Download or read book Hybrid Electric Vehicle Design and Control Intelligent Omnidirectional Hybrids written by Yangsheng Xu and published by McGraw Hill Professional. This book was released on 2013-11-18 with total page 303 pages. Available in PDF, EPUB and Kindle. Book excerpt: Introduction. System design and implementation. Four - wheel independent steering control. Battery management system. Energy management system. Conclusions.

Download or read book Hybrid Electric Vehicle Design and Control Intelligent Omnidirectional Hybrids written by Yangsheng Xu and published by McGraw Hill Professional. This book was released on 2013-09-22 with total page 302 pages. Available in PDF, EPUB and Kindle. Book excerpt: Build state-of-the-art intelligent omnidirectional HEVs Engineer high-performance, low-emission automobiles by overcoming traditional obstacles and efficiently harnessing energy from multiple sources. Hybrid Electric Vehicle Design and Control features complete coverage of all electrical, mechanical, and software components. Find out how to develop fast-charging battery systems, efficiently manage power, implement independent steering and force control, and enhance driving stability and controllability. This comprehensive guide offers detailed modeling, testing, and tuning techniques and provides an overview of emerging developments in hybrid technologies. Coverage includes: 4WIS and 4WID hardware and software Hybrid vehicle design structures Zero-radius turning and lateral parking Steer-by-wire and extended steering Behavior-based and zero-radius steering Traction force distribution and stability Battery, energy, and power management systems Cell equalization and fast-charging control MPC, load forecasting, and neural network classifi cation Best performance techniques

Download or read book Hybrid Electric Vehicles written by Chris Mi and published by John Wiley & Sons. This book was released on 2011-05-23 with total page 449 pages. Available in PDF, EPUB and Kindle. Book excerpt: Modern Hybrid Electric Vehicles provides vital guidance to help a new generation of engineers master the principles of and further advance hybrid vehicle technology. The authors address purely electric, hybrid electric, plug-in hybrid electric, hybrid hydraulic, fuel cell, and off-road hybrid vehicle systems. They focus on the power and propulsion systems for these vehicles, including issues related to power and energy management. They concentrate on material that is not readily available in other hybrid electric vehicle (HEV) books such as design examples for hybrid vehicles, and cover new developments in the field including electronic CVT, plug-in hybrid, and new power converters and controls. Covers hybrid vs. pure electric, HEV system architecture (including plug-in and hydraulic), off-road and other industrial utility vehicles, non-ground-vehicle applications like ships, locomotives, aircrafts, system reliability, EMC, storage technologies, vehicular power and energy management, diagnostics and prognostics, and electromechanical vibration issues. Contains core fundamentals and principles of modern hybrid vehicles at component level and system level. Provides graduate students and field engineers with a text suitable for classroom teaching or self-study.

Download or read book Intelligent Control of Connected Plug in Hybrid Electric Vehicles written by Amir Taghavipour and published by Springer. This book was released on 2018-09-26 with total page 202 pages. Available in PDF, EPUB and Kindle. Book excerpt: Intelligent Control of Connected Plug-in Hybrid Electric Vehicles presents the development of real-time intelligent control systems for plug-in hybrid electric vehicles, which involves control-oriented modelling, controller design, and performance evaluation. The controllers outlined in the book take advantage of advances in vehicle communications technologies, such as global positioning systems, intelligent transportation systems, geographic information systems, and other on-board sensors, in order to provide look-ahead trip data. The book contains simple and efficient models and fast optimization algorithms for the devised controllers to address the challenge of real-time implementation in the design of complex control systems. Using the look-ahead trip information, the authors of the book propose intelligent optimal model-based control systems to minimize the total energy cost, for both grid-derived electricity and fuel. The multilayer intelligent control system proposed consists of trip planning, an ecological cruise controller, and a route-based energy management system. An algorithm that is designed to take advantage of previewed trip information to optimize battery depletion profiles is presented in the book. Different control strategies are compared and ways in which connecting vehicles via vehicle-to-vehicle communication can improve system performance are detailed. Intelligent Control of Connected Plug-in Hybrid Electric Vehicles is a useful source of information for postgraduate students and researchers in academic institutions participating in automotive research activities. Engineers and designers working in research and development for automotive companies will also find this book of interest. Advances in Industrial Control reports and encourages the transfer of technology in control engineering. The rapid development of control technology has an impact on all areas of the control discipline. The series offers an opportunity for researchers to present an extended exposition of new work in all aspects of industrial control.

Download or read book Introduction to Hybrid Vehicle System Modeling and Control written by Wei Liu and published by John Wiley & Sons. This book was released on 2013-02-08 with total page 428 pages. Available in PDF, EPUB and Kindle. Book excerpt: This is an engineering reference book on hybrid vehicle system analysis and design, an outgrowth of the author's substantial work in research, development and production at the National Research Council Canada, Azure Dynamics and now General Motors. It is an irreplaceable tool for helping engineers develop algorithms and gain a thorough understanding of hybrid vehicle systems. This book covers all the major aspects of hybrid vehicle modeling, control, simulation, performance analysis and preliminary design. It not only systemically provides the basic knowledge of hybrid vehicle system configuration and main components, but also details their characteristics and mathematic models. Provides valuable technical expertise necessary for building hybrid vehicle system and analyzing performance via drivability, fuel economy and emissions Built from the author's industry experience at major vehicle companies including General Motors and Azure Dynamics Inc. Offers algorithm implementations and figures/examples extracted from actual practice systems Suitable for a training course on hybrid vehicle system development with supplemental materials An essential resource enabling hybrid development and design engineers to understand the hybrid vehicle systems necessary for control algorithm design and developments.

Download or read book Hybrid Electric Vehicle System Modeling and Control written by Wei Liu and published by John Wiley & Sons. This book was released on 2017-04-17 with total page 584 pages. Available in PDF, EPUB and Kindle. Book excerpt: This new edition includes approximately 30% new materials covering the following information that has been added to this important work: extends the contents on Li-ion batteries detailing the positive and negative electrodes and characteristics and other components including binder, electrolyte, separator and foils, and the structure of Li-ion battery cell. Nickel-cadmium batteries are deleted. adds a new section presenting the modelling of multi-mode electrically variable transmission, which gradually became the main structure of the hybrid power-train during the last 5 years. newly added chapter on noise and vibration of hybrid vehicles introduces the basics of vibration and noise issues associated with power-train, driveline and vehicle vibrations, and addresses control solutions to reduce the noise and vibration levels. Chapter 10 (chapter 9 of the first edition) is extended by presenting EPA and UN newly required test drive schedules and test procedures for hybrid electric mileage calculation for window sticker considerations. In addition to the above major changes in this second edition, adaptive charging sustaining point determination method is presented to have a plug-in hybrid electric vehicle with optimum performance.

Download or read book Electric and Hybrid Vehicles written by Iqbal Husain and published by CRC Press. This book was released on 2021-02-22 with total page 702 pages. Available in PDF, EPUB and Kindle. Book excerpt: A thoroughly revised third edition of this widely praised, bestselling textbook presents a comprehensive systems-level perspective of electric and hybrid vehicles with emphasis on technical aspects, mathematical relationships and basic design guidelines. The emerging technologies of electric vehicles require the dedication of current and future engineers, so the target audience for the book is the young professionals and students in engineering eager to learn about the area. The book is concise and clear, its mathematics are kept to a necessary minimum and it contains a well-balanced set of contents of the complex technology. Engineers of multiple disciplines can either get a broader overview or explore in depth a particular aspect of electric or hybrid vehicles. Additions in the third edition include simulation-based design analysis of electric and hybrid vehicles and their powertrain components, particularly that of traction inverters, electric machines and motor drives. The technology trends to incorporate wide bandgap power electronics and reduced rare-earth permanent magnet electric machines in the powertrain components have been highlighted. Charging stations are a critical component for the electric vehicle infrastructure, and hence, a chapter on vehicle interactions with the power grid has been added. Autonomous driving is another emerging technology, and a chapter is included describing the autonomous driving system architecture and the hardware and software needs for such systems. The platform has been set in this book for system-level simulations to develop models using various softwares used in academia and industry, such as MATLAB®/Simulink, PLECS, PSIM, Motor-CAD and Altair Flux. Examples and simulation results are provided in this edition using these software tools. The third edition is a timely revision and contribution to the field of electric vehicles that has reached recently notable markets in a more and more environmentally sensitive world.

Download or read book Hybrid Electric Vehicles written by Chris Mi and published by John Wiley & Sons. This book was released on 2017-09-11 with total page 599 pages. Available in PDF, EPUB and Kindle. Book excerpt: The latest developments in the field of hybrid electric vehicles Hybrid Electric Vehicles provides an introduction to hybrid vehicles, which include purely electric, hybrid electric, hybrid hydraulic, fuel cell vehicles, plug-in hybrid electric, and off-road hybrid vehicular systems. It focuses on the power and propulsion systems for these vehicles, including issues related to power and energy management. Other topics covered include hybrid vs. pure electric, HEV system architecture (including plug-in & charging control and hydraulic), off-road and other industrial utility vehicles, safety and EMC, storage technologies, vehicular power and energy management, diagnostics and prognostics, and electromechanical vibration issues. Hybrid Electric Vehicles, Second Edition is a comprehensively updated new edition with four new chapters covering recent advances in hybrid vehicle technology. New areas covered include battery modelling, charger design, and wireless charging. Substantial details have also been included on the architecture of hybrid excavators in the chapter related to special hybrid vehicles. Also included is a chapter providing an overview of hybrid vehicle technology, which offers a perspective on the current debate on sustainability and the environmental impact of hybrid and electric vehicle technology. Completely updated with new chapters Covers recent developments, breakthroughs, and technologies, including new drive topologies Explains HEV fundamentals and applications Offers a holistic perspective on vehicle electrification Hybrid Electric Vehicles: Principles and Applications with Practical Perspectives, Second Edition is a great resource for researchers and practitioners in the automotive industry, as well as for graduate students in automotive engineering.

Download or read book Electric and Hybrid Vehicles written by Amir Khajepour and published by John Wiley & Sons. This book was released on 2014-03-05 with total page 506 pages. Available in PDF, EPUB and Kindle. Book excerpt: An advanced level introductory book covering fundamental aspects, design and dynamics of electric and hybrid electric vehicles There is significant demand for an understanding of the fundamentals, technologies, and design of electric and hybrid electric vehicles and their components from researchers, engineers, and graduate students. Although there is a good body of work in the literature, there is still a great need for electric and hybrid vehicle teaching materials. Electric and Hybrid Vehicles: Technologies, Modeling and Control – A Mechatronic Approach is based on the authors’ current research in vehicle systems and will include chapters on vehicle propulsion systems, the fundamentals of vehicle dynamics, EV and HEV technologies, chassis systems, steering control systems, and state, parameter and force estimations. The book is highly illustrated, and examples will be given throughout the book based on real applications and challenges in the automotive industry. Designed to help a new generation of engineers needing to master the principles of and further advances in hybrid vehicle technology Includes examples of real applications and challenges in the automotive industry with problems and solutions Takes a mechatronics approach to the study of electric and hybrid electric vehicles, appealing to mechanical and electrical engineering interests Responds to the increase in demand of universities offering courses in newer electric vehicle technologies

Download or read book Reinforcement Learning Enabled Intelligent Energy Management for Hybrid Electric Vehicles written by Teng Liu and published by Morgan & Claypool Publishers. This book was released on 2019-09-03 with total page 99 pages. Available in PDF, EPUB and Kindle. Book excerpt: Powertrain electrification, fuel decarburization, and energy diversification are techniques that are spreading all over the world, leading to cleaner and more efficient vehicles. Hybrid electric vehicles (HEVs) are considered a promising technology today to address growing air pollution and energy deprivation. To realize these gains and still maintain good performance, it is critical for HEVs to have sophisticated energy management systems. Supervised by such a system, HEVs could operate in different modes, such as full electric mode and power split mode. Hence, researching and constructing advanced energy management strategies (EMSs) is important for HEVs performance. There are a few books about rule- and optimization-based approaches for formulating energy management systems. Most of them concern traditional techniques and their efforts focus on searching for optimal control policies offline. There is still much room to introduce learning-enabled energy management systems founded in artificial intelligence and their real-time evaluation and application. In this book, a series hybrid electric vehicle was considered as the powertrain model, to describe and analyze a reinforcement learning (RL)-enabled intelligent energy management system. The proposed system can not only integrate predictive road information but also achieve online learning and updating. Detailed powertrain modeling, predictive algorithms, and online updating technology are involved, and evaluation and verification of the presented energy management system is conducted and executed.

Download or read book Electric and Plug In Hybrid Vehicles written by Bogdan Ovidiu Varga and published by Springer. This book was released on 2015-06-12 with total page 536 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is designed as an interdisciplinary platform for specialists working in electric and plug-in hybrid electric vehicles powertrain design and development, and for scientists who want to get access to information related to electric and hybrid vehicle energy management, efficiency and control. The book presents the methodology of simulation that allows the specialist to evaluate electric and hybrid vehicle powertrain energy flow, efficiency, range and consumption. The mathematics behind each electric and hybrid vehicle component is explained and for each specific vehicle the powertrain is analyzed and output results presented through the use of specific automotive industrial software (AVL Cruise , IPG CarMaker, AVL Concerto). This methodology of electric and hybrid powertrain design serves to broaden understanding of how the energy flow, efficiency, range and consumption of these vehicles can be adjusted, updated and predicted via development processes.

Download or read book Optimal Control of Hybrid Vehicles written by Bram de Jager and published by Springer Science & Business Media. This book was released on 2013-04-05 with total page 159 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimal Control of Hybrid Vehicles provides a description of power train control for hybrid vehicles. The background, environmental motivation and control challenges associated with hybrid vehicles are introduced. The text includes mathematical models for all relevant components in the hybrid power train. The power split problem in hybrid power trains is formally described and several numerical solutions detailed, including dynamic programming and a novel solution for state-constrained optimal control problems based on the maximum principle. Real-time-implementable strategies that can approximate the optimal solution closely are dealt with in depth. Several approaches are discussed and compared, including a state-of-the-art strategy which is adaptive for vehicle conditions like velocity and mass. Three case studies are included in the book: • a control strategy for a micro-hybrid power train; • experimental results obtained with a real-time strategy implemented in a hybrid electric truck; and • an analysis of the optimal component sizes for a hybrid power train. Optimal Control of Hybrid Vehicles will appeal to academic researchers and graduate students interested in hybrid vehicle control or in the applications of optimal control. Practitioners working in the design of control systems for the automotive industry will also find the ideas propounded in this book of interest.

Download or read book Electric and Hybrid Vehicles written by Tom Denton and published by Routledge. This book was released on 2020-06-29 with total page 210 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric and hybrid vehicles are now the present, not the future. This straightforward and highly illustrated full colour textbook is endorsed by the Institute of the Motor Industry and introduces the subject for further education and undergraduate students as well as technicians. This new edition includes a new section on diagnostics and completely updated case studies. It covers the different types of electric vehicle, costs and emissions, and the charging infrastructure, before moving on to explain how hybrid and electric vehicles work. A chapter on electrical technology introduces learners to subjects such as batteries, control systems and charging which are then covered in more detail within their own chapters. The book also covers the maintenance and repair procedures of these vehicles, including fault finding, servicing, repair and first-responder information. Clear diagrams, photos and flow charts outline the charging infrastructure, how EV technology works, and how to repair and maintain hybrid and electric vehicles. Optional IMI online eLearning materials enable students to study the subject further and test their knowledge. It is particularly suitable for students studying towards IMI Level 2 Award in Hybrid Electric Vehicle Operation and Maintenance, IMI Level 3 Award in Hybrid Electric Vehicle Repair and Replacement, IMI Accreditation, C&G and other EV/Hybrid courses.

Download or read book Hybrid Vehicles written by BADIN François and published by Editions TECHNIP. This book was released on 2013-07-04 with total page 526 pages. Available in PDF, EPUB and Kindle. Book excerpt: The fast growth in world population and the associated energy requirements, the announced depletion of fossil fuel resources, the continuing rise in greenhouse gas (GHG) emissions with the induced climatic changes represent some of the major challenges to be taken up in the coming years and decades. Hybridization therefore typically represents a transition technology which can significantly improve the energy and environmental performance of current vehicles, without radically changing their use typologies, while opening the way to new propulsion modes for the longer term. It is nevertheless a complex subject requiring a multidisciplinary approach. This book, which is intended to be exhaustive, considers the vehicle, its components, their association and their control, as well as the global balances determined over the vehicle lifetime. It starts with a general presentation of the various conditions of use of vehicles, to give readers an understanding of the stakes related to the development of hybrid vehicles and the methods used to compare the performance of the various solutions. The principles and the various types of internal combustion engine and electrical drives, onboard energy storage systems, principles, architectures, specific components and operation of hybrid drivetrains, as well as the energy management in these vehicles, are developed. A global analysis of the various drivetrains life cycle assessment (LCA), total costs and availability of sensitive materials is also provided. This book is intended for everyone involved in the design, manufacture and implementation of hybrid drive vehicles and their components. It will also be of interest to students, teachers and researchers wishing to acquire or further their knowledge in all fields impacted by drivetrain electrification. More globally, after consulting this book, readers will be in a position to evaluate the technologies related to the concept of drivetrain hybridization, their implementation, balances and generalization conditions. This book is available in French Under the title "Véhicules hybrides". Contents : 1. Vehicle use. 2. Internal combustion engines. 3. Electric drivetrain. 4. On-board energy storage systems. 5. Hybridization. 6. Control of hybrid vehicles. 7. Comparative study of hybrid vehicles: greenhouse gas emissions, energy consumption, and cost. Appendixes.

Download or read book Electric and Hybrid Vehicles written by Iqbal Husain and published by CRC Press. This book was released on 2011-06-27 with total page 510 pages. Available in PDF, EPUB and Kindle. Book excerpt: Thoroughly updated to encompass the significant technological advances since the publication of the first edition, Electric and Hybrid Vehicles: Design Fundamentals, Second Edition presents the design fundamentals, component sizing, and systems interactions of alternative vehicles. This new edition of a widely praised, bestselling textbook maintains the comprehensive, systems-level perspective of electric and hybrid vehicles while covering the hybrid architectures and components of the vehicle in much greater detail. The author emphasizes technical details, mathematical relationships, and design guidelines throughout the text. New to the Second Edition New chapters on sizing and design guidelines for various hybrid architectures, control strategies for hybrid vehicles, powertrain component cooling systems, and in-vehicle communication methods New sections on modeling of energy storage components, tire-road force mechanics, compressed air-storage, DC/DC converters, emission control systems, electromechanical brakes, and vehicle fuel economy Reorganization of power electronics, electric machines, and motor drives sections Enhanced sections on mechanical components that now include more technical descriptions and example problems An emphasis on the integration of mechanical and electrical components, taking into account the interdisciplinary nature of automotive engineering As an advisor to the University of Akron’s team in the Challenge X: Crossover to Sustainable Mobility, Dr. Husain knows first-hand how to teach students both the fundamentals and cutting-edge technologies of the next generation of automotives. This text shows students how electrical and mechanical engineers must work together to complete an alternative vehicle system. It empowers them to carry on state-of-the-art research and development in automotive engineering in order to meet today’s needs of clean, efficient, and sustainable vehicles.

Download or read book Application of Artificial Intelligence in Hybrid Electric Vehicle Energy Management written by Jili Tao and published by Elsevier. This book was released on 2024-05-23 with total page 348 pages. Available in PDF, EPUB and Kindle. Book excerpt: Application of Artificial Intelligence in Hybrid Electric Vehicle Energy Management presents the state-of-the-art in hybrid electric vehicle system modelling and management. With a focus on learning-based energy management strategies, the book provides detailed methods, mathematical models, and strategies designed to optimize the energy management of the energy supply module of a hybrid vehicle.The book first addresses the underlying problems in Hybrid Electric Vehicle (HEV) modeling, and then introduces several artificial intelligence-based energy management strategies of HEV systems, including those based on fuzzy control with driving pattern recognition, multi objective optimization, fuzzy Q-learning and Deep Deterministic Policy Gradient (DDPG) algorithms. To help readers apply these management strategies, the book also introduces State of Charge and State of Health prediction methods and real time driving pattern recognition. For each application, the detailed experimental process, program code, experimental results, and algorithm performance evaluation are provided.Application of Artificial Intelligence in Hybrid Electric Vehicle Energy Management is a valuable reference for anyone involved in the modelling and management of hybrid electric vehicles, and will be of interest to graduate students, researchers, and professionals working on HEVs in the fields of energy, electrical, and automotive engineering. - Provides a guide to the modeling and simulation methods of hybrid electric vehicle energy systems, including fuel cell systems - Describes the fundamental concepts and theory behind CNN, MPC, fuzzy control, multi objective optimization, fuzzy Q-learning and DDPG - Explains how to use energy management methods such as parameter estimation, Q-learning, and pattern recognition, including battery State of Health and State of Charge prediction, and vehicle operating conditions

Download or read book Electric and Hybrid Vehicles written by Gianfranco Pistoia and published by Elsevier. This book was released on 2010-07-27 with total page 671 pages. Available in PDF, EPUB and Kindle. Book excerpt: Electric and Hybrid Vehicles: Power Sources, Models, Sustainability, Infrastructure and the Market reviews the performance, cost, safety, and sustainability of battery systems for hybrid electric vehicles (HEVs) and electric vehicles (EVs), including nickel-metal hydride batteries and Li-ion batteries. Throughout this book, especially in the first chapters, alternative vehicles with different power trains are compared in terms of lifetime cost, fuel consumption, and environmental impact. The emissions of greenhouse gases are particularly dealt with. The improvement of the battery, or fuel cell, performance and governmental incentives will play a fundamental role in determining how far and how substantial alternative vehicles will penetrate into the market. An adequate recharging infrastructure is of paramount importance for the diffusion of vehicles powered by batteries and fuel cells, as it may contribute to overcome the so-called range anxiety."" Thus, proposed battery charging techniques are summarized and hydrogen refueling stations are described. The final chapter reviews the state of the art of the current models of hybrid and electric vehicles along with the powertrain solutions adopted by the major automakers. - Contributions from the worlds leading industry and research experts - Executive summaries of specific case studies - Information on basic research and application approaches