Download or read book Combustion Chemistry and the Carbon Neutral Future written by Kenneth Brezinsky and published by Elsevier. This book was released on 2023-02-16 with total page 666 pages. Available in PDF, EPUB and Kindle. Book excerpt: As the demands for cleaner, more efficient, reduced and zero carbon emitting transportation increase, the traditional focus of Combustion Chemistry research is stretching and adapting to help provide solutions to these contemporary issues. Combustion Chemistry and the Carbon Neutral Future: What will the Next 25 Years of Research Require? presents a guide to current research in the field and an exploration of possible future steps as we move towards cleaner, greener and reduced carbon combustion chemistry. Beginning with a discussion of engine emissions and soot, the book goes on to discuss a range of alternative fuels, including hydrogen, ammonia, small alcohols and other bio-oxygenates, natural gas, syngas and synthesized hydrocarbon fuels. Methods for predicting and improving efficiency and sustainability, such as low temperature and catalytic combustion, chemical looping, supercritical fluid combustion, and diagnostic monitoring even at high pressure, are then explored. Some novel aspects of biomass derived aviation fuels and combustion synthesis are also covered. Combining the knowledge and experience of an interdisciplinary team of experts in the field, Combustion Chemistry and the Carbon Neutral Future: What will the Next 25 Years of Research Require? is an insightful guide to current and future focus areas for combustion chemistry researchers in line with the transition to greener, cleaner technologies. - Provides insight on current developments in combustion chemistry as a tool for supporting a reduced-carbon future - Reviews modeling and diagnostic tools, in addition to key approaches and alternative fuels - Includes projections for the future from leaders in the field, pointing current and prospective researchers to potentially fruitful areas for exploration

Download or read book Machine Learning and Its Application to Reacting Flows written by Nedunchezhian Swaminathan and published by Springer Nature. This book was released on 2023-01-01 with total page 353 pages. Available in PDF, EPUB and Kindle. Book excerpt: This open access book introduces and explains machine learning (ML) algorithms and techniques developed for statistical inferences on a complex process or system and their applications to simulations of chemically reacting turbulent flows. These two fields, ML and turbulent combustion, have large body of work and knowledge on their own, and this book brings them together and explain the complexities and challenges involved in applying ML techniques to simulate and study reacting flows. This is important as to the world’s total primary energy supply (TPES), since more than 90% of this supply is through combustion technologies and the non-negligible effects of combustion on environment. Although alternative technologies based on renewable energies are coming up, their shares for the TPES is are less than 5% currently and one needs a complete paradigm shift to replace combustion sources. Whether this is practical or not is entirely a different question, and an answer to this question depends on the respondent. However, a pragmatic analysis suggests that the combustion share to TPES is likely to be more than 70% even by 2070. Hence, it will be prudent to take advantage of ML techniques to improve combustion sciences and technologies so that efficient and “greener” combustion systems that are friendlier to the environment can be designed. The book covers the current state of the art in these two topics and outlines the challenges involved, merits and drawbacks of using ML for turbulent combustion simulations including avenues which can be explored to overcome the challenges. The required mathematical equations and backgrounds are discussed with ample references for readers to find further detail if they wish. This book is unique since there is not any book with similar coverage of topics, ranging from big data analysis and machine learning algorithm to their applications for combustion science and system design for energy generation.

Download or read book 2023 Asia Pacific International Symposium on Aerospace Technology APISAT 2023 Proceedings written by Song Fu and published by Springer Nature. This book was released on with total page 1975 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Renewable Fuels written by Jacqueline O'Connor and published by Cambridge University Press. This book was released on 2022-12-15 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: Focusing on a critical aspect of the future clean energy system - renewable fuels - this book will be your complete guide on how these fuels are manufactured, the considerations associated with utilising them, and their real-world applications. Written by experts across the field, the book presents many professional perspectives, providing an in-depth understanding of this crucial topic. Clearly explained and organised into four key parts, this book explores the technical aspects written in an accessible way. First, it discusses the dominant energy conversion approaches and the impact that fuel properties have on system operability. Part II outlines the chemical carrier options available for these conversion devices, including gaseous, liquid, and solid fuels. In the third part, it describes the physics and chemistry of combustion, revealing the issues associated with utilizing these fuels. Finally, Part IV presents real-world case studies, demonstrating the successful pathways towards a net-zero carbon future.

Download or read book Mathematical Modelling of Gas Phase Complex Reaction Systems Pyrolysis and Combustion written by and published by Elsevier. This book was released on 2019-06-07 with total page 1034 pages. Available in PDF, EPUB and Kindle. Book excerpt: Mathematical Modelling of Gas-Phase Complex Reaction Systems: Pyrolysis and Combustion, Volume 45, gives an overview of the different steps involved in the development and application of detailed kinetic mechanisms, mainly relating to pyrolysis and combustion processes. The book is divided into two parts that cover the chemistry and kinetic models and then the numerical and statistical methods. It offers a comprehensive coverage of the theory and tools needed, along with the steps necessary for practical and industrial applications.

Download or read book Analytical Characterization Methods for Crude Oil and Related Products written by Ashutosh K. Shukla and published by John Wiley & Sons. This book was released on 2018-01-09 with total page 295 pages. Available in PDF, EPUB and Kindle. Book excerpt: Basic theory, applications, and recent trends in analytical techniques used in crude oil and related products analysis This book covers the application of different spectroscopic methods to characterize crude oil and related products. Its topics are presented in a pedagogical manner so that those new to the subject can better understand the content. The book begins by familiarizing the reader with the rheological characterization of crude oil and related products. Subsequent chapters are directed towards the current trends of different spectroscopic methods for the characterization of crude oil. Analytical Characterization Methods for Crude Oil and Related Products features chapters on: optical interrogation of petroleum asphaltenes (myths and reality); ESR characterization of organic free radicals in petroleum products; high-field, pulsed, and double resonance studies of crude oils and their derivatives; NMR spectroscopy in bitumen characterization; applications of Raman spectroscopy in crude oil and bitumen characterization; and more. Uses a bottom-up approach—starting from the basic theory of the technique followed by its applications and recent trends in crude oil analysis Includes informative content so as to take a technician to the level of using a particular analytical method Covers relevany information so as to enable a manager in the industry to make purchasing decisions Analytical Characterization Methods for Crude Oil and Related Products is aimed at researchers in academia as well as technicians and developers of new analytical methods in the oil industry and related areas. It will also be of interest to professionals, scientists, and graduate students in analytical sciences dealing with oil and environmental analysis.

Download or read book Turbulent Premixed Flames written by Nedunchezhian Swaminathan and published by Cambridge University Press. This book was released on 2011-04-25 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: A work on turbulent premixed combustion is important because of increased concern about the environmental impact of combustion and the search for new combustion concepts and technologies. An improved understanding of lean fuel turbulent premixed flames must play a central role in the fundamental science of these new concepts. Lean premixed flames have the potential to offer ultra-low emission levels, but they are notoriously susceptible to combustion oscillations. Thus, sophisticated control measures are inevitably required. The editors' intent is to set out the modeling aspects in the field of turbulent premixed combustion. Good progress has been made on this topic, and this cohesive volume contains contributions from international experts on various subtopics of the lean premixed flame problem.

Download or read book Combustion Noise written by Anna Schwarz and published by Springer Science & Business Media. This book was released on 2009-06-17 with total page 304 pages. Available in PDF, EPUB and Kindle. Book excerpt: November, 2008 Anna Schwarz, Johannes Janicka In the last thirty years noise emission has developed into a topic of increasing importance to society and economy. In ?elds such as air, road and rail traf?c, the control of noise emissions and development of associated noise-reduction techno- gies is a central requirement for social acceptance and economical competitiveness. The noise emission of combustion systems is a major part of the task of noise - duction. The following aspects motivate research: • Modern combustion chambers in technical combustion systems with low pol- tion exhausts are 5 - 8 dB louder compared to their predecessors. In the ope- tional state the noise pressure levels achieved can even be 10-15 dB louder. • High capacity torches in the chemical industry are usually placed at ground level because of the reasons of noise emissions instead of being placed at a height suitable for safety and security. • For airplanes the combustion emissions become a more and more important topic. The combustion instability and noise issues are one major obstacle for the introduction of green technologies as lean fuel combustion and premixed burners in aero-engines. The direct and indirect contribution of combustion noise to the overall core noise is still under discussion. However, it is clear that the core noise besides the fan tone will become an important noise source in future aero-engine designs. To further reduce the jet noise, geared ultra high bypass ratio fans are driven by only a few highly loaded turbine stages.

Download or read book Analysis of Kinetic Reaction Mechanisms written by Tamás Turányi and published by Springer. This book was released on 2014-12-29 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: Chemical processes in many fields of science and technology, including combustion, atmospheric chemistry, environmental modelling, process engineering, and systems biology, can be described by detailed reaction mechanisms consisting of numerous reaction steps. This book describes methods for the analysis of reaction mechanisms that are applicable in all these fields. Topics addressed include: how sensitivity and uncertainty analyses allow the calculation of the overall uncertainty of simulation results and the identification of the most important input parameters, the ways in which mechanisms can be reduced without losing important kinetic and dynamic detail, and the application of reduced models for more accurate engineering optimizations. This monograph is invaluable for researchers and engineers dealing with detailed reaction mechanisms, but is also useful for graduate students of related courses in chemistry, mechanical engineering, energy and environmental science and biology.

Download or read book Environmental Engineering Dictionary and Directory written by Thomas M. Pankratz and published by CRC Press. This book was released on 2000-09-22 with total page 340 pages. Available in PDF, EPUB and Kindle. Book excerpt: Like most technical disciplines, environmental science and engineering is becoming increasingly specialized. As industry professionals focus on specific environmental subjects they become less familiar with environmental problems and solutions outside their area of expertise. This situation is compounded by the fact that many environmental science

Download or read book Scramjet Propulsion written by E. T. Curran and published by AIAA. This book was released on 2001 with total page 1354 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Spectroscopy and Optical Diagnostics for Gases written by Ronald K. Hanson and published by Springer. This book was released on 2015-10-26 with total page 290 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text provides an introduction to the science that governs the interaction of light and matter (in the gas phase). It provides readers with the basic knowledge to exploit the light-matter interaction to develop quantitative tools for gas analysis (i.e. optical diagnostics) and understand and interpret the results of spectroscopic measurements. The authors pair the basics of gas‐phase spectroscopy with coverage of key optical diagnostic techniques utilized by practicing engineers and scientists to measure fundamental flow‐field properties. The text is organized to cover three sub‐topics of gas‐phase spectroscopy: (1) spectral line positions, (2) spectral line strengths, and (3) spectral lineshapes by way of absorption, emission, and scattering interactions. The latter part of the book describes optical measurement techniques and equipment. Key subspecialties include laser induced fluorescence, tunable laser absorption spectroscopy, and wavelength modulation spectroscopy. It is ideal for students and practitioners across a range of applied sciences including mechanical, aerospace, chemical, and materials engineering.

Download or read book Characterization and Properties of Petroleum Fractions written by M. R. Riazi and published by ASTM International. This book was released on 2005 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: The last three chapters of this book deal with application of methods presented in previous chapters to estimate various thermodynamic, physical, and transport properties of petroleum fractions. In this chapter, various methods for prediction of physical and thermodynamic properties of pure hydrocarbons and their mixtures, petroleum fractions, crude oils, natural gases, and reservoir fluids are presented. As it was discussed in Chapters 5 and 6, properties of gases may be estimated more accurately than properties of liquids. Theoretical methods of Chapters 5 and 6 for estimation of thermophysical properties generally can be applied to both liquids and gases; however, more accurate properties can be predicted through empirical correlations particularly developed for liquids. When these correlations are developed with some theoretical basis, they are more accurate and have wider range of applications. In this chapter some of these semitheoretical correlations are presented. Methods presented in Chapters 5 and 6 can be used to estimate properties such as density, enthalpy, heat capacity, heat of vaporization, and vapor pressure. Characterization methods of Chapters 2-4 are used to determine the input parameters needed for various predictive methods. One important part of this chapter is prediction of vapor pressure that is needed for vapor-liquid equilibrium calculations of Chapter 9.

Download or read book Fundamentals of Fourier Transform Infrared Spectroscopy written by Brian C. Smith and published by CRC Press. This book was released on 2011-03-09 with total page 198 pages. Available in PDF, EPUB and Kindle. Book excerpt: Reflecting the myriad changes and advancements in the technologies involved in FTIR, particularly the development of diamond ATRs, this second edition of Fundamentals of Fourier Transform Infrared Spectroscopy has been extensively rewritten and expanded to include new topics and figures as well as updates of existing chapters. Designed for those ne

Download or read book The Effect of Spray Initial Conditions on Heat Release and Emissions in LDI Cfd Calculations written by National Aeronautics and Space Adm Nasa and published by Independently Published. This book was released on 2019-01-14 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: The mass and velocity distribution of liquid spray has a primary effect on the combustion heat release process. This heat release process then affects emissions like nitrogen oxides (NOx) and carbon monoxide (CO). Computational Fluid Dynamics gives the engineer insight into these processes, but various setup options exist (number of droplet groups, and initial droplet temperature) for spray initial conditions. This paper studies these spray initial condition options using the National Combustion Code (NCC) on a single swirler lean direct injection (LDI) flame tube. Using laminar finite rate chemistry, comparisons are made against experimental data for velocity measurements, temperature, and emissions (NOx, CO). Iannetti, Anthony C. and Liu, Nan-Suey and Davoudzadeh, Farhad Glenn Research Center

Download or read book Recent Advances in Learning and Control written by Vincent D. Blondel and published by Springer Science & Business Media. This book was released on 2008-01-11 with total page 283 pages. Available in PDF, EPUB and Kindle. Book excerpt: This volume is composed of invited papers on learning and control. The contents form the proceedings of a workshop held in January 2008, in Hyderabad that honored the 60th birthday of Doctor Mathukumalli Vidyasagar. The 14 papers, written by international specialists in the field, cover a variety of interests within the broader field of learning and control. The diversity of the research provides a comprehensive overview of a field of great interest to control and system theorists.

Download or read book Engines and Fuels for Future Transport written by Gautam Kalghatgi and published by Springer Nature. This book was released on 2021-12-13 with total page 403 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on clean transport and mobility essential to the modern world. It discusses internal combustion engines (ICEs) and alternatives like battery electric vehicles (BEVs) which are growing fast. Alternatives to ICEs start from a very low base and face formidable environmental, material availability, and economic challenges to unlimited and rapid growth. Hence ICEs will continue to be the main power source for transport for decades to come and have to be continuously improved to improve transport sustainability. The book highlights the need to assess proposed changes in the existing transport system on a life cycle basis. The volume includes chapters discussing the challenges faced by ICEs as well as chapters on novel fuels and fuel/ engine interactions which help in this quest to improve the efficiency of ICE and reduce exhaust pollutants. This book will be of interest to those in academia and industry alike.