Download or read book Hypersonic Research Vehicle Hrv Real Time Flight Test Support Feasibility and Requirements Study Part 2 written by National Aeronautics and Space Administration (NASA) and published by Createspace Independent Publishing Platform. This book was released on 2018-07-04 with total page 44 pages. Available in PDF, EPUB and Kindle. Book excerpt: The requirements are assessed for the use of remote computation to support HRV flight testing. First, remote computational requirements were developed to support functions that will eventually be performed onboard operational vehicles of this type. These functions which either cannot be performed onboard in the time frame of initial HRV flight test programs because the technology of airborne computers will not be sufficiently advanced to support the computational loads required, or it is not desirable to perform the functions onboard in the flight test program for other reasons. Second, remote computational support either required or highly desirable to conduct flight testing itself was addressed. The use is proposed of an Automated Flight Management System which is described in conceptual detail. Third, autonomous operations is discussed and finally, unmanned operations. Rediess, Herman A. and Hewett, M. D. Unspecified Center NAS2-12670; RTOP 505-66-00...
Download or read book Hypersonic Research Vehicle HRV Real time Flight Test Support Feasibility and Requirements Study Part 2 Remote Computation Support for Flight Systems Functions written by and published by . This book was released on 1991 with total page 46 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hypersonic Research Vehicle HRV Real time Flight Test Support Feasibility and Requirements Study Part 1 Real time Flight Experiment Support written by and published by . This book was released on 1991 with total page 42 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 602 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalogue United States Public Documents written by and published by . This book was released on 1994-08 with total page 872 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Monthly Catalog of United States Government Publications written by and published by . This book was released on with total page 1136 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Annual Index written by and published by . This book was released on 1991 with total page 1128 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Government Reports Announcements Index written by and published by . This book was released on 1991 with total page 1022 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Scientific and Technical Aerospace Reports written by and published by . This book was released on 1991 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Dictionary of Acronyms and Technical Abbreviations written by Jakob Vlietstra and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 703 pages. Available in PDF, EPUB and Kindle. Book excerpt: This Dictionary covers information and communication technology (ICT), including hardware and software; information networks, including the Internet and the World Wide Web; automatic control; and ICT-related computer-aided fields. The Dictionary also lists abbreviated names of relevant organizations, conferences, symposia and workshops. This reference is important for all practitioners and users in the areas mentioned above, and those who consult or write technical material. This Second Edition contains 10,000 new entries, for a total of 33,000.
Download or read book Design Theory written by Pascal Le Masson and published by Springer. This book was released on 2017-04-06 with total page 390 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook presents the core of recent advances in design theory and its implications for design methods and design organization. Providing a unified perspective on different design methods and approaches, from the most classic (systematic design) to the most advanced (C-K theory), it offers a unique and integrated presentation of traditional and contemporary theories in the field. Examining the principles of each theory, this guide utilizes numerous real life industrial applications, with clear links to engineering design, industrial design, management, economics, psychology and creativity. Containing a section of exams with detailed answers, it is useful for courses in design theory, engineering design and advanced innovation management. "Students and professors, practitioners and researchers in diverse disciplines, interested in design, will find in this book a rich and vital source for studying fundamental design methods and tools as well as the most advanced design theories that work in practice". Professor Yoram Reich, Tel Aviv University, Editor-in-Chief, Research In Engineering Design. "Twenty years of research in design theory and engineering have shown that training in creative design is indeed possible and offers remarkably operational methods - this book is indispensable for all leaders and practitioners who wish to strengthen theinnovation capacity of their company." Pascal Daloz, Executive Vice President, Dassault Systèmes
Download or read book Engineer in Charge written by James R. Hansen and published by . This book was released on 1987 with total page 670 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Space Elevators written by NASA and published by . This book was released on 2006-03-01 with total page 48 pages. Available in PDF, EPUB and Kindle. Book excerpt: What is a space elevator? A space elevator is a physical connection from the surface of the Earth to a geostationary Earth orbit (GEO) above the Earth .35,786 km in altitude. Its center of mass is at the geostationary point such that it has a 24-hr orbit and stays over the same point above the equator as the Earth rotates on its axis. The vision is that a space elevator would be utilized as a transportation and utility system for moving people, payloads, power, and gases between the surface of the Earth and space. It makes the physical connection from Earth to space in the same way a bridge connects two cities across a body of water. The Earth to GEO space elevator is not feasible today, but could be an important concept for the future development of space in the latter part of the 21st century. It has the potential to provide mass transportation to space in the same way highways, railroads, power lines, and pipelines provide mass transportation across the Earth's surface. The low energy requirements for moving payloads up and down the elevator could make it possible to achieve cost to orbit
Download or read book Hybrid Machining written by Xichun Luo and published by Academic Press. This book was released on 2018-06-27 with total page 328 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hybrid Machining: Theory, Methods, and Case Studies covers the scientific fundamentals, techniques, applications and real-world descriptions of emerging hybrid machining technology. This field is advancing rapidly in industrial and academic contexts, creating a great need for the fundamental and technical guidance that this book provides. The book includes discussions of basic concepts, process design principles, standard hybrid machining processes, multi-scale modeling approaches, design, on-machine metrology and work handling systems. Readers interested in manufacturing systems, product design or machining technology will find this one-stop guide to hybrid machining the ideal reference. - Includes tables of recommended processing parameters for key engineering materials/products for each hybrid machining process - Provides case studies covering real industrial applications - Explains how to use multiscale modeling for hybrid machining
Download or read book The First Outstanding 50 Years of Universit Politecnica delle Marche written by Sauro Longhi and published by Springer Nature. This book was released on 2020-01-03 with total page 212 pages. Available in PDF, EPUB and Kindle. Book excerpt: The book describes significant multidisciplinary research findings at the Università Politecnica delle Marche and the expected future advances. It addresses some of the most dramatic challenges posed by today’s fast-growing, global society and the changes it has caused, while also discussing solutions to improve the wellbeing of human beings. The book covers the main research achievements made in the social sciences and humanities, and includes chapters that focus on understanding mechanisms that are relevant to all aspects of economic and social interactions among individuals. In line with Giorgio Fuà’s contribution, the interdisciplinary research being pursued at the Faculty of Economics of Università Politecnica delle Marche is aimed at interpreting the process of economic development in all of its facets, both at the national and local level, with a particular focus on profit and non-profit organizations. Various disciplines are covered, from economics to sociology, history, statistics, mathematics, law, accounting, finance and management.
Download or read book Adaptive Dynamic Programming Single and Multiple Controllers written by Ruizhuo Song and published by Springer. This book was released on 2018-12-28 with total page 271 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a class of novel optimal control methods and games schemes based on adaptive dynamic programming techniques. For systems with one control input, the ADP-based optimal control is designed for different objectives, while for systems with multi-players, the optimal control inputs are proposed based on games. In order to verify the effectiveness of the proposed methods, the book analyzes the properties of the adaptive dynamic programming methods, including convergence of the iterative value functions and the stability of the system under the iterative control laws. Further, to substantiate the mathematical analysis, it presents various application examples, which provide reference to real-world practices.
Download or read book Verification of Disarmament Or Limitation of Armaments written by Serge Sur (jurist) and published by . This book was released on 1992 with total page 288 pages. Available in PDF, EPUB and Kindle. Book excerpt:
