Download or read book Hybrid Anisotropic Materials for Wind Power Turbine Blades written by Yosif Golfman and published by CRC Press. This book was released on 2016-04-19 with total page 239 pages. Available in PDF, EPUB and Kindle. Book excerpt: Based on rapid technological developments in wind power, governments and energy corporations are aggressively investing in this natural resource. Illustrating some of the crucial new breakthroughs in structural design and application of wind energy generation machinery, Hybrid Anisotropic Materials for Wind Power Turbine Blades explores new automat

Download or read book Hybrid Anisotropic Materials for Structural Aviation Parts written by Yosif Golfman and published by CRC Press. This book was released on 2016-04-19 with total page 339 pages. Available in PDF, EPUB and Kindle. Book excerpt: Optimization of aviation and space vehicle design requires accurate assessment of the dynamic stability and general properties of hybrid materials used in aviation parts. Written by a professional with 40 years of experience in the field of composite research, Hybrid Anisotropic Materials for Structural Aviation Parts provides key analysis and application examples to help the reader establish a solid understanding of anisotropic properties, theory of laminates, and basic fabrication technologies. Tools to ensure cost-effective, optimized fabrication of aircraft, satellites, space vehicles, and more... With a focus on analytic modeling and dynamic analysis of anisotropic hybrid materials used in structural parts, this book assesses how and why design mechanisms either work or fail. It describes how current manufacturing techniques can apply alternative electronic and ultrasonic systems to improve the strength of an aircraft’s parts, reduce vibrations, and counteract deicing effects, among other vital requirements. Presenting valuable case studies involving manufacturers such as Boeing and DuPont, this book covers topics including: Nano composites, impregnation processes, and stress/strain analysis New techniques for analyzing interlaminar shear distribution sandwich/carbon/fiber/epoxy technologies Non-destructive methods, control technological parameters, and the influence of technological defects Use of carbon–silicon nanotubes and ceramic technology Strength criteria and analysis, and composite life prediction methodologies Dynamic aspects and stability of jetliners and lattice aviation structures Interlaminar shear stress analysis and possible failure Fatigue strength and vibration analysis This volume offers a useful, informative summary of the cutting-edge work being done in the field of high-performance composite materials, including fiberglass and carbon. With coverage of topics ranging from stress analysis and failure prediction to manufacturing methods and nondestructive inspection technology, it provides unique information to benefit a new generation of composite designers, graduate students, and industry professionals working with high-performance structures.

Download or read book Nanotechnology for Energy Sustainability written by Baldev Raj and published by John Wiley & Sons. This book was released on 2017-01-30 with total page 1284 pages. Available in PDF, EPUB and Kindle. Book excerpt: Dieses Referenzwerk in drei handlichen Bänden bietet einen detaillierten Überblick über Anwendungen der Nanotechnologie im Bereich Nachhaltigkeit in der Energieversorgung. Der erste Band dieses klar strukturierten Nachschlagewerks behandelt nach der Einleitung die Themen Energieerzeugung, erneuerbare Energien, Energiespeicherung, Energieverteilung sowie Energieumwandlung und Energy-Harvesting. Im zweiten Band werden auf Nanotechnologie basierte Materialen, Energieeinsparung und -management, technologische und urheberrechtlich relevante Fragen, Märkte und Umweltsanierung erörtert. Der dritte Band wirft einen Blick in die Zukunft, auf technologische Fortschritte und gibt Empfehlungen. Ein wichtiges Handbuch für alle Experten auf diesem Gebiet, von Forschern und Ingenieuren im wissenschaftlichen Bereich bis hin zu Entwicklern in der Industrie.

Download or read book Nanotechnology Applications in Energy Drug and Food written by Shafiquzzaman Siddiquee and published by Springer. This book was released on 2019-01-16 with total page 439 pages. Available in PDF, EPUB and Kindle. Book excerpt: Applications of nanotechnology are the remarkable sizes dependent on physiochemical properties of nanomaterials that have led to the developed protocols for synthesizing nanomaterials over a range of size, shapes and chemical compositions. Nanomaterials are normally powders composed of nanoparticles which exhibit properties that are different from powders. Nanotechnology is the engineering of functional systems at the molecular scale with their wide applications in energy sector, including -but not limited to- energy resources, energy conversion, energy storage, and energy usage; drug delivery systems including- safety concerns, perspective, challenges, target therapeutics for cancer, neurodegenerative diseases and other human diseases, nanomaterials based tissue engineering; and food sectors including to- food safety and quality, opportunities, challenges, nanomaterials based enhancing food packing, and determination of foodborne pathogens, agro and marine food, analysis of market, regulations and future prospects. The utilization of nanotechnology in the energy field will be emphasized and highlighted, in accordance to their prominent and high impact in this particular field. Recent trends and significant benefits of nanotechnology in the energy field will be revealed to the readers, and their promising advanced applications will be discussed. The current drug discovery paradigm constantly needs to improve, enhance efficiency and reduce time to the market on the basis of designing new drug discovery, drug delivery and pharmaceutical manufacturing. In this book will be highlighted nanotechnology based drug delivery is an important aspect of medicine, as more potent and specific drugs that are particularly discussed the understanding of disease pathways. Several biomaterials can be applied to small-molecule drugs as controlled release reservoirs for drug delivery and provide new insights into disease processes, thus understanding the mechanisms of action of drugs. Applications of food nanotechnology are an area of emerging interest for the food industry, for the reason, in this book will be given more priority to discuss the uses of nanomaterials for food packing, food safety and quality, and to remove the contaminated or spoiled by foodborne pathogens. And also nanotechnology based food products will be discussed how making them tastier, healthier, and more nutritious such as vitamins, to reduce fat content, and to ensure they do not degrade during a product’s shelf life. Nanotechnology is basically the uses of nanomaterials, devices and systems through the control of matter on the nanometer scale. Multidisciplinary studies are required the technology for discovery and moving so fast from concept to the reality. Nanotechnology always not only provided more benefits in energy, drugs and food products but also provided significantly benefits around multidisciplinary field applications.

Download or read book Passive Control of a Wind Turbine Blade Using Composite Materials written by Saad Bin Aziz and published by . This book was released on 2011 with total page 224 pages. Available in PDF, EPUB and Kindle. Book excerpt: The weight and the cost of the wind turbine are the two important considerations that make wind energy competitive with other energy source. The weight of the rotor is typically 40-80% of the total weight of the system. Thus, reducing cost by reducing the weight of the blade is an important consideration. Another important factor is the operational life of the machine, which is roughly 20 years of continuous service. Innovative design solutions are needed in order to meet the criteria of improved stiffness, fatigue life, reliability and efficiency. The directional property of anisotropic composite material can be used to passively control wind turbine blade structure. In the current research, a baseline wind turbine blade model of glass fiber and a carbon-hybrid model has been developed by replacing glass fiber in the spar cap region. In addition, the feasibility of using carbon fiber has been analyzed by comparing stress, strain and failure criteria analysis under different operating conditions.

Download or read book Advances in Wind Turbine Blade Design and Materials written by Povl Brondsted and published by Woodhead Publishing. This book was released on 2023-01-14 with total page 516 pages. Available in PDF, EPUB and Kindle. Book excerpt: Advances in Wind Turbine Blade Design and Materials, Second Edition, builds on the thorough review of the design and functionality of wind turbine rotor blades and the requirements and challenges for composite materials used in both current and future designs of wind turbine blades. Reviews the design and functionality of wind turbine rotor blades Examines the requirements and challenges for composite materials used in both current and future designs of wind turbine blades Provides an invaluable reference for researchers and innovators in the field of wind

Download or read book MARE WINT written by Wiesław Ostachowicz and published by Springer. This book was released on 2016-08-30 with total page 432 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book provides a holistic, interdisciplinary overview of offshore wind energy, and is a must-read for advanced researchers. Topics, from the design and analysis of future turbines, to the decommissioning of wind farms, are covered. The scope of the work ranges from analytical, numerical and experimental advancements in structural and fluid mechanics, to novel developments in risk, safety & reliability engineering for offshore wind.The core objective of the current work is to make offshore wind energy more competitive, by improving the reliability, and operations and maintenance (O&M) strategies of wind turbines. The research was carried out under the auspices of the EU-funded project, MARE-WINT. The project provided a unique opportunity for a group of researchers to work closely together, undergo multidisciplinary doctoral training, and conduct research in the area of offshore wind energy generation. Contributions from expert, external authors are also included, and the complete work seeks to bridge the gap between research and a rapidly-evolving industry.

Download or read book Advanced Composites in Aerospace Engineering Applications written by Norkhairunnisa Mazlan and published by Springer Nature. This book was released on 2022-02-21 with total page 517 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book presents an authoritative account of the potential of advanced composites such as composites, biocomposites, composites geopolymer, hybrid composites and hybrid biocomposites in aerospace application. It documents how in recent years, composite materials have grown in strength, stature, and significance to become a key material of enhanced scientific interest and resultant research into understanding their behavior for selection and safe use in a wide spectrum of technology-related applications. This collection highlights how their unique combination of superior properties such as low density, high strength, high elastic modulus, high hardness, high temperature capability, and excellent chemical and environmental stability are optimized in technologies within these field.

Download or read book Vibration and Structural Response of Hybrid Wind Turbine Blades written by Norimichi Nanami and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: Renewable energy is a serious alternative to deliver the energy needs of an increasing world population and improve economic activity. Wind energy provides better environmental and economic benefits in comparison with the other renewable energy sources. Wind energy is capable of providing 72 TW (TW = 1012 W) of electric power, which is approximately four and half times the world energy consumption of 15.8 TW as reported in 2006. Since power output extracted from wind turbines is proportional to the square of the blade length and the cube of the wind speed, wind turbine size has grown rapidly in the last two decades to match the increase in power output. As the blade length increases, so does its weight opening up design possibilities to introduce hybrid glass and carbon fiber composite materials as lightweight structural load bearing alternatives. Herein, we investigate the feasibility of introducing modular composite tubulars as well as hybrid sandwich composite skins in the next generation blades. After selecting a target energy output, 8 MW with 80 m blade, airfoil geometry and the layup for the skin as well as internal reinforcements are proposed. They are incorporated into the computational blade via linear shell elements for the skin, and linear beam elements for the composite tubulars to assess the relationship between weight reduction and structural performance. Computational simulations are undertaken to understand the static and dynamic regimes; specifically, displacements, stresses, and vibration modes. The results showed that the composite layers did not exhibit any damage. However, in the balsa core of the sandwich skin, the von Mises stress exceeded its allowable at wind speeds ranging from 11.0 m/sec to 12.6 m/sec. In the blades with composite tubular reinforcement, two different types of damage are observed: a. Stress concentrations at the tubular-skin attachments, and b. Highest von Mises stress caused by the flapping bending moment. The vibration studies revealed a strong coupling mode, bending and twist, at the higher natural frequencies of the blade with tubular truss configuration. The weight saving measures in developing lighter blades in this study did not detract from the blades structural response for the selected load cases.

Download or read book Advances in wind turbine blade design and materials written by J. G.Holierhoek and published by Elsevier Inc. Chapters. This book was released on 2013-10-31 with total page 30 pages. Available in PDF, EPUB and Kindle. Book excerpt: Aeroelasticity concerns the interaction between aerodynamics, dynamics and elasticity. This interaction can result in negatively or badly damped wind turbine blade modes, which can have a significant effect on the turbine lifetime. The first aeroelastic problem that occurred on commercial wind turbines concerned a negatively damped edgewise mode. It is important to ensure that there is some out-of-plane deformation in this mode shape to prevent the instability. For larger turbine blades with lower torsional stiffness and the possibility of higher tip speeds for the offshore designs, classical flutter could also become relevant. When designing a wind turbine blade, it is therefore crucial that there is enough damping for the different modes and that there is no coincidence of natural frequencies with excitation frequencies (resonance). An effective aeroelastic analysis is also important, and the tools used for such an analysis must include the necessary detail in the structural model.

Download or read book Structural Analysis of Composite Wind Turbine Blades written by Dimitris I Chortis and published by Springer Science & Business Media. This book was released on 2013-06-29 with total page 240 pages. Available in PDF, EPUB and Kindle. Book excerpt: This book concerns the development of novel finite elements for the structural analysis of composite beams and blades. The introduction of material damping is also an important aspect of composite structures and it is presented here in terms of their static and dynamic behavior. The book thoroughly presents a new shear beam finite element, which entails new blade section mechanics, capable of predicting structural blade coupling due to composite coupling and/or internal section geometry. Theoretical background is further expanded towards the inclusion of nonlinear structural blade models and damping mechanics for composite structures. The models effectively include geometrically nonlinear terms due to large displacements and rotations, improve the modeling accuracy of very large flexible blades, and enable the modeling of rotational stiffening and buckling, as well as, nonlinear structural coupling. Validation simulations on specimen level study the geometric nonlinearities effect on the modal frequencies and damping values of composite strips of various angle-ply laminations under either tensile or buckling loading. A series of correlation cases between numerical predictions and experimental measurements give credence to the developed nonlinear beam finite element models and underline the essential role of new nonlinear damping and stiffness terms.

Download or read book Advances in wind turbine blade design and materials written by F. Mølholt Jensen and published by Elsevier Inc. Chapters. This book was released on 2013-10-31 with total page 36 pages. Available in PDF, EPUB and Kindle. Book excerpt: An overview of the current and future trends in wind turbine blade structural design process is presented. The main design principles and failure mechanisms of blades in operation are assessed and explained through an industry point of view, in a realistic manner. A number of failure modes which are not addressed sufficiently in the certificate guidelines are presented. An example on how to use the new design philosophy is presented. The manufactured prototype is a 44m long load carrying spar and the weight is reduced by 40%.

Download or read book Advances in Wind Turbine Blade Design and Materials written by Povl Brondsted and published by Elsevier. This book was released on 2013-10-31 with total page 485 pages. Available in PDF, EPUB and Kindle. Book excerpt: Wind energy is gaining critical ground in the area of renewable energy, with wind energy being predicted to provide up to 8% of the world’s consumption of electricity by 2021. Advances in wind turbine blade design and materials reviews the design and functionality of wind turbine rotor blades as well as the requirements and challenges for composite materials used in both current and future designs of wind turbine blades. Part one outlines the challenges and developments in wind turbine blade design, including aerodynamic and aeroelastic design features, fatigue loads on wind turbine blades, and characteristics of wind turbine blade airfoils. Part two discusses the fatigue behavior of composite wind turbine blades, including the micromechanical modelling and fatigue life prediction of wind turbine blade composite materials, and the effects of resin and reinforcement variations on the fatigue resistance of wind turbine blades. The final part of the book describes advances in wind turbine blade materials, development and testing, including biobased composites, surface protection and coatings, structural performance testing and the design, manufacture and testing of small wind turbine blades. Advances in wind turbine blade design and materials offers a comprehensive review of the recent advances and challenges encountered in wind turbine blade materials and design, and will provide an invaluable reference for researchers and innovators in the field of wind energy production, including materials scientists and engineers, wind turbine blade manufacturers and maintenance technicians, scientists, researchers and academics. Reviews the design and functionality of wind turbine rotor blades Examines the requirements and challenges for composite materials used in both current and future designs of wind turbine blades Provides an invaluable reference for researchers and innovators in the field of wind energy production

Download or read book Advances in Wind Power written by Rupp Carriveau and published by BoD – Books on Demand. This book was released on 2012-11-21 with total page 378 pages. Available in PDF, EPUB and Kindle. Book excerpt: Today's wind energy industry is at a crossroads. Global economic instability has threatened or eliminated many financial incentives that have been important to the development of specific markets. Now more than ever, this essential element of the world energy mosaic will require innovative research and strategic collaborations to bolster the industry as it moves forward. This text details topics fundamental to the efficient operation of modern commercial farms and highlights advanced research that will enable next-generation wind energy technologies. The book is organized into three sections, Inflow and Wake Influences on Turbine Performance, Turbine Structural Response, and Power Conversion, Control and Integration. In addition to fundamental concepts, the reader will be exposed to comprehensive treatments of topics like wake dynamics, analysis of complex turbine blades, and power electronics in small-scale wind turbine systems.

Download or read book Temperature and Moisture Effects on Composite Materials for Wind Turbine Blades written by Mei Li and published by . This book was released on 2000 with total page 236 pages. Available in PDF, EPUB and Kindle. Book excerpt:

Download or read book An Innovative Technique for Evaluating the Integrity and Durability of Wind Turbine Blade Composites Final Project Report written by and published by . This book was released on 2011 with total page pages. Available in PDF, EPUB and Kindle. Book excerpt: To build increasingly larger, lightweight, and robust wind turbine blades for improved power output and cost efficiency, durability of the blade, largely resulting from its structural composites selection and aerodynamic shape design, is of paramount concern. The safe/reliable operation of structural components depends critically on the selection of materials that are resistant to damage and failure in the expected service environment. An effective surveillance program is also necessary to monitor the degradation of the materials in the course of service. Composite materials having high specific strength/stiffness are desirable for the construction of wind turbines. However, most high-strength materials tend to exhibit low fracture toughness. That is why the fracture toughness of the composite materials under consideration for the manufacture of the next generation of wind turbines deserves special attention. In order to achieve the above we have proposed to develop an innovative technology, based on spiral notch torsion test (SNTT) methodology, to effectively investigate the material performance of turbine blade composites. SNTT approach was successfully demonstrated and extended to both epoxy and glass fiber composite materials for wind turbine blades during the performance period. In addition to typical Mode I failure mechanism, the mixed-mode failure mechanism induced by the wind turbine service environments and/or the material mismatch of the composite materials was also effectively investigated using SNTT approach. The SNTT results indicate that the proposed protocol not only provides significant advance in understanding the composite failure mechanism, but also can be readily utilized to assist the development of new turbine blade composites.

Download or read book Critical Materials Strategy written by Steven Chu and published by DIANE Publishing. This book was released on 2011-05 with total page 166 pages. Available in PDF, EPUB and Kindle. Book excerpt: This report examines the role of rare earth metals and other materials in the clean energy economy. It was prepared by the U.S. Department of Energy (DoE) based on data collected and research performed during 2010. In the report, DoE describes plans to: (1) develop its first integrated research agenda addressing critical materials, building on three technical workshops convened by the DoE during November and December 2010; (2) strengthen its capacity for information-gathering on this topic; and (3) work closely with international partners, including Japan and Europe, to reduce vulnerability to supply disruptions and address critical material needs. Charts and tables. This is a print on demand report.