Download or read book Hybridization Diagnostic and Prognostic of PEM Fuel Cells written by Samir Jemei and published by John Wiley & Sons. This book was released on 2018-10-25 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen is the most abundant element in the universe. It has a place in the energy mix of the future, especially regarding fuel cells (FCs). This book is an investigation into FCs. Prominence is given to the subject of PEMFCs (proton exchange membrane fuel cells) as they offer interesting perspectives on transport and stationary applications. This being said, a number of technological and scientific obstacles remain to be overcome before an industrial level of development can be reached.
Download or read book Hybridation diagnostic et pronostic de piles combustible written by Samir Jemeï and published by ISTE Group. This book was released on 2019-01-01 with total page 229 pages. Available in PDF, EPUB and Kindle. Book excerpt: L’hydrogène, l’élément le plus abondant dans l’Univers, a définitivement sa place dans le bouquet énergétique du futur et plus particulièrement dans la technologie des piles à combustible (PAC). Parmi les différents types de PAC, cet ouvrage étudie la technologie PEMFC (Proton Exchange Membrane Fuel Cell) qui offre des perspectives remarquables pour les applications transports et stationnaires. Néanmoins, de nombreux verrous technologiques et scientifiques restent à lever pour atteindre un niveau industriel de développement. Hybridation, diagnostic et pronostic de piles à combustibleprésente ces verrous et examine les solutions qui permettraient de rendre cette technologie plus fiable à court terme. Trois axes principaux sont étudiés : le premier concerne le système des PAC et sa mise en oeuvre expérimentale, le deuxième traite de l’hybridation des générateurs PAC et le dernier analyse les diagnostics et pronostics des PAC.
Download or read book Electrochemical Components written by Marie-Cécile Pera and published by John Wiley & Sons. This book was released on 2013-07-22 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book focuses on the methods of storage commonly used in hybrid systems. After an introductory chapter reviewing the basics of electrochemistry, Chapter 2 is given over to the storage of electricity in the form of hydrogen. Once hydrogen has been made, we have to be able to convert it back into electricity on demand. This can be done with another energy converter: a fuel cell, the subject of Chapter 3. Such a system is unable to deliver significant dynamics in terms of storage and release of electricity and needs to be supplemented with another solution: a detailed study of supercapacitors is provided in Chapter 4.While the storage systems touched upon in the previous three chapters (hydrogen batteries and supercapacitors) both exhibit advantageous characteristics, at present they are still relatively costly. Thus, the days of the electrochemical accumulator by no means appear to be numbered just yet. This will therefore be the topic of Chapter 5. Finally, on the basis of the elements laid down in the previous chapters, Chapter 6 will focus on electrical hybridization of these storage systems, with a view to enhancing the performance (in terms of energy, lifetime, cost, etc.) of the newly formed system. Aimed at an audience of researchers, industrialists, academics, teachers and students, many exercises, along with corrected solutions, are provided throughout the book. Contents 1. Basic Concepts of Electrochemistry used in Electrical Engineering. 2. Water Electrolyzers. 3. Fuel Cells. 4. Electrical Energy Storage by Supercapacitors. 5. Electrochemical Accumulators. 6. Hybrid Electrical System. About the Authors Marie-Cécile Péra is a Full Professor at the University of Franche-Comte in France and Deputy Director of the FEMTO-ST Institute (CNRS). Her research activities include modeling, control and diagnosis of electric power generation systems (fuel cells – PEMFC and SOFC, supercapacities, batteries) for transportation and stationary applications. She has contributed to more than 180 articles in international journals and conferences. Daniel Hissel is Full Professor at the University of Franche-Comte in France and Director of the Fuel Cell Lab Research Federation (CNRS). He also leads a research team devoted to hybrid electrical systems in the FEMTO-ST Institute (CNRS). He has published more than 250 research papers on modeling, control, diagnostics and prognostics of hybrid electrical systems. Hamid Gualous is Full Professor at the University of Caen Lower Normandy in France and director of the LUSAC laboratory. His current research interests include power electronics, electric energy storage, power and energy systems and energy management. Christophe Turpin is Full Researcher at the CNRS (French National Center for Scientific Research). He is responsible for hydrogen activities within the Laboratory LAPLACE, Toulouse, France. His research activities include the characterization and modeling of fuel cells and electrolyzers, the state of health of these components, and their hybridization with other electrochemical components (ultracapacitors, batteries) within optimized energy systems for stationary and aeronautical applications.
Download or read book French English Medical Dictionary written by Alfred Gordon and published by . This book was released on 1921 with total page 180 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Fuel Cells and Hydrogen written by Viktor Hacker and published by Elsevier. This book was released on 2018-07-20 with total page 298 pages. Available in PDF, EPUB and Kindle. Book excerpt: Fuel Cells and Hydrogen: From Fundamentals to Applied Research provides an overview of the basic principles of fuel cell and hydrogen technology, which subsequently allows the reader to delve more deeply into applied research. In addition to covering the basic principles of fuel cells and hydrogen technologies, the book examines the principles and methods to develop and test fuel cells, the evaluation of the performance and lifetime of fuel cells and the concepts of hydrogen production. Fuel Cells and Hydrogen: From Fundamentals to Applied Research acts as an invaluable reference book for fuel cell developers and students, researchers in industry entering the area of fuel cells and lecturers teaching fuel cells and hydrogen technology. - Includes laboratory methods for fuel cell characterization and manufacture - Outlines approaches in modelling components, cells and stacks - Covers practical and theoretical methods for hydrogen production and storage
Download or read book PEM Fuel Cells written by Frano Barbir and published by Academic Press. This book was released on 2012-09-25 with total page 537 pages. Available in PDF, EPUB and Kindle. Book excerpt: Demand for fuel cell technology is growing rapidly. Fuel cells are being commercialized to provide power to buildings like hospitals and schools, to replace batteries in portable electronic devices, and as replacements for internal combustion engines in vehicles. PEM (Proton Exchange Membrane) fuel cells are lighter, smaller, and more efficient than other types of fuel cell. As a result, over 80% of fuel cells being produced today are PEM cells. This new edition of Dr. Barbir's groundbreaking book still lays the groundwork for engineers, technicians and students better than any other resource, covering fundamentals of design, electrochemistry, heat and mass transport, as well as providing the context of system design and applications. Yet it now also provides invaluable information on the latest advances in modeling, diagnostics, materials, and components, along with an updated chapter on the evolving applications areas wherein PEM cells are being deployed. Comprehensive guide covers all aspects of PEM fuel cells, from theory and fundamentals to practical applications Provides solutions to heat and water management problems engineers must face when designing and implementing PEM fuel cells in systems Hundreds of original illustrations, real-life engineering examples, and end-of-chapter problems help clarify, contextualize, and aid understanding
Download or read book Fault tolerant Control Systems written by Hassan Noura and published by Springer Science & Business Media. This book was released on 2009-07-30 with total page 233 pages. Available in PDF, EPUB and Kindle. Book excerpt: The seriesAdvancesinIndustrialControl aims to report and encourage te- nologytransfer in controlengineering. The rapid development of controlte- nology has an impact on all areas of the control discipline. New theory, new controllers, actuators, sensors, new industrial processes, computer methods, new applications, new philosophies. . . , new challenges. Much of this devel- ment work resides in industrial reports, feasibility study papers, and the - ports of advanced collaborative projects. The series o?ers an opportunity for researchers to present an extended exposition of such new work in all aspects of industrial control for wider and rapid dissemination. Control system design and technology continues to develop in many d- ferent directions. One theme that the Advances in Industrial Control series is following is the application of nonlinear control design methods, and the series has some interesting new commissions in progress. However, another theme of interest is how to endow the industrial controller with the ability to overcome faults and process degradation. Fault detection and isolation is a broad ?eld with a research literature spanning several decades. This topic deals with three questions: • How is the presence of a fault detected? • What is the cause of the fault? • Where is it located? However, there has been less focus on the question of how to use the control system to accommodate and overcome the performance deterioration caused by the identi?ed sensor or actuator fault.
Download or read book Hydrogen Storage Technologies written by Mehmet Sankir and published by John Wiley & Sons. This book was released on 2018-07-10 with total page 296 pages. Available in PDF, EPUB and Kindle. Book excerpt: Hydrogen storage is considered a key technology for stationary and portable power generation especially for transportation. This volume covers the novel technologies to efficiently store and distribute hydrogen and discusses the underlying basics as well as the advanced details in hydrogen storage technologies. The book has two major parts: Chemical and electrochemical hydrogen storage and Carbon-based materials for hydrogen storage. The following subjects are detailed in Part I: Multi stage compression system based on metal hydrides Metal-N-H systems and their physico-chemical properties Mg-based nano materials with enhanced sorption kinetics Gaseous and electrochemical hydrogen storage in the Ti-Z-Ni Electrochemical methods for hydrogenation/dehydrogenation of metal hydrides In Part II the following subjects are addressed: Activated carbon for hydrogen storage obtained from agro-industrial waste Hydrogen storage using carbonaceous materials Hydrogen storage performance of composite material consisting of single walled carbon nanotubes and metal oxide nanoparticles Hydrogen storage characteristics of graphene addition of hydrogen storage materials Discussion of the crucial features of hydrogen adsorption of nanotextured carbon-based materials
Download or read book Dictionnaire des termes de m decine written by Henry Eugène de Méric and published by . This book was released on 1899 with total page 262 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Diagnosis and Fault Tolerant Control written by Mogens Blanke and published by Springer Science & Business Media. This book was released on 2006-09-24 with total page 685 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents model-based analysis and design methods for fault diagnosis and fault-tolerant control. Architectural and structural models are used to analyse the propagation of the fault through the process, test fault detectability and reveal redundancies that can be used to ensure fault tolerance. Case studies demonstrate the methods presented. The second edition includes new material on reconfigurable control, diagnosis of nonlinear systems, and remote diagnosis, plus new examples and updated bibliography.
Download or read book Supercapacitors Based on Carbon or Pseudocapacitive Materials written by Patrice Simon and published by John Wiley & Sons. This book was released on 2017-06-26 with total page 130 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electrochemical capacitors are electrochemical energy storage devices able to quickly deliver or store large quantities of energy. They have stimulated numerous innovations throughout the last 20 years and are now implemented in many fields. Supercapacitors Based on Carbon or Pseudocapacitive Materials provides the scientific basis for a better understanding of the characteristics and performance of electrochemical capacitors based on electrochemical double layer electrodes or pseudocapacitive materials, as well as providing information on the design and conception of new devices such as lithium-ion capacitors. This book details the various applications of supercapacitors, ranging from power electronics and stationary use, to transportation (hybrid vehicles, trams, planes, etc.). They are increasingly used in the automotive sector, especially as part of stop/start systems that have allowed for energy recovery through braking and reduced fuel consumption.
Download or read book Metamodelling written by Peter Gawthrop and published by . This book was released on 1996 with total page 0 pages. Available in PDF, EPUB and Kindle. Book excerpt: With the increasing complexity of processes to be analyzed, the modern control engineer often needs to develop a model of the system to be controlled. However, in many cases, there is limited time for detailed system analysis, and the engineer may not be an expert in that particular domain. This work takes an engineering approach to bond graph modelling of dynamic systems, and provides an in-depth study of causality in the context of physical system modelling.
Download or read book PEM Fuel Cell Testing and Diagnosis written by Jiujun Zhang and published by Newnes. This book was released on 2013-01-22 with total page 391 pages. Available in PDF, EPUB and Kindle. Book excerpt: PEM Fuel Cell Testing and Diagnosis covers the recent advances in PEM (proton exchange membrane) fuel cell systems, focusing on instruments and techniques for testing and diagnosis, and the application of diagnostic techniques in practical tests and operation. This book is a unique source of electrochemical techniques for researchers, scientists and engineers working in the area of fuel cells. Proton exchange membrane fuel cells are currently considered the most promising clean energy-converting devices for stationary, transportation, and micro-power applications due to their high energy density, high efficiency, and environmental friendliness. To advance research and development of this emerging technology, testing and diagnosis are an essential combined step. This book aids those efforts, addressing effects of humidity, temperature and pressure on fuel cells, degradation and failure analysis, and design and assembly of MEAs, single cells and stacks. - Provides fundamental and theoretical principles for PEM fuel cell testing and diagnosis. - Comprehensive source for selecting techniques, experimental designs and data analysis - Analyzes PEM fuel cell degradation and failure mechanisms, and suggests failure mitigation strategies - Provides principles for selecting PEM fuel cell key materials to improve durability
Download or read book Thermal Conductivity 15 written by and published by . This book was released on 1978 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book Modeling of Liquid Phases written by Michel Soustelle and published by John Wiley & Sons. This book was released on 2015-08-31 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a set of books which offers advanced students successive characterization tool phases, the study of all types of phase (liquid, gas and solid, pure or multi-component), process engineering, chemical and electrochemical equilibria, and the properties of surfaces and phases of small sizes. Macroscopic and microscopic models are in turn covered with a constant correlation between the two scales. Particular attention has been given to the rigor of mathematical developments. This second volume in the set is devoted to the study of liquid phases.
Download or read book Thermodynamics of Surfaces and Capillary Systems written by Michel Soustelle and published by John Wiley & Sons. This book was released on 2016-06-20 with total page 264 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is part of a set of books which offers advanced students successive characterization tool phases, the study of all types of phase (liquid, gas and solid, pure or multi-component), process engineering, chemical and electrochemical equilibria, and the properties of surfaces and phases of small sizes. Macroscopic and microscopic models are in turn covered with a constant correlation between the two scales. Particular attention has been given to the rigor of mathematical developments. This volume, the final of the Chemical Thermodynamics Set, offers an in-depth examination of chemical thermodynamics. The author uses systems of liquids, vapors, solids and mixtures of these in thermodynamic approaches to determine the influence of the temperature and pressure on the surface tension and its consequences on specific heat capacities and latent heats. Electro-capillary phenomena, the thermodynamics of cylindrical capillary and small volume-phases are also discussed, along with a thermodynamic study of the phenomenon of nucleation of a condensed phase and the properties of thin liquid films. The final chapters discuss the phenomena of physical adsorption and chemical adsorption of gases by solid surfaces. In an Appendix, applications of physical adsorption for the determination of the specific areas of solids and their porosity are given.
Download or read book Electrodes for Li ion Batteries written by Laure Monconduit and published by John Wiley & Sons. This book was released on 2015-06-29 with total page 100 pages. Available in PDF, EPUB and Kindle. Book excerpt: The electrochemical energy storage is a means to conserve electrical energy in chemical form. This form of storage benefits from the fact that these two energies share the same vector, the electron. This advantage allows us to limit the losses related to the conversion of energy from one form to another. The RS2E focuses its research on rechargeable electrochemical devices (or electrochemical storage) batteries and supercapacitors. The materials used in the electrodes are key components of lithium-ion batteries. Their nature depend battery performance in terms of mass and volume capacity, energy density, power, durability, safety, etc. This book deals with current and future positive and negative electrode materials covering aspects related to research new and better materials for future applications (related to renewable energy storage and transportation in particular), bringing light on the mechanisms of operation, aging and failure.
