of telecommunications reliability using wireless MEMS and the use of optical MEMS displays in portable electronics.With its distinguished editor and international team of expert authors, the Handbook of MEMS for wireless and mobile applications is a technical resource for MEMS manufacturers, the electronics industry, and scientists, engineers and academics working on MEMS and wireless systems. - Reviews the use of radio frequency (RF) MEMS as an enabling technology for wireless applications - Discusses wireless techniques and applications of wireless MEMS, including biomedical applications - Describes monitoring structures and the environment with wireless MEMS

Download or read book Autonomous Positioning of Piezoactuated Mechanism for Biological Cell Puncture written by Mingyang Xie and published by CRC Press. This book was released on 2023-06-02 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Autonomous Positioning of Piezoactuated Mechanism for Biological Cell Puncture gives a systematic and almost self-contained description of the many facets of advanced design, optimization, modeling, system identification, and advanced control techniques for positioning of the cell puncture mechanism with a piezoelectric actuator in micro/nanorobotics systems. To achieve biomedical applications, reliability design, modeling, and precision control are essential for developing engineering systems. With the advances in mechanical design, dynamic modeling, system identification, and control techniques, it is possible to expand the advancements in reliability design, precision control, and quick actuation of micro/nanomanipulation systems to the robot’s applications at the micro- and nanoscales, especially for biomedical applications. This book unifies existing and emerging techniques concerning advanced design, modeling, and advanced control methodologies in micropuncture of biological cells using piezoelectric actuators with their practical biomedical applications. The book is an essential resource for researchers within robotics, mechatronics, biomedical engineering, and automatic control society, including both academic and industrial parts. KEY FEATURES • Provides a series of latest results in, including but not limited to, design, modeling, and control of micro/nanomanipulation systems utilizing piezoelectric actuators • Gives recent advances of theory, technological aspects, and applications of advanced modeling, control, and actuation methodologies in cell engineering applications • Presents simulation and experimental results to reflect the micro/nano manipulation practice and validate the performances of the developed design, analysis, and synthesis approaches

Download or read book Materials and Failures in MEMS and NEMS written by Atul Tiwari and published by John Wiley & Sons. This book was released on 2015-09-11 with total page 435 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fabrication of MEMS has been predominately achieved by etching the polysilicon material. However, new materials are in large demands that could overcome the hurdles in fabrication or manufacturing process. Although, an enormous amount of work being accomplished in the area, most of the information is treated as confidential or privileged. It is extremely hard to find the meaningful information for the new or related developments. This book is collection of chapters written by experts in MEMS and NEMS technology. Chapters are contributed on the development of new MEMS and NEMS materials as well as on the properties of these devices. Important properties such as residual stresses and buckling behavior in the devices are discussed as separate chapters. Various models have been included in the chapters that studies the mode and mechanism of failure of the MEMS and NEMS. This book is meant for the graduate students, research scholars and engineers who are involved in the research and developments of advanced MEMS and NEMS for a wide variety of applications. Critical information has been included for the readers that will help them in gaining precise control over dimensional stability, quality, reliability, productivity and maintenance in MEMS and NEMS. No such book is available in the market that addresses the developments and failures in these advanced devices.

Download or read book Advanced MEMS NEMS Fabrication and Sensors written by Zhuoqing Yang and published by Springer Nature. This book was released on 2021-10-12 with total page 312 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book begins by introducing new and unique fabrication, micromachining, and integration manufacturing methods for MEMS (Micro-Electro-Mechanical Systems) and NEMS (Nano-Electro-Mechanical Systems) devices, as well as novel nanomaterials for sensor fabrications. The second section focuses on novel sensors based on these emerging MEMS/NEMS fabrication methods, and their related applications in industrial, biomedical, and environmental monitoring fields, which makes up the sensing layer (or perception layer) in IoT architecture. This authoritative guide offers graduate students, postgraduates, researchers, and practicing engineers with state-of-the-art processes and cutting-edge technologies on MEMS /NEMS, micro- and nanomachining, and microsensors, addressing progress in the field and prospects for future development. Presents latest international research on MEMS/NEMS fabrication technologies and novel micro/nano sensors; Covers a broad spectrum of sensor applications; Written by leading experts in the field.

Download or read book Nanoscale Silicon Devices written by Shunri Oda and published by CRC Press. This book was released on 2018-09-03 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt: Is Bigger Always Better? Explore the Behavior of Very Small Devices as Described by Quantum Mechanics Smaller is better when it comes to the semiconductor transistor. Nanoscale Silicon Devices examines the growth of semiconductor device miniaturization and related advances in material, device, circuit, and system design, and highlights the use of device scaling within the semiconductor industry. Device scaling, the practice of continuously scaling down the size of metal-oxide-semiconductor field-effect transistors (MOSFETs), has significantly improved the performance of small computers, mobile phones, and similar devices. The practice has resulted in smaller delay time and higher device density in a chip without an increase in power consumption. This book covers recent advancements and considers the future prospects of nanoscale silicon (Si) devices. It provides an introduction to new concepts (including variability in scaled MOSFETs, thermal effects, spintronics-based nonvolatile computing systems, spin-based qubits, magnetoelectric devices, NEMS devices, tunnel FETs, dopant engineering, and single-electron transfer), new materials (such as high-k dielectrics and germanium), and new device structures in three dimensions. It covers the fundamentals of such devices, describes the physics and modeling of these devices, and advocates further device scaling and minimization of energy consumption in future large-scale integrated circuits (VLSI). Additional coverage includes: Physics of nm scaled devices in terms of quantum mechanics Advanced 3D transistors: tri-gate structure and thermal effects Variability in scaled MOSFET Spintronics on Si platform NEMS devices for switching, memory, and sensor applications The concept of ballistic transport The present status of the transistor variability and more An indispensable resource, Nanoscale Silicon Devices serves device engineers and academic researchers (including graduate students) in the fields of electron devices, solid-state physics, and nanotechnology.

Download or read book Nanoelectromechanical Systems written by Laurent Duraffourg and published by John Wiley & Sons. This book was released on 2015-06-02 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book will present the theoretical and technological elements of nanosystems. Among the different topics discussed, the authors include the electromechanical properties of NEMS, the scaling effects that give these their interesting properties for different applications and the current manufacturing processes. The authors aim to provide useful tools for future readers and will provide an accurate picture of current and future research in the field.

Download or read book Nanofabrication written by Zheng Cui (author) and published by Springer Nature. This book was released on with total page 418 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Robust Engineering Designs of Partial Differential Systems and Their Applications written by Bor-Sen Chen and published by CRC Press. This book was released on 2021-12-22 with total page 459 pages. Available in PDF, EPUB and Kindle. Book excerpt: Most systems in science, engineering, and biology are of partial differential systems (PDSs) modeled by partial differential equations. Many books about partial differential equations have been written by mathematicians and mainly address some fundamental mathematic backgrounds and discuss some mathematic properties of partial differential equations. Only a few books on PDSs have been written by engineers; however, these books have focused mainly on the theoretical stabilization analysis of PDSs, especially mechanical systems. This book investigates both robust stabilization control design and robust filter design and reference tracking control design in mechanical, signal processing, and control systems to fill a gap in the study of PDSs. Robust Engineering Designs of Partial Differential Systems and Their Applications offers some fundamental background in the first two chapters. The rest of the chapters focus on a specific design topic with a corresponding deep investigation into robust H∞ filtering, stabilization, or tracking design for more complex and practical PDSs under stochastic fluctuation and external disturbance. This book is aimed at engineers and scientists and addresses the gap between the theoretical stabilization results of PDSs in academic and practical engineering designs more focused on the robust H∞ filtering, stabilization, and tracking control problems of linear and nonlinear PDSs under intrinsic random fluctuation and external disturbance in industrial applications. Part I provides backgrounds on PDSs, such as Galerkin’s, and finite difference methods to approximate PDSs and a fuzzy method to approximate nonlinear PDSs. Part II examines robust H∞ filter designs for the robust state estimation of linear and nonlinear stochastic PDSs. And Part III treats robust H∞ stabilization and tracking control designs of linear and nonlinear PDSs. Every chapter focuses on an engineering design topic with both theoretical design analysis and practical design examples.

Download or read book Advances in Microfluidics written by Xiao-Ying Yu and published by BoD – Books on Demand. This book was released on 2016-11-23 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Increasing innovations and applications make microfluidics a versatile choice for researchers in many disciplines. This book consists of multiple review chapters that aim to cover recent advances and new applications of microfluidics in biology, electronics, energy, and materials sciences. It provides comprehensive views of various aspects of microfluidics ranging from fundamentals of fabrication, flow control, and droplet manipulation to the most recent exploration in emerging areas such as material synthesis, imaging and novel spectroscopy, and marriage with electronics. The chapters have many illustrations showcasing exciting results. This book should be useful for those who are eager to learn more about microfluidics as well as researchers who want to pick up new concepts and developments in this fast-growing field.

Download or read book Integrated Nanodevice and Nanosystem Fabrication written by Simon Deleonibus and published by CRC Press. This book was released on 2017-11-22 with total page 256 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since its invention, the integrated circuit has necessitated new process modules and numerous architectural changes to improve application performances, power consumption, and cost reduction. Silicon CMOS is now well established to offer the integration of several tens of billions of devices on a chip or in a system. At present, there are important challenges in the introduction of heterogeneous co-integration of materials and devices with the silicon CMOS 2D- and 3D-based platforms. New fabrication techniques allowing strong energy and variability efficiency come in as possible players to improve the various figures of merit of fabrication technology. Integrated Nanodevice and Nanosystem Fabrication: Breakthroughs and Alternatives is the second volume in the Pan Stanford Series on Intelligent Nanosystems. The book contains 8 chapters and is divided into two parts, the first of which reports breakthrough materials and techniques such as single ion implantation in silicon and diamond, graphene and 2D materials, nanofabrication using scanning probe microscopes, while the second tackles the scaling and architectural aspects of silicon devices through HiK scaling for nanoCMOS, nanoscale epitaxial growth of group IV semiconductors, design for variability co-optimization in SOI FinFETs, and nanowires for CMOS and diversifications.

Download or read book Proceedings of the 6th International Conference on Electrical Control and Computer Engineering written by Zainah Md. Zain and published by Springer Nature. This book was released on 2022-03-08 with total page 1148 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the proceedings of the 6th International Conference on Electrical, Control and Computer Engineering (InECCE 2021), held in Kuantan, Pahang, Malaysia, on 23 August 2021. The topics covered are sustainable energy, power electronics and drives and power engineering including distributed/renewable generation, power system optimization, artificial/computational intelligence, smart grid, power system protection and machine learning energy management and conservation. The book showcases some of the latest technologies and applications developed to solve local energy and power problems in order to ensure continuity, reliability and security of electricity for future generations. It also links topics covered the sustainable developed goals (SDGs) areas outlined by the United Nation for global sustainability. The book will appeal to professionals, scientists and researchers with experience in industry.

Download or read book 3D and Circuit Integration of MEMS written by Masayoshi Esashi and published by John Wiley & Sons. This book was released on 2021-03-16 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Explore heterogeneous circuit integration and the packaging needed for practical applications of microsystems MEMS and system integration are important building blocks for the “More-Than-Moore” paradigm described in the International Technology Roadmap for Semiconductors. And, in 3D and Circuit Integration of MEMS, distinguished editor Dr. Masayoshi Esashi delivers a comprehensive and systematic exploration of the technologies for microsystem packaging and heterogeneous integration. The book focuses on the silicon MEMS that have been used extensively and the technologies surrounding system integration. You’ll learn about topics as varied as bulk micromachining, surface micromachining, CMOS-MEMS, wafer interconnection, wafer bonding, and sealing. Highly relevant for researchers involved in microsystem technologies, the book is also ideal for anyone working in the microsystems industry. It demonstrates the key technologies that will assist researchers and professionals deal with current and future application bottlenecks. Readers will also benefit from the inclusion of: A thorough introduction to enhanced bulk micromachining on MIS process, including pressure sensor fabrication and the extension of MIS process for various advanced MEMS devices An exploration of epitaxial poly Si surface micromachining, including process condition of epi-poly Si, and MEMS devices using epi-poly Si Practical discussions of Poly SiGe surface micromachining, including SiGe deposition and LP CVD polycrystalline SiGe A concise treatment of heterogeneously integrated aluminum nitride MEMS resonators and filters Perfect for materials scientists, electronics engineers, and electrical and mechanical engineers, 3D and Circuit Integration of MEMS will also earn a place in the libraries of semiconductor physicists seeking a one-stop reference for circuit integration and the practical application of microsystems.

Download or read book Advanced Ceramic and Metallic Coating and Thin Film Materials for Energy and Environmental Applications written by Jing Zhang and published by Springer. This book was released on 2017-07-16 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book explores the recent developments, perspectives on future research, and pertinent data from academia, industry, and government research laboratory to discuss fundamental mechanisms as well as processing and applications of advanced metallic and ceramic thin film and coating materials for energy and environmental applications. It is a platform to disseminate the latest research progress related to processing, characterization, and modelling. The authors address both thermal barrier and environmental coatings; magnetic and thermoelectric materials; and solar cell and solid oxide fuel cell materials. It is appropriate supplementary reading for students and primary reading for researchers in materials science and engineering.

Download or read book MEMS and Microfluidics in Healthcare written by Koushik Guha and published by Springer Nature. This book was released on 2023-03-13 with total page 251 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book introduces the research significance of biomedical instrumentation and discusses micro-fabrication techniques utilized for biomedical devices. This book primarily focuses on the reader enlightenment on MEMS medical devices by introducing all the diagnostic devices and treatment tools at one place. The book covers in-depth technical works and general introductions to the devices such that the book can reach technical as well as non-technical readers.

Download or read book Polymeric Nanocomposites with Carbonaceous Nanofillers for Aerospace Applications written by Ayesha Kausar and published by Woodhead Publishing. This book was released on 2022-10-06 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Polymeric Nanocomposites with Carbonaceous Nanofillers for Aerospace Applications offers a comprehensive paperback on the aerospace relevance of polymer/carbonaceous nanofiller-based nanocomposite. This manuscript summarizes all specific information on the design, fabrication and application areas of aerospace industry that employ polymer/carbonaceous nanofiller-based nanocomposites. In addition, it points to the potential of aeronautical nanocomposites towards lightning strike, radiation shielding, anti-corrosion, electronic/optical features, thermal management, antistatic application, self-healing aptitude, and green nanocomposites. The modeling of mechanical and essential properties of aerospace nanocomposites is also discussed, along with challenges and future forecasts of polymer/carbonaceous nanofiller nanocomposites. - Focuses on essential aerospace composites, carbonaceous nanofillers, and ensuing polymer/carbonaceous nanofiller-based nanocomposites - Explores indispensable properties of aeronautical nanocomposites, modeling of physical properties, and combined influence of carbonaceous nanofillers and carbon fibers on space material properties - Includes up-to-date technical applications of polymer/carbonaceous nanofiller-based nanocomposites in design, mechanical robustness, heat resistance, non-flammability, anti-corrosion, radiation shielding, lightning strike prevention, electronic/optical features, antistatic application, self-healing, thermal management, and green nanocomposites for aeronautical relevance

Download or read book Algorithms and Architectures for Parallel Processing written by Joanna Kolodziej and published by Springer. This book was released on 2013-12-09 with total page 502 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two volume set LNCS 8285 and 8286 constitutes the proceedings of the 13th International Conference on Algorithms and Architectures for Parallel Processing, ICA3PP 2013, held in Vietri sul Mare, Italy in December 2013. The first volume contains 10 distinguished and 31 regular papers selected from 90 submissions and covering topics such as big data, multi-core programming and software tools, distributed scheduling and load balancing, high-performance scientific computing, parallel algorithms, parallel architectures, scalable and distributed databases, dependability in distributed and parallel systems, wireless and mobile computing. The second volume consists of four sections including 35 papers from one symposium and three workshops held in conjunction with ICA3PP 2013 main conference. These are 13 papers from the 2013 International Symposium on Advances of Distributed and Parallel Computing (ADPC 2013), 5 papers of the International Workshop on Big Data Computing (BDC 2013), 10 papers of the International Workshop on Trusted Information in Big Data (TIBiDa 2013) as well as 7 papers belonging to Workshop on Cloud-assisted Smart Cyber-Physical Systems (C-Smart CPS 2013).