Download or read book Hydraulic Institute Guideline for Rotodynamic centrifugal and Vertical Pump Efficiency Prediction written by Hydraulic Institute (U.S.) and published by . This book was released on 2009 with total page 16 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Hydraulic Institute Guideline for Rotodynamic Pump Efficiency Prediction written by Hydraulic Institute and published by . This book was released on 2015 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Variable Speed Pumping written by Europump & the Hydraulic Europump & the Hydraulic Insti and published by Elsevier. This book was released on 2004-06-10 with total page 185 pages. Available in PDF, EPUB and Kindle. Book excerpt: Prepared by industry experts from the pump, motor and drive industries under the auspices of Europump and the Hydraulic Institute, this reference book provides a comprehensive guide to variable speed pumping.It includes technical descriptions of pumping systems and their components, and guides the reader through the evaluation of different speed control options.Case studies help illustrate the life cycle cost savings and process improvements that appropriate variable speed pumping can deliver.·Authoritative, global reference to Variable Speed Pumping, by Europump and the Hydraulic Institute·Combines the technical knowledge of pump, motor and control systems in one guide·Brings together all the concepts, metrics and step-by-step decision-making support you need to help you decide which VSD strategies are most appropriate·Will help you design and specify pumping applications that minimise life-cycle costs
Download or read book Hydrodynamics of Pumps written by Christopher E. Brennen and published by Cambridge University Press. This book was released on 2011-03-28 with total page 287 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrodynamics of Pumps is a reference for pump experts and a textbook for advanced students. It examines the fluid dynamics of liquid turbomachines, particularly pumps, focusing on special problems and design issues associated with the flow of liquid through a rotating machine. There are two characteristics of a liquid that lead to problems and cause a significantly different set of concerns than those in gas turbines. These are the potential for cavitation and the high density of liquids, which enhances the possibility of damaging, unsteady flows and forces. The book begins with an introduction to the subject, including cavitation, unsteady flows and turbomachinery, basic pump design and performance principles. Chapter topics include flow features, cavitation parameters and inception, bubble dynamics, cavitation effects on pump performance, and unsteady flows and vibration in pumps - discussed in the three final chapters. The book is richly illustrated and includes many practical examples.
Download or read book Rotodynamic Pumps Centrifugal and Axial written by K. M. Srinivasan and published by New Age International. This book was released on 2008 with total page 15 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Centrifugal Pumps written by Val S. Lobanoff and published by Elsevier. This book was released on 2013-10-22 with total page 592 pages. Available in PDF, EPUB and Kindle. Book excerpt: Centrifugal Pumps: Design and Application, Second Edition focuses on the design of chemical pumps, composite materials, manufacturing techniques employed in nonmetallic pump applications, mechanical seals, and hydraulic design. The publication first offers information on the elements of pump design, specific speed and modeling laws, and impeller design. Discussions focus on shape of head capacity curve, pump speed, viscosity, specific gravity, correction for impeller trim, model law, and design suggestions. The book then takes a look at general pump design, volute design, and design of multi-stage casing. The manuscript examines double-suction pumps and side-suction design, net positive suction head, and vertical pumps. Topics include configurations, design features, pump vibration, effect of viscosity, suction piping, high speed pumps, and side suction and suction nozzle layout. The publication also ponders on high speed pumps, double-case pumps, hydraulic power recovery turbines, and shaft design and axial thrust. The book is a valuable source of data for pump designers, students, and rotating equipment engineers.
Download or read book Rotodynamic Pumps Guideline for Condition Monitoring written by Hydraulic Institute and published by . This book was released on 2016 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Handbook of Pumps and Pumping written by Brian Nesbitt and published by Elsevier. This book was released on 2006-10-18 with total page 499 pages. Available in PDF, EPUB and Kindle. Book excerpt: Written by an experienced engineer, this book contains practical information on all aspects of pumps including classifications, materials, seals, installation, commissioning and maintenance. In addition you will find essential information on units, manufacturers and suppliers worldwide, providing a unique reference for your desk, R&D lab, maintenance shop or library.* Includes maintenance techniques, helping you get the optimal performance out of your pump and reducing maintenance costs * Will help you to understand seals, couplings and ancillary equipment, ensuring systems are set up properly to save time and money * Provides useful contacts for manufacturers and suppliers who specialise in pumps, pumping and ancillary equipment
Download or read book Centrifugal Pumps written by Johann Friedrich Gülich and published by Springer. This book was released on 2014-10-24 with total page 1146 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book gives an unparalleled, up-to-date, in-depth treatment of all kinds of flow phenomena encountered in centrifugal pumps including the complex interactions of fluid flow with vibrations and wear of materials. The scope includes all aspects of hydraulic design, 3D-flow phenomena and partload operation, cavitation, numerical flow calculations, hydraulic forces, pressure pulsations, noise, pump vibrations (notably bearing housing vibration diagnostics and remedies), pipe vibrations, pump characteristics and pump operation, design of intake structures, the effects of highly viscous flows, pumping of gas-liquid mixtures, hydraulic transport of solids, fatigue damage to impellers or diffusers, material selection under the aspects of fatigue, corrosion, erosion-corrosion or hydro-abrasive wear, pump selection, and hydraulic quality criteria. As a novelty, the 3rd ed. brings a fully analytical design method for radial impellers, which eliminates the arbitrary choices inherent to former design procedures. The discussions of vibrations, noise, unsteady flow phenomena, stability, hydraulic excitation forces and cavitation have been significantly enhanced. To ease the use of the information, the methods and procedures for the various calculations and failure diagnostics discussed in the text are gathered in about 150 pages of tables which may be considered as almost unique in the open literature. The text focuses on practical application in the industry and is free of mathematical or theoretical ballast. In order to find viable solutions in practice, the physical mechanisms involved should be thoroughly understood. The book is focused on fostering this understanding which will benefit the pump engineer in industry as well as academia and students.
Download or read book Predictive Maintenance of Pumps Using Condition Monitoring written by Raymond S Beebe and published by Elsevier. This book was released on 2004-04-16 with total page 193 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book shows how condition monitoring can be applied to detect internal degradation in pumps so that appropriate maintenance can be decided upon based on actual condition rather than arbitrary time scales. The book focuses on the main condition monitoring techniques particularly relevant to pumps (vibration analysis, performance analysis). The philosophy of condition monitoring is briefly summarised and field examples show how condition monitoring is applied to detect internal degration in pumps.* The first book devoted to condition monitoring and predictive maintenance in pumps. * Explains how to minimise energy costs, limit overhauls and reduce maintenance expenditure.* Includes material not found anywhere else.
Download or read book Pump User s Handbook written by Heinz P. Bloch and published by The Fairmont Press, Inc.. This book was released on 2004 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Simply put, this book explains what exactly needs to be done if a facility wants to progress from being a one, two or three year pump MTBF plant, and wishes to join the leading money-making facilities that today achieve a demonstrated pump MTBF of 8.6 years.
Download or read book Rotodynamic Pumps Guideline for Condition Monitoring written by Hydraulic Institute and published by . This book was released on 2022 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Pumping Station Design written by Robert L. Sanks and published by Butterworth-Heinemann. This book was released on 1998 with total page 1032 pages. Available in PDF, EPUB and Kindle. Book excerpt: Pumping Station Design, Second Edition shows how to apply the fundamentals of various disciplines and subjects to produce a well-integrated pumping station that will be reliable, easy to operate and maintain, and free from design mistakes. In a field where inappropriate design can be extremely costly for any of the foregoing reasons, there is simply no excuse for not taking expert advice from this book. The content of this second edition has been thoroughly reviewed and approved by many qualified experts. The depth of experience and expertise of each contributor makes the second edition of Pumping Station Design an essential addition to the bookshelves of anyone in the field.
Download or read book Principles of Turbomachinery written by R. K. Turton and published by Springer Science & Business Media. This book was released on 2012-12-06 with total page 213 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text outlines the fluid and thermodynamic principles that apply to all classes of turbomachines, and the material has been presented in a unified way. The approach has been used with successive groups of final year mechanical engineering students, who have helped with the development of the ideas outlined. As with these students, the reader is assumed to have a basic understanding of fluid mechanics and thermodynamics. However, the early chapters combine the relevant material with some new concepts, and provide basic reading references. Two related objectives have defined the scope of the treatment. The first is to provide a general treatment of the common forms of turbo machine, covering basic fluid dynamics and thermodynamics of flow through passages and over surfaces, with a brief derivation of the fundamental governing equations. The second objective is to apply this material to the various machines in enough detail to allow the major design and performance factors to be appreciated. Both objectives have been met by grouping the machines by flow path rather than by application, thus allowing an appreciation of points of similarity or difference in approach. No attempt has been made to cover detailed points of design or stressing, though the cited references and the body of information from which they have been taken give this sort of information. The first four chapters introduce the fundamental relations, and the suc ceeding chapters deal with applications to the various flow paths.
Download or read book Pump Intake Design written by Hydraulic Institute (Parsippany, N.J.) and published by . This book was released on 1998 with total page 192 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Wind Energy written by Mathew Sathyajith and published by Springer Science & Business Media. This book was released on 2006-03-14 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Growing energy demand and environmental consciousness have re-evoked human interest in wind energy. As a result, wind is the fastest growing energy source in the world today. Policy frame works and action plans have already been for- lated at various corners for meeting at least 20 per cent of the global energy - mand with new-renewables by 2010, among which wind is going to be the major player. In view of the rapid growth of wind industry, Universities, all around the world, have given due emphasis to wind energy technology in their undergraduate and graduate curriculum. These academic programmes attract students from diver- fied backgrounds, ranging from social science to engineering and technology. Fundamentals of wind energy conversion, which is discussed in the preliminary chapters of this book, have these students as the target group. Advanced resource analysis tools derived and applied are beneficial to academics and researchers working in this area. The Wind Energy Resource Analysis (WERA) software, provided with the book, is an effective tool for wind energy practitioners for - sessing the energy potential and simulating turbine performance at prospective sites.
Download or read book Rotodynamic Pumps Guideline for NPSH Margin written by Hydraulic Institute and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
