Download or read book Modeling Identification and Simulation of Dynamical Systems written by P. P. J. van den Bosch and published by CRC Press. This book was released on 2020-12-17 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an in-depth introduction to the areas of modeling, identification, simulation, and optimization. These scientific topics play an increasingly dominant part in many engineering areas such as electrotechnology, mechanical engineering, aerospace, and physics. This book represents a unique and concise treatment of the mutual interactions among these topics. Techniques for solving general nonlinear optimization problems as they arise in identification and many synthesis and design methods are detailed. The main points in deriving mathematical models via prior knowledge concerning the physics describing a system are emphasized. Several chapters discuss the identification of black-box models. Simulation is introduced as a numerical tool for calculating time responses of almost any mathematical model. The last chapter covers optimization, a generally applicable tool for formulating and solving many engineering problems.

Download or read book Modeling Identification and Control of Robots written by W. Khalil and published by Butterworth-Heinemann. This book was released on 2004-07-01 with total page 503 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by two of Europe's leading robotics experts, this book provides the tools for a unified approach to the modelling of robotic manipulators, whatever their mechanical structure. No other publication covers the three fundamental issues of robotics: modelling, identification and control. It covers the development of various mathematical models required for the control and simulation of robots.·World class authority·Unique range of coverage not available in any other book·Provides a complete course on robotic control at an undergraduate and graduate level

Download or read book Simulation Modeling and Analysis with Expertfit Software written by Averill Law and published by McGraw-Hill Science/Engineering/Math. This book was released on 2006-07-21 with total page 792 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since the publication of the first edition in 1982, the goal of Simulation Modeling and Analysis has always been to provide a comprehensive, state-of-the-art, and technically correct treatment of all important aspects of a simulation study. The book strives to make this material understandable by the use of intuition and numerous figures, examples, and problems. It is equally well suited for use in university courses, simulation practice, and self study. The book is widely regarded as the “bible” of simulation and now has more than 100,000 copies in print. The book can serve as the primary text for a variety of courses; for example: • A first course in simulation at the junior, senior, or beginning-graduate-student level in engineering, manufacturing, business, or computer science (Chaps. 1 through 4, and parts of Chaps. 5 through 9). At the end of such a course, the students will be prepared to carry out complete and effective simulation studies, and to take advanced simulation courses. • A second course in simulation for graduate students in any of the above disciplines (most of Chaps. 5 through 12). After completing this course, the student should be familiar with the more advanced methodological issues involved in a simulation study, and should be prepared to understand and conduct simulation research. • An introduction to simulation as part of a general course in operations research or management science (part of Chaps. 1, 3, 5, 6, and 9).

Download or read book Modelling and Simulation written by Louis G. Birta and published by Springer Science & Business Media. This book was released on 2007-09-07 with total page 463 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a balanced and integrated presentation of modelling and simulation activity for both Discrete Event Dynamic Systems (DEDS) and Continuous Time Dynamic Systems (CYDS). The authors establish a clear distinction between the activity of modelling and that of simulation, maintaining this distinction throughout. The text offers a novel project-oriented approach for developing the modelling and simulation methodology, providing a solid basis for demonstrating the dependency of model structure and granularity on project goals. Comprehensive presentation of the verification and validation activities within the modelling and simulation context is also shown.

Download or read book Dynamic Modelling of Gas Turbines written by Gennady G. Kulikov and published by Springer Science & Business Media. This book was released on 2013-12-11 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Whereas other books in this area stick to the theory, this book shows the reader how to apply the theory to real engines. It provides access to up-to-date perspectives in the use of a variety of modern advanced control techniques to gas turbine technology.

Download or read book Control oriented Modelling and Identification written by Marco Lovera and published by IET. This book was released on 2015-01-07 with total page 409 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive book covers the state-of-the-art in control-oriented modelling and identification techniques. With contributions from leading researchers in the subject, Control-oriented Modelling and Identification: Theory and practice covers the main methods and tools available to develop advanced mathematical models suitable for control system design, including: object-oriented modelling and simulation; projection-based model reduction techniques; integrated modelling and parameter estimation; identification for robust control of complex systems; subspace-based multi-step predictors for predictive control; closed-loop subspace predictive control; structured nonlinear system identification; and linear fractional LPV model identification from local experiments using an H1-based glocal approach.

Download or read book Modelling and Identification with Rational Orthogonal Basis Functions written by Peter S.C. Heuberger and published by Springer Science & Business Media. This book was released on 2005-06-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: Models of dynamical systems are of great importance in almost all fields of science and engineering and specifically in control, signal processing and information science. A model is always only an approximation of a real phenomenon so that having an approximation theory which allows for the analysis of model quality is a substantial concern. The use of rational orthogonal basis functions to represent dynamical systems and stochastic signals can provide such a theory and underpin advanced analysis and efficient modelling. It also has the potential to extend beyond these areas to deal with many problems in circuit theory, telecommunications, systems, control theory and signal processing. Modelling and Identification with Rational Orthogonal Basis Functions affords a self-contained description of the development of the field over the last 15 years, furnishing researchers and practising engineers working with dynamical systems and stochastic processes with a standard reference work.

Download or read book Statistics Testing and Defense Acquisition written by National Research Council and published by National Academies Press. This book was released on 1998-05-08 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: For every weapons system being developed, the U.S. Department of Defense (DOD) must make a critical decision: Should the system go forward to full-scale production? The answer to that question may involve not only tens of billions of dollars but also the nation's security and military capabilities. In the milestone process used by DOD to answer the basic acquisition question, one component near the end of the process is operational testing, to determine if a system meets the requirements for effectiveness and suitability in realistic battlefield settings. Problems discovered at this stage can cause significant production delays and can necessitate costly system redesign. This book examines the milestone process, as well as the DOD's entire approach to testing and evaluating defense systems. It brings to the topic of defense acquisition the application of scientific statistical principles and practices.

Download or read book Process Modelling and Simulation written by César de Prada and published by MDPI. This book was released on 2019-09-23 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since process models are nowadays ubiquitous in many applications, the challenges and alternatives related to their development, validation, and efficient use have become more apparent. In addition, the massive amounts of both offline and online data available today open the door for new applications and solutions. However, transforming data into useful models and information in the context of the process industry or of bio-systems requires specific approaches and considerations such as new modelling methodologies incorporating the complex, stochastic, hybrid and distributed nature of many processes in particular. The same can be said about the tools and software environments used to describe, code, and solve such models for their further exploitation. Going well beyond mere simulation tools, these advanced tools offer a software suite built around the models, facilitating tasks such as experiment design, parameter estimation, model initialization, validation, analysis, size reduction, discretization, optimization, distributed computation, co-simulation, etc. This Special Issue collects novel developments in these topics in order to address the challenges brought by the use of models in their different facets, and to reflect state of the art developments in methods, tools and industrial applications.

Download or read book Artificial Higher Order Neural Networks for Modeling and Simulation written by Zhang, Ming and published by IGI Global. This book was released on 2012-10-31 with total page 455 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book introduces Higher Order Neural Networks (HONNs) to computer scientists and computer engineers as an open box neural networks tool when compared to traditional artificial neural networks"--Provided by publisher.

Download or read book Discrete Choice Methods with Simulation written by Kenneth Train and published by Cambridge University Press. This book was released on 2009-07-06 with total page 399 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book describes the new generation of discrete choice methods, focusing on the many advances that are made possible by simulation. Researchers use these statistical methods to examine the choices that consumers, households, firms, and other agents make. Each of the major models is covered: logit, generalized extreme value, or GEV (including nested and cross-nested logits), probit, and mixed logit, plus a variety of specifications that build on these basics. Simulation-assisted estimation procedures are investigated and compared, including maximum stimulated likelihood, method of simulated moments, and method of simulated scores. Procedures for drawing from densities are described, including variance reduction techniques such as anithetics and Halton draws. Recent advances in Bayesian procedures are explored, including the use of the Metropolis-Hastings algorithm and its variant Gibbs sampling. The second edition adds chapters on endogeneity and expectation-maximization (EM) algorithms. No other book incorporates all these fields, which have arisen in the past 25 years. The procedures are applicable in many fields, including energy, transportation, environmental studies, health, labor, and marketing.

Download or read book Mastering System Identification in 100 Exercises written by Johan Schoukens and published by John Wiley & Sons. This book was released on 2012-04-02 with total page 285 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book enables readers to understand system identification and linear system modeling through 100 practical exercises without requiring complex theoretical knowledge. The contents encompass state-of-the-art system identification methods, with both time and frequency domain system identification methods covered, including the pros and cons of each. Each chapter features MATLAB exercises, discussions of the exercises, accompanying MATLAB downloads, and larger projects that serve as potential assignments in this learn-by-doing resource.

Download or read book Mathematical Modeling and Simulation written by Kai Velten and published by John Wiley & Sons. This book was released on 2009-06-01 with total page 362 pages. Available in PDF, EPUB and Kindle. Book excerpt: This concise and clear introduction to the topic requires only basic knowledge of calculus and linear algebra - all other concepts and ideas are developed in the course of the book. Lucidly written so as to appeal to undergraduates and practitioners alike, it enables readers to set up simple mathematical models on their own and to interpret their results and those of others critically. To achieve this, many examples have been chosen from various fields, such as biology, ecology, economics, medicine, agricultural, chemical, electrical, mechanical and process engineering, which are subsequently discussed in detail. Based on the author`s modeling and simulation experience in science and engineering and as a consultant, the book answers such basic questions as: What is a mathematical model? What types of models do exist? Which model is appropriate for a particular problem? What are simulation, parameter estimation, and validation? The book relies exclusively upon open-source software which is available to everybody free of charge. The entire book software - including 3D CFD and structural mechanics simulation software - can be used based on a free CAELinux-Live-DVD that is available in the Internet (works on most machines and operating systems).

Download or read book Identification Modeling and Characteristics of Miniature Rotorcraft written by Bernard Mettler and published by Springer Science & Business Media. This book was released on 2013-03-14 with total page 237 pages. Available in PDF, EPUB and Kindle. Book excerpt: Identification Modeling and Characteristics of Miniature Rotorcraft introduces an approach to developing a simple and effective linear parameterized model of vehicle dynamics using the CIFERâ identification tool created by the Army/NASA Rotorcraft Division. It also presents the first application of the advanced control system optimization tool CONDUITâ to systematically and efficiently tune control laws for a model-scale UAV helicopter against multiple and competing dynamic response criteria. Identification Modeling and Characteristics of Miniature Rotorcraft presents the detailed account of how the theory was developed, the experimentation performed, and how the results were used. This book will serve as a basic and illustrative guide for all students that are interested in developing autonomous flying helicopters.

Download or read book Mathematical and Computational Modeling and Simulation written by Dietmar P.F. Möller and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 438 pages. Available in PDF, EPUB and Kindle. Book excerpt: This introduction and textbook familiarizes engineers with the use of mathematical and computational modeling and simulation in a way that develops their understanding of the solution characteristics of a broad class of real-world problems. The relevant basic and advanced methodologies are explained in detail, with special emphasis on ill-defined problems. Some fifteen simulation systems are presented on the language and the logical level. Moreover, the reader also can accumulate an experiential overview by studying the wide variety of case studies spanning much of science and engineering. The latter are briefly described within the book but their full versions as well as some simulation software demos are available on the Web. The book can be used for courses on various levels as well as for self-study. Advanced sections are identified and can be skipped in a first reading or in undergraduate courses.

Download or read book Modeling and Simulation of Systems Using MATLAB and Simulink written by Devendra K. Chaturvedi and published by CRC Press. This book was released on 2017-12-19 with total page 734 pages. Available in PDF, EPUB and Kindle. Book excerpt: Not only do modeling and simulation help provide a better understanding of how real-world systems function, they also enable us to predict system behavior before a system is actually built and analyze systems accurately under varying operating conditions. Modeling and Simulation of Systems Using MATLAB® and Simulink® provides comprehensive, state-of-the-art coverage of all the important aspects of modeling and simulating both physical and conceptual systems. Various real-life examples show how simulation plays a key role in understanding real-world systems. The author also explains how to effectively use MATLAB and Simulink software to successfully apply the modeling and simulation techniques presented. After introducing the underlying philosophy of systems, the book offers step-by-step procedures for modeling different types of systems using modeling techniques, such as the graph-theoretic approach, interpretive structural modeling, and system dynamics modeling. It then explores how simulation evolved from pre-computer days into the current science of today. The text also presents modern soft computing techniques, including artificial neural networks, fuzzy systems, and genetic algorithms, for modeling and simulating complex and nonlinear systems. The final chapter addresses discrete systems modeling. Preparing both undergraduate and graduate students for advanced modeling and simulation courses, this text helps them carry out effective simulation studies. In addition, graduate students should be able to comprehend and conduct simulation research after completing this book.

Download or read book Flexible Robot Manipulators written by M. Osman Tokhi and published by IET. This book was released on 2008-05-20 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book discusses the latest developmens in modelling, simulation and control of flexible robot manipulators. Coverage includes an overall review of previously developed methodologies, a range of modelling approaches including classical techniques, parametric and neuromodelling approaches and numerical modelling/simulation techniques.