Download or read book Hydraulics and Hydrology for Stormwater Management written by John E. Gribbin and published by Delmar. This book was released on 1997 with total page 401 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Urban Hydrology Hydraulics and Stormwater Quality written by A. Osman Akan and published by John Wiley & Sons. This book was released on 2003-08-22 with total page 384 pages. Available in PDF, EPUB and Kindle. Book excerpt: A practical introduction on today's challenge of controlling and managing the water resources used by and affected by cities and urbanized communities. The book offers an integrated engineering approach, covering the spectrum of urban watershed management, urban hydraulic systems, and overall stormwater management. Each chapter concludes with helpful problems. Solutions Manual available to qualified professors and instructors upon request. Introduces the reader to two popular, non-proprietary computer-modeling pro-grams: HEC-HMS (U.S. Army Corps of Engineers) and SWMM (U.S EPA).
Download or read book Introduction to Hydraulics Hydrology written by Gribbin and published by . This book was released on 2013 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Computational Hydraulics and Hydrology written by Nicolas G. Adrien and published by CRC Press. This book was released on 2003-08-13 with total page 468 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational hydraulics and hydrologic modeling are rapidly developing fields with a wide range of applications in areas ranging from wastewater disposal and stormwater management to civil and environmental engineering. These fields are full of promise, but the abundance of literature that now exists contains many new terms that are not always defined. Computational Hydraulics and Hydrology: An Illustrated Dictionary defines more that 4,000 basic terms and phrases related to water conveyance with emphasis on computational hydraulics and hydrologic modeling. Compiled by Nicolas G. Adrien, a noted consulting engineer with three decades of experience, this dictionary includes detailed references to actual modeling studies, nearly 100 illustrations, 150 equations and formulas, and many notations. It also includes a chapter of application examples and another containing more than 6,000 related terms with a list of resources where interested readers can find additional definitions. Other dictionaries and glossaries related to these areas tend to be either dated or much narrower in scope. This dictionary offers broad, practice-based coverage of terms culled directly from the latest texts, references, and actual engineering reports. Computational Hydraulics and Hydrology: An Illustrated Dictionary stands alone in providing ready access to the vocabulary of these subjects.
Download or read book Introduction to Hydraulics Hydrology With Applications for Stormwater Management written by John E. Gribbin and published by Cengage Learning. This book was released on 2013-01-01 with total page 560 pages. Available in PDF, EPUB and Kindle. Book excerpt: With its comprehensive coverage of hydraulics and hydrology in a non-calculus format, the Fourth Edition of INTRODUCTION TO HYDRAULICS & HYDROLOGY continues the same straightforward, practical approach that has made previous editions so popular. Designed to provide readers with an understanding of the concepts of hydraulics and surface water hydrology as they are used in everyday practice, this edition contains multiple opportunities for practice and real-world applications that are relevant to civil engineering, land developing, public works, and land surveying. Coverage includes topics such as the history of water engineering, basic concepts of computation and design, principles of hydrostatics and hydrodynamics, open channel flow, unit hydrographs, and rainfall, runoff, and routing. Up-to-date, clearly solved examples are included throughout the book to help readers understand how concepts apply in the real-world. Important Notice: Media content referenced within the product description or the product text may not be available in the ebook version.
Download or read book Urban Hydrology and Hydraulic Design written by James Chwen-Yuan Guo and published by Water Resources Publication. This book was released on 2006 with total page 524 pages. Available in PDF, EPUB and Kindle. Book excerpt: Latest developments of urban hydrology and hydraulic design procedures for storm water management.Drainage planning is an approach that integrates both local and regional efforts to identify drainage conveyance and storage facilities based on hydrologic optimization and cost minimization individually and collectively. In general, the first six chapters cover the hydrologic procedures for rainfall and runoff predictions, and the next 12 chapters focus on hydraulic designs of urban channel, culvert, street inlet, sewer drain, detention basin, retention basin, infiltration basin, low impact designs, and storm water modeling techniques by various routing methods.Hydrology analyses are lengthy in calculation and repetitive in procedure. As a result, Excel Spreadsheet is the most useful and handy tool for hydraulic and hydrologic designs. This book includes 18 sets of spreadsheets developed for 18 subjects. With these spreadsheets, it is easy for the reader to conduct sensitivity tests. Many of the design methods documented in this book have been adopted as the recommended design procedure by Denver, Las Vegas, and Sacramento metropolitan areas in the United States. Based on these methods, there are many design computer models that have been developed and supported by the Denver metro governments for stormwater design purposes.
Download or read book Hydrology and Hydraulics for Stormwater Management Engineering written by Bernard L. Golding and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydrology Hydraulics and Water Resources Management written by K.L. Katsifarakis and published by WIT Press. This book was released on 2012-07-11 with total page 175 pages. Available in PDF, EPUB and Kindle. Book excerpt: With population of our planet exceeding seven billion, funds for infrastructure works being limited worldwide and climate change affecting water resources, their optimal development and management is literally vital. This volume deals with application of some non-traditional optimization techniques to hydraulics, hydrology and water resources management and aims at helping scientists dealing with these issues to reach the best decisions. Chapter 1 is a brief introduction to optimization and its application to water resources management. Chapter 2 is dedicated to genetic algorithms. Chapter 3 focuses on applications of genetic algorithms to hydraulic networks, mainly irrigation ones. Chapter 4 is dedicated to simulated annealing. The particle swarm method (PSO) is discussed in Chapter 5. In Chapter 6 the basic concepts and features of Tabu search are presented and its coupling with other heuristic optimizers is discussed. Chapter 7 is dedicated to the Harmony Search method. Finally, Chapter 8 deals with the Outer Approximation method. This book is aimed at engineers and other scientists working on water resources management and hydraulic networks.
Download or read book Hydrology and Hydraulics for Stormwater Management Engineering multimedia written by Bernard L. Golding and published by . This book was released on 1996 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Stormwater Management for Land Development written by Thomas A. Seybert and published by Independently Published. This book was released on 2018-09-28 with total page 350 pages. Available in PDF, EPUB and Kindle. Book excerpt: Stormwater Management for Land Development is a unique book on hydrologic and hydraulic methods for developing stormwater management plans that only requires readers to understand algebra, trigonometry, and geometry. Beginning with the fundamentals, it walks readers through the ABCs of fluid mechanics and hydrology and presents practical methods and designs to control stormwater runoff. Useful to surveyors, engineers, and land development planners who may not have taken fluid mechanics or hydrology courses, this book features: * Sections on elementary fluid mechanics including statics, dynamics, and open channel flow * Sections on practical stormwater hydrology including design rainfall, travel time, and runoff methods * Material on the NRCS/SCS dimensionless unit hydrograph, tabular hydrograph, and WinTR-55 hydrograph procedures. * Design methods for stormwater conveyance including storm sewer, culvert and open channel designs * A detailed procedure for designing a multiple-stage outlet structure for multiple event detention requirements * More than ninety example problems illustrating fluid flow and hydrology calculation methods * More than 170 review problems at the end the chapters With more than 150 helpful illustrations, STORMWATER MANAGEMENT FOR LAND DEVELOPMENT is a comprehensive yet basic guide to hydraulics, hydrology, and methods for the analysis and design related to quantity control of stormwater runoff. Thomas A. Seybert, PhD, PE, is Professor Emeritus of Engineering in the Surveying Engineering program at The Pennsylvania State University, Wilkes-Barre Campus. He has over thirty years of experience in teaching engineering students at the college level and also professional land surveyors, engineers and land development planners through continuing education courses at Penn State. He has also taught stormwater workshops for the Pennsylvania Society of Land Surveyors for over twenty five years.
Download or read book Design and Construction of Urban Stormwater Management Systems written by American Society of Civil Engineers and published by ASCE Publications. This book was released on 1993-01-01 with total page 764 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared byØtheØTask Committee of the Urban Water Resources Research Council of ASCE. Copublished by ASCE and the Water Environment Federation. Design and Construction of Urban Stormwater Management Systems presents a comprehensive examination of the issues involved in engineering urban stormwater systems. This Manual?which updates relevant portions of Design and Construction of Sanitary and Storm Sewers, MOP 37?reflects the many changes taking place in the field, such as the use of microcomputers and the need to control the quality of runoff as well as the quantity. Chapters are prepared by authors with experience and expertise in the particular subject area. The Manual aids the practicing engineer by presenting a brief summary of currently accepted procedures relating to the following areas: financial services; regulations;Ø surveys and investigations;Ø design concepts and master planning;Ø hydrology and water quality;Ø storm drainage hydraulics; andØ computer modeling.
Download or read book Urban Flood Mitigation and Stormwater Management written by James C Y Guo and published by CRC Press. This book was released on 2017-05-08 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective urban drainage to manage stormwater and control flooding depends on good engineering, especially when an environmentally sustainable approach is being applied. This new text focuses on green methods and modelling techniques. It covers the principles of hydrology and drainage, low-impact-development (LID) designs, computer modelling techniques, the evaluation of existing systems, and planning for both new development and urban renewal. It outlines design procedures using examples, spreadsheet models, photos, and real-world design examples. Unlike other books, which focus on extreme events, this book covers hydrologic designs for both extreme and frequent events, and reflects the latest revolution in stormwater LID management, and takes a quantitative as well as a qualitative approach. PowerPoint® presentations and Excel® computer models are provided to follow and build on the exercises in the book. It is written especially for students on urban watershed courses, and also for those studying urban planning, landscaping, water resources, hydrology and hydraulics.
Download or read book Stormwater Management for Land Development written by Thomas A. Seybert and published by John Wiley & Sons. This book was released on 2006 with total page 400 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introductory guide to hydraulics, hydrology, and stormwater management design Stormwater Management for Land Development is a unique, much-needed book on developing stormwater management plans that only requires readers to understand algebra, trigonometry, and geometry. Beginning with the fundamentals, it walks readers through the ABCs of fluid mechanics and hydrology and presents practical methods and designs to control stormwater. Useful to the growing group of professional surveyors and engineers who may not have taken fluid mechanics or hydrology courses, Stormwater Management for Land Development features: Sections on elementary fluid mechanics including statics, dynamics, and open channel flow Sections on practical hydrology including design rainfall, travel time, and runoff methods Material on NRCS/SCS unit hydrograph and TR-55 tabular hydrograph procedures, with reference to the latest WinTR-55 variant Design methods for stormwater conveyance, including storm sewer, culvert, and open channel designs A detailed procedure for sizing and designing a multiple stage outlet structure for multiple event detention requirements More than seventy-five example problems illustrating fluid flow and hydrology calculation methods Review problems at the end of most chapters With more than 150 helpful illustrations, Stormwater Management for Land Development is the most comprehensive, basic guide to hydraulics, hydrology, and stormwater management design methods for quantity control.
Download or read book Urban Stormwater Hydrology written by Osman A. Akan and published by CRC Press. This book was released on 1993-02-28 with total page 284 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book and software package provides a concise, practical guide for those involved in studying, planning, and designing urban stormwater management practices. The emphasis is on engineering calculations rather than theory. Many facets of stormwater management, from rainfall analysis and design storm selection procedures to runoff calculations and the evaluation of wet ponds for long-term, efficient water quality control. The book presents broadly used conventional methods and innovative techniques that are in line with current trends and needs. The book also includes the Soil Conservation Service's TR-20 computer software and a new easy-to-follow user's guide. From the Preface There has been much interest in urban stormwater hydrology during the past two decades due to the widespread recognition of the adverse effects of urbanization on stormwater runoff. During this period, many individuals and organizations developed innovative techniques to estimate and control the quantity and the water quality of urban stormwater runoff.
Download or read book Water and Wastewater Engineering Volume 1 written by Lawrence K. Wang and published by John Wiley & Sons. This book was released on 2024-04-30 with total page 821 pages. Available in PDF, EPUB and Kindle. Book excerpt: The classic guide to water and wastewater engineering returns Water and wastewater engineering is a crucial branch of civil engineering, dealing with water resources and with the challenges posed by water and wastewater. Generations of engineers have developed techniques for purifying, desalinating, and transforming water and wastewater, techniques which have only grown more critical as climate change and global population growth create new challenges and opportunities. There has never been a more urgent need for a comprehensive guide to the management of water and its various engineering subdisciplines. Water and Wastewater Engineering: Hydraulics, Hydrology and Management, 4th edition offers key fundamentals in a practical context to engineers and engineering students. Updated to address growing urbanization and industrialization, with corresponding stress on water and wastewater systems, this vital textbook has been fully revised to reflect the latest research and case studies. This volume focuses primarily with hydrology and hydraulics, along with chapters treating groundwater and surface water sources. Readers of Hydraulics, Hydrology, and Management will also find: • Coverage of water supply, water sources, water distribution, and more • Detailed treatment of both sanitary sewer and urban stormwater drainage • In-depth analysis of infrastructure issues with respect to water resources, pumping, and handling This textbook is ideal for advanced students in civil, environmental, and chemical engineering departments, as well as for early career engineers, plant managers, and urban and regional planners.
Download or read book Urban Flood Mitigation and Stormwater Management written by James C Y Guo and published by CRC Press. This book was released on 2017-05-08 with total page 589 pages. Available in PDF, EPUB and Kindle. Book excerpt: Effective urban drainage to manage stormwater and control flooding depends on good engineering, especially when an environmentally sustainable approach is being applied. This new text focuses on green methods and modelling techniques. It covers the principles of hydrology and drainage, low-impact-development (LID) designs, computer modelling techniques, the evaluation of existing systems, and planning for both new development and urban renewal. It outlines design procedures using examples, spreadsheet models, photos, and real-world design examples. Unlike other books, which focus on extreme events, this book covers hydrologic designs for both extreme and frequent events, and reflects the latest revolution in stormwater LID management, and takes a quantitative as well as a qualitative approach. PowerPoint® presentations and Excel® computer models are provided to follow and build on the exercises in the book. It is written especially for students on urban watershed courses, and also for those studying urban planning, landscaping, water resources, hydrology and hydraulics.
Download or read book Fluid Mechanics Hydraulics Hydrology and Water Resources for Civil Engineers written by Amithirigala Widhanelage Jayawardena and published by CRC Press. This book was released on 2021-01-27 with total page 781 pages. Available in PDF, EPUB and Kindle. Book excerpt: One of the core areas of study in civil engineering concerns water that encompasses fluid mechanics, hydraulics and hydrology. Fluid mechanics provide the mathematical and scientific basis for hydraulics and hydrology that also have added empirical and practical contents. The knowledge contained in these three subjects is necessary for the optimal and equitable management of this precious resource that is not always available when and where it is needed, sometimes with conflicting demands. The objective of Fluid Mechanics, Hydraulics, Hydrology and Water Resources for Civil Engineers is to assimilate these core study areas into a single source of knowledge. The contents highlight the theory and applications supplemented with worked examples and also include comprehensive references for follow-up studies. The primary readership is civil engineering students who would normally go through these core subject areas sequentially spread over the duration of their studies. It is also a reference for practicing civil engineers in the water sector to refresh and update their skills.
