Download or read book Hybrid PID Based Predictive Control Strategies for WirelessHART Networked Control Systems written by Sabo Miya Hassan and published by Springer Nature. This book was released on 2020-05-12 with total page 165 pages. Available in PDF, EPUB and Kindle. Book excerpt: Recent advances in wireless technology have led to the emergence of industry standards such as WirelessHART. These strategies minimise the need for cumbersome cabling, thereby reducing costs. However, applying them involves the challenge of handling stochastic network delays, which can degrade control performance. To address this problem, commonly used simple PID could be employed. However, PID suffers from gain range limitations when used in a delayed environment. Furthermore, model-based controllers are complex and require exact models of the process and systematic system identification for implementation. Therefore, to address these issues, the book proposes control strategies that retain the simplicity of PID in terms of ease of tuning and structure, while improving on the performance of the closed-loop system with regard to stochastic network delays and mismatches. Concretely, it proposes and discusses three strategies, namely: Setpoint Weighting (SW), Filtered Predictive PI (FPPI) and Optimal Fuzzy PID. In order to optimise some of these controllers, two novel hybrid optimisation algorithms combining the dynamism of the Bacterial Foraging Algorithm (BFA) and advantages of both the Spiral Dynamic Algorithm (SDA) and the Accelerated Particle Swarm Optimisation (APSO) have been used. The strategies proposed here can also be applied in stochastic control scenarios (not necessarily wireless) characterised by uncertainties. This book will be useful to engineers and researchers in both industry and academia. In industry, it will be particularly useful to research and development efforts where PID controllers and wireless sensor networks (WSNs) involving both short and long term stochastic network delay are employed. Thus, it can be used for real-time control design in these areas. In the academic setting, the book will be useful for researchers, undergraduate and graduate students of instrumentation and control. It can also be used as reference material for teaching courses on predictive and adaptive controls and their application.

Download or read book Networked and Distributed Predictive Control written by Panagiotis D. Christofides and published by Springer Science & Business Media. This book was released on 2011-04-07 with total page 253 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked and Distributed Predictive Control presents rigorous, yet practical, methods for the design of networked and distributed predictive control systems – the first book to do so. The design of model predictive control systems using Lyapunov-based techniques accounting for the influence of asynchronous and delayed measurements is followed by a treatment of networked control architecture development. This shows how networked control can augment dedicated control systems in a natural way and takes advantage of additional, potentially asynchronous and delayed measurements to maintain closed loop stability and significantly to improve closed-loop performance. The text then shifts focus to the design of distributed predictive control systems that cooperate efficiently in computing optimal manipulated input trajectories that achieve desired stability, performance and robustness specifications but spend a fraction of the time required by centralized control systems. Key features of this book include: • new techniques for networked and distributed control system design; • insight into issues associated with networked and distributed predictive control and their solution; • detailed appraisal of industrial relevance using computer simulation of nonlinear chemical process networks and wind- and solar-energy-generation systems; and • integrated exposition of novel research topics and rich resource of references to significant recent work. A full understanding of Networked and Distributed Predictive Control requires a basic knowledge of differential equations, linear and nonlinear control theory and optimization methods and the book is intended for academic researchers and graduate students studying control and for process control engineers. The constant attention to practical matters associated with implementation of the theory discussed will help each of these groups understand the application of the book’s methods in greater depth.

Download or read book PID and Predictive Control of Electrical Drives and Power Converters using MATLAB Simulink written by Liuping Wang and published by John Wiley & Sons. This book was released on 2015-03-02 with total page 369 pages. Available in PDF, EPUB and Kindle. Book excerpt: A timely introduction to current research on PID and predictive control by one of the leading authors on the subject PID and Predictive Control of Electric Drives and Power Supplies using MATLAB/Simulink examines the classical control system strategies, such as PID control, feed-forward control and cascade control, which are widely used in current practice. The authors share their experiences in actual design and implementation of the control systems on laboratory test-beds, taking the reader from the fundamentals through to more sophisticated design and analysis. The book contains sections on closed-loop performance analysis in both frequency domain and time domain, presented to help the designer in selection of controller parameters and validation of the control system. Continuous-time model predictive control systems are designed for the drives and power supplies, and operational constraints are imposed in the design. Discrete-time model predictive control systems are designed based on the discretization of the physical models, which will appeal to readers who are more familiar with sampled-data control system. Soft sensors and observers will be discussed for low cost implementation. Resonant control of the electric drives and power supply will be discussed to deal with the problems of bias in sensors and unbalanced three phase AC currents. Brings together both classical control systems and predictive control systems in a logical style from introductory through to advanced levels Demonstrates how simulation and experimental results are used to support theoretical analysis and the proposed design algorithms MATLAB and Simulink tutorials are given in each chapter to show the readers how to take the theory to applications. Includes MATLAB and Simulink software using xPC Target for teaching purposes A companion website is available Researchers and industrial engineers; and graduate students on electrical engineering courses will find this a valuable resource.

Download or read book Predictive Control for Linear and Hybrid Systems written by Francesco Borrelli and published by Cambridge University Press. This book was released on 2017-06-22 with total page 447 pages. Available in PDF, EPUB and Kindle. Book excerpt: With a simple approach that includes real-time applications and algorithms, this book covers the theory of model predictive control (MPC).

Download or read book Predictive Control Applied to Networked Control Systems written by Xunhe Yin and published by . This book was released on 2012 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Predictive Control Applied to Networked Control Systems.

Download or read book Fuzzy Adaptive Setpoint Weighting Controller for WirelessHART Networked Control Systems written by Sabo Miya Hassan and published by . This book was released on 2017 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Gain range limitation of conventional proportional-integral-derivative (PID) controllers has made them unsuitable for application in a delayed environment. These controllers are also not suitable for use in a Wireless Highway Addressable Remote Transducer (WirelessHART) protocol networked control setup. This is due to stochastic network-induced delay and uncertainties such as packet dropout. The use of setpoint weighting strategy has been proposed to improve the performance of the PID in such environments. However, the stochastic delay still makes it difficult to achieve optimal performance. This chapter proposes an adaptation to the setpoint weighting technique. The proposed approach will be used to adapt the setpoint weighting structure to variation in WirelessHART network-induced delay through fuzzy inference. Result comparison of the proposed approach with both setpoint weighting and proportional-integral (PI) control strategy shows improved setpoint tracking and load regulation. For the first-, second- and third-order systems considered, analysis of the results in the time domain shows that in terms of overshoot, undershoot, rise time, and settling times, the proposed approach outperforms both the setpoint weighting and the PI controller. The approach also shows faster recovery from disturbance effect.

Download or read book Networked Predictive Control Systems written by Hua Ouyang and published by LAP Lambert Academic Publishing. This book was released on 2010-05 with total page 164 pages. Available in PDF, EPUB and Kindle. Book excerpt: Networked predictive control is a new research method for networked control systems, which can handle network-induced problems such as time-delays, data dropouts, packets disorders, etc. and stabilise the networked control systems. This work has extensively studied the following problems: robust control of networked predictive linear control systems, control scheme for networked nonlinear control systems and robust control of networked nonlinear control systems. This work provides a theoretical framework for stability analysis and robust controller synthesis for networked predictive control systems. In this work, both time-driven and event-driven predictive controllers are used to stabilise the networked predictive control systems.

Download or read book Predictive Functional Control written by Jacques Richalet and published by Springer. This book was released on 2009-05-25 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: first industrial application of MPC was in 1973. A key motivation was to provide better performance than could be obtained with the widely-used PID controller whilst making it easy to replace the PID controller unit or module with his new algorithm. It was the advent of digital control technology and the use of software control algorithms that made this replacement easier and more acceptable to process engineers. A decade of industrial practice with PFC was reported in the archival literature by Jacques Richalet et al. in 1978 in an important seminal Automatica paper. Around this time, Cutler and Ramaker published the dynamic matrix control algorithm that also used knowledge of future reference signals to determine a sequence of control signal adjustment. Thus, the theoretical and practical development of predictive control methods was underway and subsequent developments included those of generalized predictive control, and the whole armoury of MPC methods. Jacques Richalet’s approach to PFC was to seek an algorithm that was: • easy to understand; • easy to install; • easy to tune and optimise. He sought a new modular control algorithm that could be readily used by the control-technician engineer or the control-instrument engineer. It goes without saying that this objective also forms a good market strategy.

Download or read book PID and Model Predictive Control in a Networked Environment written by Graham W. Alldredge and published by . This book was released on 2007 with total page 234 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Networked and Distributed Predictive Control written by Panagiotis D. Christofides and published by . This book was released on 2011-04-01 with total page 260 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book Control of Dead time Processes written by Julio E. Normey-Rico and published by Springer Science & Business Media. This book was released on 2007-06-14 with total page 474 pages. Available in PDF, EPUB and Kindle. Book excerpt: This text introduces the fundamental techniques for controlling dead-time processes from simple monovariable to complex multivariable cases. Dead-time-process-control problems are studied using classical proportional-integral-differential (PID) control for the simpler examples and dead-time-compensator (DTC) and model predictive control (MPC) methods for progressively more complex ones. Downloadable MATLAB® code makes the examples and ideas more convenient and simpler.

Download or read book WirelessHARTTM written by Tran Duc Chung and published by CRC Press. This book was released on 2017-11-22 with total page 145 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents a guideline for EWMA filter design for industrial wireless networked control system, both theoretically and practically. The filter’s key advantages are simple, effective, low computational overhead. This book also provides a guideline for practical implementation of EWMA filter for improving networked control performance of various process plants. It further discusses not only the advantages of the filter, but also the limitations and how to avoid them when implementing the filter from practical point of view.

Download or read book Process Identification and PID Control written by Su Whan Sung and published by John Wiley & Sons. This book was released on 2009-07-23 with total page 352 pages. Available in PDF, EPUB and Kindle. Book excerpt: Process Identification and PID Control enables students and researchers to understand the basic concepts of feedback control, process identification, autotuning as well as design and implement feedback controllers, especially, PID controllers. The first The first two parts introduce the basics of process control and dynamics, analysis tools (Bode plot, Nyquist plot) to characterize the dynamics of the process, PID controllers and tuning, advanced control strategies which have been widely used in industry. Also, simple simulation techniques required for practical controller designs and research on process identification and autotuning are also included. Part 3 provides useful process identification methods in real industry. It includes several important identification algorithms to obtain frequency models or continuous-time/discrete-time transfer function models from the measured process input and output data sets. Part 4 introduces various relay feedback methods to activate the process effectively for process identification and controller autotuning. Combines the basics with recent research, helping novice to understand advanced topics Brings several industrially important topics together: Dynamics Process identification Controller tuning methods Written by a team of recognized experts in the area Includes all source codes and real-time simulated processes for self-practice Contains problems at the end of every chapter PowerPoint files with lecture notes available for instructor use

Download or read book Control Loop Foundation written by Terrence L. Blevins and published by ISA. This book was released on 2011 with total page 425 pages. Available in PDF, EPUB and Kindle. Book excerpt: In this in-depth book, the authors address the concepts and terminology that are needed to work in the field of process control. The material is presented in a straightforward manner that is independent of the control system manufacturer. It is assumed that the reader may not have worked in a process plant environment and may be unfamiliar with the field devices and control systems. Much of the material on the practical aspects of control design and process applications is based on the authors personal experience gained in working with process control systems. Thus, the book is written to act as a guide for engineers, managers, technicians, and others that are new to process control or experienced control engineers who are unfamiliar with multi-loop control techniques. After the traditional single-loop and multi-loop techniques that are most often used in industry are covered, a brief introduction to advanced control techniques is provided. Whether the reader of this book is working as a process control engineer, working in a control group or working in an instrument department, the information will set the solid foundation needed to understand and work with existing control systems or to design new control applications. At various points in the chapters on process characterization and control design, the reader has an opportunity to apply what was learned using web-based workshops. The only items required to access these workshops are a high-speed Internet connection and a web browser. Dynamic process simulations are built into the workshops to give the reader a realistic "hands-on" experience. Also, one chapter of the book is dedicated to techniques that may be used to create process simulations using tools that are commonly available within most distributed control systems. At various points in the chapters on process characterization and control design, the reader has an opportunity to apply what was learned using web-based workshops. The only items required to access these workshops are a high-speed Internet connection and a web browser. Dynamic process simulations are built into the workshops to give the reader a realistic "hands-on" experience. Also, one chapter of the book is dedicated to techniques that may be used to create process simulations using tools that are commonly available within most distributed control systems. As control techniques are introduced, simple process examples are used to illustrate how these techniques are applied in industry. The last chapter of the book, on process applications, contains several more complex examples from industry that illustrate how basic control techniques may be combined to meet a variety of application requirements. As control techniques are introduced, simple process examples are used to illustrate how these techniques are applied in industry. The last chapter of the book, on process applications, contains several more complex examples from industry that illustrate how basic control techniques may be combined to meet a variety of application requirements.

Download or read book Industrial Sensors and Controls in Communication Networks written by Dong-Seong Kim and published by Springer. This book was released on 2018-12-11 with total page 291 pages. Available in PDF, EPUB and Kindle. Book excerpt: This informative text/reference presents a detailed review of the state of the art in industrial sensor and control networks. The book examines a broad range of applications, along with their design objectives and technical challenges. The coverage includes fieldbus technologies, wireless communication technologies, network architectures, and resource management and optimization for industrial networks. Discussions are also provided on industrial communication standards for both wired and wireless technologies, as well as for the Industrial Internet of Things (IIoT). Topics and features: describes the FlexRay, CAN, and Modbus fieldbus protocols for industrial control networks, as well as the MIL-STD-1553 standard; proposes a dual fieldbus approach, incorporating both CAN and ModBus fieldbus technologies, for a ship engine distributed control system; reviews a range of industrial wireless sensor network (IWSN) applications, from environmental sensing and condition monitoring, to process automation; examines the wireless networking performance, design requirements, and technical limitations of IWSN applications; presents a survey of IWSN commercial solutions and service providers, and summarizes the emerging trends in this area; discusses the latest technologies and open challenges in realizing the vision of the IIoT, highlighting various applications of the IIoT in industrial domains; introduces a logistics paradigm for adopting IIoT technology on the Physical Internet. This unique work will be of great value to all researchers involved in industrial sensor and control networks, wireless networking, and the Internet of Things.

Download or read book Instrument Engineers Handbook Volume 3 written by Bela G. Liptak and published by CRC Press. This book was released on 2018-10-08 with total page 1140 pages. Available in PDF, EPUB and Kindle. Book excerpt: Instrument Engineers' Handbook – Volume 3: Process Software and Digital Networks, Fourth Edition is the latest addition to an enduring collection that industrial automation (AT) professionals often refer to as the "bible." First published in 1970, the entire handbook is approximately 5,000 pages, designed as standalone volumes that cover the measurement (Volume 1), control (Volume 2), and software (Volume 3) aspects of automation. This fourth edition of the third volume provides an in-depth, state-of-the-art review of control software packages used in plant optimization, control, maintenance, and safety. Each updated volume of this renowned reference requires about ten years to prepare, so revised installments have been issued every decade, taking into account the numerous developments that occur from one publication to the next. Assessing the rapid evolution of automation and optimization in control systems used in all types of industrial plants, this book details the wired/wireless communications and software used. This includes the ever-increasing number of applications for intelligent instruments, enhanced networks, Internet use, virtual private networks, and integration of control systems with the main networks used by management, all of which operate in a linked global environment. Topics covered include: Advances in new displays, which help operators to more quickly assess and respond to plant conditions Software and networks that help monitor, control, and optimize industrial processes, to determine the efficiency, energy consumption, and profitability of operations Strategies to counteract changes in market conditions and energy and raw material costs Techniques to fortify the safety of plant operations and the security of digital communications systems This volume explores why the holistic approach to integrating process and enterprise networks is convenient and efficient, despite associated problems involving cyber and local network security, energy conservation, and other issues. It shows how firewalls must separate the business (IT) and the operation (automation technology, or AT) domains to guarantee the safe function of all industrial plants. This book illustrates how these concerns must be addressed using effective technical solutions and proper management policies and practices. Reinforcing the fact that all industrial control systems are, in general, critically interdependent, this handbook provides a wide range of software application examples from industries including: automotive, mining, renewable energy, steel, dairy, pharmaceutical, mineral processing, oil, gas, electric power, utility, and nuclear power.

Download or read book Engineering Mathematics written by C W. Evans and published by Routledge. This book was released on 2019-03-04 with total page 814 pages. Available in PDF, EPUB and Kindle. Book excerpt: The programmed approach, established in the first two editions is maintained in the third and it provides a sound foundation from which the student can build a solid engineering understanding. This edition has been modified to reflect the changes in the syllabuses which students encounter before beginning undergraduate studies. The first two chapters include material that assumes the reader has little previous experience in maths. Written by CHarles Evans who lectures at the University of Portsmouth and has been teaching engineering and applied mathematics for more than 25 years. This text provides one of the essential tools for both undergraduate students and professional engineers.