Download or read book Hydraulic Modeling and GIS written by Lori Armstrong and published by ESRI Press. This book was released on 2012 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: GIS and hydraulic modeling are complementary technologies. By integrating them with each other, water utility companies can reap substantial time and cost savings. A well-designed integration of the two systems provides ready access to mission-critical data. As a result, risk-of-failure analysis, repair and replacement, capacity assessment, capital improvement planning, and numerous other water utility applications run more efficiently and more effectively. Hydraulic Modeling and GIS identifies the challenges that must be navigated and offers best practices for achieving an integration that will be sustainable over the long term.
Download or read book Hydrologic and Hydraulic Modeling Support written by David R. Maidment and published by ESRI, Inc.. This book was released on 2000 with total page 232 pages. Available in PDF, EPUB and Kindle. Book excerpt: Digital elevation model issues in water resources modeling - Preparation of DEMs for use in environmental modeling analysis - Source water protection project : a comparison of watershed delineation methods in ARC/INFO and arcView GIS - DEM preprocessing for efficient watershed delineation - Gis tools for HMS modeling support - Hydrologic model of the buffalo bayou using GIS - Development of digital terrain representation for use in river modeling - HEC-GeoRAS : linking GIS to hydraulic analysis using ARC/INFO and HEC-RAS - Floodplain determination using arcView GIS and HEC-RAS - The accuracy and efficiency of GIS-Based floodplain determinations.
Download or read book Distributed Hydrologic Modeling Using GIS written by Baxter E. Vieux and published by Springer Science & Business Media. This book was released on 2004-10-29 with total page 305 pages. Available in PDF, EPUB and Kindle. Book excerpt: 1. 5 REFERENCES 127 7 DIGITAL TERRAIN 129 1. 1 INTRODUCTION 129 1. 2 DRAINAGE NETWORK 130 1. 3 DEFINITION OF CHANNEL NETWORKS 135 1. 4 RESOLUTION DEPENDENT EFFECTS 138 1. 5 CONSTRAINING DRAINAGE DIRECTION 141 1. 6 SUMMARY 145 1. 7 REFERENCES 146 8 PRECIPITATION MEASUREMENT 149 1. 1 INTRODUCTION 149 1. 2 RAIN GAUGE ESTIMATION OF RAINFALL 151 ADAR STIMATION OF RECIPITATION 1. 3 R E P 155 1. 4 WSR-88D RADAR CHARACTERISTICS 167 1. 5 INPUT FOR HYDROLOGIC MODELING 172 1. 6 SUMMARY 174 1. 7 REFERENCES 175 9 FINITE ELEMENT MODELING 177 1. 1 INTRODUCTION 177 1. 2 MATHEMATICAL FORMULATION 182 1. 3 SUMMARY 194 1. 4 REFERENCES 195 10 DISTRIBUTED MODEL CALIBRATION 197 1. 1 INTRODUCTION 197 1. 2 CALIBRATION APPROACH 199 1. 3 DISTRIBUTED MODEL CALIBRATION 201 1. 4 AUTOMATIC CALIBRATION 208 1. 5 SUMMARY 214 1. 6 REFERENCES 214 11 DISTRIBUTED HYDROLOGIC MODELING 217 1. 1 INTRODUCTION 218 1. 2 CASE STUDIES 218 1. 3 SUMMARY 236 1. 4 REFERENCES 237 12 HYDROLOGIC ANALYSIS AND PREDICTION 239 1. 1 INTRODUCTION 239 x Distributed Hydrologic Modeling Using GIS 1. 2 VFLOTM EDITIONS 241 1. 3 VFLOTM FEATURES AND MODULES 242 1. 4 MODEL FEATURE SUMMARY 245 1. 5 VFLOTM REAL-TIME 256 1. 6 DATA REQUIREMENTS 258 1. 7 RELATIONSHIP TO OTHER MODELS 259 1. 8 SUMMARY 260 1.
Download or read book Arc Hydro written by David R. Maidment and published by ESRI, Inc.. This book was released on 2002 with total page 222 pages. Available in PDF, EPUB and Kindle. Book excerpt: Why Arc hydro? / David Maidment / - Arc Hydro framwork / David Maidment, Scott Morehouse / - Hydro networks / Francisco Olivera, David Maidment / - Drainage systems / Francisco Olivera, Jordan Furnans / River channels / Nawajish Noma, James Nelson / Hydrography / Kim Davis, Jordan Furnans / - Time series / Damid Maidment, Venkatesh Merwade / - Hydrologic modeling / Steve Grise, David Arctur.
Download or read book Spatial Modeling in GIS and R for Earth and Environmental Sciences written by Hamid Reza Pourghasemi and published by Elsevier. This book was released on 2019-01-18 with total page 800 pages. Available in PDF, EPUB and Kindle. Book excerpt: Spatial Modeling in GIS and R for Earth and Environmental Sciences offers an integrated approach to spatial modelling using both GIS and R. Given the importance of Geographical Information Systems and geostatistics across a variety of applications in Earth and Environmental Science, a clear link between GIS and open source software is essential for the study of spatial objects or phenomena that occur in the real world and facilitate problem-solving. Organized into clear sections on applications and using case studies, the book helps researchers to more quickly understand GIS data and formulate more complex conclusions. The book is the first reference to provide methods and applications for combining the use of R and GIS in modeling spatial processes. It is an essential tool for students and researchers in earth and environmental science, especially those looking to better utilize GIS and spatial modeling. - Offers a clear, interdisciplinary guide to serve researchers in a variety of fields, including hazards, land surveying, remote sensing, cartography, geophysics, geology, natural resources, environment and geography - Provides an overview, methods and case studies for each application - Expresses concepts and methods at an appropriate level for both students and new users to learn by example
Download or read book GIS Applications for Water Wastewater and Stormwater Systems written by U.M. Shamsi and published by CRC Press. This book was released on 2005-01-27 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Professionals involved in the planning, design, operation, and construction of water, wastewater, and stormwater systems need to understand the productivity-enhancing applications of GIS. Inspired by an ASCE-sponsored continuing education course taught by the author, GIS Applications for Water, Wastewater, and Stormwater Systems focuses on t
Download or read book Geospatial Challenges in the 21st Century written by Kostis Koutsopoulos and published by Springer. This book was released on 2019-01-16 with total page 422 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on 21st century geospatial technologies (GT). It highlights their broad range of capabilities and their essential role in effectively addressing and resolving critical everyday issues, such as environment, sustainability, climate change, urban planning, economy, culture and geopolitics. Featuring chapters written by leading international scientists, it discusses the application of GT tools and demonstrates that the problems requiring such tools transcend national boundaries, cultures, political systems and scientific backgrounds on a global scale. In addition, it enhances readers’ spatial understanding of, and geographical reasoning in connection with, societal issues. The book will appeal to scientists, teachers and students of geography, the earth sciences and related areas, as well as decision-makers interested in the application and capabilities of geospatial technologies and new, spatial methods for addressing important issues.
Download or read book Hydrologic Modeling written by Vijay P Singh and published by Springer. This book was released on 2018-01-19 with total page 718 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains seven parts. The first part deals with some aspects of rainfall analysis, including rainfall probability distribution, local rainfall interception, and analysis for reservoir release. Part 2 is on evapotranspiration and discusses development of neural network models, errors, and sensitivity. Part 3 focuses on various aspects of urban runoff, including hydrologic impacts, storm water management, and drainage systems. Part 4 deals with soil erosion and sediment, covering mineralogical composition, geostatistical analysis, land use impacts, and land use mapping. Part 5 treats remote sensing and geographic information system (GIS) applications to different hydrologic problems. Watershed runoff and floods are discussed in Part 6, encompassing hydraulic, experimental, and theoretical aspects. Water modeling constitutes the concluding Part 7. Soil and Water Assessment Tool (SWAT), Xinanjiang, and Soil Conservation Service-Curve Number (SCS-CN) models are discussed. The book is of interest to researchers and practitioners in the field of water resources, hydrology, environmental resources, agricultural engineering, watershed management, earth sciences, as well as those engaged in natural resources planning and management. Graduate students and those wishing to conduct further research in water and environment and their development and management find the book to be of value.
Download or read book Mapping and Modeling Weather and Climate with GIS written by Lori Armstrong and published by ESRI Press. This book was released on 2015 with total page 319 pages. Available in PDF, EPUB and Kindle. Book excerpt: Latest research by more than three dozen atmospheric science experts on GIS and weather and climate studies.
Download or read book Distributed Hydrological Modelling written by Michael B. Abbott and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 323 pages. Available in PDF, EPUB and Kindle. Book excerpt: It is the task of the engineer, as of any other professional person, to do everything that is reasonably possible to analyse the difficulties with which his or her client is confronted, and on this basis to design solutions and implement these in practice. The distributed hydrological model is, correspondingly, the means for doing everything that is reasonably possible - of mobilising as much data and testing it with as much knowledge as is economically feasible - for the purpose of analysing problems and of designing and implementing remedial measures in the case of difficulties arising within the hydrological cycle. Thus the aim of distributed hydrologic modelling is to make the fullest use of cartographic data, of geological data, of satellite data, of stream discharge measurements, of borehole data, of observations of crops and other vegetation, of historical records of floods and droughts, and indeed of everything else that has ever been recorded or remembered, and then to apply to this everything that is known about meteorology, plant physiology, soil physics, hydrogeology, sediment transport and everything else that is relevant within this context. Of course, no matter how much data we have and no matter how much we know, it will never be enough to treat some problems and some situations, but still we can aim in this way to do the best that we possibly can.
Download or read book Advanced Water Distribution Modeling and Management written by Thomas M. Walski and published by . This book was released on 2003 with total page 812 pages. Available in PDF, EPUB and Kindle. Book excerpt: Accompanying CD-ROM includes: a 25-pipe academic version of WaterCAD with stand-alone interface; the WaterCAD files for individual problems; the WaterCAD user manual and an examination booklet for continuing education credits; Adobe Acrobat Reader software for viewing the manual and booklet.
Download or read book Urban Drainage written by J. B. Ellis and published by IWA Publishing. This book was released on 2004-03-15 with total page 528 pages. Available in PDF, EPUB and Kindle. Book excerpt: Urban Drainage: A Multilingual Glossary has been written by research engineers and scientists with substantial experience in the urban drainage field. It provides definitive descriptions of urban drainage terms in English, French, Japanese and German, giving guidance on their appropriate usage and context. The glossary also contains many diagrams, tables and technical discussions, and is a very practical tool to facilitate international technical communication in the urban drainage field. Containing well over 850 commonly-used terms in urban drainage, all expressed in a user-friendly manner, the book serves as a valuable resource for both practitioner and academic. Topics covered include: urban hydrology/hydraulics sewerage surface water runoff pollution (groundwater and surface) receiving waters ecology ecotoxicology best management practices urban water resource management Urban Drainage: A Multilingual Glossary represents an initiative of the joint IWA/IAHR Committee on Urban Drainage and has arisen out of the long-standing terminological and tautological difficulties of many terms in common usage within international urban drainage practice. It will be of great use and interest to scientists, engineers and ecologists, professionals and students working in urban hydrology/hydraulics, urban water resource management and regulation, urban planning and ecology.
Download or read book Losses in Water Distribution Networks written by M. Farley and published by IWA Publishing. This book was released on 2003-03-31 with total page 297 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is a best practice manual for addressing water losses in water distribution networks worldwide. Systems and methodologies are presented for improving water loss and leakage management in a range of networks, from systems with a well-developed infrastructure to those in developing countries where the network may need to be upgraded. The key feature of the manual is a diagnostic approach to develop a water loss strategy - using the appropriate tools to find the right solutions - which can be applied to any network. The methods of assessing the scale and volume of water loss are outlined, together with the procedures for setting up leakage monitoring and detection systems. As well as real losses (leakage) procedures for addressing apparent losses, by introducing regulatory and customer metering policies are explained. Suggestions are made for demand management and water conservation programmes, to complement the water loss strategy. Recommendations are made for training workshops and operation and maintenance programmes to ensure skills transfer and sustainability. The manual is illustrated throughout with case studies. Losses in Water Distribution Networks will appeal to a wide range of practitioners responsible for designing and managing a water loss strategy. These include consultants, operations managers, engineers, technicians and operational staff. It will also be a valuable reference for senior managers and decision makers, who may require an overview of the principles and procedures for controlling losses. The book will also be suitable as a source document for courses in Water Engineering, Resource Management and Environmental Management.
Download or read book GIS Tools for Water Wastewater and Stormwater Systems written by Uzair M. Shamsi and published by Amer Society of Civil Engineers. This book was released on 2002 with total page 375 pages. Available in PDF, EPUB and Kindle. Book excerpt: Uzair Shamsi presents a step-by-step approach covering GIS application case studies, examples, and costs associated with hardware, software, data conversion, and implementation.
Download or read book GIS and Geocomputation for Water Resource Science and Engineering written by Barnali Dixon and published by John Wiley & Sons. This book was released on 2016-02-08 with total page 579 pages. Available in PDF, EPUB and Kindle. Book excerpt: GIS and Geocomputation for Water Resource Science and Engineering not only provides a comprehensive introduction to the fundamentals of geographic information systems but also demonstrates how GIS and mathematical models can be integrated to develop spatial decision support systems to support water resources planning, management and engineering. The book uses a hands-on active learning approach to introduce fundamental concepts and numerous case-studies are provided to reinforce learning and demonstrate practical aspects. The benefits and challenges of using GIS in environmental and water resources fields are clearly tackled in this book, demonstrating how these technologies can be used to harness increasingly available digital data to develop spatially-oriented sustainable solutions. In addition to providing a strong grounding on fundamentals, the book also demonstrates how GIS can be combined with traditional physics-based and statistical models as well as information-theoretic tools like neural networks and fuzzy set theory.
Download or read book Wastewater Collection System Modeling and Design written by Haestad Methods, Inc and published by . This book was released on 2004 with total page 648 pages. Available in PDF, EPUB and Kindle. Book excerpt: Disc 1 contains an academic version of SewerCAD stand-alone software, featuring exam booklet for continuing eduction credits, and user manual.
Download or read book Geographic Information Systems in Water Resources Engineering written by Lynn E. Johnson and published by CRC Press. This book was released on 2016-04-19 with total page 316 pages. Available in PDF, EPUB and Kindle. Book excerpt: State-of-the-art GIS spatial data management and analysis tools are revolutionizing the field of water resource engineering. Familiarity with these technologies is now a prerequisite for success in engineers' and planners' efforts to create a reliable infrastructure.GIS in Water Resource Engineering presents a review of the concepts and application
