Download or read book Hybrid CMOS Single electron transistor Device and Circuit Design written by Santanu Mahapatra and published by Artech House Publishers. This book was released on 2006 with total page 252 pages. Available in PDF, EPUB and Kindle. Book excerpt: CD-ROM contains SET analytical model MIB coded in C++, MATLAB, and Verilog-A language, allowing user to cosimulate and codesign hybrid CMOS-SET circuits. Numerous circuit examples are also provided.
Download or read book Single electron Devices and Circuits in Silicon written by Zahid Ali Khan Durrani and published by World Scientific. This book was released on 2010 with total page 300 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book reviews research on single-electron devices and circuits in silicon. These devices provide a means to control electronic charge at the one-electron level and are promising systems for the development of few-electron, nanoscale electronic circuits. The book considers the design, fabrication, and characterization of single-electron transistors, single-electron memories, few-electron transfer devices such as electron pumps and turnstiles, and single-electron logic devices. A review of the many different approaches used for the experimental realisation of these devices is provided and devices developed during the author''s own research are used as detailed examples. An introduction to the physics of single-electron charging effects is included. Sample Chapter(s). Chapter 1: Introduction (301 KB). Contents: Introduction; Single-Electron Charging Effects; Single-Electron Transistors in Silicon; Single-Electron Memory; Few-Electron Transfer Devices; Single-Electron Logic Circuits. Readership: Researchers, academics, and postgraduate students in nanoelectronics, nanofabrication, nanomaterials and nanostructures, quantum physics and electrical & electronic engineering.
Download or read book Implementing Single Electron Device in Standard CMOS Process written by Mayank Bhatnagar and published by . This book was released on 2008 with total page 266 pages. Available in PDF, EPUB and Kindle. Book excerpt: Single Electronics is the ability to control the movement of single electrons in a circuit. The single electron devices are expected to allow much higher densities of circuits than presently possible while permitting very low power applications. The devices available in literature do not conform to the conventional CMOS process and a resultant high investment for a new technology is blocking the progress of this field. We have proposed a simple design which is fully compliant with the contemporary CMOS process. Novel CMOS designs are implemented to allow measurement of the feeble output from SEDs. The existing circuit model for the single electron device are discussed and compared. A new model for the device is proposed which is a natural charge based model. A couple of new circuit designs are presented which use the SED, not as a switch but with its higher order functionality of quantizing charge.
Download or read book Single Electron Devices and Circuits Design written by Hamendra Singh Jatav and published by LAP Lambert Academic Publishing. This book was released on 2012 with total page 60 pages. Available in PDF, EPUB and Kindle. Book excerpt: This comprehensive contains text covering basics of Single Electron Transistor. It provides analysis of Single Electron Transistor (SET) and SET based logic design. The text dealt in this book develops some important techniques of full adder design with SET as a basic building block instead of CMOS or other logic. The techniques discussed proves better results in terms of voltage gain and other parameters.
Download or read book Computational Advancement in Communication Circuits and Systems written by Koushik Maharatna and published by Springer. This book was released on 2015-03-17 with total page 498 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book comprises the proceedings of 1st International Conference on Computational Advancement in Communication Circuits and Systems (ICCACCS 2014) organized by Narula Institute of Technology under the patronage of JIS group, affiliated to West Bengal University of Technology. The conference was supported by Technical Education Quality Improvement Program (TEQIP), New Delhi, India and had technical collaboration with IEEE Kolkata Section, along with publication partner by Springer. The book contains 62 refereed papers that aim to highlight new theoretical and experimental findings in the field of Electronics and communication engineering including interdisciplinary fields like Advanced Computing, Pattern Recognition and Analysis, Signal and Image Processing. The proceedings cover the principles, techniques and applications in microwave & devices, communication & networking, signal & image processing, and computations & mathematics & control. The proceedings reflect the conference’s emphasis on strong methodological approaches and focus on applications within the domain of Computational Advancement in Communication Circuits and Systems. The content also emphasizes the emerging technologies in the Electronics and Communication field together in close examinations of practices, problems and trends.
Download or read book Emerging Technology Trends in Electronics Communication and Networking written by Shilpi Gupta and published by Springer Nature. This book was released on 2020-07-22 with total page 292 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book constitutes refereed proceedings of the Third International Conference on Emerging Technology Trends in Electronics, Communication and Networking, ET2ECN 2020, held in Surat, India, in February 2020. The 17 full papers and 6 short papers presented were thorougly reviewed and selected from 70 submissions. The volume covers a wide range of topics including electronic devices, VLSI design and fabrication, photo electronics, systems and applications, integrated optics, embedded systems, wireless communication, optical communication, free space optics, signal processing, image/ audio/ video processing, wireless sensor networks, next generation networks, network security, and many others.
Download or read book CMOS Analog and Mixed Signal Circuit Design written by Arjuna Marzuki and published by CRC Press. This book was released on 2020-05-12 with total page 311 pages. Available in PDF, EPUB and Kindle. Book excerpt: The purpose of this book is to provide a complete working knowledge of the Complementary Metal-Oxide Semiconductor (CMOS) analog and mixed-signal circuit design, which can be applied for System on Chip (SOC) or Application-Specific Standard Product (ASSP) development. It begins with an introduction to the CMOS analog and mixed-signal circuit design with further coverage of basic devices, such as the Metal-Oxide Semiconductor Field-Effect Transistor (MOSFET) with both long- and short-channel operations, photo devices, fitting ratio, etc. Seven chapters focus on the CMOS analog and mixed-signal circuit design of amplifiers, low power amplifiers, voltage regulator-reference, data converters, dynamic analog circuits, color and image sensors, and peripheral (oscillators and Input/Output [I/O]) circuits, and Integrated Circuit (IC) layout and packaging. Features: Provides practical knowledge of CMOS analog and mixed-signal circuit design Includes recent research in CMOS color and image sensor technology Discusses sub-blocks of typical analog and mixed-signal IC products Illustrates several design examples of analog circuits together with layout Describes integrating based CMOS color circuit
Download or read book Computational Science and Engineering written by Arpan Deyasi and published by CRC Press. This book was released on 2016-12-19 with total page 355 pages. Available in PDF, EPUB and Kindle. Book excerpt: Computational Science and Engineering contains peer-reviewed research presented at the International Conference on Computational Science and Engineering (RCC Institute of Information Technology, Kolkata, India, 4-6 October 2016). The contributions cover a wide range of topics: - electronic devices - photonics - electromagnetics - soft computing - artificial intelligence - modern communication systems Focussing on strong theoretical and methodological approaches and applications, Computational Science and Engineering will be of interest to academia and professionals involved or interested in the above mentioned domains.
Download or read book Nano CMOS Circuit and Physical Design written by Ban Wong and published by John Wiley & Sons. This book was released on 2005-04-08 with total page 413 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on the authors' expansive collection of notes taken over the years, Nano-CMOS Circuit and Physical Design bridges the gap between physical and circuit design and fabrication processing, manufacturability, and yield. This innovative book covers: process technology, including sub-wavelength optical lithography; impact of process scaling on circuit and physical implementation and low power with leaky transistors; and DFM, yield, and the impact of physical implementation.
Download or read book Advances in VLSI and Embedded Systems written by Zuber Patel and published by Springer Nature. This book was released on 2020-08-28 with total page 299 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents select peer-reviewed proceedings of the International Conference on Advances in VLSI and Embedded Systems (AVES 2019) held at SVNIT, Surat, Gujarat, India. The book covers cutting-edge original research in VLSI design, devices and emerging technologies, embedded systems, and CAD for VLSI. With an aim to address the demand for complex and high-functionality systems as well as portable consumer electronics, the contents focus on basic concepts of circuit and systems design, fabrication, testing, and standardization. This book can be useful for students, researchers as well as industry professionals interested in emerging trends in VLSI and embedded systems.
Download or read book Compact Models for Integrated Circuit Design written by Samar K. Saha and published by CRC Press. This book was released on 2018-09-03 with total page 385 pages. Available in PDF, EPUB and Kindle. Book excerpt: Compact Models for Integrated Circuit Design: Conventional Transistors and Beyond provides a modern treatise on compact models for circuit computer-aided design (CAD). Written by an author with more than 25 years of industry experience in semiconductor processes, devices, and circuit CAD, and more than 10 years of academic experience in teaching compact modeling courses, this first-of-its-kind book on compact SPICE models for very-large-scale-integrated (VLSI) chip design offers a balanced presentation of compact modeling crucial for addressing current modeling challenges and understanding new models for emerging devices. Starting from basic semiconductor physics and covering state-of-the-art device regimes from conventional micron to nanometer, this text: Presents industry standard models for bipolar-junction transistors (BJTs), metal-oxide-semiconductor (MOS) field-effect-transistors (FETs), FinFETs, and tunnel field-effect transistors (TFETs), along with statistical MOS models Discusses the major issue of process variability, which severely impacts device and circuit performance in advanced technologies and requires statistical compact models Promotes further research of the evolution and development of compact models for VLSI circuit design and analysis Supplies fundamental and practical knowledge necessary for efficient integrated circuit (IC) design using nanoscale devices Includes exercise problems at the end of each chapter and extensive references at the end of the book Compact Models for Integrated Circuit Design: Conventional Transistors and Beyond is intended for senior undergraduate and graduate courses in electrical and electronics engineering as well as for researchers and practitioners working in the area of electron devices. However, even those unfamiliar with semiconductor physics gain a solid grasp of compact modeling concepts from this book.
Download or read book Device Circuit Co Design Issues in FETs written by Shubham Tayal and published by CRC Press. This book was released on 2023-08-22 with total page 280 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides an overview of emerging semiconductor devices and their applications in electronic circuits, which form the foundation of electronic devices. Device Circuit Co-Design Issues in FETs provides readers with a better understanding of the ever-growing field of low-power electronic devices and their applications in the wireless, biosensing, and circuit domains. The book brings researchers and engineers from various disciplines of the VLSI domain together to tackle the emerging challenges in the field of engineering and applications of advanced low-power devices in an effort to improve the performance of these technologies. The chapters examine the challenges and scope of FinFET device circuits, 3D FETs, and advanced FET for circuit applications. The book also discusses low-power memory design, neuromorphic computing, and issues related to thermal reliability. The authors provide a good understanding of device physics and circuits, and discuss transistors based on the new channel/dielectric materials and device architectures to achieve low-power dissipation and ultra-high switching speeds to fulfill the requirements of the semiconductor industry. This book is intended for students, researchers, and professionals in the field of semiconductor devices and nanodevices, as well as those working on device-circuit co-design issues.
Download or read book Design and Simulation of Logic Circuits Using Single Electron Transistors written by Aranggan Venkataratnam and published by . This book was released on 2008 with total page 386 pages. Available in PDF, EPUB and Kindle. Book excerpt:
Download or read book 2011 International Conference in Electrics Communication and Automatic Control Proceedings written by Ran Chen and published by Springer Science & Business Media. This book was released on 2011-11-25 with total page 1704 pages. Available in PDF, EPUB and Kindle. Book excerpt: 2011 International Conference in Electrics, Communication and Automatic Control Proceedings examines state-of-art and advances in Electrics, Communication and Automatic Control. This book presents developments in Power Conversion, Signal and image processing, Image & video Signal Processing. The conference brings together researchers, engineers, academic as well as industrial professionals from all over the world to promote the developments of Electrics, Communication and Automatic Control.
Download or read book Device Modeling for Analog and RF CMOS Circuit Design written by Trond Ytterdal and published by John Wiley & Sons. This book was released on 2003-08-01 with total page 306 pages. Available in PDF, EPUB and Kindle. Book excerpt: Bridges the gap between device modelling and analog circuit design. Includes dedicated software enabling actual circuit design. Covers the three significant models: BSIM3, Model 9 &, and EKV. Presents practical guidance on device development and circuit implementation. The authors offer a combination of extensive academic and industrial experience.
Download or read book Advances in Electronics Communication and Computing written by Akhtar Kalam and published by Springer. This book was released on 2017-10-27 with total page 808 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book is a compilation of research work in the interdisciplinary areas of electronics, communication, and computing. This book is specifically targeted at students, research scholars and academicians. The book covers the different approaches and techniques for specific applications, such as particle-swarm optimization, Otsu’s function and harmony search optimization algorithm, triple gate silicon on insulator (SOI)MOSFET, micro-Raman and Fourier Transform Infrared Spectroscopy (FTIR) analysis, high-k dielectric gate oxide, spectrum sensing in cognitive radio, microstrip antenna, Ground-penetrating radar (GPR) with conducting surfaces, and digital image forgery detection. The contents of the book will be useful to academic and professional researchers alike.
Download or read book VLSI Circuits for Biomedical Applications written by Krzysztof Iniewski and published by Artech House. This book was released on 2008 with total page 453 pages. Available in PDF, EPUB and Kindle. Book excerpt: Supported with over 280 illustrations and over 160 equations, the book offers cutting-edge guidance on designing integrated circuits for wireless biosensing, body implants, biosensing interfaces, and molecular biology. You discover innovative design techniques and novel materials to help you achieve higher levels circuit and system performance.
