Download or read book Hydraulic Fracturing Chemicals and Fluids Technology written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2020-04-28 with total page 354 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum engineers continue to need cost saving and environmentally sustainable products and methods for today’s hydraulic fracturing operations. Hydraulic Fracturing Chemicals and Fluid Technology, Second Edition, continues to deliver an easy-to-use manual of fluid formulations to meet specific job needs. Enhanced with more environmental aspects, this reference helps engineers and fluid specialists select and use the appropriate chemicals for any hydraulic fracturing job. New information concerning nanotechnology applications such as wellbore sealant and proppants are added to enhance operations in a sustainable manner while saving on production costs. Other updates include low recovery of fracturing water in shale, surfactants for waterless hydraulic fracturing, and expanded produced water treatment. Rounding out with updated references and patents for easy reference, Hydraulic Fracturing Chemicals and Fluid Technology, Second Edition, gives engineers a critical guide on selecting better products to boost productions while strengthening environmental enhancement and consideration. Gain insight with new information surrounding environmental contamination and produced water treatment methods Save on production costs with new nanoparticle-enhanced fluids and applications Eliminate guesswork with systematic approach to fluid technology organized by project need

Download or read book Hydraulic Fracturing Chemicals and Fluids Technology written by Narendra Parihar and published by . This book was released on 2015-08 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing Chemicals and Fluids Technology provides an easy-to-use manual to create fluid formulations that will meet project-specific needs while protecting the environment and the life of the well. Fink creates a concise and comprehensive reference that enables the engineer to logically select and use the appropriate chemicals on any hydraulic fracturing job. The book devoted entirely to hydraulic fracturing chemicals, Fink eliminates the guesswork so the engineer can select the best chemicals needed on the job while providing the best protection for the well, workers and environment. When classifying fracturing fluids and their additives, it is important that production, operation, and completion engineers understand which chemical should be utilized in different well environments.

Download or read book Chemicals Used in Hydraulic Fracturing written by United States House of Representatives Committee on Energy and Commerce and published by . This book was released on 2012-07-03 with total page 32 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing has helped to expand natural gas production in the United States, unlocking large natural gas supplies in shale and other unconventional formations across the country. As a result of hydraulic fracturing and advances in horizontal drilling technology, natural gas production in 2010 reached the highest level in decades. According to new estimates by the Energy Information Administration (EIA), the United States possesses natural gas resources sufficient to supply the United States for approximately 110 years. As the use of hydraulic fracturing has grown, so have concerns about its environmental and public health impacts. One concern is that hydraulic fracturing fluids used to fracture rock formations contain numerous chemicals that could harm human health and the environment, especially if they enter drinking water supplies. The opposition of many oil and gas companies to public disclosure of the chemicals they use has compounded this concern.

Download or read book Water Based Chemicals and Technology for Drilling Completion and Workover Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2015-02-06 with total page 289 pages. Available in PDF, EPUB and Kindle. Book excerpt: Oil and gas engineers today use three main factors in deciding drilling fluids: cost, performance, and environmental impact, making water-based products a much more attractive option. Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids effectively delivers all the background and infrastructure needed for an oil and gas engineer to utilize more water-based products that benefit the whole spectrum of the well’s life cycle. Helping to mitigate critical well issues such as formation damage, fluid loss control, and borehole repair, more operators demand to know the full selection of water-based products available to consistently keep a peak well performance. This must-have training guide provides the necessary coverage in the area, broken down by type and use, along with an extensive list of supportive materials such as a chemical index of structural formulas and helpful list of references for further reading. In addition to understanding the types, special additives, and chemical compatibilities of the products available, the reader will also learn proper waste disposal techniques, including management of produced water, a component mandatory to hydraulic fracturing operations. Concise and comprehensive, Water-Based Chemicals and Technology for Drilling, Completion, and Workover Fluids details all the necessary educational content and handy references to elevate your well’s performance while lowering your environmental impact. Understand the basics and functions on all water-based fluids for drilling, completion, cementing, and enhanced oil recovery operations Get up to date with the growing need for water-based fluids in hydraulic fracturing operations including supportive materials such as an index of trade names, acronyms, and chemicals Stay responsible and know the environmental aspects and current regulations, including disposal and discharge

Download or read book Review of Hydraulic Fracturing Technology and Practices written by United States. Congress. House. Committee on Science, Space, and Technology (2011) and published by . This book was released on 2011 with total page 160 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Petroleum Engineer s Guide to Oil Field Chemicals and Fluids written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2011-05-13 with total page 809 pages. Available in PDF, EPUB and Kindle. Book excerpt: Petroleum Engineer's Guide to Oil Field Chemicals and Fluids is a comprehensive manual that provides end users with information about oil field chemicals, such as drilling muds, corrosion and scale inhibitors, gelling agents and bacterial control. This book is an extension and update of Oil Field Chemicals published in 2003, and it presents a compilation of materials from literature and patents, arranged according to applications and the way a typical job is practiced. The text is composed of 23 chapters that cover oil field chemicals arranged according to their use. Each chapter follows a uniform template, starting with a brief overview of the chemical followed by reviews, monomers, polymerization, and fabrication. The different aspects of application, including safety and environmental impacts, for each chemical are also discussed throughout the chapters. The text also includes handy indices for trade names, acronyms and chemicals. Petroleum, production, drilling, completion, and operations engineers and managers will find this book invaluable for project management and production. Non-experts and students in petroleum engineering will also find this reference useful. Chemicals are ordered by use including drilling muds, corrosion inhibitors, and bacteria control Includes cutting edge chemicals and polymers such as water soluble polymers and viscosity control Handy index of chemical substances as well as a general chemical index

Download or read book Hydraulic Fracturing Chemicals and Fluids Technology written by Johannes Fink and published by Gulf Professional Publishing. This book was released on 2013-08-14 with total page 249 pages. Available in PDF, EPUB and Kindle. Book excerpt: When classifying fracturing fluids and their additives, it is important that production, operation, and completion engineers understand which chemical should be utilized in different well environments. A user's guide to the many chemicals and chemical additives used in hydraulic fracturing operations, Hydraulic Fracturing Chemicals and Fluids Technology provides an easy-to-use manual to create fluid formulations that will meet project-specific needs while protecting the environment and the life of the well. Fink creates a concise and comprehensive reference that enables the engineer to logically select and use the appropriate chemicals on any hydraulic fracturing job. The first book devoted entirely to hydraulic fracturing chemicals, Fink eliminates the guesswork so the engineer can select the best chemicals needed on the job while providing the best protection for the well, workers and environment. Pinpoints the specific compounds used in any given fracturing operation Provides a systematic approach to classifying fracturing fluid technology to meet specific project needs Eliminates guesswork with easy-to-understand language on selection and components of hydraulic fracturing chemicals Addresses environmental aspects of chemicals to safeguard employees and protect the environment

Download or read book Chemicals Used in Hydraulic Fracturing written by and published by . This book was released on 2011 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing (also known as "fracking" or "hydrofracking") has helped to expand natural gas production in the United States, unlocking large natural gas supplies in shale and other unconventional formations across the country. As a result of hydraulic fracturing and advances in horizontal drilling technology, natural gas production in 2010 reached the highest level in decades. According to new estimates by the Energy Information Administration (EIA), the United States possesses natural gas resources sufficient to supply the United States for approximately 110 years. As the use of hydraulic fracturing has grown, so have concerns about its environmental and public health impacts. One concern is that hydraulic fracturing fluids used to fracture rock formations contain numerous chemicals that could harm human health and the environment, especially if they enter drinking water supplies. The opposition of many oil and gas companies to public disclosure of the chemicals they use has compounded this concern. Last Congress, the Committee on Energy and Commerce launched an investigation to examine the practice of hydraulic fracturing in the United States. As part of that inquiry, the Committee asked the 14 leading oil and gas service companies to disclose the types and volumes of the hydraulic fracturing products they used in their fluids between 2005 and 2009 and the chemical contents of those products. This report summarizes the information provided to the Committee.

Download or read book Exploitation of Unconventional Oil and Gas Resources written by Kenneth Imo-Imo Israel Eshiet and published by . This book was released on 2019-07-10 with total page 152 pages. Available in PDF, EPUB and Kindle. Book excerpt: The stimulation of unconventional hydrocarbon reservoirs is proven to improve their productivity to an extent that has rendered them economically viable. Generally, the stimulation design is a complex process dependent on intertwining factors such as the history of the formation, rock and reservoir fluid type, lithology and structural layout of the formation, cost, time, etc. A holistic grasp of these can be daunting, especially for people without sufficient experience and/or expertise in the exploitation of unconventional hydrocarbon reserves. This book presents the key facets integral to producing unconventional resources, and how the different components, if pieced together, can be used to create an integrated stimulation design. Areas covered are as follows: • stimulation methods, • fracturing fluids, • mixing and behavior of reservoir fluids, • assessment of reservoir performance, • integration of surface drilling data, • estimation of geomechanical properties and hydrocarbon saturation, and • health and safety. Exploitation of Unconventional Oil and Gas Resources: Hydraulic Fracturing and Other Recovery and Assessment Techniques is an excellent introduction to the subject area of unconventional oil and gas reservoirs, but it also complements existing information in the same discipline. It is an essential text for higher education students and professionals in academia, research, and the industry.

Download or read book Environmental Considerations Associated with Hydraulic Fracturing Operations written by James A. Jacobs and published by John Wiley & Sons. This book was released on 2019-04-05 with total page 921 pages. Available in PDF, EPUB and Kindle. Book excerpt: A guide to environmental and communication issues related to fracking and the best approach to protect communities Environmental Considerations Associated with Hydraulic Fracturing Operations offers a much-needed resource that explores the complex challenges of fracking by providing an understanding of the environmental and communication issues that are inherent with hydraulic fracturing. The book balances the current scientific knowledge with the uncertainty and risks associated with hydraulic fracking. In addition, the authors offer targeted approaches for helping to keep communities safe. The authors include an overview of the historical development of hydraulic fracturing and the technology currently employed. The book also explores the risk, prevention, and mitigation factors that are associated with fracturing. The authors also include legal cases, regulatory issues, and data on the cost of recovery. The volume presents audit checklists for gathering critical information and documentation to support the reliability of the current environmental conditions related to fracking operations and the impact fracking can have on a community. This vital resource: Contains the technical information and mitigation recommendations for safety and environmental issues related to hydraulic fracturing Offers an historical overview of conventional and unconventional oil and gas drilling Explains the geologic and technical issues associated with fracking of tight sand and shale formulations Presents numerous case studies from the United States EPA and other agencies Discusses issues of co-produced waste water and induced seismicity from the injection of wastewater Written for environmental scientists, geologists, engineers, regulators, city planners, attorneys, foresters, wildlife biologists, and others, Environmental Considerations Associated with Hydraulic Fracturing Operations offers a comprehensive resource to the complex environmental and communication issues related to fracking.

Download or read book Environmental Impacts of Hydraulic Fracturing written by Frank R. Spellman and published by CRC Press. This book was released on 2012-09-17 with total page 465 pages. Available in PDF, EPUB and Kindle. Book excerpt: There is a strong need for innovation and the development of viable renewable energy sources. Recent technological advances now allow natural gas supplies—previously believed inaccessible or nonexistent—to be discovered, mined, and processed for both industrial and consumer use. The technology, a controversial process that is alternatively called hydraulic fracturing, fracking, fracing, or hydrofracking, has greatly expanded natural gas production in the United States. Presenting a balanced discussion, Environmental Impacts of Hydraulic Fracturing is a comprehensive guide to all aspects of hydraulic fracturing used to extract natural gas, along with gas exploration and production in various shale fields. As the use of hydraulic fracturing has grown, concerns about its environmental and public health impacts have also increased—one of the most significant concerns being the fluids that are injected into rock formations to cause the fracturing contain potentially hazardous chemical additives. The book covers all facets of the issue, including ongoing controversies about the environmental and operator safety issues arising from possible water pollution, drinking water contamination, on-the-job safety hazards, and harmful chemical exposure to workers and residents near well areas. The author discusses both the pros and cons of hydraulic fracturing, explaining the process in great detail. He describes the benefits of hydraulic fracturing and its importance in making the United States energy independent by drilling for its own resources, as well as the potential impacts to the surrounding environment. The text also includes suggestions and recommendations on how to mitigate environmental damage. Arguably the first book of its kind, this is the go-to text on the use and impacts of hydraulic fracturing.

Download or read book Handbook of Hydraulic Fracturing written by James G. Speight and published by John Wiley & Sons. This book was released on 2016-04-11 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: Presents an up-to-date description of current and new hydraulic fracturing processes Details Emerging Technologies such as Fracture Treatment Design, Open Hole Fracturing, Screenless Completions, Sand Control, Fracturing Completions and Productivity Covers Environmental Impact issues including Geological Disturbance; Chemicals used in Fracturing; General Chemicals; Toxic Chemicals; and Air, Water, Land, and Health impacts Provides many process diagrams as well as tables of feedstocks and their respective products

Download or read book Hydraulic Fracturing Explained written by Erle C. Donaldson and published by Elsevier. This book was released on 2014-02-25 with total page 225 pages. Available in PDF, EPUB and Kindle. Book excerpt: Rocks mechanics legend Erle Donaldson, along with colleagues Waqi Alam and Nasrin Begum from the oil and gas consultant company Tetrahedron, have authored this handbook on updated fundamentals and more recent technology used during a common hydraulic fracturing procedure. Meant for technical and non-technical professionals interested in the subject of hydraulic fracturing, the book provides a clear and simple explanation of the technology and related issues to promote the safe development of petroleum reserves leading to energy independence throughout the world.

Download or read book Hydraulic Fracturing and Shale Gas Production written by Spencer Ferguson and published by Nova Science Pub Incorporated. This book was released on 2012-12-20 with total page 153 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic fracturing is a technique used to free oil and natural gas trapped underground in low-permeability rock formations by injecting a fluid under high pressure in order to crack the formations. The composition of a fracturing fluid varies with the nature of the formation, but typically contains mostly water; a proppant to keep the fractures open, such as sand; and a small percentage of chemical additives. Some of these additives may be hazardous to health and the environment. The Shale Gas Production Subcommittee of the Secretary of Energy Advisory Board (SEAB) has recommended public disclosure, on a well-by-well basis, of all the chemical ingredients added to fracturing fluids, with some protection for trade secrets. This book provides an overview of current and proposed laws and regulations at the state and federal levels that require the disclosure of the chemicals added to the fluid used in hydraulic fracturing.

Download or read book Hydraulic Fracturing Impacts and Technologies written by Venki Uddameri and published by CRC Press. This book was released on 2015-06-22 with total page 310 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydraulic Fracturing Impacts and Technologies: A Multidisciplinary Perspective serves as an introduction to hydraulic fracturing and provides balanced coverage of its benefits and potential negative effects. Presenting a holistic assessment of hydraulic fracturing and its environmental impacts, this book chronicles the history and development of un

Download or read book The Fracking Debate written by Daniel Raimi and published by Columbia University Press. This book was released on 2017-12-26 with total page 255 pages. Available in PDF, EPUB and Kindle. Book excerpt: Over roughly the past decade, oil and gas production in the United States has surged dramatically—thanks largely to technological advances such as high-volume hydraulic fracturing, more commonly known as “fracking.” This rapid increase has generated widespread debate, with proponents touting economic and energy-security benefits and opponents highlighting the environmental and social risks of increased oil and gas production. Despite the heated debate, neither side has a monopoly on the facts. In this book, Daniel Raimi gives a balanced and accessible view of oil and gas development, clearly and thoroughly explaining the key issues surrounding the shale revolution. The Fracking Debate directly addresses the most common questions and concerns associated with fracking: What is fracking? Does fracking pollute the water supply? Will fracking make the United States energy independent? Does fracking cause earthquakes? How is fracking regulated? Is fracking good for the economy? Coupling a deep understanding of the scholarly research with lessons from his travels to every major U.S. oil- and gas-producing region, Raimi highlights stories of the people and communities affected by the shale revolution, for better and for worse. The Fracking Debate provides the evidence and context that have so frequently been missing from the national discussion of the future of oil and gas production, offering readers the tools to make sense of this critical issue.

Download or read book Hydraulic Fracturing HF written by Brandon J. Murrill and published by . This book was released on 2012-04-12 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: HF is a technique used to free oil and natural gas trapped underground in low-permeability rock formations by injecting a fluid under high pressure in order to cause cracks in the formations. The composition of a fracking contains water; a proppant to keep fractures open, such as sand; and a small amount of chemical additives, some of which may be hazardous to health and the environ. Public disclosure is recommended, on a well-by-basis, of all of the chemical ingred. added to fracking fluids, with some protection for trade secrets. This report provides an overview of current and proposed laws at the state and fed. levels that require the disclosure of the chemicals added to the fluid used in HF. This is a print on demand report.