Download or read book IBM TS7700 Release 3 3 written by Larry Coyne and published by IBM Redbooks. This book was released on 2017-04-11 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt: Note: The IBM TS7700 Release 4.0 Guide, SG24-8366 is available at: http://www.redbooks.ibm.com/abstracts/sg248366.html IBM® TS7700 is a family of mainframe virtual tape solutions that optimize data protection and business continuance for IBM z SystemsTM data. Through the use of virtualization and disk cache, the TS7700 family operates at disk speeds while maintaining compatibility with existing tape operations. Its fully integrated tiered storage hierarchy takes advantage of both disk and tape technologies to deliver performance for active data and best economics for inactive and archive data. This IBM Redbooks® publication describes the TS7700 R3.3 architecture, planning, migration, implementation, and operations. The latest TS7700 family of z Systems tape virtualization is offered as two models: IBM TS7720 features encryption-capable high-capacity cache that uses 3 TB SAS disk drives with RAID 6, which can scale to large capacities with the highest level of data protection. IBM TS7740 features encryption-capable 600 GB SAS drives with RAID 6 protection. Both models write data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and earlier IBM 3592 model tape drives that are installed in IBM TS3500 tape libraries. Physical tape support is optional on TS7720. TS7700 R3.3 also supports external key management for disk-based encryption by using IBM Security Key Lifecycle Manager. This book intended for system architects who want to integrate their storage systems for smoother operation.
Download or read book IBM TS7700 Release 3 3 written by Larry Coyne and published by . This book was released on 2016 with total page 962 pages. Available in PDF, EPUB and Kindle. Book excerpt: IBM® TS7700 is a family of mainframe virtual tape solutions that optimize data protection and business continuance for IBM z SystemsTM data. Through the use of virtualization and disk cache, the TS7700 family operates at disk speeds while maintaining compatibility with existing tape operations. Its fully integrated tiered storage hierarchy takes advantage of both disk and tape technologies to deliver performance for active data and best economics for inactive and archive data. This IBM Redbooks® publication describes the TS7700 R3.3 architecture, planning, migration, implementation, and operations. The latest TS7700 family of z Systems tape virtualization is offered as two models: IBM TS7720 features encryption-capable high-capacity cache that uses 3 TB SAS disk drives with RAID 6, which can scale to large capacities with the highest level of data protection. IBM TS7740 features encryption-capable 600 GB SAS drives with RAID 6 protection. Both models write data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and earlier IBM 3592 model tape drives that are installed in IBM TS3500 tape libraries. Physical tape support is optional on TS7720. TS7700 R3.3 also supports external key management for disk-based encryption by using IBM Security Key Lifecycle Manager. This book intended for system architects who want to integrate their storage systems for smoother operation.
Download or read book IBM TS7700 Release 4 2 Guide written by Larry Coyne and published by IBM Redbooks. This book was released on 2019-04-19 with total page 988 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication covers IBM TS7700 R4.2. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on over 20 years of virtual tape experience, the TS7760 now supports the ability to store virtual tape volumes in an object store. The TS7700 has supported off loading to physical tape for over two decades. Off loading to physical tape behind a TS7700 is utilized by hundreds of organizations around the world. Using the same hierarchical storage techniques, the TS7700 can also off load to object storage. Given object storage is cloud based and accessible from different regions, the TS7760 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of the release of this document, the TS7760C supports the ability to off load to IBM Cloud Object Storage as well as Amazon S3. To learn about the TS7760 cloud storage tier function, planning, implementation, best practices, and support see IBM Redpaper IBM TS7760 R4.2 Cloud Storage Tier Guide, redp-5514 at: http://www.redbooks.ibm.com/abstracts/redp5514.html The IBM TS7700 offers a modular, scalable, and high-performance architecture for mainframe tape virtualization for the IBM Z® environment. It is a fully integrated, tiered storage hierarchy of disk and tape. This storage hierarchy is managed by robust storage management microcode with extensive self-management capability. It includes the following advanced functions: Improved reliability and resiliency Reduction in the time that is needed for the backup and restore process Reduction of services downtime that is caused by physical tape drive and library outages Reduction in cost, time, and complexity by moving primary workloads to virtual tape More efficient procedures for managing daily backup and restore processing Infrastructure simplification through reduction of the number of physical tape libraries, drives, and media TS7700 delivers the following new capabilities: TS7760C supports the ability to off load to IBM Cloud Object Storage as well as Amazon S3 8-way Grid Cloud consisting of any generation of TS7700 Synchronous and asynchronous replication Tight integration with IBM Z and DFSMS policy management Optional Transparent Cloud Tiering Optional integration with physical tape Cumulative 16Gb FICON throughput up to 4.8GB/s 8 IBM Z hosts view up to 496 8 equivalent devices Grid access to all data independent of where it exists The TS7760T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1150 and IBM TS1140 tape drives installed in an IBM TS4500 or TS3500 tape library. The TS7760 models are based on high-performance and redundant IBM POWER8® technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.
Download or read book IBM TS7700 Release 5 2 2 Guide written by Larry Coyne and published by IBM Redbooks. This book was released on 2022-07-07 with total page 1076 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication covers IBM TS7700 R5.2. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on 25 years of experience, the R5.2 release includes many features that enable improved performance, usability, and security. Highlights include IBM TS7700 Advanced Object Store, an all flash TS7770, grid resiliency enhancements, and Logical WORM retention. By using the same hierarchical storage techniques, the TS7700 (TS7770 and TS7760) can also off load to object storage. Because object storage is cloud-based and accessible from different regions, the TS7700 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of this writing, the TS7700C supports the ability to off load to IBM Cloud® Object Storage, Amazon S3, and RSTOR. This publication explains features and concepts that are specific to the IBM TS7700 as of release R5.2. The R5.2 microcode level provides IBM TS7700 Cloud Storage Tier enhancements, IBM DS8000® Object Storage enhancements, Management Interface dual control security, and other smaller enhancements. The R5.2 microcode level can be installed on the IBM TS7770 and IBM TS7760 models only. Note: The latest Release 5.2 was split into two phases: R5.2 Phase 1 (also referred to as and ) R5.2 Phase 2 ( and R) TS7700 provides tape virtualization for the IBM z environment. Off loading to physical tape behind a TS7700 is used by hundreds of organizations around the world. Tape virtualization can help satisfy the following requirements in a data processing environment. New and existing capabilities of the TS7700 5.2.2 release includes the following highlights: Eight-way Grid Cloud, which consists of up to three generations of TS7700 Synchronous and asynchronous replication of virtual tape and TCT objects Grid access to all logical volume and object data that is independent of where it exists An all-flash TS7770 option for improved performance Full Advanced Object Store Grid Cloud support of DS8000 Transparent Cloud Tier Full AES256 encryption for data that is in-flight and at-rest Tight integration with IBM Z® and DFSMS policy management DS8000 Object Store AES256 in-flight encryption and compression Regulatory compliance through Logical WORM and LWORM Retention support Cloud Storage Tier support for archive, logical volume version, and disaster recovery Optional integration with physical tape 16 Gb IBM FICON® throughput that exceeds 5 GBps per TS7700 cluster Grid Resiliency Support with Control Unit Initiated Reconfiguration (CUIR) support IBM Z hosts view up to 3,968 common devices per TS7700 grid TS7770 Cache On-demand feature that is based capacity licensing TS7770 support of SSD within the VED server The TS7700T writes data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1160, IBM TS1150, and IBM TS1140 tape drives that are installed in an IBM TS4500 or TS3500 tape library. The TS7770 models are based on high-performance and redundant IBM POWER9TM technology. They provide improved performance for most IBM Z tape workloads when compared to the previous generations of IBM TS7700.
Download or read book IBM TS7700 Series DS8000 Object Store User s Guide Version 2 0 written by Lourie Goodall and published by IBM Redbooks. This book was released on 2021-03-22 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: The IBM® TS7700 features a functional enhancement that allows for the TS7700 to act as an object store for transparent cloud tiering with IBM DS8000® (DS8K), DFSMShsm (HSM), and native DFSMSdss (DSS). This function can be used to move data sets directly from DS8000 to TS7700. This IBM Redpaper publication describes the client value, and how DFSMS, DS8000, and TS7700 are set up to enable and use the function.
Download or read book Smarter Business Dynamic Information with IBM InfoSphere Data Replication CDC written by Chuck Ballard and published by IBM Redbooks. This book was released on 2012-03-12 with total page 484 pages. Available in PDF, EPUB and Kindle. Book excerpt: To make better informed business decisions, better serve clients, and increase operational efficiencies, you must be aware of changes to key data as they occur. In addition, you must enable the immediate delivery of this information to the people and processes that need to act upon it. This ability to sense and respond to data changes is fundamental to dynamic warehousing, master data management, and many other key initiatives. A major challenge in providing this type of environment is determining how to tie all the independent systems together and process the immense data flow requirements. IBM® InfoSphere® Change Data Capture (InfoSphere CDC) can respond to that challenge, providing programming-free data integration, and eliminating redundant data transfer, to minimize the impact on production systems. In this IBM Redbooks® publication, we show you examples of how InfoSphere CDC can be used to implement integrated systems, to keep those systems updated immediately as changes occur, and to use your existing infrastructure and scale up as your workload grows. InfoSphere CDC can also enhance your investment in other software, such as IBM DataStage® and IBM QualityStage®, IBM InfoSphere Warehouse, and IBM InfoSphere Master Data Management Server, enabling real-time and event-driven processes. Enable the integration of your critical data and make it immediately available as your business needs it.
Download or read book IBM Virtualization Engine TS7700 with R 2 0 written by Karan Singh and published by IBM Redbooks. This book was released on 2012-02-20 with total page 978 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication highlights TS7700 Virtualization Engine Release 2.0. It is intended for system architects who want to integrate their storage systems for smoother operation. The IBM Virtualization Engine TS7700 offers a modular, scalable, and high-performing architecture for mainframe tape virtualization for the IBM System z® environment. It integrates 3592 Tape Drives, high-performance disks, and the new IBM System p® server into a storage hierarchy. This storage hierarchy is managed by robust storage management firmware with extensive self-management capability. It includes the following advanced functions: Policy management to control physical volume pooling Cache management Dual copy, including across a grid network Copy mode control The TS7700 Virtualization Engine offers enhanced statistical reporting. It also includes a standards-based management interface for TS7700 Virtualization Engine management. The new IBM Virtualization Engine TS7700 Release 2.0 introduces the next generation of TS7700 Virtualization Engine servers for System z tape: IBM Virtualization Engine TS7720 Server Model VEB IBM Virtualization Engine TS7740 Server Model V07 These Virtualization Engines are based on IBM POWER7® technology. They offer improved performance for most System z tape workloads compared to the first generation of TS7700 Virtualization Engine servers.
Download or read book IBM TS7760 R4 2 Cloud Storage Tier Guide written by Sosuke Matsui and published by IBM Redbooks. This book was released on 2019-06-14 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: Building on over 20 years of virtual tape experience, the TS7760 now supports the ability to store virtual tape volumes in an object store. This IBM Redpaper publication helps you set up and configure the new cloud object storage support for IBM Cloud Object Storage (COS) or Amazon Web Services (AWS). The TS7700 supported off loading to physical tape for over two decades. Off loading to physical tape behind a TS7700 is used by hundreds of organizations around the world. By using the same hierarchical storage techniques, the TS7700 can also off load to object storage. Because object storage is cloud-based and accessible from different regions, the TS7760 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. In this IBM Redpaper publication, we provide a brief overview of cloud technology with an emphasis on Object Storage. Object Storage is used by a broad set of technologies, including those technologies that are exclusive to IBM Z®. The aim of this publication is to provide a basic understanding of cloud, Object Storage, and different ways it can be integrated into your environment. This Redpaper is intended for system architects and storage administrators with TS7700 experience who want to add the support of a Cloud Storage Tier to their TS7700 solution.
Download or read book IBM TS7700 Release 5 1 Guide written by Larry Coyne and published by . This book was released on 2021 with total page 1000 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication covers IBM TS7700 R5.1. The IBM TS7700 is part of a family of IBM Enterprise tape products. This book is intended for system architects and storage administrators who want to integrate their storage systems for optimal operation. Building on over 20 years of virtual tape experience, the TS7770 supports the ability to store virtual tape volumes in an object store. The TS7700 supported off loading to physical tape for over two decades. Off loading to physical tape behind a TS7700 is utilized by hundreds of organizations around the world. By using the same hierarchical storage techniques, the TS7700 (TS7770 and TS7760) can also off load to object storage. Because object storage is cloud-based and accessible from different regions, the TS7700 Cloud Storage Tier support essentially allows the cloud to be an extension of the grid. As of this writing, the TS7700C supports the ability to off load to IBM Cloud® Object Storage and Amazon S3. This publication explains features and concepts that are specific to the IBM TS7700 as of release R5.1. The R5.1 microcode level provides IBM TS7700 Cloud Storage Tier enhancements, IBM DS8000® Object Storage enhancements, Management Interface dual control security, and other smaller enhancements. The R5.1 microcode level can be installed on the IBM TS7770 and IBM TS7760 models only. TS7700 provides tape virtualization for the IBM z environment. Tape virtualization can help satisfy the following requirements in a data processing environment: Improved reliability and resiliency Reduction in the time that is needed for the backup and restore process Reduction of services downtime that is caused by physical tape drive and library outages Reduction in cost, time, and complexity by moving primary workloads to virtual tape Increased efficient procedures for managing daily batch, backup, recall, and restore processing On-premises and off-premises object store cloud storage support as an alternative to physical tape for archive and disaster recovery New and existing capabilities of the TS7700 5.1 include the following highlights: Eight-way Grid Cloud, which consists of up to three generations of TS7700 Synchronous and asynchronous replication Full AES256 encryption for replication data that is in-flight and at-rest Tight integration with IBM Z and DFSMS policy management Optional target for DS8000 Transparent Cloud Tier using DFSMS DS8000 Object Store AES256 in-flight encryption and compressi...
Download or read book ABCs of IBM z OS System Programming written by Jose Gilberto Biondo Jr. and published by IBM Redbooks. This book was released on 2018-01-19 with total page 178 pages. Available in PDF, EPUB and Kindle. Book excerpt: The ABCs of IBM z/OS® System Programming is a 13-volume collection that provides an introduction to the z/OS operating system and the hardware architecture. Whether you are a beginner or an experienced system programmer, the ABCs collection provides the information that you need to start your research into z/OS and related subjects. The ABCs collection serves as a powerful technical tool to help you become more familiar with z/OS in your current environment, or to help you evaluate platforms to consolidate your e-business applications. This edition is updated to z/OS Version 2 Release 3. The other volumes contain the following content: Volume 1: Introduction to z/OS and storage concepts, TSO/E, ISPF, JCL, SDSF, and z/OS delivery and installation Volume 2: z/OS implementation and daily maintenance, defining subsystems, IBM Job Entry Subsystem 2 (JES2) and JES3, link pack area (LPA), LNKLST, authorized libraries, System Modification Program Extended (SMP/E), IBM Language Environment Volume 4: Communication Server, TCP/IP, and IBM VTAM® Volume 5: Base and IBM Parallel Sysplex®, System Logger, Resource Recovery Services (RRS), global resource serialization (GRS), z/OS system operations, automatic restart manager (ARM), IBM Geographically Dispersed Parallel SysplexTM (IBM GDPS) Volume 6: Introduction to security, IBM RACF®, Digital certificates and PKI, Kerberos, cryptography and z990 integrated cryptography, zSeries firewall technologies, LDAP, and Enterprise Identity Mapping (EIM) Volume 7: Printing in a z/OS environment, Infoprint Server, and Infoprint Central Volume 8: An introduction to z/OS problem diagnosis Volume 9: z/OS UNIX System Services Volume 10: Introduction to IBM z/Architecture®, the IBM Z platform, IBM Z connectivity, LPAR concepts, HCD, and DS Storage Solution. Volume 11: Capacity planning, performance management, WLM, IBM RMFTM, and SMF Volume 12: WLM Volume 13: JES3, JES3 SDSF
Download or read book DFSMSrmm Primer written by Mary Lovelace and published by IBM Redbooks. This book was released on 2014-09-04 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: DFSMSrmm from IBM® is the full function tape management system available in IBM OS/390® and IBM z/OS®. With DFSMSrmm, you can manage all types of tape media at the shelf, volume, and data set level, simplifying the tasks of your tape librarian. Are you a new DFSMSrmm user? Then, this IBM Redbooks® publication introduces you to the DFSMSrmm basic concepts and functions. You learn how to manage your tape environment by implementing the DFSMSrmm management policies. Are you already using DFSMSrmm? In that case, this publication provides the most up-to-date information about the new functions and enhancements introduced with the latest release of DFSMSrmm. You will find useful information for implementing these new functions and getting more benefits from DFSMSrmm. Do you want to test DFSMSrmm functions? If you are using another tape management system and are thinking about converting to DFSMSrmm, you can start DFSMSrmm and run it in parallel with your current system for testing purposes. This book is intended to be a starting point for new professionals and a handbook for using the basic DFSMSrmm functions. To learn about some of the newer DFSMSrmm functions and features refer to Redbooks Publication What is New in DFSMSrmm, SG24-8529.
Download or read book IBM System Storage Business Continuity Part 1 Planning Guide written by Charlotte Brooks and published by IBM Redbooks. This book was released on 2007-03-07 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: A disruption to your critical business processes could leave the entire business exposed. Today's organizations face ever-escalating customer demands and expectations. There is no room for downtime. You need to provide your customers with continuous service because your customers have a lot of choices. Your competitors are standing ready to take your place. As you work hard to grow your business, you face the challenge of keeping your business running without a glitch. To remain competitive, you need a resilient IT infrastructure. This IBM Redbooks publication introduces the importance of Business Continuity in today's IT environments. It provides a comprehensive guide to planning for IT Business Continuity and can help you design and select an IT Business Continuity solution that is right for your business environment. We discuss the concepts, procedures, and solution selection for Business Continuity in detail, including the essential set of IT Business Continuity requirements that you need to identify a solution. We also present a rigorous Business Continuity Solution Selection Methodology that includes a sample Business Continuity workshop with step-by-step instructions in defining requirements. This book is meant as a central resource book for IT Business Continuity planning and design. The companion title to this book, IBM System Storage Business Continuity: Part 2 Solutions Guide, SG24-6548, describes detailed product solutions in the System Storage Resiliency Portfolio.
Download or read book IBM TS7700 Virtualization Engine with R3 2 written by Larry Coyne and published by . This book was released on 2015 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication highlights IBM TS7700 Virtualization Engine Release 3.2 (IBM TS7700). IBM TS7700 is part of a family of IBM System Storage® Enterprise tape products. This book is intended for system architects who want to integrate their storage systems for smoother operation. The IBM TS7700 offers a modular, scalable, and high-performing architecture for mainframe tape virtualization for the IBM System z® environment. It integrates IBM 3592 tape cartridges, high-performance disks, and a new disk cache subsystem into a storage hierarchy. This storage hierarchy is managed by robust storage management firmware with extensive self-management capability. It includes the following advanced functions: Policy management to control physical volume pooling Cache management Redundant copies, including across a grid network Copy mode control The IBM TS7700 Virtualization Engine offers enhanced statistical reporting. It also includes a standards-based Management Interface (MI) for IBM TS7700 management. The IBM TS7700 Release 3.2 continues the next generation of IBM TS7700 Virtualization Engine servers for System z tape: IBM TS7720 features encryption-capable, high-capacity cache using 3 terabyte (TB) serial-attached Small Computer System Interface (SAS) disk drives with Redundant Array of Independent Disks (RAID) 6, providing the ability to scale to very large capacities with the highest level of data protection. IBM TS7740 features encryption-capable 600 gigabyte (GB) SAS drives with RAID 6 protection. Both models write data by policy to physical tape through attachment to high-capacity, high-performance IBM TS1140 and earlier IBM 3592 model tape drives installed in IBM TS3500 tape libraries. Physical tape support is optional on IBM TS7720. These Virtualization Engines are based on IBM POWER7® technology. They offer improved performance for most System z tape workloads compared to the first generation of IBM TS7700 Virtualization Engine servers. IBM TS7700 Virtualization Engine Release 3.2 builds on the existing capabilities of the IBM TS7700 family. It also includes the following enhancements to the IBM TS7700 family: 25 GB logical volume sizes Options for attaching back-end physical tape to IBM TS7720 systems Up to eight repository partitions in a tape-attached IBM TS7720.
Download or read book IBM Spectrum Archive Enterprise Edition V1 3 2 2 Installation and Configuration Guide written by Hiroyuki Miyoshi and published by IBM Redbooks. This book was released on 2022-03-10 with total page 360 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication helps you with the planning, installation, and configuration of the new IBM Spectrum® Archive Enterprise Edition (EE) Version 1.3.2.2 for the IBM TS4500, IBM TS3500, IBM TS4300, and IBM TS3310 tape libraries. IBM Spectrum Archive Enterprise Edition enables the use of the LTFS for the policy management of tape as a storage tier in an IBM Spectrum Scale based environment. It also helps encourage the use of tape as a critical tier in the storage environment. This edition of this publication is the tenth edition of IBM Spectrum Archive Installation and Configuration Guide. IBM Spectrum Archive EE can run any application that is designed for disk files on a physical tape media. IBM Spectrum Archive EE supports the IBM Linear Tape-Open (LTO) Ultrium 9, 8, 7, 6, and 5 tape drives. and the IBM TS1160, TS1155, TS1150, and TS1140 tape drives. IBM Spectrum Archive EE can play a major role in reducing the cost of storage for data that does not need the access performance of primary disk. The use of IBM Spectrum Archive EE to replace disks with physical tape in tier 2 and tier 3 storage can improve data access over other storage solutions because it improves efficiency and streamlines management for files on tape. IBM Spectrum Archive EE simplifies the use of tape by making it transparent to the user and manageable by the administrator under a single infrastructure. This publication is intended for anyone who wants to understand more about IBM Spectrum Archive EE planning and implementation. This book is suitable for IBM customers, IBM Business Partners, IBM specialist sales representatives, and technical specialists.
Download or read book I O Configuration Using z OS HCD and HCM written by Karan Singh and published by IBM Redbooks. This book was released on 2010-05-18 with total page 462 pages. Available in PDF, EPUB and Kindle. Book excerpt: IBM® System z® servers offer a full range of connectivity options for attaching peripheral or internal devices for input and output to the server. At the other end of these connections are a variety of devices for data storage, printing, terminal I/O, and network routing. This combination of connectivity and hardware offer System z customers solutions to meet most connectivity requirements. However, to make use of these features, the System z server must be properly configured. This IBM Redbooks® publication takes a high-level look at the tools and processes involved in configuring a System z server. We provide an introduction to the System z channel subsystem and the terminology frequently used in the hardware definition process. We examine the features and functions of tools used in the hardware definition process, such as HCD, CHPID Mapping Tool, and HCM. We discuss the input and output of these tools (IODF, IOCP, IOCDS) and their relationship to one another. We also provide a high-level overview of the hardware configuration process (the flow of generating a valid I/O configuration). We provide configuration examples using both HCD and HCM. The book also discusses available new functions and guidelines for the effective use of HCD and HCM. This document is intended for system programmers and administrators who are responsible for defining and activating hardware changes to z/OS® and System z servers, and for the IBM representatives who need this information. General knowledge of z/OS and IOCP is assumed.
Download or read book IBM System Storage Open Systems Tape Encryption Solutions written by Alex Osuna and published by IBM Redbooks. This book was released on 2010-12-08 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: This IBM® Redbooks® publication discusses IBM System Storage Open Systems Tape Encryption solutions. It specifically describes Tivoli Key Lifecycle Manager (TKLM) Version 2, which is a Java software program that manages keys enterprise-wide and provides encryption-enabled tape drives with keys for encryption and decryption. The book explains various methods of managing IBM tape encryption. These methods differ in where the encryption policies reside, where key management is performed, whether a key manager is required, and if required, how the tape drives communicate with it. The security and accessibility characteristics of encrypted data create considerations for clients which do not exist with storage devices that do not encrypt data. Encryption key material must be kept secure from disclosure or use by any agent that does not have authority to it; at the same time it must be accessible to any agent that has both the authority and need to use it at the time of need. This book is written for readers who need to understand and use the various methods of managing IBM tape encryption.
Download or read book IBM Software Defined Storage Guide written by Larry Coyne and published by IBM Redbooks. This book was released on 2018-07-21 with total page 158 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today, new business models in the marketplace coexist with traditional ones and their well-established IT architectures. They generate new business needs and new IT requirements that can only be satisfied by new service models and new technological approaches. These changes are reshaping traditional IT concepts. Cloud in its three main variants (Public, Hybrid, and Private) represents the major and most viable answer to those IT requirements, and software-defined infrastructure (SDI) is its major technological enabler. IBM® technology, with its rich and complete set of storage hardware and software products, supports SDI both in an open standard framework and in other vendors' environments. IBM services are able to deliver solutions to the customers with their extensive knowledge of the topic and the experiences gained in partnership with clients. This IBM RedpaperTM publication focuses on software-defined storage (SDS) and IBM Storage Systems product offerings for software-defined environments (SDEs). It also provides use case examples across various industries that cover different client needs, proposed solutions, and results. This paper can help you to understand current organizational capabilities and challenges, and to identify specific business objectives to be achieved by implementing an SDS solution in your enterprise.