Download or read book VLSI CAD Tools and Applications written by Wolfgang Fichtner and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 555 pages. Available in PDF, EPUB and Kindle. Book excerpt: The summer school on VLSf GAD Tools and Applications was held from July 21 through August 1, 1986 at Beatenberg in the beautiful Bernese Oberland in Switzerland. The meeting was given under the auspices of IFIP WG 10. 6 VLSI, and it was sponsored by the Swiss Federal Institute of Technology Zurich, Switzerland. Eighty-one professionals were invited to participate in the summer school, including 18 lecturers. The 81 participants came from the following countries: Australia (1), Denmark (1), Federal Republic of Germany (12), France (3), Italy (4), Norway (1), South Korea (1), Sweden (5), United Kingdom (1), United States of America (13), and Switzerland (39). Our goal in the planning for the summer school was to introduce the audience into the realities of CAD tools and their applications to VLSI design. This book contains articles by all 18 invited speakers that lectured at the summer school. The reader should realize that it was not intended to publish a textbook. However, the chapters in this book are more or less self-contained treatments of the particular subjects. Chapters 1 and 2 give a broad introduction to VLSI Design. Simulation tools and their algorithmic foundations are treated in Chapters 3 to 5 and 17. Chapters 6 to 9 provide an excellent treatment of modern layout tools. The use of CAD tools and trends in the design of 32-bit microprocessors are the topics of Chapters 10 through 16. Important aspects in VLSI testing and testing strategies are given in Chapters 18 and 19.
Download or read book ICCAD 86 written by IEEE Computer Society and published by . This book was released on 1986 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Best of ICCAD written by Andreas Kuehlmann and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 699 pages. Available in PDF, EPUB and Kindle. Book excerpt: In 2002, the International Conference on Computer Aided Design (ICCAD) celebrates its 20th anniversary. This book commemorates contributions made by ICCAD to the broad field of design automation during that time. The foundation of ICCAD in 1982 coincided with the growth of Large Scale Integration. The sharply increased functionality of board-level circuits led to a major demand for more powerful Electronic Design Automation (EDA) tools. At the same time, LSI grew quickly and advanced circuit integration became widely avail able. This, in turn, required new tools, using sophisticated modeling, analysis and optimization algorithms in order to manage the evermore complex design processes. Not surprisingly, during the same period, a number of start-up com panies began to commercialize EDA solutions, complementing various existing in-house efforts. The overall increased interest in Design Automation (DA) re quired a new forum for the emerging community of EDA professionals; one which would be focused on the publication of high-quality research results and provide a structure for the exchange of ideas on a broad scale. Many of the original ICCAD volunteers were also members of CANDE (Computer-Aided Network Design), a workshop of the IEEE Circuits and Sys tem Society. In fact, it was at a CANDE workshop that Bill McCalla suggested the creation of a conference for the EDA professional. (Bill later developed the name).
Download or read book Fleet Management and Logistics written by Teodor G. Crainic and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 257 pages. Available in PDF, EPUB and Kindle. Book excerpt: TEODOR GABRIEL CRAINIC, DIRECTOR The Centre for Research on Transportation (C.R.T.) was founded in 1971 by the Universite de Montreal. From 1988 on, it is jointly managed by the Universite de Montreal and its affiliated schools, the Ecole des Hautes Etudes Commerciales and Ecole Poly technique. Professors, students and researchers from many institutions in the Montreal area join forces at the C.R.T. to analyze transportation, logistics and telecommunication systems from a multidisciplinary perspective. The C.R.T. pursues three major, complementary objectives: training of high-level specialists; the advancement of knowledge and technology; the transfer of technology towards industry and the public sector. Its main field of expertise is the develop ment of quantitative and computer-based models and methods for the analysis of urban, regional and intercity transportation networks, as well as telecommunication systems. This applies to the study of passenger and commodity flows, as well as to the socioeconomic aspects of transportation: policy, regulation, economics. The twenty-fifth anniversary of the C.R.T. offered the opportunity to evaluate past accomplishments and to identify future trends and challenges. Five colloquia were thus organized on major research and application themes that also reflected our main research areas. They gathered together internationally renowned researchers who linked recent scientific and technological advances to modeling and methodological challenges waiting to be tackled, particularly concerning new problems and applica tions, and the increasingly widespread use of new technologies.
Download or read book 1986 Proceedings written by Harold S. Stone and published by . This book was released on 1986 with total page 1288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICCAD 86 written by International Conference on C.omputer-Aided Design, Santa Clara and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Proceedings of the International Conference on Application Specific Array Processors written by José A. Fortes and published by . This book was released on 1992 with total page 720 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Facility Logistics written by Maher Lahmar and published by CRC Press. This book was released on 2007-12-13 with total page 338 pages. Available in PDF, EPUB and Kindle. Book excerpt: The design of facilities, warehouses, and material-handling systems as well as the management of logistics operations significantly impact the success of industrial projects. Facility Logistics: Approaches and Solutions to Next Generation Challenges explores recent developments in the technology, industrial practices, and business environments of f
Download or read book Introduction to Analog VLSI Design Automation written by Mohammed Ismail and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 191 pages. Available in PDF, EPUB and Kindle. Book excerpt: Very large scale integration (VLSI) technologies are now maturing with a current emphasis toward submicron structures and sophisticated applications combining digital as well as analog circuits on a single chip. Abundant examples are found on today's advanced systems for telecom munications, robotics, automotive electronics, image processing, intelli gent sensors, etc .. Exciting new applications are being unveiled in the field of neural computing where the massive use of analog/digital VLSI technologies will have a significant impact. To match such a fast technological trend towards single chip ana logi digital VLSI systems, researchers worldwide have long realized the vital need of producing advanced computer aided tools for designing both digital and analog circuits and systems for silicon integration. Ar chitecture and circuit compilation, device sizing and the layout genera tion are but a few familiar tasks on the world of digital integrated circuit design which can be efficiently accomplished by matured computer aided tools. In contrast, the art of tools for designing and producing analog or even analogi digital integrated circuits is quite primitive and still lack ing the industrial penetration and acceptance already achieved by digital counterparts. In fact, analog design is commonly perceived to be one of the most knowledge-intensive design tasks and analog circuits are still designed, largely by hand, by expert intimately familiar with nuances of the target application and integrated circuit fabrication process. The techniques needed to build good analog circuits seem to exist solely as expertise invested in individual designers.
Download or read book Electronic Design written by and published by . This book was released on 1986 with total page 990 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book The Synthesis Approach to Digital System Design written by Petra Michel and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 424 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over the past decade there has been a dramatic change in the role played by design automation for electronic systems. Ten years ago, integrated circuit (IC) designers were content to use the computer for circuit, logic, and limited amounts of high-level simulation, as well as for capturing the digitized mask layouts used for IC manufacture. The tools were only aids to design-the designer could always find a way to implement the chip or board manually if the tools failed or if they did not give acceptable results. Today, however, design technology plays an indispensable role in the design ofelectronic systems and is critical to achieving time-to-market, cost, and performance targets. In less than ten years, designers have come to rely on automatic or semi automatic CAD systems for the physical design ofcomplex ICs containing over a million transistors. In the past three years, practical logic synthesis systems that take into account both cost and performance have become a commercial reality and many designers have already relinquished control ofthe logic netlist level of design to automatic computer aids. To date, only in certain well-defined areas, especially digital signal process ing and telecommunications. have higher-level design methods and tools found significant success. However, the forces of time-to-market and growing system complexity will demand the broad-based adoption of high-level, automated methods and tools over the next few years.
Download or read book A Survey of High Level Synthesis Systems written by Robert A. Walker and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 190 pages. Available in PDF, EPUB and Kindle. Book excerpt: After long years of work that have seen little industrial application, high-level synthesis is finally on the verge of becoming a practical tool. The state of high-level synthesis today is similar to the state of logic synthesis ten years ago. At present, logic-synthesis tools are widely used in digital system design. In the future, high-level synthesis will play a key role in mastering design complexity and in truly exploiting the potential of ASIes and PLDs, which demand extremely short design cycles. Work on high-level synthesis began over twenty years ago. Since substantial progress has been made in understanding the basic then, problems involved, although no single universally-accepted theoretical framework has yet emerged. There is a growing number of publications devoted to high-level synthesis, specialized workshops are held regularly, and tutorials on the topic are commonly held at major conferences. This book gives an extensive survey of the research and development in high-level synthesis. In Part I, a short tutorial explains the basic concepts used in high-level synthesis, and follows an example design throughout the synthesis process. In Part II, current high-level synthesis systems are surveyed.
Download or read book Architecture and CAD for Deep Submicron FPGAS written by Vaughn Betz and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: Since their introduction in 1984, Field-Programmable Gate Arrays (FPGAs) have become one of the most popular implementation media for digital circuits and have grown into a $2 billion per year industry. As process geometries have shrunk into the deep-submicron region, the logic capacity of FPGAs has greatly increased, making FPGAs a viable implementation alternative for larger and larger designs. To make the best use of these new deep-submicron processes, one must re-design one's FPGAs and Computer- Aided Design (CAD) tools. Architecture and CAD for Deep-Submicron FPGAs addresses several key issues in the design of high-performance FPGA architectures and CAD tools, with particular emphasis on issues that are important for FPGAs implemented in deep-submicron processes. Three factors combine to determine the performance of an FPGA: the quality of the CAD tools used to map circuits into the FPGA, the quality of the FPGA architecture, and the electrical (i.e. transistor-level) design of the FPGA. Architecture and CAD for Deep-Submicron FPGAs examines all three of these issues in concert. In order to investigate the quality of different FPGA architectures, one needs CAD tools capable of automatically implementing circuits in each FPGA architecture of interest. Once a circuit has been implemented in an FPGA architecture, one next needs accurate area and delay models to evaluate the quality (speed achieved, area required) of the circuit implementation in the FPGA architecture under test. This book therefore has three major foci: the development of a high-quality and highly flexible CAD infrastructure, the creation of accurate area and delay models for FPGAs, and the study of several important FPGA architectural issues. Architecture and CAD for Deep-Submicron FPGAs is an essential reference for researchers, professionals and students interested in FPGAs.
Download or read book Local Search in Combinatorial Optimization written by Emile Aarts and published by Princeton University Press. This book was released on 2018-06-05 with total page 525 pages. Available in PDF, EPUB and Kindle. Book excerpt: In the past three decades, local search has grown from a simple heuristic idea into a mature field of research in combinatorial optimization that is attracting ever-increasing attention. Local search is still the method of choice for NP-hard problems as it provides a robust approach for obtaining high-quality solutions to problems of a realistic size in reasonable time. Local Search in Combinatorial Optimization covers local search and its variants from both a theoretical and practical point of view, each topic discussed by a leading authority. This book is an important reference and invaluable source of inspiration for students and researchers in discrete mathematics, computer science, operations research, industrial engineering, and management science. In addition to the editors, the contributors are Mihalis Yannakakis, Craig A. Tovey, Jan H. M. Korst, Peter J. M. van Laarhoven, Alain Hertz, Eric Taillard, Dominique de Werra, Heinz Mühlenbein, Carsten Peterson, Bo Söderberg, David S. Johnson, Lyle A. McGeoch, Michel Gendreau, Gilbert Laporte, Jean-Yves Potvin, Gerard A. P. Kindervater, Martin W. P. Savelsbergh, Edward J. Anderson, Celia A. Glass, Chris N. Potts, C. L. Liu, Peichen Pan, Iiro Honkala, and Patric R. J. Östergård.
Download or read book Transputer Research and Applications 2 written by John A. Board and published by IOS Press. This book was released on 1990 with total page 466 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book ICCAD 86 written by International Conference on C.omputer-Aided Design, Santa Clara and published by . This book was released on 1986 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 6th IEEE International Workshop on Rapid System Prototyping written by Rudy Lauwereins and published by . This book was released on 1995 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: To help designers and developers of hardware/software systems knock together a working model more quickly, the 33 papers discuss models for system simulation and emulation in a hierarchical sense, software-to-hardware mapping, software prototyping and validation, prototyping environments of hardware
