Download or read book Cost Effectiveness and Deployment of Fuel Economy Technologies for Light Duty Vehicles written by National Research Council and published by National Academies Press. This book was released on 2015-09-28 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: The light-duty vehicle fleet is expected to undergo substantial technological changes over the next several decades. New powertrain designs, alternative fuels, advanced materials and significant changes to the vehicle body are being driven by increasingly stringent fuel economy and greenhouse gas emission standards. By the end of the next decade, cars and light-duty trucks will be more fuel efficient, weigh less, emit less air pollutants, have more safety features, and will be more expensive to purchase relative to current vehicles. Though the gasoline-powered spark ignition engine will continue to be the dominant powertrain configuration even through 2030, such vehicles will be equipped with advanced technologies, materials, electronics and controls, and aerodynamics. And by 2030, the deployment of alternative methods to propel and fuel vehicles and alternative modes of transportation, including autonomous vehicles, will be well underway. What are these new technologies - how will they work, and will some technologies be more effective than others? Written to inform The United States Department of Transportation's National Highway Traffic Safety Administration (NHTSA) and Environmental Protection Agency (EPA) Corporate Average Fuel Economy (CAFE) and greenhouse gas (GHG) emission standards, this new report from the National Research Council is a technical evaluation of costs, benefits, and implementation issues of fuel reduction technologies for next-generation light-duty vehicles. Cost, Effectiveness, and Deployment of Fuel Economy Technologies for Light-Duty Vehicles estimates the cost, potential efficiency improvements, and barriers to commercial deployment of technologies that might be employed from 2020 to 2030. This report describes these promising technologies and makes recommendations for their inclusion on the list of technologies applicable for the 2017-2025 CAFE standards.

Download or read book Regenerative Hydraulic Variable Valve Actuator for Internal Combustion Engines written by Ahmad M. Sabri and published by . This book was released on 1999 with total page 486 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Tribological Processes in the Valve Train Systems with Lightweight Valves written by Krzysztof Jan Siczek and published by Butterworth-Heinemann. This book was released on 2016-06-17 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: Tribological Processes in Valvetrain Systems with Lightweight Valves: New Research and Modelling provides readers with the latest methodologies to reduce friction and wear in valvetrain systems—a severe problem for designers and manufacturers. The solution is achieved by identifying the tribological processes and phenomena in the friction nodes of lightweight valves made of titanium alloys and ceramics, both cam and camless driven. The book provides a set of structured information on the current tribological problems in modern internal combustion engines—from an introduction to the valvetrain operation to the processes that produce wear in the components of the valvetrain. A valuable resource for teachers and students of mechanical or automotive engineering, as well as automotive manufacturers, automotive designers, and tuning engineers. - Shows the tribological problems occurring in the guide-light valve-seat insert - Combines numerical and experimental solutions of wear and friction processes in valvetrain systems - Discusses various types of cam and camless drives the valves used in valve trains of internal combustion engines—both SI and CI - Examines the materials used, protective layers and geometric parameters of lightweight valves, as well as mating guides and seat inserts

Download or read book Green Technologies and the Mobility Industry written by Andrew Brown and published by SAE International. This book was released on 2010-11-16 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book features 20 SAE technical papers, originally published in 2009 and 2010, which showcase how the mobility industry is developing greener products and staying responsive - if not ahead of - new standards and legal requirements. These papers were selected by SAE International's 2010 President Dr. Andrew Brown Jr., Executive Director and Chief Technologist for Delphi Corporation. Authored by international experts from both industry and academia, they cover a wide range of cutting-edge subjects including powertrain electrification, alternative fuels, new emissions standards and remediation strategies, nanotechnology, sustainability, in-vehicle networking, and how various countries are also stepping up to the "green challenge". Green Technologies and the Mobility Industry also offers additional useful information: the most recent Delphi Worldwide Emissions Standards booklets, which will be shipped with the print version of this title, or as part of the PDF download, if you purchase the ebook version. Exclusive Multimedia Package Watch Dr. Andrew Brown, Jr. describe the new trends in green mobility. Download a free SAE presentation on green technologies and the mobility industry. Challenging times: an interview with Dr. Andrew Brown, Jr. Buy the Set and Save! This book is the first in the trilogy from SAE on "Safe, Green and Connected" vehicles in the mobility industry edited by Dr. Andrew Brown, Jr. This trilogy can be purchased in a combination of the following sets: Green Technologies and Active Safety in the Mobility Industry Green Technologies and Connectivity in the Mobility Industry Active Safety and Connectivity in the Mobility Industry Buy the Entire 3 Volume Set to Save the Most! Green, Safe & Connected: The Future of Mobility

Download or read book New Generation of Engine written by Pierre Duret and published by Editions OPHRYS. This book was released on with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Recent Advances in Materials and Modern Manufacturing written by I. A. Palani and published by Springer Nature. This book was released on 2022-05-26 with total page 1129 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents the select proceedings of the fourth International Conference on Advanced Materials and Modern Manufacturing (ICAMMM 2021). It covers broad areas such as advanced mechanical engineering, material science and manufacturing process. Various topics discussed in this book include green manufacturing, green materials, Industry 4.0, additive manufacturing, precision engineering, sustainability, manufacturing operations management and so on. Given its contents, the book will be useful for students, researchers, engineers and professionals working in the area of mechanical engineering and its allied fields.

Download or read book Official Gazette of the United States Patent and Trademark Office written by United States. Patent and Trademark Office and published by . This book was released on 2002 with total page 1370 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in IC Engines and Combustion Technology written by Ashwani K. Gupta and published by Springer Nature. This book was released on 2020-08-18 with total page 939 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises select peer-reviewed proceedings of the 26th National Conference on IC Engines and Combustion (NCICEC) 2019 which was organised by the Department of Mechanical Engineering, National Institute of Technology Kurukshetra under the aegis of The Combustion Institute-Indian Section (CIIS). The book covers latest research and developments in the areas of combustion and propulsion, exhaust emissions, gas turbines, hybrid vehicles, IC engines, and alternative fuels. The contents include theoretical and numerical tools applied to a wide range of combustion problems, and also discusses their applications. This book can be a good reference for engineers, educators and researchers working in the area of IC engines and combustion.

Download or read book Hcci and Cai Engines for the Automotive Industry written by H Zhao and published by Elsevier. This book was released on 2007-08-02 with total page 557 pages. Available in PDF, EPUB and Kindle. Book excerpt: Homogeneous charge compression ignition (HCCI)/controlled auto-ignition (CAI) has emerged as one of the most promising engine technologies with the potential to combine fuel efficiency and improved emissions performance, offering reduced nitrous oxides and particulate matter alongside efficiency comparable with modern diesel engines. Despite the considerable advantages, its operational range is rather limited and controlling the combustion (timing of ignition and rate of energy release) is still an area of on-going research. Commercial applications are, however, close to reality.HCCI and CAI engines for the automotive industry presents the state-of-the-art in research and development on an international basis, as a one-stop reference work. The background to the development of HCCI / CAI engine technology is described. Basic principles, the technologies and their potential applications, strengths and weaknesses, as well as likely future trends and sources of further information are reviewed in the areas of gasoline HCCI / CAI engines; diesel HCCI engines; HCCI / CAI engines with alternative fuels; and advanced modelling and experimental techniques. The book provides an invaluable source of information for scientific researchers, R&D engineers and managers in the automotive engineering industry worldwide. - Presents the state-of-the-art in research and development on an international basis - An invaluable source of information for scientific researchers, R&D engineers and managers in the automotive engineering industry worldwide - Looks at one of the most promising engine technologies around

Download or read book Design and Development of a Regenerative Hydraulic Variable Timing Engine Valve Actuator written by William E. Tourdot and published by . This book was released on 2002 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Progress in Combustion Diagnostics Science and Technology written by Paul Medwell and published by MDPI. This book was released on 2020-03-25 with total page 336 pages. Available in PDF, EPUB and Kindle. Book excerpt: The role that combustion plays in the world’s energy systems will continue to evolve with the changes in technological demands. For example, the challenges that we face today are more focused on the conservation of energy and addressing environmental concerns, which together necessitate cleaner and more efficient combustion processes using a range of fuel sources. This book includes contributions to highlight the recent progress in theory and experiments, development, and demonstration of technologies and systems involving combustion processes, for the production, storage, use, and conservation of energy.

Download or read book Engine Modeling and Control written by Rolf Isermann and published by Springer. This book was released on 2014-07-01 with total page 646 pages. Available in PDF, EPUB and Kindle. Book excerpt: The increasing demands for internal combustion engines with regard to fuel consumption, emissions and driveability lead to more actuators, sensors and complex control functions. A systematic implementation of the electronic control systems requires mathematical models from basic design through simulation to calibration. The book treats physically-based as well as models based experimentally on test benches for gasoline (spark ignition) and diesel (compression ignition) engines and uses them for the design of the different control functions. The main topics are: - Development steps for engine control - Stationary and dynamic experimental modeling - Physical models of intake, combustion, mechanical system, turbocharger, exhaust, cooling, lubrication, drive train - Engine control structures, hardware, software, actuators, sensors, fuel supply, injection system, camshaft - Engine control methods, static and dynamic feedforward and feedback control, calibration and optimization, HiL, RCP, control software development - Control of gasoline engines, control of air/fuel, ignition, knock, idle, coolant, adaptive control functions - Control of diesel engines, combustion models, air flow and exhaust recirculation control, combustion-pressure-based control (HCCI), optimization of feedforward and feedback control, smoke limitation and emission control This book is an introduction to electronic engine management with many practical examples, measurements and research results. It is aimed at advanced students of electrical, mechanical, mechatronic and control engineering and at practicing engineers in the field of combustion engine and automotive engineering.

Download or read book The Motor Car written by Giancarlo Genta and published by Springer Science & Business Media. This book was released on 2014-01-06 with total page 673 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is an introduction to automotive engineering, to give freshmen ideas about this technology. The text is subdivided in parts that cover all facets of the automobile, including legal and economic aspects related to industry and products, product configuration and fabrication processes, historic evolution and future developments. The first part describes how motor vehicles were invented and evolved into the present product in more than 100 years of development. The purpose is not only to supply an historical perspective, but also to introduce and discuss the many solutions that were applied (and could be applied again) to solve the same basic problems of vehicle engineering. This part also briefly describes the evolution of automotive technologies and market, including production and development processes. The second part deals with the description and function analysis of all car subsystems, such as: · vehicle body, · chassis, including wheels, suspensions, brakes and steering mechanisms, · diesel and gasoline engines, · electric motors, batteries, fuel cells, hybrid propulsion systems, · driveline, including manual and automatic gearboxes. This part addresses also many non-technical issues that influence vehicle design and production, such as social and economic impact of vehicles, market, regulations, particularly on pollution and safety. In spite of the difficulty in forecasting the paths that will be taken by automotive technology, the third part tries to open a window on the future. It is not meant to make predictions that are likely to be wrong, but to discuss the trends of automotive research and innovation and to see the possible paths that may be taken to solve the many problems that are at present open or we can expect for the future. The book is completed by two appendices about the contribution of computers in designing cars, particularly the car body and outlining fundamentals of vehicle mechanics, including aerodynamics, longitudinal (acceleration and braking) and transversal (path control) motion.

Download or read book Injection Technologies and Mixture Formation Strategies For Spark Ignition and Dual Fuel Engines written by Alessandro Ferrari and published by SAE International. This book was released on 2022-06-24 with total page 407 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel injection systems and performance is fundamental to combustion engine performance in terms of power, noise, efficiency, and exhaust emissions. There is a move toward electric vehicles (EVs) to reduce carbon emissions, but this is unlikely to be a rapid transition, in part due to EV batteries: their size, cost, longevity, and charging capabilities as well as the scarcity of materials to produce them. Until these isssues are resolved, refining the spark-ignited engine is necessary address both sustainability and demand for affordable and reliable mobility. Even under policies oriented to smart sustainable mobility, spark-ignited engines remain strategic, because they can be applied to hybridized EVs or can be fueled with gasoline blended with bioethanol or bio-butanol to drastically reduce particulate matter emissions of direct injection engines in addition to lower CO2 emissions. In this book, Alessandro Ferrari and Pietro Pizzo provide a full review of spark-ignited engine fuel injection systems. The most popular typologies of fuel injection systems are considered, with special focus on state-of-the-art solutions. Dedicated sections on the methods for air mass evaluation, fuel delivery low-pressure modules, and the specific subsystems for idle, cold start, and warm-up control are also included. The authors pay special attention to mixture formation strategies, as they are a fundamental theme for SI engines. An exhaustive overview of fuel injection technologies is provided, and mixture formation strategies for spark ignited combustion engines are considered. Fuel Injection Systems illustrates the performance of these systems and will also serve as a reference for engineers who are active in the aftermarket, offering detailed information on fuel injection system solutions that are mounted in older vehicles.

Download or read book Automobile Mechanical and Electrical Systems written by Tom Denton and published by Routledge. This book was released on 2011-05-23 with total page 522 pages. Available in PDF, EPUB and Kindle. Book excerpt: This textbook will help you learn all the skills you need to pass Level 3 and 4 Vehicle Maintenance and Repair courses from City and Guilds, IMI and BTEC, and is also ideal for higher level ASE, AUR and other qualifications. Advanced Automotive Fault Diagnosis covers the fundamentals of vehicle systems and components and explains the latest diagnostic techniques employed in effective vehicle maintenance and repair. Diagnostics, or fault finding, is an essential part of an automotive technician’s work, and as automotive systems become increasingly complex there is a greater need for good diagnostics skills. For students new to the subject, this book will help to develop these skills, but will also assist experienced technicians in further improving their performance and keeping up with recent industry developments. In full colour and including examples of the latest technology, this is the guide that no student enrolled on an automotive maintenance and repair course should be without.

Download or read book Solving the Powertrain Puzzle written by Schaeffler Technologies GmbH & Co. KG and published by Springer. This book was released on 2014-09-12 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: Every four years, Schaeffler provides an insight into its latest developments and technologies from the engine, transmission and chassis as well as hybridization and electric mobility sectors. In 2014 the Schaeffler Symposium with the motto “Solving the Powertrain Puzzle” took place from 3th to 4th of April in Baden-Baden. Mobility for tomorrow is the central theme of this proceeding. The authors are discussing the different requirements, which are placed on mobility in different regions of the world. In addition to the company's work in research and development, a comprehensive in-house mobility study also provides a reliable basis for the discussion. The authors are convinced that there will be a paradigm shift in the automotive industry. Issues such as increasing efficiency and advancing electrification of the powertrain, automatic and semi-automatic driving, as well as integration in information networks will define the automotive future. In addition, the variety of solutions available worldwide will become increasingly more complex and mobility patterns will also change rapidly. However, this does not mean that cars will drive virtually in the future. Powertrains based on internal combustion engines will still dominate for a very long time and demonstrate new strengths in combination with hybrid drives. Transmissions will also gain in importance as the link between the internal combustion engine and electric motor. The proceeding “Solving the Powertrain Puzzle” contains 34 technical papers from renowned experts and researchers in the field of automotive engineering.

Download or read book Engine Testing written by Anthony Martyr and published by Elsevier. This book was released on 2012-03-05 with total page 601 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book brings together the large and scattered body of information on the theory and practice of engine testing, to which any engineer responsible for work of this kind must have access. Engine testing is a fundamental part of development of new engine and powertrain systems, as well as of the modification of existing systems. It forms a significant part of the practical work of many automotive and mechanical engineers, in the auto manufacturing companies, their suppliers suppliers, specialist engineering services organisations, the motor sport sector, hybrid vehicles and tuning sector. The eclectic nature of engine, powertrain, chassis and whole vehicle testing makes this comprehensive book a true must-have reference for those in the automotive industry as well as more advanced students of automotive engineering. * The only book dedicated to engine testing; over 4000 copies sold of the second edition * Covers all key aspects of this large topic, including test-cell set up, data management, dynamometer selection and use, air, thermal, combustion, mechanical, and emissions assessment * Most automotive engineers are involved with many aspects covered by this book, making it a must-have reference