Download or read book Improved Indirect Power Control IDPC of Wind Energy Conversion Systems WECS written by Fayssal Amrane and published by Bentham Science Publishers. This book was released on 2019-07-26 with total page 148 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind power capacity in the world has been increased by more than 30% over the last decade in countries which have prominent installations. Wind energy conversion systems (WECSs) based on the doubly-fed induction generator (DFIG) have dominated the wind power generation sector due to the outstanding advantages they provide, including small converter ratings (around 30% of the generator rating) and lower converter costs. Due to the non-linearity of wind power systems, the DFIG power control setup presents a big challenge especially under conditions of high variance in wind-speed and parameter sensing. To overcome these major problems, an improved IDPC (Indirect Power Control) system based on PID (Proportional-Integral-Derivative) controller, has been proposed instead of the conventional power inverters. This handbook covers information about IDPC based WECS. The book starts with a general introduction to wind power system basics. Subsequent chapters provide additional knowledge about robustness tests and adaptive / intelligent control systems employed in wind energy systems. The new concept of direct and quadrature current control (Ird & Irq) under MPPT (Maximum Power Point Tracking) strategy is also explained along with novel fuzzy logic type control systems. The authors have included detailed diagrams and an appendix of WECS parameters, making this handbook a useful primer for engineering students working towards completing licenses, Masters degrees and Post-graduation programs in advanced wind power energy systems.

Download or read book Permanent Magnet Brushless DC Motor Drives and Controls written by Chang-liang Xia and published by John Wiley & Sons. This book was released on 2012-04-24 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced introduction to the simulation and hardware implementation of BLDC motor drives A thorough reference on the simulation and hardware implementation of BLDC motor drives, this book covers recent advances in the control of BLDC motor drives, including intelligent control, sensorless control, torque ripple reduction and hardware implementation. With the guidance of the expert author team, readers will understand the principle, modelling, design and control of BLDC motor drives. The advanced control methods and new achievements of BLDC motor drives, of interest to more advanced readers, are also presented. Focuses on the control of PM brushless DC motors, giving readers the foundations to the topic that they can build on through more advanced reading Systematically guides readers through the subject, introducing basic operational principles before moving on to advanced control algorithms and implementations Covers special issues, such as sensorless control, intelligent control, torque ripple reduction and hardware implementation, which also have applications to other types of motors Includes presentation files with lecture notes and Matlab 7 coding on a companion website for the book

Download or read book Metaheuristics and Optimization in Computer and Electrical Engineering written by Navid Razmjooy and published by Springer Nature. This book was released on 2020-11-16 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The use of artificial intelligence, especially in the field of optimization is increasing day by day. The purpose of this book is to explore the possibility of using different kinds of optimization algorithms to advance and enhance the tools used for computer and electrical engineering purposes.

Download or read book Advanced Hybrid Information Processing written by Shuai Liu and published by Springer Nature. This book was released on 2022-01-18 with total page 523 pages. Available in PDF, EPUB and Kindle. Book excerpt: This two-volume set constitutes the post-conference proceedings of the 5th EAI International Conference on Advanced Hybrid Information Processing, ADHIP 2021, held in October 2021. Due to COVID-19 the conference was held virtually. The 94 papers presented were selected from 254 submissions and focus on theory and application of hybrid information processing technology for smarter and more effective research and application. The theme of ADHIP 2020 was “Social hybrid data processing”. The papers are named in topical sections as follows: Intelligent algorithms in complex environment; AI system research and model design; Method research on Internet of Things technology; Research and analysis with intelligent education.

Download or read book High Performance Control of AC Drives with Matlab Simulink Models written by Haitham Abu-Rub and published by John Wiley & Sons. This book was released on 2012-04-13 with total page 460 pages. Available in PDF, EPUB and Kindle. Book excerpt: A comprehensive guide to understanding AC machines with exhaustive simulation models to practice design and control Nearly seventy percent of the electricity generated worldwide is used by electrical motors. Worldwide, huge research efforts are being made to develop commercially viable three- and multi-phase motor drive systems that are economically and technically feasible. Focusing on the most popular AC machines used in industry – induction machine and permanent magnet synchronous machine – this book illustrates advanced control techniques and topologies in practice and recently deployed. Examples are drawn from important techniques including Vector Control, Direct Torque Control, Nonlinear Control, Predictive Control, multi-phase drives and multilevel inverters. Key features include: systematic coverage of the advanced concepts of AC motor drives with and without output filter; discussion on the modelling, analysis and control of three- and multi-phase AC machine drives, including the recently developed multi-phase-phase drive system and double fed induction machine; description of model predictive control applied to power converters and AC drives, illustrated together with their simulation models; end-of-chapter questions, with answers and PowerPoint slides available on the companion website www.wiley.com/go/aburub_control This book integrates a diverse range of topics into one useful volume, including most the latest developments. It provides an effective guideline for students and professionals on many vital electric drives aspects. It is an advanced textbook for final year undergraduate and graduate students, and researchers in power electronics, electric drives and motor control. It is also a handy tool for specialists and practicing engineers wanting to develop and verify their own algorithms and techniques.

Download or read book Nonlinear Control and Filtering Using Differential Flatness Approaches written by Gerasimos G. Rigatos and published by Springer. This book was released on 2015-06-05 with total page 755 pages. Available in PDF, EPUB and Kindle. Book excerpt: This monograph presents recent advances in differential flatness theory and analyzes its use for nonlinear control and estimation. It shows how differential flatness theory can provide solutions to complicated control problems, such as those appearing in highly nonlinear multivariable systems and distributed-parameter systems. Furthermore, it shows that differential flatness theory makes it possible to perform filtering and state estimation for a wide class of nonlinear dynamical systems and provides several descriptive test cases. The book focuses on the design of nonlinear adaptive controllers and nonlinear filters, using exact linearization based on differential flatness theory. The adaptive controllers obtained can be applied to a wide class of nonlinear systems with unknown dynamics, and assure reliable functioning of the control loop under uncertainty and varying operating conditions. The filters obtained outperform other nonlinear filters in terms of accuracy of estimation and computation speed. The book presents a series of application examples to confirm the efficiency of the proposed nonlinear filtering and adaptive control schemes for various electromechanical systems. These include: · industrial robots; · mobile robots and autonomous vehicles; · electric power generation; · electric motors and actuators; · power electronics; · internal combustion engines; · distributed-parameter systems; and · communication systems. Differential Flatness Approaches to Nonlinear Control and Filtering will be a useful reference for academic researchers studying advanced problems in nonlinear control and nonlinear dynamics, and for engineers working on control applications in electromechanical systems.

Download or read book Modern Electric Hybrid Electric and Fuel Cell Vehicles written by Mehrdad Ehsani and published by CRC Press. This book was released on 2018-02-02 with total page 546 pages. Available in PDF, EPUB and Kindle. Book excerpt: "This book is an introduction to automotive technology, with specic reference to battery electric, hybrid electric, and fuel cell electric vehicles. It could serve electrical engineers who need to know more about automobiles or automotive engineers who need to know about electrical propulsion systems. For example, this reviewer, who is a specialist in electric machinery, could use this book to better understand the automobiles for which the reviewer is designing electric drive motors. An automotive engineer, on the other hand, might use it to better understand the nature of motors and electric storage systems for application in automobiles, trucks or motorcycles. The early chapters of the book are accessible to technically literate people who need to know something about cars. While the rst chapter is historical in nature, the second chapter is a good introduction to automobiles, including dynamics of propulsion and braking. The third chapter discusses, in some detail, spark ignition and compression ignition (Diesel) engines. The fourth chapter discusses the nature of transmission systems.” —James Kirtley, Massachusetts Institute of Technology, USA “The third edition covers extensive topics in modern electric, hybrid electric, and fuel cell vehicles, in which the profound knowledge, mathematical modeling, simulations, and control are clearly presented. Featured with design of various vehicle drivetrains, as well as a multi-objective optimization software, it is an estimable work to meet the needs of automotive industry.” —Haiyan Henry Zhang, Purdue University, USA “The extensive combined experience of the authors have produced an extensive volume covering a broad range but detailed topics on the principles, design and architectures of Modern Electric, Hybrid Electric, and Fuel Cell Vehicles in a well-structured, clear and concise manner. The volume offers a complete overview of technologies, their selection, integration & control, as well as an interesting Technical Overview of the Toyota Prius. The technical chapters are complemented with example problems and user guides to assist the reader in practical calculations through the use of common scientic computing packages. It will be of interest mainly to research postgraduates working in this eld as well as established academic researchers, industrial R&D engineers and allied professionals.” —Christopher Donaghy-Sparg, Durham University, United Kingdom The book deals with the fundamentals, theoretical bases, and design methodologies of conventional internal combustion engine (ICE) vehicles, electric vehicles (EVs), hybrid electric vehicles (HEVs), and fuel cell vehicles (FCVs). The design methodology is described in mathematical terms, step-by-step, and the topics are approached from the overall drive train system, not just individual components. Furthermore, in explaining the design methodology of each drive train, design examples are presented with simulation results. All the chapters have been updated, and two new chapters on Mild Hybrids and Optimal Sizing and Dimensioning and Control are also included • Chapters updated throughout the text. • New homework problems, solutions, and examples. • Includes two new chapters. • Features accompanying MATLABTM software.

Download or read book Advances in Clean Energy Technologies written by Prashant V. Baredar and published by Springer Nature. This book was released on 2021-05-30 with total page 1130 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select proceedings of the international conference on Innovations in Clean Energy Technologies (ICET 2020) and examines a range of durable, energy efficient and next-generation smart green technologies for sustainable future by reflecting on the trends, advances and development taking place all across the globe. The topics covered include smart technologies based product, energy efficient systems, solar and wind energy, carbon sequestration, green transportation, green buildings, energy material, biomass energy, smart cites, hydro power, bio-energy and fuel cell. The book also discusses various performance attributes of these clean energy technologies and their workability and carbon footprint. The book will be a valuable reference for beginners, researchers and professionals interested in clean energy technologies.

Download or read book Advances in System Dynamics and Control written by Azar, Ahmad Taher and published by IGI Global. This book was released on 2018-02-09 with total page 706 pages. Available in PDF, EPUB and Kindle. Book excerpt: Complex systems are pervasive in many areas of science. With the increasing requirement for high levels of system performance, complex systems has become an important area of research due to its role in many industries. Advances in System Dynamics and Control provides emerging research on the applications in the field of control and analysis for complex systems, with a special emphasis on how to solve various control design and observer design problems, nonlinear systems, interconnected systems, and singular systems. Featuring coverage on a broad range of topics, such as adaptive control, artificial neural network, and synchronization, this book is an important resource for engineers, professionals, and researchers interested in applying new computational and mathematical tools for solving the complicated problems of mathematical modeling, simulation, and control.

Download or read book IAENG Transactions on Engineering Technologies written by Gi-Chul Yang and published by Springer Science & Business Media. This book was released on 2014-07-08 with total page 763 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book contains fifty-eight revised and extended research articles written by prominent researchers participating in the Advances in Engineering Technologies and Physical Science conference, held in London, U.K., 4-6 July, 2012. Topics covered include Applied and Engineering Mathematics, Computational Statistics, Mechanical Engineering, Bioengineering, Internet Engineering, Wireless Networks, Knowledge Engineering, Computational Intelligence, High Performance Computing, Manufacturing Engineering, and industrial applications. The book offers the state of art of tremendous advances in engineering technologies and physical science and applications, and also serves as an excellent reference work for researchers and graduate students working on engineering technologies and physical science and applications.

Download or read book Automation Control and Energy Efficiency in Complex Systems written by Hamid Khayyam and published by MDPI. This book was released on 2020-12-22 with total page 242 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is aimed at serving researchers, engineers, scientists, and engineering graduate and PhD students of engineering and physical science together with individuals interested in engineering and science. This book focuses on the application of engineering methods to complex systems including transportation, building, and manufacturing, with approaches representing a wide variety of disciplines of engineering and science. Throughout the book, great emphases are placed on engineering applications of complex systems, as well as the methodologies of automation, including artificial intelligence, automated and intelligent control, energy analysis, energy modelling, energy management, and optimised energy efficiency. The significant impact of recent studies that have been selected for presentation are of high interest in engineering complex systems. An attempt has been made to expose the reading audience of engineers and researchers to a broad range of theoretical and practical topics. The topics contained in the present book are of specific interest to engineers who are seeking expertise in transportation, building, and manufacturing technologies as well as mathematical modelling of complex systems, engineering approaches to engineering complex problems, automation via artificial intelligence methods, automated and intelligent control, and energy systems. The primary audience of this book are researchers, graduate students, and engineers in mechanical engineering, control engineering, computer engineering, electrical engineering, and science disciplines. In particular, the book can be used for training graduate and PhD students as well as senior undergraduate students to enhance their knowledge by taking a graduate or advanced undergraduate course in the areas of complex systems, control systems, energy systems, and engineering applications. The covered research topics are also of interest to engineers and academia who are seeking to expand their expertise in these areas.

Download or read book Index to IEEE Publications written by Institute of Electrical and Electronics Engineers and published by . This book was released on 1997 with total page 1468 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control Strategies of Permanent Magnet Synchronous Motor Drive for Electric Vehicles written by Chiranjit Sain and published by CRC Press. This book was released on 2022-10-25 with total page 179 pages. Available in PDF, EPUB and Kindle. Book excerpt: To reduce the emissions of greenhouse gasses and maintain environmental sustainability, electric vehicles play a vital role in a modern energy-efficient environment. Permanent magnet synchronous motors (PMSMs) are widely employed in electric vehicle technology due to their high dynamic response, better torque-speed characteristics, noiseless operation, high power density, high efficiency and power factor as compared to other conventional motor drives. This book demonstrates the development of various control strategies and illustrates the dynamic performance intensification of a PMSM drive. To ensure the faster dynamic behaviour and flexibility in control under various operating conditions, the performance of a PMSM drive has been explained. Finally, control strategies have been executed through mathematical modelling and illustration of several case studies for optimal operation. Features: Introduces performance indicators in a self-controlled PMSM machine to justify the dynamic behaviour Discusses comparative performance study and optimization of the drive performance Provides a detailed comparative performance analysis between classical and fuzzy logic controllers in a PMSM drive Includes illustrations and case studies using mathematical modelling and real-time test results Discusses the state of the art in solar-powered energy-efficient PMSM drives with various issues This book is aimed at researchers, graduate students and libraries in electrical engineering with specialization in electric vehicles.

Download or read book Advanced Control Systems for Electric Drives written by Adel Merabet and published by MDPI. This book was released on 2020-12-07 with total page 342 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides extensive information about advanced control techniques in electric drives. Multiple control and estimation methods are studied for position and speed tracking in different drives. Artificial intelligence tools, such as fuzzy logic and neural networks, are used for specific applications using electric drives.

Download or read book Science Abstracts written by and published by . This book was released on 1995 with total page 1990 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Advances in Computing Communication Automation and Biomedical Technology written by M. G. Sumithra and published by IJAICT India Publications . This book was released on 2020-12-30 with total page 518 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Computing, Communication, Automation and Biomedical Technology aims to bring together leading academic, scientists, researchers, industry representatives, postdoctoral fellows and research scholars around the world to share their knowledge and research expertise, to advances in the areas of Computing, Communication, Electrical, Civil, Mechanical and Biomedical Systems as well as to create a prospective collaboration and networking on various areas. It also provides a premier interdisciplinary platform for researchers, practitioners, and educators to present and discuss the most recent innovations, trends, and concerns as well as practical challenges encountered, and solutions adopted in the fields of innovation.

Download or read book Advanced Intelligent Computing Technology and Applications written by De-Shuang Huang and published by Springer Nature. This book was released on 2023-07-30 with total page 823 pages. Available in PDF, EPUB and Kindle. Book excerpt: This three-volume set of LNCS 14086, LNCS 14087 and LNCS 14088 constitutes - in conjunction with the double-volume set LNAI 14089-14090- the refereed proceedings of the 19th International Conference on Intelligent Computing, ICIC 2023, held in Zhengzhou, China, in August 2023. The 337 full papers of the three proceedings volumes were carefully reviewed and selected from 828 submissions. This year, the conference concentrated mainly on the theories and methodologies as well as the emerging applications of intelligent computing. Its aim was to unify the picture of contemporary intelligent computing techniques as an integral concept that highlights the trends in advanced computational intelligence and bridges theoretical research with applications. Therefore, the theme for this conference was "Advanced Intelligent Computing Technology and Applications". Papers that focused on this theme were solicited, addressing theories, methodologies, and applications in science and technology.